| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for Analog Devices (Linear Technology) LTC4162-L charger IC. |
| * Copyright (C) 2020, Topic Embedded Products |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/of.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/power_supply.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| |
| /* Registers (names based on what datasheet uses) */ |
| #define LTC4162L_EN_LIMIT_ALERTS_REG 0x0D |
| #define LTC4162L_EN_CHARGER_STATE_ALERTS_REG 0x0E |
| #define LTC4162L_EN_CHARGE_STATUS_ALERTS_REG 0x0F |
| #define LTC4162L_CONFIG_BITS_REG 0x14 |
| #define LTC4162L_IIN_LIMIT_TARGET 0x15 |
| #define LTC4162L_ARM_SHIP_MODE 0x19 |
| #define LTC4162L_CHARGE_CURRENT_SETTING 0X1A |
| #define LTC4162L_VCHARGE_SETTING 0X1B |
| #define LTC4162L_C_OVER_X_THRESHOLD 0x1C |
| #define LTC4162L_MAX_CV_TIME 0X1D |
| #define LTC4162L_MAX_CHARGE_TIME 0X1E |
| #define LTC4162L_CHARGER_CONFIG_BITS 0x29 |
| #define LTC4162L_CHARGER_STATE 0x34 |
| #define LTC4162L_CHARGE_STATUS 0x35 |
| #define LTC4162L_LIMIT_ALERTS_REG 0x36 |
| #define LTC4162L_CHARGER_STATE_ALERTS_REG 0x37 |
| #define LTC4162L_CHARGE_STATUS_ALERTS_REG 0x38 |
| #define LTC4162L_SYSTEM_STATUS_REG 0x39 |
| #define LTC4162L_VBAT 0x3A |
| #define LTC4162L_VIN 0x3B |
| #define LTC4162L_VOUT 0x3C |
| #define LTC4162L_IBAT 0x3D |
| #define LTC4162L_IIN 0x3E |
| #define LTC4162L_DIE_TEMPERATURE 0x3F |
| #define LTC4162L_THERMISTOR_VOLTAGE 0x40 |
| #define LTC4162L_BSR 0x41 |
| #define LTC4162L_JEITA_REGION 0x42 |
| #define LTC4162L_CHEM_CELLS_REG 0x43 |
| #define LTC4162L_ICHARGE_DAC 0x44 |
| #define LTC4162L_VCHARGE_DAC 0x45 |
| #define LTC4162L_IIN_LIMIT_DAC 0x46 |
| #define LTC4162L_VBAT_FILT 0x47 |
| #define LTC4162L_INPUT_UNDERVOLTAGE_DAC 0x4B |
| |
| /* Enumeration as in datasheet. Individual bits are mutually exclusive. */ |
| enum ltc4162l_state { |
| battery_detection = 2048, |
| charger_suspended = 256, |
| precharge = 128, /* trickle on low bat voltage */ |
| cc_cv_charge = 64, /* normal charge */ |
| ntc_pause = 32, |
| timer_term = 16, |
| c_over_x_term = 8, /* battery is full */ |
| max_charge_time_fault = 4, |
| bat_missing_fault = 2, |
| bat_short_fault = 1 |
| }; |
| |
| /* Individual bits are mutually exclusive. Only active in charging states.*/ |
| enum ltc4162l_charge_status { |
| ilim_reg_active = 32, |
| thermal_reg_active = 16, |
| vin_uvcl_active = 8, |
| iin_limit_active = 4, |
| constant_current = 2, |
| constant_voltage = 1, |
| charger_off = 0 |
| }; |
| |
| /* Magic number to write to ARM_SHIP_MODE register */ |
| #define LTC4162L_ARM_SHIP_MODE_MAGIC 21325 |
| |
| struct ltc4162l_info { |
| struct i2c_client *client; |
| struct regmap *regmap; |
| struct power_supply *charger; |
| u32 rsnsb; /* Series resistor that sets charge current, microOhm */ |
| u32 rsnsi; /* Series resistor to measure input current, microOhm */ |
| u8 cell_count; /* Number of connected cells, 0 while unknown */ |
| }; |
| |
| static u8 ltc4162l_get_cell_count(struct ltc4162l_info *info) |
| { |
| int ret; |
| unsigned int val; |
| |
| /* Once read successfully */ |
| if (info->cell_count) |
| return info->cell_count; |
| |
| ret = regmap_read(info->regmap, LTC4162L_CHEM_CELLS_REG, &val); |
| if (ret) |
| return 0; |
| |
| /* Lower 4 bits is the cell count, or 0 if the chip doesn't know yet */ |
| val &= 0x0f; |
| if (!val) |
| return 0; |
| |
| /* Once determined, keep the value */ |
| info->cell_count = val; |
| |
| return val; |
| }; |
| |
| /* Convert enum value to POWER_SUPPLY_STATUS value */ |
| static int ltc4162l_state_decode(enum ltc4162l_state value) |
| { |
| switch (value) { |
| case precharge: |
| case cc_cv_charge: |
| return POWER_SUPPLY_STATUS_CHARGING; |
| case c_over_x_term: |
| return POWER_SUPPLY_STATUS_FULL; |
| case bat_missing_fault: |
| case bat_short_fault: |
| return POWER_SUPPLY_STATUS_UNKNOWN; |
| default: |
| return POWER_SUPPLY_STATUS_NOT_CHARGING; |
| } |
| }; |
