| // SPDX-License-Identifier: GPL-2.0-only |
| /* SF16-FMI, SF16-FMP and SF16-FMD radio driver for Linux radio support |
| * heavily based on rtrack driver... |
| * (c) 1997 M. Kirkwood |
| * (c) 1998 Petr Vandrovec, vandrove@vc.cvut.cz |
| * |
| * Fitted to new interface by Alan Cox <alan@lxorguk.ukuu.org.uk> |
| * Made working and cleaned up functions <mikael.hedin@irf.se> |
| * Support for ISAPnP by Ladislav Michl <ladis@psi.cz> |
| * |
| * Notes on the hardware |
| * |
| * Frequency control is done digitally -- ie out(port,encodefreq(95.8)); |
| * No volume control - only mute/unmute - you have to use line volume |
| * control on SB-part of SF16-FMI/SF16-FMP/SF16-FMD |
| * |
| * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org> |
| */ |
| |
| #include <linux/kernel.h> /* __setup */ |
| #include <linux/module.h> /* Modules */ |
| #include <linux/init.h> /* Initdata */ |
| #include <linux/ioport.h> /* request_region */ |
| #include <linux/delay.h> /* udelay */ |
| #include <linux/isapnp.h> |
| #include <linux/mutex.h> |
| #include <linux/videodev2.h> /* kernel radio structs */ |
| #include <linux/io.h> /* outb, outb_p */ |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-event.h> |
| #include "lm7000.h" |
| |
| MODULE_AUTHOR("Petr Vandrovec, vandrove@vc.cvut.cz and M. Kirkwood"); |
| MODULE_DESCRIPTION("A driver for the SF16-FMI, SF16-FMP and SF16-FMD radio."); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION("0.0.3"); |
| |
| static int io = -1; |
| static int radio_nr = -1; |
| |
| module_param(io, int, 0); |
| MODULE_PARM_DESC(io, "I/O address of the SF16-FMI/SF16-FMP/SF16-FMD card (0x284 or 0x384)"); |
| module_param(radio_nr, int, 0); |
| |
| struct fmi |
| { |
| struct v4l2_device v4l2_dev; |
| struct v4l2_ctrl_handler hdl; |
| struct video_device vdev; |
| int io; |
| bool mute; |
| u32 curfreq; /* freq in kHz */ |
| struct mutex lock; |
| }; |
| |
| static struct fmi fmi_card; |
| static struct pnp_dev *dev; |
| static bool pnp_attached; |
| |
| #define RSF16_MINFREQ (87U * 16000) |
| #define RSF16_MAXFREQ (108U * 16000) |
| |
| #define FMI_BIT_TUN_CE (1 << 0) |
| #define FMI_BIT_TUN_CLK (1 << 1) |
| #define FMI_BIT_TUN_DATA (1 << 2) |
| #define FMI_BIT_VOL_SW (1 << 3) |
| #define FMI_BIT_TUN_STRQ (1 << 4) |
| |
| static void fmi_set_pins(void *handle, u8 pins) |
| { |
| struct fmi *fmi = handle; |
| u8 bits = FMI_BIT_TUN_STRQ; |
| |
| if (!fmi->mute) |
| bits |= FMI_BIT_VOL_SW; |
| |
| if (pins & LM7000_DATA) |
| bits |= FMI_BIT_TUN_DATA; |
| if (pins & LM7000_CLK) |
| bits |= FMI_BIT_TUN_CLK; |
| if (pins & LM7000_CE) |
| bits |= FMI_BIT_TUN_CE; |
| |
| mutex_lock(&fmi->lock); |
| outb_p(bits, fmi->io); |
| mutex_unlock(&fmi->lock); |
| } |
| |
| static inline void fmi_mute(struct fmi *fmi) |
| { |
| mutex_lock(&fmi->lock); |
| outb(0x00, fmi->io); |
| mutex_unlock(&fmi->lock); |
| } |
| |
| static inline void fmi_unmute(struct fmi *fmi) |
| { |
| mutex_lock(&fmi->lock); |
| outb(0x08, fmi->io); |
| mutex_unlock(&fmi->lock); |
| } |
| |
| static inline int fmi_getsigstr(struct fmi *fmi) |
| { |
| int val; |
| int res; |
| |
| mutex_lock(&fmi->lock); |
| val = fmi->mute ? 0x00 : 0x08; /* mute/unmute */ |
| outb(val, fmi->io); |
| outb(val | 0x10, fmi->io); |
| msleep(143); /* was schedule_timeout(HZ/7) */ |
| res = (int)inb(fmi->io + 1); |
| outb(val, fmi->io); |
| |
| mutex_unlock(&fmi->lock); |
| return (res & 2) ? 0 : 0xFFFF; |
| } |
| |
| static void fmi_set_freq(struct fmi *fmi) |
| { |
