| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* NXP PCF50633 Main Battery Charger Driver |
| * |
| * (C) 2006-2008 by Openmoko, Inc. |
| * Author: Balaji Rao <balajirrao@openmoko.org> |
| * All rights reserved. |
| * |
| * Broken down from monstrous PCF50633 driver mainly by |
| * Harald Welte, Andy Green and Werner Almesberger |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/device.h> |
| #include <linux/sysfs.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| |
| #include <linux/mfd/pcf50633/core.h> |
| #include <linux/mfd/pcf50633/mbc.h> |
| |
| struct pcf50633_mbc { |
| struct pcf50633 *pcf; |
| |
| int adapter_online; |
| int usb_online; |
| |
| struct power_supply *usb; |
| struct power_supply *adapter; |
| struct power_supply *ac; |
| }; |
| |
| int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma) |
| { |
| struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev); |
| int ret = 0; |
| u8 bits; |
| u8 mbcs2, chgmod; |
| unsigned int mbcc5; |
| |
| if (ma >= 1000) { |
| bits = PCF50633_MBCC7_USB_1000mA; |
| ma = 1000; |
| } else if (ma >= 500) { |
| bits = PCF50633_MBCC7_USB_500mA; |
| ma = 500; |
| } else if (ma >= 100) { |
| bits = PCF50633_MBCC7_USB_100mA; |
| ma = 100; |
| } else { |
| bits = PCF50633_MBCC7_USB_SUSPEND; |
| ma = 0; |
| } |
| |
| ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7, |
| PCF50633_MBCC7_USB_MASK, bits); |
| if (ret) |
| dev_err(pcf->dev, "error setting usb curlim to %d mA\n", ma); |
| else |
| dev_info(pcf->dev, "usb curlim to %d mA\n", ma); |
| |
| /* |
| * We limit the charging current to be the USB current limit. |
| * The reason is that on pcf50633, when it enters PMU Standby mode, |
| * which it does when the device goes "off", the USB current limit |
| * reverts to the variant default. In at least one common case, that |
| * default is 500mA. By setting the charging current to be the same |
| * as the USB limit we set here before PMU standby, we enforce it only |
| * using the correct amount of current even when the USB current limit |
| * gets reset to the wrong thing |
| */ |
| |
| if (mbc->pcf->pdata->charger_reference_current_ma) { |
| mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma; |
| if (mbcc5 > 255) |
| mbcc5 = 255; |
| pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5); |
| } |
| |
| mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2); |
| chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK); |
| |
| /* If chgmod == BATFULL, setting chgena has no effect. |
| * Datasheet says we need to set resume instead but when autoresume is |
| * used resume doesn't work. Clear and set chgena instead. |
| */ |
| if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL) |
| pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, |
| PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA); |
| else { |
| pcf50633_reg_clear_bits(pcf, PCF50633_REG_MBCC1, |
| PCF50633_MBCC1_CHGENA); |
| pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1, |
| PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA); |
| } |
| |
| power_supply_changed(mbc->usb); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(pcf50633_mbc_usb_curlim_set); |
| |
| int pcf50633_mbc_get_status(struct pcf50633 *pcf) |
| { |
| struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev); |
| int status = 0; |
| u8 chgmod; |
| |
| if (!mbc) |
| return 0; |
| |
| chgmod = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2) |
| & PCF50633_MBCS2_MBC_MASK; |
| |
| if (mbc->usb_online) |
| status |= PCF50633_MBC_USB_ONLINE; |
| if (chgmod == PCF50633_MBCS2_MBC_USB_PRE || |