| |
| static int ltc4162l_get_status(struct ltc4162l_info *info, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, ®val); |
| if (ret) { |
| dev_err(&info->client->dev, "Failed to read CHARGER_STATE\n"); |
| return ret; |
| } |
| |
| val->intval = ltc4162l_state_decode(regval); |
| |
| return 0; |
| } |
| |
| static int ltc4162l_charge_status_decode(enum ltc4162l_charge_status value) |
| { |
| if (!value) |
| return POWER_SUPPLY_CHARGE_TYPE_NONE; |
| |
| /* constant voltage/current and input_current limit are "fast" modes */ |
| if (value <= iin_limit_active) |
| return POWER_SUPPLY_CHARGE_TYPE_FAST; |
| |
| /* Anything that's not fast we'll return as trickle */ |
| return POWER_SUPPLY_CHARGE_TYPE_TRICKLE; |
| } |
| |
| static int ltc4162l_get_charge_type(struct ltc4162l_info *info, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, ®val); |
| if (ret) |
| return ret; |
| |
| val->intval = ltc4162l_charge_status_decode(regval); |
| |
| return 0; |
| } |
| |
| static int ltc4162l_state_to_health(enum ltc4162l_state value) |
| { |
| switch (value) { |
| case ntc_pause: |
| return POWER_SUPPLY_HEALTH_OVERHEAT; |
| case timer_term: |
| return POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; |
| case max_charge_time_fault: |
| return POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE; |
| case bat_missing_fault: |
| return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| case bat_short_fault: |
| return POWER_SUPPLY_HEALTH_DEAD; |
| default: |
| return POWER_SUPPLY_HEALTH_GOOD; |
| } |
| } |
| |
| static int ltc4162l_get_health(struct ltc4162l_info *info, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, ®val); |
| if (ret) |
| return ret; |
| |
| val->intval = ltc4162l_state_to_health(regval); |
| |
| return 0; |
| } |
| |
| static int ltc4162l_get_online(struct ltc4162l_info *info, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_SYSTEM_STATUS_REG, ®val); |
| if (ret) |
| return ret; |
| |
| /* BIT(2) indicates if input voltage is sufficient to charge */ |
| val->intval = !!(regval & BIT(2)); |
| |
| return 0; |
| } |
| |
| static int ltc4162l_get_vbat(struct ltc4162l_info *info, |
| unsigned int reg, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, reg, ®val); |
| if (ret) |
| return ret; |
| |
| /* cell_count × 192.4μV/LSB */ |
| regval *= 1924; |
| regval *= ltc4162l_get_cell_count(info); |
| regval /= 10; |
| val->intval = regval; |
| |
| return 0; |
| } |
| |
| static int ltc4162l_get_ibat(struct ltc4162l_info *info, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_IBAT, ®val); |
| if (ret) |
| return ret; |
| |
| /* Signed 16-bit number, 1.466μV / RSNSB amperes/LSB. */ |
| ret = (s16)(regval & 0xFFFF); |
| val->intval = 100 * mult_frac(ret, 14660, (int)info->rsnsb); |
| |
| return 0; |
| } |
| |
| |
| static int ltc4162l_get_input_voltage(struct ltc4162l_info *info, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_VIN, ®val); |
| if (ret) |
| return ret; |
| |
| /* 1.649mV/LSB */ |
| val->intval = regval * 1694; |
| |
| return 0; |
| } |
| |
| static int ltc4162l_get_input_current(struct ltc4162l_info *info, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_IIN, ®val); |
| if (ret) |
| return ret; |
| |
| /* Signed 16-bit number, 1.466μV / RSNSI amperes/LSB. */ |
| ret = (s16)(regval & 0xFFFF); |
| ret *= 14660; |
| ret /= info->rsnsi; |
| ret *= 100; |
| |
| val->intval = ret; |
| |
| return 0; |
| } |
| |
| static int ltc4162l_get_icharge(struct ltc4162l_info *info, |
| unsigned int reg, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, reg, ®val); |
| if (ret) |
| return ret; |
| |
| regval &= BIT(6) - 1; /* Only the lower 5 bits */ |
| |
| /* The charge current servo level: (icharge_dac + 1) × 1mV/RSNSB */ |
| ++regval; |
| val->intval = 10000u * mult_frac(regval, 100000u, info->rsnsb); |
| |
| return 0; |
| } |
| |
| static int ltc4162l_set_icharge(struct ltc4162l_info *info, |
| unsigned int reg, |
| unsigned int value) |