| fmi->curfreq = clamp(fmi->curfreq, RSF16_MINFREQ, RSF16_MAXFREQ); |
| /* rounding in steps of 800 to match the freq |
| that will be used */ |
| lm7000_set_freq((fmi->curfreq / 800) * 800, fmi, fmi_set_pins); |
| } |
| |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *v) |
| { |
| strscpy(v->driver, "radio-sf16fmi", sizeof(v->driver)); |
| strscpy(v->card, "SF16-FMI/FMP/FMD radio", sizeof(v->card)); |
| strscpy(v->bus_info, "ISA:radio-sf16fmi", sizeof(v->bus_info)); |
| return 0; |
| } |
| |
| static int vidioc_g_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *v) |
| { |
| struct fmi *fmi = video_drvdata(file); |
| |
| if (v->index > 0) |
| return -EINVAL; |
| |
| strscpy(v->name, "FM", sizeof(v->name)); |
| v->type = V4L2_TUNER_RADIO; |
| v->rangelow = RSF16_MINFREQ; |
| v->rangehigh = RSF16_MAXFREQ; |
| v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; |
| v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW; |
| v->audmode = V4L2_TUNER_MODE_STEREO; |
| v->signal = fmi_getsigstr(fmi); |
| return 0; |
| } |
| |
| static int vidioc_s_tuner(struct file *file, void *priv, |
| const struct v4l2_tuner *v) |
| { |
| return v->index ? -EINVAL : 0; |
| } |
| |
| static int vidioc_s_frequency(struct file *file, void *priv, |
| const struct v4l2_frequency *f) |
| { |
| struct fmi *fmi = video_drvdata(file); |
| |
| if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) |
| return -EINVAL; |
| |
| fmi->curfreq = f->frequency; |
| fmi_set_freq(fmi); |
| |
| return 0; |
| } |
| |
| static int vidioc_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct fmi *fmi = video_drvdata(file); |
| |
| if (f->tuner != 0) |
| return -EINVAL; |
| f->type = V4L2_TUNER_RADIO; |
| f->frequency = fmi->curfreq; |
| return 0; |
| } |
| |
| static int fmi_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct fmi *fmi = container_of(ctrl->handler, struct fmi, hdl); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_MUTE: |
| if (ctrl->val) |
| fmi_mute(fmi); |
| else |
| fmi_unmute(fmi); |
| fmi->mute = ctrl->val; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static const struct v4l2_ctrl_ops fmi_ctrl_ops = { |
| .s_ctrl = fmi_s_ctrl, |
| }; |
| |
| static const struct v4l2_file_operations fmi_fops = { |
| .owner = THIS_MODULE, |
| .open = v4l2_fh_open, |
| .release = v4l2_fh_release, |
| .poll = v4l2_ctrl_poll, |
| .unlocked_ioctl = video_ioctl2, |
| }; |
| |
| static const struct v4l2_ioctl_ops fmi_ioctl_ops = { |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_g_tuner = vidioc_g_tuner, |
| .vidioc_s_tuner = vidioc_s_tuner, |
| .vidioc_g_frequency = vidioc_g_frequency, |
| .vidioc_s_frequency = vidioc_s_frequency, |
| .vidioc_log_status = v4l2_ctrl_log_status, |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, |
| }; |
| |
| /* ladis: this is my card. does any other types exist? */ |
| static struct isapnp_device_id id_table[] = { |
| /* SF16-FMI */ |
| { ISAPNP_ANY_ID, ISAPNP_ANY_ID, |
| ISAPNP_VENDOR('M','F','R'), ISAPNP_FUNCTION(0xad10), 0}, |
| /* SF16-FMD */ |
| { ISAPNP_ANY_ID, ISAPNP_ANY_ID, |
| ISAPNP_VENDOR('M','F','R'), ISAPNP_FUNCTION(0xad12), 0}, |
| { ISAPNP_CARD_END, }, |
| }; |
| |
| MODULE_DEVICE_TABLE(isapnp, id_table); |
| |
| static int __init isapnp_fmi_probe(void) |
| { |
| int i = 0; |
| |
| while (id_table[i].card_vendor != 0 && dev == NULL) { |
| dev = pnp_find_dev(NULL, id_table[i].vendor, |
| id_table[i].function, NULL); |
| i++; |
| } |
| |
| if (!dev) |
| return -ENODEV; |
