| /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ |
| /* |
| * Copyright (C) 2008-2014, 2018-2024 Intel Corporation |
| * Copyright (C) 2013-2015 Intel Mobile Communications GmbH |
| * Copyright (C) 2016-2017 Intel Deutschland GmbH |
| */ |
| #ifndef __iwl_fw_file_h__ |
| #define __iwl_fw_file_h__ |
| |
| #include <linux/netdevice.h> |
| #include <linux/nl80211.h> |
| |
| /* v1/v2 uCode file layout */ |
| struct iwl_ucode_header { |
| __le32 ver; /* major/minor/API/serial */ |
| union { |
| struct { |
| __le32 inst_size; /* bytes of runtime code */ |
| __le32 data_size; /* bytes of runtime data */ |
| __le32 init_size; /* bytes of init code */ |
| __le32 init_data_size; /* bytes of init data */ |
| __le32 boot_size; /* bytes of bootstrap code */ |
| u8 data[]; /* in same order as sizes */ |
| } v1; |
| struct { |
| __le32 build; /* build number */ |
| __le32 inst_size; /* bytes of runtime code */ |
| __le32 data_size; /* bytes of runtime data */ |
| __le32 init_size; /* bytes of init code */ |
| __le32 init_data_size; /* bytes of init data */ |
| __le32 boot_size; /* bytes of bootstrap code */ |
| u8 data[]; /* in same order as sizes */ |
| } v2; |
| } u; |
| }; |
| |
| #define IWL_UCODE_TLV_DEBUG_BASE 0x1000005 |
| #define IWL_UCODE_TLV_CONST_BASE 0x100 |
| |
| /* |
| * new TLV uCode file layout |
| * |
| * The new TLV file format contains TLVs, that each specify |
| * some piece of data. |
| */ |
| |
| enum iwl_ucode_tlv_type { |
| IWL_UCODE_TLV_INVALID = 0, /* unused */ |
| IWL_UCODE_TLV_INST = 1, |
| IWL_UCODE_TLV_DATA = 2, |
| IWL_UCODE_TLV_INIT = 3, |
| IWL_UCODE_TLV_INIT_DATA = 4, |
| IWL_UCODE_TLV_BOOT = 5, |
| IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a u32 value */ |
| IWL_UCODE_TLV_PAN = 7, /* deprecated -- only used in DVM */ |
| IWL_UCODE_TLV_MEM_DESC = 7, /* replaces PAN in non-DVM */ |
| IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8, |
| IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9, |
| IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10, |
| IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11, |
| IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12, |
| IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13, |
| IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14, |
| IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15, |
| IWL_UCODE_TLV_WOWLAN_INST = 16, |
| IWL_UCODE_TLV_WOWLAN_DATA = 17, |
| IWL_UCODE_TLV_FLAGS = 18, |
| IWL_UCODE_TLV_SEC_RT = 19, |
| IWL_UCODE_TLV_SEC_INIT = 20, |
| IWL_UCODE_TLV_SEC_WOWLAN = 21, |
| IWL_UCODE_TLV_DEF_CALIB = 22, |
| IWL_UCODE_TLV_PHY_SKU = 23, |
| IWL_UCODE_TLV_SECURE_SEC_RT = 24, |
| IWL_UCODE_TLV_SECURE_SEC_INIT = 25, |
| IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26, |
| IWL_UCODE_TLV_NUM_OF_CPU = 27, |
| IWL_UCODE_TLV_CSCHEME = 28, |
| IWL_UCODE_TLV_API_CHANGES_SET = 29, |
| IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30, |
| IWL_UCODE_TLV_N_SCAN_CHANNELS = 31, |
| IWL_UCODE_TLV_PAGING = 32, |
| IWL_UCODE_TLV_SEC_RT_USNIFFER = 34, |
| /* 35 is unused */ |
| IWL_UCODE_TLV_FW_VERSION = 36, |
| IWL_UCODE_TLV_FW_DBG_DEST = 38, |
| IWL_UCODE_TLV_FW_DBG_CONF = 39, |
| IWL_UCODE_TLV_FW_DBG_TRIGGER = 40, |
| IWL_UCODE_TLV_CMD_VERSIONS = 48, |
| IWL_UCODE_TLV_FW_GSCAN_CAPA = 50, |
| IWL_UCODE_TLV_FW_MEM_SEG = 51, |
| IWL_UCODE_TLV_IML = 52, |
| IWL_UCODE_TLV_UMAC_DEBUG_ADDRS = 54, |
| IWL_UCODE_TLV_LMAC_DEBUG_ADDRS = 55, |
| IWL_UCODE_TLV_FW_RECOVERY_INFO = 57, |
| IWL_UCODE_TLV_HW_TYPE = 58, |
| IWL_UCODE_TLV_FW_FSEQ_VERSION = 60, |
| IWL_UCODE_TLV_PHY_INTEGRATION_VERSION = 61, |
| |
| IWL_UCODE_TLV_PNVM_VERSION = 62, |
| IWL_UCODE_TLV_PNVM_SKU = 64, |
| |
| IWL_UCODE_TLV_SEC_TABLE_ADDR = 66, |
| IWL_UCODE_TLV_D3_KEK_KCK_ADDR = 67, |
| IWL_UCODE_TLV_CURRENT_PC = 68, |
| |
| IWL_UCODE_TLV_FW_NUM_STATIONS = IWL_UCODE_TLV_CONST_BASE + 0, |
| IWL_UCODE_TLV_FW_NUM_BEACONS = IWL_UCODE_TLV_CONST_BASE + 2, |
| |
| IWL_UCODE_TLV_TYPE_DEBUG_INFO = IWL_UCODE_TLV_DEBUG_BASE + 0, |
| IWL_UCODE_TLV_TYPE_BUFFER_ALLOCATION = IWL_UCODE_TLV_DEBUG_BASE + 1, |
| IWL_UCODE_TLV_TYPE_HCMD = IWL_UCODE_TLV_DEBUG_BASE + 2, |
| IWL_UCODE_TLV_TYPE_REGIONS = IWL_UCODE_TLV_DEBUG_BASE + 3, |
| IWL_UCODE_TLV_TYPE_TRIGGERS = IWL_UCODE_TLV_DEBUG_BASE + 4, |
| IWL_UCODE_TLV_TYPE_CONF_SET = IWL_UCODE_TLV_DEBUG_BASE + 5, |
| IWL_UCODE_TLV_DEBUG_MAX = IWL_UCODE_TLV_TYPE_TRIGGERS, |
| |
| /* TLVs 0x1000-0x2000 are for internal driver usage */ |
| IWL_UCODE_TLV_FW_DBG_DUMP_LST = 0x1000, |
| }; |
| |
| struct iwl_ucode_tlv { |
| __le32 type; /* see above */ |
| __le32 length; /* not including type/length fields */ |
| u8 data[]; |
| }; |
| |
| #define IWL_TLV_UCODE_MAGIC 0x0a4c5749 |
| #define FW_VER_HUMAN_READABLE_SZ 64 |
| |
| struct iwl_tlv_ucode_header { |
| /* |
| * The TLV style ucode header is distinguished from |
| * the v1/v2 style header by first four bytes being |
| * zero, as such is an invalid combination of |
| * major/minor/API/serial versions. |
| */ |
| __le32 zero; |
| __le32 magic; |
| u8 human_readable[FW_VER_HUMAN_READABLE_SZ]; |
| /* major/minor/API/serial or major in new format */ |
| __le32 ver; |
| __le32 build; |
| __le64 ignore; |
| /* |
| * The data contained herein has a TLV layout, |
| * see above for the TLV header and types. |
| * Note that each TLV is padded to a length |
| * that is a multiple of 4 for alignment. |
