| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/clk-provider.h> |
| #include <linux/spinlock.h> |
| |
| #include <asm/krait-l2-accessors.h> |
| |
| #include "clk-krait.h" |
| |
| /* Secondary and primary muxes share the same cp15 register */ |
| static DEFINE_SPINLOCK(krait_clock_reg_lock); |
| |
| #define LPL_SHIFT 8 |
| #define SECCLKAGD BIT(4) |
| |
| static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel) |
| { |
| unsigned long flags; |
| u32 regval; |
| |
| spin_lock_irqsave(&krait_clock_reg_lock, flags); |
| |
| regval = krait_get_l2_indirect_reg(mux->offset); |
| |
| /* apq/ipq8064 Errata: disable sec_src clock gating during switch. */ |
| if (mux->disable_sec_src_gating) { |
| regval |= SECCLKAGD; |
| krait_set_l2_indirect_reg(mux->offset, regval); |
| } |
| |
| regval &= ~(mux->mask << mux->shift); |
| regval |= (sel & mux->mask) << mux->shift; |
| if (mux->lpl) { |
| regval &= ~(mux->mask << (mux->shift + LPL_SHIFT)); |
| regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT); |
| } |
| krait_set_l2_indirect_reg(mux->offset, regval); |
| |
| /* apq/ipq8064 Errata: re-enabled sec_src clock gating. */ |
| if (mux->disable_sec_src_gating) { |
| regval &= ~SECCLKAGD; |
| krait_set_l2_indirect_reg(mux->offset, regval); |
| } |
| |
| /* Wait for switch to complete. */ |
| mb(); |
| udelay(1); |
| |
| /* |
| * Unlock now to make sure the mux register is not |
| * modified while switching to the new parent. |
| */ |
| spin_unlock_irqrestore(&krait_clock_reg_lock, flags); |
| } |
| |
| static int krait_mux_set_parent(struct clk_hw *hw, u8 index) |
| { |
| struct krait_mux_clk *mux = to_krait_mux_clk(hw); |
| u32 sel; |
| |
| sel = clk_mux_index_to_val(mux->parent_map, 0, index); |
| mux->en_mask = sel; |
| /* Don't touch mux if CPU is off as it won't work */ |
| if (__clk_is_enabled(hw->clk)) |
| __krait_mux_set_sel(mux, sel); |
| |
| mux->reparent = true; |
| |
| return 0; |
| } |
| |
| static u8 krait_mux_get_parent(struct clk_hw *hw) |
| { |
| struct krait_mux_clk *mux = to_krait_mux_clk(hw); |
| u32 sel; |
| |
| sel = krait_get_l2_indirect_reg(mux->offset); |
| sel >>= mux->shift; |
| sel &= mux->mask; |
| mux->en_mask = sel; |
| |
| return clk_mux_val_to_index(hw, mux->parent_map, 0, sel); |
| } |
| |
| const struct clk_ops krait_mux_clk_ops = { |
| .set_parent = krait_mux_set_parent, |
| .get_parent = krait_mux_get_parent, |
| .determine_rate = __clk_mux_determine_rate_closest, |
| }; |
| EXPORT_SYMBOL_GPL(krait_mux_clk_ops); |
| |
| /* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */ |
| static int krait_div2_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) |
| { |
| req->best_parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), req->rate * 2); |
| req->rate = DIV_ROUND_UP(req->best_parent_rate, 2); |
| return 0; |
| } |
| |
| static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct krait_div2_clk *d = to_krait_div2_clk(hw); |
| unsigned long flags; |
| u32 val; |
| u32 mask = BIT(d->width) - 1; |
| |
| if (d->lpl) |
| mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift; |
| else |
| mask <<= d->shift; |
| |
| spin_lock_irqsave(&krait_clock_reg_lock, flags); |
| val = krait_get_l2_indirect_reg(d->offset); |
| val &= ~mask; |
| krait_set_l2_indirect_reg(d->offset, val); |
| spin_unlock_irqrestore(&krait_clock_reg_lock, flags); |
| |
| return 0; |
| } |
| |
| static unsigned long |
| krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) |
| { |
| struct krait_div2_clk *d = to_krait_div2_clk(hw); |
| u32 mask = BIT(d->width) - 1; |
| u32 div; |
| |
| div = krait_get_l2_indirect_reg(d->offset); |
| div >>= d->shift; |
| div &= mask; |
| div = (div + 1) * 2; |
| |
| return DIV_ROUND_UP(parent_rate, div); |
| } |
| |
| const struct clk_ops krait_div2_clk_ops = { |
| .determine_rate = krait_div2_determine_rate, |
| .set_rate = krait_div2_set_rate, |
| .recalc_rate = krait_div2_recalc_rate, |
| }; |
| EXPORT_SYMBOL_GPL(krait_div2_clk_ops); |