| { |
| value = mult_frac(value, info->rsnsb, 100000u); |
| value /= 10000u; |
| |
| /* Round to lowest possible */ |
| if (value) |
| --value; |
| |
| if (value > 31) |
| return -EINVAL; |
| |
| return regmap_write(info->regmap, reg, value); |
| } |
| |
| |
| static int ltc4162l_get_vcharge(struct ltc4162l_info *info, |
| unsigned int reg, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| u32 voltage; |
| |
| ret = regmap_read(info->regmap, reg, ®val); |
| if (ret) |
| return ret; |
| |
| regval &= BIT(6) - 1; /* Only the lower 5 bits */ |
| |
| /* |
| * charge voltage setting can be computed from |
| * cell_count × (vcharge_setting × 12.5mV + 3.8125V) |
| * where vcharge_setting ranges from 0 to 31 (4.2V max). |
| */ |
| voltage = 3812500 + (regval * 12500); |
| voltage *= ltc4162l_get_cell_count(info); |
| val->intval = voltage; |
| |
| return 0; |
| } |
| |
| static int ltc4162l_set_vcharge(struct ltc4162l_info *info, |
| unsigned int reg, |
| unsigned int value) |
| { |
| u8 cell_count = ltc4162l_get_cell_count(info); |
| |
| if (!cell_count) |
| return -EBUSY; /* Not available yet, try again later */ |
| |
| value /= cell_count; |
| |
| if (value < 3812500) |
| return -EINVAL; |
| |
| value -= 3812500; |
| value /= 12500; |
| |
| if (value > 31) |
| return -EINVAL; |
| |
| return regmap_write(info->regmap, reg, value); |
| } |
| |
| static int ltc4162l_get_iin_limit_dac(struct ltc4162l_info *info, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_IIN_LIMIT_DAC, ®val); |
| if (ret) |
| return ret; |
| |
| regval &= BIT(6) - 1; /* Only 6 bits */ |
| |
| /* (iin_limit_dac + 1) × 500μV / RSNSI */ |
| ++regval; |
| regval *= 5000000u; |
| regval /= info->rsnsi; |
| val->intval = 100u * regval; |
| |
| return 0; |
| } |
| |
| static int ltc4162l_set_iin_limit(struct ltc4162l_info *info, |
| unsigned int value) |
| { |
| unsigned int regval; |
| |
| regval = mult_frac(value, info->rsnsi, 50000u); |
| regval /= 10000u; |
| if (regval) |
| --regval; |
| if (regval > 63) |
| regval = 63; |
| |
| return regmap_write(info->regmap, LTC4162L_IIN_LIMIT_TARGET, regval); |
| } |
| |
| static int ltc4162l_get_die_temp(struct ltc4162l_info *info, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_DIE_TEMPERATURE, ®val); |
| if (ret) |
| return ret; |
| |
| /* die_temp × 0.0215°C/LSB - 264.4°C */ |
| ret = (s16)(regval & 0xFFFF); |
| ret *= 215; |
| ret /= 100; /* Centidegrees scale */ |
| ret -= 26440; |
| val->intval = ret; |
| |
| return 0; |
| } |
| |
| static int ltc4162l_get_term_current(struct ltc4162l_info *info, |
| union power_supply_propval *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_CHARGER_CONFIG_BITS, ®val); |
| if (ret) |
| return ret; |
| |
| /* Check if C_OVER_X_THRESHOLD is enabled */ |
| if (!(regval & BIT(2))) { |
| val->intval = 0; |
| return 0; |
| } |
| |
| ret = regmap_read(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, ®val); |
| if (ret) |
| return ret; |
| |
| /* 1.466μV / RSNSB amperes/LSB */ |
| regval *= 14660u; |
| regval /= info->rsnsb; |
| val->intval = 100 * regval; |
| |
| return 0; |
| } |
| |
| static int ltc4162l_set_term_current(struct ltc4162l_info *info, |
| unsigned int value) |
| { |
| int ret; |
| unsigned int regval; |
| |
| if (!value) { |
| /* Disable en_c_over_x_term when set to zero */ |
| return regmap_update_bits(info->regmap, |
| LTC4162L_CHARGER_CONFIG_BITS, |
| BIT(2), 0); |
| } |
| |
| regval = mult_frac(value, info->rsnsb, 14660u); |
| regval /= 100u; |
| |
| ret = regmap_write(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, regval); |
| if (ret) |
| return ret; |
| |
| /* Set en_c_over_x_term after changing the threshold value */ |
| return regmap_update_bits(info->regmap, LTC4162L_CHARGER_CONFIG_BITS, |
| BIT(2), BIT(2)); |
| } |
| |
| /* Custom properties */ |
| static const char * const ltc4162l_charge_status_name[] = { |
| "ilim_reg_active", /* 32 */ |
| "thermal_reg_active", |
| "vin_uvcl_active", |