| */ |
| u8 data[]; |
| }; |
| |
| /* |
| * ucode TLVs |
| * |
| * ability to get extension for: flags & capabilities from ucode binaries files |
| */ |
| struct iwl_ucode_api { |
| __le32 api_index; |
| __le32 api_flags; |
| } __packed; |
| |
| struct iwl_ucode_capa { |
| __le32 api_index; |
| __le32 api_capa; |
| } __packed; |
| |
| /** |
| * enum iwl_ucode_tlv_flag - ucode API flags |
| * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously |
| * was a separate TLV but moved here to save space. |
| * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID, |
| * treats good CRC threshold as a boolean |
| * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). |
| * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD |
| * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of block list instead of 64 in scan |
| * offload profile config command. |
| * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six |
| * (rather than two) IPv6 addresses |
| * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element |
| * from the probe request template. |
| * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) |
| * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) |
| * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD |
| * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save |
| * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS. |
| */ |
| enum iwl_ucode_tlv_flag { |
| IWL_UCODE_TLV_FLAGS_PAN = BIT(0), |
| IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1), |
| IWL_UCODE_TLV_FLAGS_MFP = BIT(2), |
| IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7), |
| IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10), |
| IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12), |
| IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15), |
| IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16), |
| IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24), |
| IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25), |
| IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26), |
| }; |
| |
| typedef unsigned int __bitwise iwl_ucode_tlv_api_t; |
| |
| /** |
| * enum iwl_ucode_tlv_api - ucode api |
| * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time |
| * longer than the passive one, which is essential for fragmented scan. |
| * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. |
| * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params |
| * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format |
| * @IWL_UCODE_TLV_API_SCAN_TSF_REPORT: Scan start time reported in scan |
| * iteration complete notification, and the timestamp reported for RX |
| * received during scan, are reported in TSF of the mac specified in the |
| * scan request. |
| * @IWL_UCODE_TLV_API_TKIP_MIC_KEYS: This ucode supports version 2 of |
| * ADD_MODIFY_STA_KEY_API_S_VER_2. |
| * @IWL_UCODE_TLV_API_STA_TYPE: This ucode supports station type assignement. |
| * @IWL_UCODE_TLV_API_NAN2_VER2: This ucode supports NAN API version 2 |
| * @IWL_UCODE_TLV_API_ADAPTIVE_DWELL: support for adaptive dwell in scanning |
| * @IWL_UCODE_TLV_API_NEW_RX_STATS: should new RX STATISTICS API be used |
| * @IWL_UCODE_TLV_API_QUOTA_LOW_LATENCY: Quota command includes a field |
| * indicating low latency direction. |
| * @IWL_UCODE_TLV_API_DEPRECATE_TTAK: RX status flag TTAK ok (bit 7) is |
| * deprecated. |
| * @IWL_UCODE_TLV_API_ADAPTIVE_DWELL_V2: This ucode supports version 8 |
| * of scan request: SCAN_REQUEST_CMD_UMAC_API_S_VER_8 |
| * @IWL_UCODE_TLV_API_FRAG_EBS: This ucode supports fragmented EBS |
| * @IWL_UCODE_TLV_API_REDUCE_TX_POWER: This ucode supports v5 of |
| * the REDUCE_TX_POWER_CMD. |
| * @IWL_UCODE_TLV_API_SHORT_BEACON_NOTIF: This ucode supports the short |
| * version of the beacon notification. |
| * @IWL_UCODE_TLV_API_BEACON_FILTER_V4: This ucode supports v4 of |
| * BEACON_FILTER_CONFIG_API_S_VER_4. |
| * @IWL_UCODE_TLV_API_REGULATORY_NVM_INFO: This ucode supports v4 of |
| * REGULATORY_NVM_GET_INFO_RSP_API_S. |
| * @IWL_UCODE_TLV_API_FTM_NEW_RANGE_REQ: This ucode supports v7 of |
| * LOCATION_RANGE_REQ_CMD_API_S and v6 of LOCATION_RANGE_RESP_NTFY_API_S. |
| * @IWL_UCODE_TLV_API_SCAN_OFFLOAD_CHANS: This ucode supports v2 of |
| * SCAN_OFFLOAD_PROFILE_MATCH_RESULTS_S and v3 of |
| * SCAN_OFFLOAD_PROFILES_QUERY_RSP_S. |
| * @IWL_UCODE_TLV_API_MBSSID_HE: This ucode supports v2 of |
| * STA_CONTEXT_DOT11AX_API_S |
| * @IWL_UCODE_TLV_API_FTM_RTT_ACCURACY: version 7 of the range response API |
| * is supported by FW, this indicates the RTT confidence value |
| * @IWL_UCODE_TLV_API_SAR_TABLE_VER: This ucode supports different sar |
| * version tables. |
| * @IWL_UCODE_TLV_API_REDUCED_SCAN_CONFIG: This ucode supports v3 of |
| * SCAN_CONFIG_DB_CMD_API_S. |
| * @IWL_UCODE_TLV_API_ADWELL_HB_DEF_N_AP: support for setting adaptive dwell |
| * number of APs in the 5 GHz band |
| * @IWL_UCODE_TLV_API_BAND_IN_RX_DATA: FW reports band number in RX notification |
| * @IWL_UCODE_TLV_API_NO_HOST_DISABLE_TX: Firmware offloaded the station disable tx |
| * logic. |
| * @IWL_UCODE_TLV_API_INT_DBG_BUF_CLEAR: Firmware supports clearing the debug |
| * internal buffer |
| * @IWL_UCODE_TLV_API_SMART_FIFO_OFFLOAD: Firmware doesn't need the host to |
| * configure the smart fifo |
| * |
| * @NUM_IWL_UCODE_TLV_API: number of bits used |
