| /* |
| * Copyright (c) 2011 Peter Korsgaard <jacmet@sunsite.dk> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/hw_random.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| |
| #define TRNG_CR 0x00 |
| #define TRNG_MR 0x04 |
| #define TRNG_ISR 0x1c |
| #define TRNG_ISR_DATRDY BIT(0) |
| #define TRNG_ODATA 0x50 |
| |
| #define TRNG_KEY 0x524e4700 /* RNG */ |
| |
| #define TRNG_HALFR BIT(0) /* generate RN every 168 cycles */ |
| |
| struct atmel_trng_data { |
| bool has_half_rate; |
| }; |
| |
| struct atmel_trng { |
| struct clk *clk; |
| void __iomem *base; |
| struct hwrng rng; |
| bool has_half_rate; |
| }; |
| |
| static bool atmel_trng_wait_ready(struct atmel_trng *trng, bool wait) |
| { |
| int ready; |
| |
| ready = readl(trng->base + TRNG_ISR) & TRNG_ISR_DATRDY; |
| if (!ready && wait) |
| readl_poll_timeout(trng->base + TRNG_ISR, ready, |
| ready & TRNG_ISR_DATRDY, 1000, 20000); |
| |
| return !!ready; |
| } |
| |
| static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max, |
| bool wait) |
| { |
| struct atmel_trng *trng = container_of(rng, struct atmel_trng, rng); |
| u32 *data = buf; |
| int ret; |
| |
| ret = pm_runtime_get_sync((struct device *)trng->rng.priv); |
| if (ret < 0) { |
| pm_runtime_put_sync((struct device *)trng->rng.priv); |
| return ret; |
| } |
| |
| ret = atmel_trng_wait_ready(trng, wait); |
| if (!ret) |
| goto out; |
| |
| *data = readl(trng->base + TRNG_ODATA); |
| /* |
| * ensure data ready is only set again AFTER the next data word is ready |
| * in case it got set between checking ISR and reading ODATA, so we |
| * don't risk re-reading the same word |
| */ |
| readl(trng->base + TRNG_ISR); |
| ret = 4; |
| |
| out: |
| pm_runtime_mark_last_busy((struct device *)trng->rng.priv); |
| pm_runtime_put_sync_autosuspend((struct device *)trng->rng.priv); |
| return ret; |
| } |
| |
| static int atmel_trng_init(struct atmel_trng *trng) |
| { |
| unsigned long rate; |
| int ret; |
| |
| ret = clk_prepare_enable(trng->clk); |
| if (ret) |
| return ret; |
| |
| if (trng->has_half_rate) { |
| rate = clk_get_rate(trng->clk); |
| |
| /* if peripheral clk is above 100MHz, set HALFR */ |
| if (rate > 100000000) |
| writel(TRNG_HALFR, trng->base + TRNG_MR); |
| } |
| |
| writel(TRNG_KEY | 1, trng->base + TRNG_CR); |
| |
| return 0; |
| } |
| |
| static void atmel_trng_cleanup(struct atmel_trng *trng) |
| { |
| writel(TRNG_KEY, trng->base + TRNG_CR); |
| clk_disable_unprepare(trng->clk); |
| } |
| |
| static int atmel_trng_probe(struct platform_device *pdev) |
| { |
| struct atmel_trng *trng; |
| const struct atmel_trng_data *data; |
| int ret; |
| |
| trng = devm_kzalloc(&pdev->dev, sizeof(*trng), GFP_KERNEL); |
| if (!trng) |
| return -ENOMEM; |
| |
| trng->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(trng->base)) |
| return PTR_ERR(trng->base); |
| |
| trng->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(trng->clk)) |
| return PTR_ERR(trng->clk); |
| data = of_device_get_match_data(&pdev->dev); |
| if (!data) |
| return -ENODEV; |
| |
| trng->has_half_rate = data->has_half_rate; |
| trng->rng.name = pdev->name; |
| trng->rng.read = atmel_trng_read; |
| trng->rng.priv = (unsigned long)&pdev->dev; |
| platform_set_drvdata(pdev, trng); |
| |
| #ifndef CONFIG_PM |
| ret = atmel_trng_init(trng); |
| if (ret) |
| return ret; |
| #endif |
| |
| pm_runtime_set_autosuspend_delay(&pdev->dev, 100); |
| pm_runtime_use_autosuspend(&pdev->dev); |
| pm_runtime_enable(&pdev->dev); |
| |
| ret = devm_hwrng_register(&pdev->dev, &trng->rng); |
| if (ret) { |
| pm_runtime_disable(&pdev->dev); |
| pm_runtime_set_suspended(&pdev->dev); |
| #ifndef CONFIG_PM |
| atmel_trng_cleanup(trng); |
| #endif |
| } |
| |
| return ret; |
| } |
| |
| static void atmel_trng_remove(struct platform_device *pdev) |
| { |
| struct atmel_trng *trng = platform_get_drvdata(pdev); |
| |
| atmel_trng_cleanup(trng); |
| pm_runtime_disable(&pdev->dev); |
| pm_runtime_set_suspended(&pdev->dev); |
| } |
| |
| static int __maybe_unused atmel_trng_runtime_suspend(struct device *dev) |
| { |
| struct atmel_trng *trng = dev_get_drvdata(dev); |
| |
| atmel_trng_cleanup(trng); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused atmel_trng_runtime_resume(struct device *dev) |
| { |
| struct atmel_trng *trng = dev_get_drvdata(dev); |
| |
| return atmel_trng_init(trng); |
| } |
| |
| static const struct dev_pm_ops __maybe_unused atmel_trng_pm_ops = { |
| SET_RUNTIME_PM_OPS(atmel_trng_runtime_suspend, |
| atmel_trng_runtime_resume, NULL) |
| SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, |
| pm_runtime_force_resume) |
| }; |
| |
| static const struct atmel_trng_data at91sam9g45_config = { |
| .has_half_rate = false, |
| }; |
| |
| static const struct atmel_trng_data sam9x60_config = { |
| .has_half_rate = true, |
| }; |
| |
| static const struct of_device_id atmel_trng_dt_ids[] = { |
| { |
| .compatible = "atmel,at91sam9g45-trng", |
| .data = &at91sam9g45_config, |
| }, { |
| .compatible = "microchip,sam9x60-trng", |
| .data = &sam9x60_config, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(of, atmel_trng_dt_ids); |
| |
| static struct platform_driver atmel_trng_driver = { |
| .probe = atmel_trng_probe, |
| .remove_new = atmel_trng_remove, |
| .driver = { |
| .name = "atmel-trng", |
| .pm = pm_ptr(&atmel_trng_pm_ops), |
| .of_match_table = atmel_trng_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(atmel_trng_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>"); |
| MODULE_DESCRIPTION("Atmel true random number generator driver"); |