| "iin_limit_active", |
| "constant_current", |
| "constant_voltage", |
| "charger_off" /* 0 */ |
| }; |
| |
| static ssize_t charge_status_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct power_supply *psy = to_power_supply(dev); |
| struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| const char *result = ltc4162l_charge_status_name[ |
| ARRAY_SIZE(ltc4162l_charge_status_name) - 1]; |
| unsigned int regval; |
| unsigned int mask; |
| unsigned int index; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, ®val); |
| if (ret) |
| return ret; |
| |
| /* Only one bit is set according to datasheet, let's be safe here */ |
| for (mask = 32, index = 0; mask != 0; mask >>= 1, ++index) { |
| if (regval & mask) { |
| result = ltc4162l_charge_status_name[index]; |
| break; |
| } |
| } |
| |
| return sysfs_emit(buf, "%s\n", result); |
| } |
| static DEVICE_ATTR_RO(charge_status); |
| |
| static ssize_t vbat_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct power_supply *psy = to_power_supply(dev); |
| struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| union power_supply_propval val; |
| int ret; |
| |
| ret = ltc4162l_get_vbat(info, LTC4162L_VBAT, &val); |
| if (ret) |
| return ret; |
| |
| return sysfs_emit(buf, "%d\n", val.intval); |
| } |
| static DEVICE_ATTR_RO(vbat); |
| |
| static ssize_t vbat_avg_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct power_supply *psy = to_power_supply(dev); |
| struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| union power_supply_propval val; |
| int ret; |
| |
| ret = ltc4162l_get_vbat(info, LTC4162L_VBAT_FILT, &val); |
| if (ret) |
| return ret; |
| |
| return sysfs_emit(buf, "%d\n", val.intval); |
| } |
| static DEVICE_ATTR_RO(vbat_avg); |
| |
| static ssize_t ibat_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct power_supply *psy = to_power_supply(dev); |
| struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| union power_supply_propval val; |
| int ret; |
| |
| ret = ltc4162l_get_ibat(info, &val); |
| if (ret) |
| return ret; |
| |
| return sysfs_emit(buf, "%d\n", val.intval); |
| } |
| static DEVICE_ATTR_RO(ibat); |
| |
| static ssize_t force_telemetry_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct power_supply *psy = to_power_supply(dev); |
| struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_CONFIG_BITS_REG, ®val); |
| if (ret) |
| return ret; |
| |
| return sysfs_emit(buf, "%u\n", regval & BIT(2) ? 1 : 0); |
| } |
| |
| static ssize_t force_telemetry_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t count) |
| { |
| struct power_supply *psy = to_power_supply(dev); |
| struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| int ret; |
| unsigned int value; |
| |
| ret = kstrtouint(buf, 0, &value); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_update_bits(info->regmap, LTC4162L_CONFIG_BITS_REG, |
| BIT(2), value ? BIT(2) : 0); |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(force_telemetry); |
| |
| static ssize_t arm_ship_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct power_supply *psy = to_power_supply(dev); |
| struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(info->regmap, LTC4162L_ARM_SHIP_MODE, ®val); |
| if (ret) |
| return ret; |
| |
| return sysfs_emit(buf, "%u\n", |
| regval == LTC4162L_ARM_SHIP_MODE_MAGIC ? 1 : 0); |
| } |
| |
| static ssize_t arm_ship_mode_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t count) |
| { |
| struct power_supply *psy = to_power_supply(dev); |
| struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| int ret; |
| unsigned int value; |
| |
| ret = kstrtouint(buf, 0, &value); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_write(info->regmap, LTC4162L_ARM_SHIP_MODE, |
| value ? LTC4162L_ARM_SHIP_MODE_MAGIC : 0); |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(arm_ship_mode); |
| |
| static struct attribute *ltc4162l_sysfs_entries[] = { |
| &dev_attr_charge_status.attr, |