| */ |
| enum iwl_ucode_tlv_api { |
| /* API Set 0 */ |
| IWL_UCODE_TLV_API_FRAGMENTED_SCAN = (__force iwl_ucode_tlv_api_t)8, |
| IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9, |
| IWL_UCODE_TLV_API_LQ_SS_PARAMS = (__force iwl_ucode_tlv_api_t)18, |
| IWL_UCODE_TLV_API_NEW_VERSION = (__force iwl_ucode_tlv_api_t)20, |
| IWL_UCODE_TLV_API_SCAN_TSF_REPORT = (__force iwl_ucode_tlv_api_t)28, |
| IWL_UCODE_TLV_API_TKIP_MIC_KEYS = (__force iwl_ucode_tlv_api_t)29, |
| IWL_UCODE_TLV_API_STA_TYPE = (__force iwl_ucode_tlv_api_t)30, |
| IWL_UCODE_TLV_API_NAN2_VER2 = (__force iwl_ucode_tlv_api_t)31, |
| /* API Set 1 */ |
| IWL_UCODE_TLV_API_ADAPTIVE_DWELL = (__force iwl_ucode_tlv_api_t)32, |
| IWL_UCODE_TLV_API_OCE = (__force iwl_ucode_tlv_api_t)33, |
| IWL_UCODE_TLV_API_NEW_BEACON_TEMPLATE = (__force iwl_ucode_tlv_api_t)34, |
| IWL_UCODE_TLV_API_NEW_RX_STATS = (__force iwl_ucode_tlv_api_t)35, |
| IWL_UCODE_TLV_API_WOWLAN_KEY_MATERIAL = (__force iwl_ucode_tlv_api_t)36, |
| IWL_UCODE_TLV_API_QUOTA_LOW_LATENCY = (__force iwl_ucode_tlv_api_t)38, |
| IWL_UCODE_TLV_API_DEPRECATE_TTAK = (__force iwl_ucode_tlv_api_t)41, |
| IWL_UCODE_TLV_API_ADAPTIVE_DWELL_V2 = (__force iwl_ucode_tlv_api_t)42, |
| IWL_UCODE_TLV_API_FRAG_EBS = (__force iwl_ucode_tlv_api_t)44, |
| IWL_UCODE_TLV_API_REDUCE_TX_POWER = (__force iwl_ucode_tlv_api_t)45, |
| IWL_UCODE_TLV_API_SHORT_BEACON_NOTIF = (__force iwl_ucode_tlv_api_t)46, |
| IWL_UCODE_TLV_API_BEACON_FILTER_V4 = (__force iwl_ucode_tlv_api_t)47, |
| IWL_UCODE_TLV_API_REGULATORY_NVM_INFO = (__force iwl_ucode_tlv_api_t)48, |
| IWL_UCODE_TLV_API_FTM_NEW_RANGE_REQ = (__force iwl_ucode_tlv_api_t)49, |
| IWL_UCODE_TLV_API_SCAN_OFFLOAD_CHANS = (__force iwl_ucode_tlv_api_t)50, |
| IWL_UCODE_TLV_API_MBSSID_HE = (__force iwl_ucode_tlv_api_t)52, |
| IWL_UCODE_TLV_API_WOWLAN_TCP_SYN_WAKE = (__force iwl_ucode_tlv_api_t)53, |
| IWL_UCODE_TLV_API_FTM_RTT_ACCURACY = (__force iwl_ucode_tlv_api_t)54, |
| IWL_UCODE_TLV_API_SAR_TABLE_VER = (__force iwl_ucode_tlv_api_t)55, |
| IWL_UCODE_TLV_API_REDUCED_SCAN_CONFIG = (__force iwl_ucode_tlv_api_t)56, |
| IWL_UCODE_TLV_API_ADWELL_HB_DEF_N_AP = (__force iwl_ucode_tlv_api_t)57, |
| IWL_UCODE_TLV_API_SCAN_EXT_CHAN_VER = (__force iwl_ucode_tlv_api_t)58, |
| IWL_UCODE_TLV_API_BAND_IN_RX_DATA = (__force iwl_ucode_tlv_api_t)59, |
| /* API Set 2 */ |
| IWL_UCODE_TLV_API_NO_HOST_DISABLE_TX = (__force iwl_ucode_tlv_api_t)66, |
| IWL_UCODE_TLV_API_INT_DBG_BUF_CLEAR = (__force iwl_ucode_tlv_api_t)67, |
| IWL_UCODE_TLV_API_SMART_FIFO_OFFLOAD = (__force iwl_ucode_tlv_api_t)68, |
| |
| NUM_IWL_UCODE_TLV_API |
| /* |
| * This construction make both sparse (which cannot increment the previous |
| * member due to its bitwise type) and kernel-doc (which doesn't understand |
| * the ifdef/else properly) work. |
| */ |
| #ifdef __CHECKER__ |
| #define __CHECKER_NUM_IWL_UCODE_TLV_API 128 |
| = (__force iwl_ucode_tlv_api_t)__CHECKER_NUM_IWL_UCODE_TLV_API, |
| #define NUM_IWL_UCODE_TLV_API __CHECKER_NUM_IWL_UCODE_TLV_API |
| #endif |
| }; |
| |
| typedef unsigned int __bitwise iwl_ucode_tlv_capa_t; |
| |
| /** |
| * enum iwl_ucode_tlv_capa - ucode capabilities |
| * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 |
| * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory |
| * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. |
| * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer |
| * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality |
| * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current |
| * tx power value into TPC Report action frame and Link Measurement Report |
| * action frame |
| * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current |
| * channel in DS parameter set element in probe requests. |
| * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in |
| * probe requests. |
| * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests |
| * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA), |
| * which also implies support for the scheduler configuration command |
| * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching |
| * @IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image |
| * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command |
| * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload |
| * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics |
| * @IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD: supports U-APSD on p2p interface when it |
| * is standalone or with a BSS station interface in the same binding. |
| * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running |
| * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different |
| * sources for the MCC. This TLV bit is a future replacement to |
| * IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR |
| * is supported. |
| * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC |
| * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan (no longer used) |
| * @IWL_UCODE_TLV_CAPA_FRAGMENTED_PNVM_IMG: supports fragmented PNVM image |
| * @IWL_UCODE_TLV_CAPA_SOC_LATENCY_SUPPORT: the firmware supports setting |
| * stabilization latency for SoCs. |
| * @IWL_UCODE_TLV_CAPA_STA_PM_NOTIF: firmware will send STA PM notification |
| * @IWL_UCODE_TLV_CAPA_TLC_OFFLOAD: firmware implements rate scaling algorithm |
| * @IWL_UCODE_TLV_CAPA_DYNAMIC_QUOTA: firmware implements quota related |