| if (pnp_device_attach(dev) < 0) |
| return -EAGAIN; |
| if (pnp_activate_dev(dev) < 0) { |
| printk(KERN_ERR "radio-sf16fmi: PnP configure failed (out of resources?)\n"); |
| pnp_device_detach(dev); |
| return -ENOMEM; |
| } |
| if (!pnp_port_valid(dev, 0)) { |
| pnp_device_detach(dev); |
| return -ENODEV; |
| } |
| |
| i = pnp_port_start(dev, 0); |
| printk(KERN_INFO "radio-sf16fmi: PnP reports card at %#x\n", i); |
| |
| return i; |
| } |
| |
| static int __init fmi_init(void) |
| { |
| struct fmi *fmi = &fmi_card; |
| struct v4l2_device *v4l2_dev = &fmi->v4l2_dev; |
| struct v4l2_ctrl_handler *hdl = &fmi->hdl; |
| int res, i; |
| static const int probe_ports[] = { 0, 0x284, 0x384 }; |
| |
| if (io < 0) { |
| for (i = 0; i < ARRAY_SIZE(probe_ports); i++) { |
| io = probe_ports[i]; |
| if (io == 0) { |
| io = isapnp_fmi_probe(); |
| if (io < 0) |
| continue; |
| pnp_attached = true; |
| } |
| if (!request_region(io, 2, "radio-sf16fmi")) { |
| if (pnp_attached) |
| pnp_device_detach(dev); |
| io = -1; |
| continue; |
| } |
| if (pnp_attached || |
| ((inb(io) & 0xf9) == 0xf9 && (inb(io) & 0x4) == 0)) |
| break; |
| release_region(io, 2); |
| io = -1; |
| } |
| } else { |
| if (!request_region(io, 2, "radio-sf16fmi")) { |
| printk(KERN_ERR "radio-sf16fmi: port %#x already in use\n", io); |
| return -EBUSY; |
| } |
| if (inb(io) == 0xff) { |
| printk(KERN_ERR "radio-sf16fmi: card not present at %#x\n", io); |
| release_region(io, 2); |
| return -ENODEV; |
| } |
| } |
| if (io < 0) { |
| printk(KERN_ERR "radio-sf16fmi: no cards found\n"); |
| return -ENODEV; |
| } |
| |
| strscpy(v4l2_dev->name, "sf16fmi", sizeof(v4l2_dev->name)); |
| fmi->io = io; |
| |
| res = v4l2_device_register(NULL, v4l2_dev); |
| if (res < 0) { |
| release_region(fmi->io, 2); |
| if (pnp_attached) |
| pnp_device_detach(dev); |
| v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); |
| return res; |
| } |
| |
| v4l2_ctrl_handler_init(hdl, 1); |
| v4l2_ctrl_new_std(hdl, &fmi_ctrl_ops, |
| V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); |
| v4l2_dev->ctrl_handler = hdl; |
| if (hdl->error) { |
| res = hdl->error; |
| v4l2_err(v4l2_dev, "Could not register controls\n"); |
| v4l2_ctrl_handler_free(hdl); |
| v4l2_device_unregister(v4l2_dev); |
| return res; |
| } |
| |
| strscpy(fmi->vdev.name, v4l2_dev->name, sizeof(fmi->vdev.name)); |
| fmi->vdev.v4l2_dev = v4l2_dev; |
| fmi->vdev.fops = &fmi_fops; |
| fmi->vdev.ioctl_ops = &fmi_ioctl_ops; |
| fmi->vdev.release = video_device_release_empty; |
| fmi->vdev.device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO; |
| video_set_drvdata(&fmi->vdev, fmi); |
| |
| mutex_init(&fmi->lock); |
| |
| /* mute card and set default frequency */ |
| fmi->mute = true; |
| fmi->curfreq = RSF16_MINFREQ; |
| fmi_set_freq(fmi); |
| |
| if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { |
| v4l2_ctrl_handler_free(hdl); |
| v4l2_device_unregister(v4l2_dev); |
| release_region(fmi->io, 2); |
| if (pnp_attached) |
| pnp_device_detach(dev); |
| return -EINVAL; |
| } |
| |
| v4l2_info(v4l2_dev, "card driver at 0x%x\n", fmi->io); |
| return 0; |
| } |
| |
| static void __exit fmi_exit(void) |
| { |
| struct fmi *fmi = &fmi_card; |
| |
| v4l2_ctrl_handler_free(&fmi->hdl); |
| video_unregister_device(&fmi->vdev); |
| v4l2_device_unregister(&fmi->v4l2_dev); |
| release_region(fmi->io, 2); |
| if (dev && pnp_attached) |
| pnp_device_detach(dev); |
| } |
| |
| module_init(fmi_init); |
| module_exit(fmi_exit); |