| &dev_attr_ibat.attr, |
| &dev_attr_vbat.attr, |
| &dev_attr_vbat_avg.attr, |
| &dev_attr_force_telemetry.attr, |
| &dev_attr_arm_ship_mode.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group ltc4162l_attr_group = { |
| .name = NULL, /* put in device directory */ |
| .attrs = ltc4162l_sysfs_entries, |
| }; |
| |
| static const struct attribute_group *ltc4162l_attr_groups[] = { |
| <c4162l_attr_group, |
| NULL, |
| }; |
| |
| static int ltc4162l_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| return ltc4162l_get_status(info, val); |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| return ltc4162l_get_charge_type(info, val); |
| case POWER_SUPPLY_PROP_HEALTH: |
| return ltc4162l_get_health(info, val); |
| case POWER_SUPPLY_PROP_ONLINE: |
| return ltc4162l_get_online(info, val); |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| return ltc4162l_get_input_voltage(info, val); |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| return ltc4162l_get_input_current(info, val); |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| return ltc4162l_get_icharge(info, |
| LTC4162L_ICHARGE_DAC, val); |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| return ltc4162l_get_icharge(info, |
| LTC4162L_CHARGE_CURRENT_SETTING, val); |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| return ltc4162l_get_vcharge(info, |
| LTC4162L_VCHARGE_DAC, val); |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| return ltc4162l_get_vcharge(info, |
| LTC4162L_VCHARGE_SETTING, val); |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| return ltc4162l_get_iin_limit_dac(info, val); |
| case POWER_SUPPLY_PROP_TEMP: |
| return ltc4162l_get_die_temp(info, val); |
| case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: |
| return ltc4162l_get_term_current(info, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int ltc4162l_set_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct ltc4162l_info *info = power_supply_get_drvdata(psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| return ltc4162l_set_icharge(info, |
| LTC4162L_CHARGE_CURRENT_SETTING, val->intval); |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| return ltc4162l_set_vcharge(info, |
| LTC4162L_VCHARGE_SETTING, val->intval); |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| return ltc4162l_set_iin_limit(info, val->intval); |
| case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: |
| return ltc4162l_set_term_current(info, val->intval); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int ltc4162l_property_is_writeable(struct power_supply *psy, |
| enum power_supply_property psp) |
| { |
| switch (psp) { |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| /* Charger power supply property routines */ |
| static enum power_supply_property ltc4162l_properties[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_CHARGE_TYPE, |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, |
| POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| POWER_SUPPLY_PROP_TEMP, |
| POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, |
| }; |
| |
| static const struct power_supply_desc ltc4162l_desc = { |
| .name = "ltc4162-l", |
| .type = POWER_SUPPLY_TYPE_MAINS, |
| .properties = ltc4162l_properties, |
| .num_properties = ARRAY_SIZE(ltc4162l_properties), |
| .get_property = ltc4162l_get_property, |
| .set_property = ltc4162l_set_property, |
| .property_is_writeable = ltc4162l_property_is_writeable, |
| }; |
| |
| static bool ltc4162l_is_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| /* all registers up to this one are writeable */ |
| if (reg <= LTC4162L_CHARGER_CONFIG_BITS) |
| return true; |
| |
| /* The ALERTS registers can be written to clear alerts */ |
| if (reg >= LTC4162L_LIMIT_ALERTS_REG && |
| reg <= LTC4162L_CHARGE_STATUS_ALERTS_REG) |
| return true; |
| |
| return false; |
| } |
| |
| static bool ltc4162l_is_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| /* all registers after this one are read-only status registers */ |