| * @IWL_UCODE_TLV_CAPA_COEX_SCHEMA_2: firmware implements Coex Schema 2 |
| * IWL_UCODE_TLV_CAPA_CHANNEL_SWITCH_CMD: firmware supports CSA command |
| * @IWL_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS: firmware supports ultra high band |
| * (6 GHz). |
| * @IWL_UCODE_TLV_CAPA_CS_MODIFY: firmware supports modify action CSA command |
| * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement |
| * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts |
| * @IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT |
| * @IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD: the firmware supports CSA |
| * countdown offloading. Beacon notifications are not sent to the host. |
| * The fw also offloads TBTT alignment. |
| * @IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what |
| * antenna the beacon should be transmitted |
| * @IWL_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon |
| * from AP and will send it upon d0i3 exit. |
| * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V3: support LAR API V3 |
| * @IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill |
| * @IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature |
| * thresholds reporting |
| * @IWL_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command |
| * @IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in |
| * regular image. |
| * @IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared |
| * memory addresses from the firmware. |
| * @IWL_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement |
| * @IWL_UCODE_TLV_CAPA_TX_POWER_ACK: reduced TX power API has larger |
| * command size (command version 4) that supports toggling ACK TX |
| * power reduction. |
| * @IWL_UCODE_TLV_CAPA_D3_DEBUG: supports debug recording during D3 |
| * @IWL_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT: MCC response support 11ax |
| * capability. |
| * @IWL_UCODE_TLV_CAPA_CSI_REPORTING: firmware is capable of being configured |
| * to report the CSI information with (certain) RX frames |
| * @IWL_UCODE_TLV_CAPA_FTM_CALIBRATED: has FTM calibrated and thus supports both |
| * initiator and responder |
| * @IWL_UCODE_TLV_CAPA_MLME_OFFLOAD: supports MLME offload |
| * @IWL_UCODE_TLV_CAPA_PROTECTED_TWT: Supports protection of TWT action frames |
| * @IWL_UCODE_TLV_CAPA_FW_RESET_HANDSHAKE: Supports the firmware handshake in |
| * reset flow |
| * @IWL_UCODE_TLV_CAPA_PASSIVE_6GHZ_SCAN: Support for passive scan on 6GHz PSC |
| * channels even when these are not enabled. |
| * @IWL_UCODE_TLV_CAPA_DUMP_COMPLETE_SUPPORT: Support for indicating dump collection |
| * complete to FW. |
| * @IWL_UCODE_TLV_CAPA_SPP_AMSDU_SUPPORT: Support SPP (signaling and payload |
| * protected) A-MSDU. |
| * @IWL_UCODE_TLV_CAPA_SECURE_LTF_SUPPORT: Support secure LTF measurement. |
| * |
| * @NUM_IWL_UCODE_TLV_CAPA: number of bits used |
| */ |
| enum iwl_ucode_tlv_capa { |
| /* set 0 */ |
| IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = (__force iwl_ucode_tlv_capa_t)0, |
| IWL_UCODE_TLV_CAPA_LAR_SUPPORT = (__force iwl_ucode_tlv_capa_t)1, |
| IWL_UCODE_TLV_CAPA_UMAC_SCAN = (__force iwl_ucode_tlv_capa_t)2, |
| IWL_UCODE_TLV_CAPA_BEAMFORMER = (__force iwl_ucode_tlv_capa_t)3, |
| IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = (__force iwl_ucode_tlv_capa_t)6, |
| IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = (__force iwl_ucode_tlv_capa_t)8, |
| IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)9, |
| IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)10, |
| IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = (__force iwl_ucode_tlv_capa_t)11, |
| IWL_UCODE_TLV_CAPA_DQA_SUPPORT = (__force iwl_ucode_tlv_capa_t)12, |
| IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = (__force iwl_ucode_tlv_capa_t)13, |
| IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG = (__force iwl_ucode_tlv_capa_t)17, |
| IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = (__force iwl_ucode_tlv_capa_t)18, |
| IWL_UCODE_TLV_CAPA_CSUM_SUPPORT = (__force iwl_ucode_tlv_capa_t)21, |
| IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = (__force iwl_ucode_tlv_capa_t)22, |
| IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD = (__force iwl_ucode_tlv_capa_t)26, |
| IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = (__force iwl_ucode_tlv_capa_t)28, |
| IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = (__force iwl_ucode_tlv_capa_t)29, |
| IWL_UCODE_TLV_CAPA_BT_COEX_RRC = (__force iwl_ucode_tlv_capa_t)30, |
| IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)31, |
| |
| /* set 1 */ |
| IWL_UCODE_TLV_CAPA_FRAGMENTED_PNVM_IMG = (__force iwl_ucode_tlv_capa_t)32, |
| IWL_UCODE_TLV_CAPA_SOC_LATENCY_SUPPORT = (__force iwl_ucode_tlv_capa_t)37, |
| IWL_UCODE_TLV_CAPA_STA_PM_NOTIF = (__force iwl_ucode_tlv_capa_t)38, |
| IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT = (__force iwl_ucode_tlv_capa_t)39, |
| IWL_UCODE_TLV_CAPA_CDB_SUPPORT = (__force iwl_ucode_tlv_capa_t)40, |
| IWL_UCODE_TLV_CAPA_D0I3_END_FIRST = (__force iwl_ucode_tlv_capa_t)41, |
| IWL_UCODE_TLV_CAPA_TLC_OFFLOAD = (__force iwl_ucode_tlv_capa_t)43, |
| IWL_UCODE_TLV_CAPA_DYNAMIC_QUOTA = (__force iwl_ucode_tlv_capa_t)44, |
| IWL_UCODE_TLV_CAPA_COEX_SCHEMA_2 = (__force iwl_ucode_tlv_capa_t)45, |