| return reg > LTC4162L_CHARGER_CONFIG_BITS; |
| } |
| |
| static const struct regmap_config ltc4162l_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 16, |
| .val_format_endian = REGMAP_ENDIAN_LITTLE, |
| .writeable_reg = ltc4162l_is_writeable_reg, |
| .volatile_reg = ltc4162l_is_volatile_reg, |
| .max_register = LTC4162L_INPUT_UNDERVOLTAGE_DAC, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static void ltc4162l_clear_interrupts(struct ltc4162l_info *info) |
| { |
| /* Acknowledge interrupt to chip by clearing all events */ |
| regmap_write(info->regmap, LTC4162L_LIMIT_ALERTS_REG, 0); |
| regmap_write(info->regmap, LTC4162L_CHARGER_STATE_ALERTS_REG, 0); |
| regmap_write(info->regmap, LTC4162L_CHARGE_STATUS_ALERTS_REG, 0); |
| } |
| |
| static int ltc4162l_probe(struct i2c_client *client) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| struct device *dev = &client->dev; |
| struct ltc4162l_info *info; |
| struct power_supply_config ltc4162l_config = {}; |
| u32 value; |
| int ret; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { |
| dev_err(dev, "No support for SMBUS_WORD_DATA\n"); |
| return -ENODEV; |
| } |
| info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| info->client = client; |
| i2c_set_clientdata(client, info); |
| |
| info->regmap = devm_regmap_init_i2c(client, <c4162l_regmap_config); |
| if (IS_ERR(info->regmap)) { |
| dev_err(dev, "Failed to initialize register map\n"); |
| return PTR_ERR(info->regmap); |
| } |
| |
| ret = device_property_read_u32(dev, "lltc,rsnsb-micro-ohms", |
| &info->rsnsb); |
| if (ret) { |
| dev_err(dev, "Missing lltc,rsnsb-micro-ohms property\n"); |
| return ret; |
| } |
| if (!info->rsnsb) |
| return -EINVAL; |
| |
| ret = device_property_read_u32(dev, "lltc,rsnsi-micro-ohms", |
| &info->rsnsi); |
| if (ret) { |
| dev_err(dev, "Missing lltc,rsnsi-micro-ohms property\n"); |
| return ret; |
| } |
| if (!info->rsnsi) |
| return -EINVAL; |
| |
| if (!device_property_read_u32(dev, "lltc,cell-count", &value)) |
| info->cell_count = value; |
| |
| ltc4162l_config.of_node = dev->of_node; |
| ltc4162l_config.drv_data = info; |
| ltc4162l_config.attr_grp = ltc4162l_attr_groups; |
| |
| info->charger = devm_power_supply_register(dev, <c4162l_desc, |
| <c4162l_config); |
| if (IS_ERR(info->charger)) { |
| dev_err(dev, "Failed to register charger\n"); |
| return PTR_ERR(info->charger); |
| } |
| |
| /* Disable the threshold alerts, we're not using them */ |
| regmap_write(info->regmap, LTC4162L_EN_LIMIT_ALERTS_REG, 0); |
| |
| /* Enable interrupts on all status changes */ |
| regmap_write(info->regmap, LTC4162L_EN_CHARGER_STATE_ALERTS_REG, |
| 0x1fff); |
| regmap_write(info->regmap, LTC4162L_EN_CHARGE_STATUS_ALERTS_REG, 0x1f); |
| |
| ltc4162l_clear_interrupts(info); |
| |
| return 0; |
| } |
| |
| static void ltc4162l_alert(struct i2c_client *client, |
| enum i2c_alert_protocol type, unsigned int flag) |
| { |
| struct ltc4162l_info *info = i2c_get_clientdata(client); |
| |
| if (type != I2C_PROTOCOL_SMBUS_ALERT) |
| return; |
| |
| ltc4162l_clear_interrupts(info); |
| power_supply_changed(info->charger); |
| } |
| |
| static const struct i2c_device_id ltc4162l_i2c_id_table[] = { |
| { "ltc4162-l", 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, ltc4162l_i2c_id_table); |
| |
| static const struct of_device_id ltc4162l_of_match[] __maybe_unused = { |
| { .compatible = "lltc,ltc4162-l", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, ltc4162l_of_match); |
| |
| static struct i2c_driver ltc4162l_driver = { |
| .probe = ltc4162l_probe, |
| .alert = ltc4162l_alert, |
| .id_table = ltc4162l_i2c_id_table, |
| .driver = { |
| .name = "ltc4162-l-charger", |
| .of_match_table = of_match_ptr(ltc4162l_of_match), |
| }, |
| }; |
| module_i2c_driver(ltc4162l_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>"); |
| MODULE_DESCRIPTION("LTC4162-L charger driver"); |