| IWL_UCODE_TLV_CAPA_CHANNEL_SWITCH_CMD = (__force iwl_ucode_tlv_capa_t)46, |
| IWL_UCODE_TLV_CAPA_FTM_CALIBRATED = (__force iwl_ucode_tlv_capa_t)47, |
| IWL_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS = (__force iwl_ucode_tlv_capa_t)48, |
| IWL_UCODE_TLV_CAPA_CS_MODIFY = (__force iwl_ucode_tlv_capa_t)49, |
| IWL_UCODE_TLV_CAPA_SET_LTR_GEN2 = (__force iwl_ucode_tlv_capa_t)50, |
| IWL_UCODE_TLV_CAPA_SET_PPAG = (__force iwl_ucode_tlv_capa_t)52, |
| IWL_UCODE_TLV_CAPA_TAS_CFG = (__force iwl_ucode_tlv_capa_t)53, |
| IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD = (__force iwl_ucode_tlv_capa_t)54, |
| IWL_UCODE_TLV_CAPA_PROTECTED_TWT = (__force iwl_ucode_tlv_capa_t)56, |
| IWL_UCODE_TLV_CAPA_FW_RESET_HANDSHAKE = (__force iwl_ucode_tlv_capa_t)57, |
| IWL_UCODE_TLV_CAPA_PASSIVE_6GHZ_SCAN = (__force iwl_ucode_tlv_capa_t)58, |
| IWL_UCODE_TLV_CAPA_HIDDEN_6GHZ_SCAN = (__force iwl_ucode_tlv_capa_t)59, |
| IWL_UCODE_TLV_CAPA_BROADCAST_TWT = (__force iwl_ucode_tlv_capa_t)60, |
| IWL_UCODE_TLV_CAPA_COEX_HIGH_PRIO = (__force iwl_ucode_tlv_capa_t)61, |
| IWL_UCODE_TLV_CAPA_RFIM_SUPPORT = (__force iwl_ucode_tlv_capa_t)62, |
| IWL_UCODE_TLV_CAPA_BAID_ML_SUPPORT = (__force iwl_ucode_tlv_capa_t)63, |
| |
| /* set 2 */ |
| IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE = (__force iwl_ucode_tlv_capa_t)64, |
| IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS = (__force iwl_ucode_tlv_capa_t)65, |
| IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT = (__force iwl_ucode_tlv_capa_t)67, |
| IWL_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT = (__force iwl_ucode_tlv_capa_t)68, |
| IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD = (__force iwl_ucode_tlv_capa_t)70, |
| IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION = (__force iwl_ucode_tlv_capa_t)71, |
| IWL_UCODE_TLV_CAPA_BEACON_STORING = (__force iwl_ucode_tlv_capa_t)72, |
| IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V3 = (__force iwl_ucode_tlv_capa_t)73, |
| IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW = (__force iwl_ucode_tlv_capa_t)74, |
| IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT = (__force iwl_ucode_tlv_capa_t)75, |
| IWL_UCODE_TLV_CAPA_CTDP_SUPPORT = (__force iwl_ucode_tlv_capa_t)76, |
| IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED = (__force iwl_ucode_tlv_capa_t)77, |
| IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG = (__force iwl_ucode_tlv_capa_t)80, |
| IWL_UCODE_TLV_CAPA_LQM_SUPPORT = (__force iwl_ucode_tlv_capa_t)81, |
| IWL_UCODE_TLV_CAPA_TX_POWER_ACK = (__force iwl_ucode_tlv_capa_t)84, |
| IWL_UCODE_TLV_CAPA_D3_DEBUG = (__force iwl_ucode_tlv_capa_t)87, |
| IWL_UCODE_TLV_CAPA_LED_CMD_SUPPORT = (__force iwl_ucode_tlv_capa_t)88, |
| IWL_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT = (__force iwl_ucode_tlv_capa_t)89, |
| IWL_UCODE_TLV_CAPA_CSI_REPORTING = (__force iwl_ucode_tlv_capa_t)90, |
| IWL_UCODE_TLV_CAPA_DBG_SUSPEND_RESUME_CMD_SUPP = (__force iwl_ucode_tlv_capa_t)92, |
| IWL_UCODE_TLV_CAPA_DBG_BUF_ALLOC_CMD_SUPP = (__force iwl_ucode_tlv_capa_t)93, |
| |
| /* set 3 */ |
| IWL_UCODE_TLV_CAPA_MLME_OFFLOAD = (__force iwl_ucode_tlv_capa_t)96, |
| |
| /* |
| * @IWL_UCODE_TLV_CAPA_PSC_CHAN_SUPPORT: supports PSC channels |
| */ |
| IWL_UCODE_TLV_CAPA_PSC_CHAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)98, |
| |
| IWL_UCODE_TLV_CAPA_BIGTK_SUPPORT = (__force iwl_ucode_tlv_capa_t)100, |
| IWL_UCODE_TLV_CAPA_SPP_AMSDU_SUPPORT = (__force iwl_ucode_tlv_capa_t)103, |
| IWL_UCODE_TLV_CAPA_DRAM_FRAG_SUPPORT = (__force iwl_ucode_tlv_capa_t)104, |
| IWL_UCODE_TLV_CAPA_DUMP_COMPLETE_SUPPORT = (__force iwl_ucode_tlv_capa_t)105, |
| IWL_UCODE_TLV_CAPA_SYNCED_TIME = (__force iwl_ucode_tlv_capa_t)106, |
| IWL_UCODE_TLV_CAPA_TIME_SYNC_BOTH_FTM_TM = (__force iwl_ucode_tlv_capa_t)108, |
| IWL_UCODE_TLV_CAPA_BIGTK_TX_SUPPORT = (__force iwl_ucode_tlv_capa_t)109, |
| IWL_UCODE_TLV_CAPA_MLD_API_SUPPORT = (__force iwl_ucode_tlv_capa_t)110, |
| IWL_UCODE_TLV_CAPA_SCAN_DONT_TOGGLE_ANT = (__force iwl_ucode_tlv_capa_t)111, |
| IWL_UCODE_TLV_CAPA_PPAG_CHINA_BIOS_SUPPORT = (__force iwl_ucode_tlv_capa_t)112, |
| IWL_UCODE_TLV_CAPA_OFFLOAD_BTM_SUPPORT = (__force iwl_ucode_tlv_capa_t)113, |
| IWL_UCODE_TLV_CAPA_STA_EXP_MFP_SUPPORT = (__force iwl_ucode_tlv_capa_t)114, |
| IWL_UCODE_TLV_CAPA_SNIFF_VALIDATE_SUPPORT = (__force iwl_ucode_tlv_capa_t)116, |
| IWL_UCODE_TLV_CAPA_CHINA_22_REG_SUPPORT = (__force iwl_ucode_tlv_capa_t)117, |
| IWL_UCODE_TLV_CAPA_SECURE_LTF_SUPPORT = (__force iwl_ucode_tlv_capa_t)121, |
| NUM_IWL_UCODE_TLV_CAPA |
| /* |
| * This construction make both sparse (which cannot increment the previous |
| * member due to its bitwise type) and kernel-doc (which doesn't understand |
| * the ifdef/else properly) work. |
| */ |
| #ifdef __CHECKER__ |
| #define __CHECKER_NUM_IWL_UCODE_TLV_CAPA 128 |
| = (__force iwl_ucode_tlv_capa_t)__CHECKER_NUM_IWL_UCODE_TLV_CAPA, |
| #define NUM_IWL_UCODE_TLV_CAPA __CHECKER_NUM_IWL_UCODE_TLV_CAPA |
| #endif |
| }; |
| |
| /* The default calibrate table size if not specified by firmware file */ |
| #define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 |
| #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 |
| #define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253 |
| |
| /* The default max probe length if not specified by the firmware file */ |
| #define IWL_DEFAULT_MAX_PROBE_LENGTH 200 |
| |
| /* |
| * For 16.0 uCode and above, there is no differentiation between sections, |
| * just an offset to the HW address. |
| */ |
| #define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC |
| #define PAGING_SEPARATOR_SECTION 0xAAAABBBB |
| |
| /* uCode version contains 4 values: Major/Minor/API/Serial */ |
| #define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) |
| #define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) |
| #define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) |
| #define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) |
| |
| /** |
| * struct iwl_tlv_calib_ctrl - Calibration control struct. |
| * Sent as part of the phy configuration command. |
| * @flow_trigger: bitmap for which calibrations to perform according to |
| * flow triggers. |
| * @event_trigger: bitmap for which calibrations to perform according to |
| * event triggers. |
| */ |
| struct iwl_tlv_calib_ctrl { |
| __le32 flow_trigger; |
| __le32 event_trigger; |
| } __packed; |
| |
| enum iwl_fw_phy_cfg { |
| FW_PHY_CFG_RADIO_TYPE_POS = 0, |
| FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS, |
| FW_PHY_CFG_RADIO_STEP_POS = 2, |
| FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS, |
| FW_PHY_CFG_RADIO_DASH_POS = 4, |
| FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS, |
| FW_PHY_CFG_TX_CHAIN_POS = 16, |
| FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS, |
| FW_PHY_CFG_RX_CHAIN_POS = 20, |
| FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS, |
| FW_PHY_CFG_CHAIN_SAD_POS = 23, |
| FW_PHY_CFG_CHAIN_SAD_ENABLED = 0x1 << FW_PHY_CFG_CHAIN_SAD_POS, |
| FW_PHY_CFG_CHAIN_SAD_ANT_A = 0x2 << FW_PHY_CFG_CHAIN_SAD_POS, |
| FW_PHY_CFG_CHAIN_SAD_ANT_B = 0x4 << FW_PHY_CFG_CHAIN_SAD_POS, |
| FW_PHY_CFG_SHARED_CLK = BIT(31), |
| }; |
| |
| enum iwl_fw_dbg_reg_operator { |
| CSR_ASSIGN, |
| CSR_SETBIT, |
| CSR_CLEARBIT, |
| |
| PRPH_ASSIGN, |
| PRPH_SETBIT, |
| PRPH_CLEARBIT, |
| |
| INDIRECT_ASSIGN, |
| INDIRECT_SETBIT, |
| INDIRECT_CLEARBIT, |
| |
| PRPH_BLOCKBIT, |
| }; |
| |
| /** |
| * struct iwl_fw_dbg_reg_op - an operation on a register |
| * |
| * @op: &enum iwl_fw_dbg_reg_operator |
| * @reserved: reserved |
| * @addr: offset of the register |
| * @val: value |
| */ |
| struct iwl_fw_dbg_reg_op { |
| u8 op; |
| u8 reserved[3]; |
| __le32 addr; |
| __le32 val; |
| } __packed; |
| |
| /** |
| * enum iwl_fw_dbg_monitor_mode - available monitor recording modes |
| * |
| * @SMEM_MODE: monitor stores the data in SMEM |
| * @EXTERNAL_MODE: monitor stores the data in allocated DRAM |
| * @MARBH_MODE: monitor stores the data in MARBH buffer |
| * @MIPI_MODE: monitor outputs the data through the MIPI interface |
| */ |
| enum iwl_fw_dbg_monitor_mode { |
| SMEM_MODE = 0, |
| EXTERNAL_MODE = 1, |
| MARBH_MODE = 2, |
| MIPI_MODE = 3, |
| }; |
| |
| /** |
| * struct iwl_fw_dbg_mem_seg_tlv - configures the debug data memory segments |
| * |
| * @data_type: the memory segment type to record |
| * @ofs: the memory segment offset |
| * @len: the memory segment length, in bytes |
| * |
| * This parses IWL_UCODE_TLV_FW_MEM_SEG |
| */ |
| struct iwl_fw_dbg_mem_seg_tlv { |
| __le32 data_type; |
| __le32 ofs; |
| __le32 len; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_dest_tlv_v1 - configures the destination of the debug data |
| * |
| * @version: version of the TLV - currently 0 |
| * @monitor_mode: &enum iwl_fw_dbg_monitor_mode |
| * @size_power: buffer size will be 2^(size_power + 11) |
| * @reserved: reserved |
| * @base_reg: addr of the base addr register (PRPH) |
| * @end_reg: addr of the end addr register (PRPH) |
| * @write_ptr_reg: the addr of the reg of the write pointer |
| * @wrap_count: the addr of the reg of the wrap_count |
| * @base_shift: shift right of the base addr reg |
| * @end_shift: shift right of the end addr reg |
| * @reg_ops: array of registers operations |
| * |
| * This parses IWL_UCODE_TLV_FW_DBG_DEST |
| */ |
| struct iwl_fw_dbg_dest_tlv_v1 { |
| u8 version; |
| u8 monitor_mode; |
| u8 size_power; |
| u8 reserved; |
| __le32 base_reg; |
| __le32 end_reg; |
| __le32 write_ptr_reg; |
| __le32 wrap_count; |
| u8 base_shift; |
| u8 end_shift; |
| struct iwl_fw_dbg_reg_op reg_ops[]; |
| } __packed; |
| |
| /* Mask of the register for defining the LDBG MAC2SMEM buffer SMEM size */ |
| #define IWL_LDBG_M2S_BUF_SIZE_MSK 0x0fff0000 |
| /* Mask of the register for defining the LDBG MAC2SMEM SMEM base address */ |
| #define IWL_LDBG_M2S_BUF_BA_MSK 0x00000fff |
| /* The smem buffer chunks are in units of 256 bits */ |
| #define IWL_M2S_UNIT_SIZE 0x100 |
| |
| struct iwl_fw_dbg_dest_tlv { |
| u8 version; |
| u8 monitor_mode; |
| u8 size_power; |
| u8 reserved; |
| __le32 cfg_reg; |
| __le32 write_ptr_reg; |
| __le32 wrap_count; |
| u8 base_shift; |
| u8 size_shift; |
| struct iwl_fw_dbg_reg_op reg_ops[]; |
| } __packed; |
| |
| struct iwl_fw_dbg_conf_hcmd { |
| u8 id; |
| u8 reserved; |
| __le16 len; |
| u8 data[]; |
| } __packed; |
| |
| /** |
| * enum iwl_fw_dbg_trigger_mode - triggers functionalities |
| * |
| * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism |
| * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data |
| * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to |
| * collect only monitor data |
| */ |
| enum iwl_fw_dbg_trigger_mode { |
| IWL_FW_DBG_TRIGGER_START = BIT(0), |
| IWL_FW_DBG_TRIGGER_STOP = BIT(1), |
| IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2), |
| }; |
| |
| /** |
| * enum iwl_fw_dbg_trigger_flags - the flags supported by wrt triggers |
| * @IWL_FW_DBG_FORCE_RESTART: force a firmware restart |
| */ |
| enum iwl_fw_dbg_trigger_flags { |
| IWL_FW_DBG_FORCE_RESTART = BIT(0), |
| }; |
| |
| /** |
| * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger |
| * @IWL_FW_DBG_CONF_VIF_ANY: any vif type |
| * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode |
| * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode |
| * @IWL_FW_DBG_CONF_VIF_AP: AP mode |
| * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode |
| * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode |
| * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device |
| */ |
| enum iwl_fw_dbg_trigger_vif_type { |
| IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED, |
| IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC, |
| IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION, |
| IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP, |
| IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT, |
| IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO, |
| IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE, |
| }; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger |
| * @id: &enum iwl_fw_dbg_trigger |
| * @vif_type: &enum iwl_fw_dbg_trigger_vif_type |
| * @stop_conf_ids: bitmap of configurations this trigger relates to. |
| * if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding |
| * to the currently running configuration is set, the data should be |
| * collected. |
| * @stop_delay: how many milliseconds to wait before collecting the data |
| * after the STOP trigger fires. |
| * @mode: &enum iwl_fw_dbg_trigger_mode - can be stop / start of both |
| * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what |
| * configuration should be applied when the triggers kicks in. |
| * @occurrences: number of occurrences. 0 means the trigger will never fire. |
| * @trig_dis_ms: the time, in milliseconds, after an occurrence of this |
| * trigger in which another occurrence should be ignored. |
| * @flags: &enum iwl_fw_dbg_trigger_flags |
| * @reserved: reserved (for alignment) |
| * @data: trigger data |
| */ |
| struct iwl_fw_dbg_trigger_tlv { |
| __le32 id; |
| __le32 vif_type; |
| __le32 stop_conf_ids; |
| __le32 stop_delay; |
| u8 mode; |
| u8 start_conf_id; |
| __le16 occurrences; |
| __le16 trig_dis_ms; |
| u8 flags; |
| u8 reserved[5]; |
| |
| u8 data[]; |
| } __packed; |
| |
| #define FW_DBG_START_FROM_ALIVE 0 |
| #define FW_DBG_CONF_MAX 32 |
| #define FW_DBG_INVALID 0xff |
| |
| /** |
| * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons |
| * @stop_consec_missed_bcon: stop recording if threshold is crossed. |
| * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed. |
| * @start_consec_missed_bcon: start recording if threshold is crossed. |
| * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed. |
| * @reserved1: reserved |
| * @reserved2: reserved |
| */ |
| struct iwl_fw_dbg_trigger_missed_bcon { |
| __le32 stop_consec_missed_bcon; |
| __le32 stop_consec_missed_bcon_since_rx; |
| __le32 reserved2[2]; |
| __le32 start_consec_missed_bcon; |
| __le32 start_consec_missed_bcon_since_rx; |
| __le32 reserved1[2]; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW. |
| * @cmds: the list of commands to trigger the collection on |
| */ |
| struct iwl_fw_dbg_trigger_cmd { |
| struct cmd { |
| u8 cmd_id; |
| u8 group_id; |
| } __packed cmds[16]; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_stats - configures trigger for statistics |
| * @stop_offset: the offset of the value to be monitored |
| * @stop_threshold: the threshold above which to collect |
| * @start_offset: the offset of the value to be monitored |
| * @start_threshold: the threshold above which to start recording |
| */ |
| struct iwl_fw_dbg_trigger_stats { |
| __le32 stop_offset; |
| __le32 stop_threshold; |
| __le32 start_offset; |
| __le32 start_threshold; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI |
| * @rssi: RSSI value to trigger at |
| */ |
| struct iwl_fw_dbg_trigger_low_rssi { |
| __le32 rssi; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events |
| * @stop_auth_denied: number of denied authentication to collect |
| * @stop_auth_timeout: number of authentication timeout to collect |
| * @stop_rx_deauth: number of Rx deauth before to collect |
| * @stop_tx_deauth: number of Tx deauth before to collect |
| * @stop_assoc_denied: number of denied association to collect |
| * @stop_assoc_timeout: number of association timeout to collect |
| * @stop_connection_loss: number of connection loss to collect |
| * @start_auth_denied: number of denied authentication to start recording |
| * @start_auth_timeout: number of authentication timeout to start recording |
| * @start_rx_deauth: number of Rx deauth to start recording |
| * @start_tx_deauth: number of Tx deauth to start recording |
| * @start_assoc_denied: number of denied association to start recording |
| * @start_assoc_timeout: number of association timeout to start recording |
| * @start_connection_loss: number of connection loss to start recording |
| */ |
| struct iwl_fw_dbg_trigger_mlme { |
| u8 stop_auth_denied; |
| u8 stop_auth_timeout; |
| u8 stop_rx_deauth; |
| u8 stop_tx_deauth; |
| |
| u8 stop_assoc_denied; |
| u8 stop_assoc_timeout; |
| u8 stop_connection_loss; |
| u8 reserved; |
| |
| u8 start_auth_denied; |
| u8 start_auth_timeout; |
| u8 start_rx_deauth; |
| u8 start_tx_deauth; |
| |
| u8 start_assoc_denied; |
| u8 start_assoc_timeout; |
| u8 start_connection_loss; |
| u8 reserved2; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer |
| * @command_queue: timeout for the command queue in ms |
| * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms |
| * @softap: timeout for the queues of a softAP in ms |
| * @p2p_go: timeout for the queues of a P2P GO in ms |
| * @p2p_client: timeout for the queues of a P2P client in ms |
| * @p2p_device: timeout for the queues of a P2P device in ms |
| * @ibss: timeout for the queues of an IBSS in ms |
| * @tdls: timeout for the queues of a TDLS station in ms |
| */ |
| struct iwl_fw_dbg_trigger_txq_timer { |
| __le32 command_queue; |
| __le32 bss; |
| __le32 softap; |
| __le32 p2p_go; |
| __le32 p2p_client; |
| __le32 p2p_device; |
| __le32 ibss; |
| __le32 tdls; |
| __le32 reserved[4]; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger |
| * time_Events: a list of tuples <id, action_bitmap>. The driver will issue a |
| * trigger each time a time event notification that relates to time event |
| * id with one of the actions in the bitmap is received and |
| * BIT(notif->status) is set in status_bitmap. |
| * |
| */ |
| struct iwl_fw_dbg_trigger_time_event { |
| struct { |
| __le32 id; |
| __le32 action_bitmap; |
| __le32 status_bitmap; |
| } __packed time_events[16]; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger |
| * rx_ba_start: tid bitmap to configure on what tid the trigger should occur |
| * when an Rx BlockAck session is started. |
| * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur |
| * when an Rx BlockAck session is stopped. |
| * tx_ba_start: tid bitmap to configure on what tid the trigger should occur |
| * when a Tx BlockAck session is started. |
| * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur |
| * when a Tx BlockAck session is stopped. |
| * rx_bar: tid bitmap to configure on what tid the trigger should occur |
| * when a BAR is received (for a Tx BlockAck session). |
| * tx_bar: tid bitmap to configure on what tid the trigger should occur |
| * when a BAR is send (for an Rx BlocAck session). |
| * frame_timeout: tid bitmap to configure on what tid the trigger should occur |
| * when a frame times out in the reordering buffer. |
| */ |
| struct iwl_fw_dbg_trigger_ba { |
| __le16 rx_ba_start; |
| __le16 rx_ba_stop; |
| __le16 tx_ba_start; |
| __le16 tx_ba_stop; |
| __le16 rx_bar; |
| __le16 tx_bar; |
| __le16 frame_timeout; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_tdls - configures trigger for TDLS events. |
| * @action_bitmap: the TDLS action to trigger the collection upon |
| * @peer_mode: trigger on specific peer or all |
| * @peer: the TDLS peer to trigger the collection on |
| */ |
| struct iwl_fw_dbg_trigger_tdls { |
| u8 action_bitmap; |
| u8 peer_mode; |
| u8 peer[ETH_ALEN]; |
| u8 reserved[4]; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_tx_status - configures trigger for tx response |
| * status. |
| * @statuses: the list of statuses to trigger the collection on |
| */ |
| struct iwl_fw_dbg_trigger_tx_status { |
| struct tx_status { |
| u8 status; |
| u8 reserved[3]; |
| } __packed statuses[16]; |
| __le32 reserved[2]; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration. |
| * @id: conf id |
| * @usniffer: should the uSniffer image be used |
| * @num_of_hcmds: how many HCMDs to send are present here |
| * @hcmd: a variable length host command to be sent to apply the configuration. |
| * If there is more than one HCMD to send, they will appear one after the |
| * other and be sent in the order that they appear in. |
| * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to |
| * %FW_DBG_CONF_MAX configuration per run. |
| */ |
| struct iwl_fw_dbg_conf_tlv { |
| u8 id; |
| u8 usniffer; |
| u8 reserved; |
| u8 num_of_hcmds; |
| struct iwl_fw_dbg_conf_hcmd hcmd; |
| } __packed; |
| |
| #define IWL_FW_CMD_VER_UNKNOWN 99 |
| |
| /** |
| * struct iwl_fw_cmd_version - firmware command version entry |
| * @cmd: command ID |
| * @group: group ID |
| * @cmd_ver: command version |
| * @notif_ver: notification version |
| */ |
| struct iwl_fw_cmd_version { |
| u8 cmd; |
| u8 group; |
| u8 cmd_ver; |
| u8 notif_ver; |
| } __packed; |
| |
| struct iwl_fw_tcm_error_addr { |
| __le32 addr; |
| }; /* FW_TLV_TCM_ERROR_INFO_ADDRS_S */ |
| |
| struct iwl_fw_dump_exclude { |
| __le32 addr, size; |
| }; |
| |
| static inline size_t _iwl_tlv_array_len(const struct iwl_ucode_tlv *tlv, |
| size_t fixed_size, size_t var_size) |
| { |
| size_t var_len = le32_to_cpu(tlv->length) - fixed_size; |
| |
| if (WARN_ON(var_len % var_size)) |
| return 0; |
| |
| return var_len / var_size; |
| } |
| |
| #define iwl_tlv_array_len(_tlv_ptr, _struct_ptr, _memb) \ |
| _iwl_tlv_array_len((_tlv_ptr), sizeof(*(_struct_ptr)), \ |
| sizeof(_struct_ptr->_memb[0])) |
| |
| #define iwl_tlv_array_len_with_size(_tlv_ptr, _struct_ptr, _size) \ |
| _iwl_tlv_array_len((_tlv_ptr), sizeof(*(_struct_ptr)), _size) |
| #endif /* __iwl_fw_file_h__ */ |