| chgmod == PCF50633_MBCS2_MBC_USB_PRE_WAIT || |
| chgmod == PCF50633_MBCS2_MBC_USB_FAST || |
| chgmod == PCF50633_MBCS2_MBC_USB_FAST_WAIT) |
| status |= PCF50633_MBC_USB_ACTIVE; |
| if (mbc->adapter_online) |
| status |= PCF50633_MBC_ADAPTER_ONLINE; |
| if (chgmod == PCF50633_MBCS2_MBC_ADP_PRE || |
| chgmod == PCF50633_MBCS2_MBC_ADP_PRE_WAIT || |
| chgmod == PCF50633_MBCS2_MBC_ADP_FAST || |
| chgmod == PCF50633_MBCS2_MBC_ADP_FAST_WAIT) |
| status |= PCF50633_MBC_ADAPTER_ACTIVE; |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status); |
| |
| int pcf50633_mbc_get_usb_online_status(struct pcf50633 *pcf) |
| { |
| struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev); |
| |
| if (!mbc) |
| return 0; |
| |
| return mbc->usb_online; |
| } |
| EXPORT_SYMBOL_GPL(pcf50633_mbc_get_usb_online_status); |
| |
| static ssize_t |
| show_chgmode(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct pcf50633_mbc *mbc = dev_get_drvdata(dev); |
| |
| u8 mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2); |
| u8 chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK); |
| |
| return sysfs_emit(buf, "%d\n", chgmod); |
| } |
| static DEVICE_ATTR(chgmode, S_IRUGO, show_chgmode, NULL); |
| |
| static ssize_t |
| show_usblim(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct pcf50633_mbc *mbc = dev_get_drvdata(dev); |
| u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) & |
| PCF50633_MBCC7_USB_MASK; |
| unsigned int ma; |
| |
| if (usblim == PCF50633_MBCC7_USB_1000mA) |
| ma = 1000; |
| else if (usblim == PCF50633_MBCC7_USB_500mA) |
| ma = 500; |
| else if (usblim == PCF50633_MBCC7_USB_100mA) |
| ma = 100; |
| else |
| ma = 0; |
| |
| return sysfs_emit(buf, "%u\n", ma); |
| } |
| |
| static ssize_t set_usblim(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct pcf50633_mbc *mbc = dev_get_drvdata(dev); |
| unsigned long ma; |
| int ret; |
| |
| ret = kstrtoul(buf, 10, &ma); |
| if (ret) |
| return ret; |
| |
| pcf50633_mbc_usb_curlim_set(mbc->pcf, ma); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim); |
| |
| static ssize_t |
| show_chglim(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct pcf50633_mbc *mbc = dev_get_drvdata(dev); |
| u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5); |
| unsigned int ma; |
| |
| if (!mbc->pcf->pdata->charger_reference_current_ma) |
| return -ENODEV; |
| |
| ma = (mbc->pcf->pdata->charger_reference_current_ma * mbcc5) >> 8; |
| |
| return sysfs_emit(buf, "%u\n", ma); |
| } |
| |
| static ssize_t set_chglim(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct pcf50633_mbc *mbc = dev_get_drvdata(dev); |
| unsigned long ma; |
| unsigned int mbcc5; |
| int ret; |
| |
| if (!mbc->pcf->pdata->charger_reference_current_ma) |
| return -ENODEV; |
| |
| ret = kstrtoul(buf, 10, &ma); |
| if (ret) |
| return ret; |
| |
| mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma; |
| if (mbcc5 > 255) |
| mbcc5 = 255; |
| pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5); |
| |
| return count; |
| } |
| |
| /* |
| * This attribute allows to change MBC charging limit on the fly |
| * independently of usb current limit. It also gets set automatically every |
| * time usb current limit is changed. |
| */ |
| static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim); |
| |
| static struct attribute *pcf50633_mbc_sysfs_attrs[] = { |
| &dev_attr_chgmode.attr, |
| &dev_attr_usb_curlim.attr, |
| &dev_attr_chg_curlim.attr, |
| NULL, |
| }; |
| |
| ATTRIBUTE_GROUPS(pcf50633_mbc_sysfs); |
| |
| static void |
| pcf50633_mbc_irq_handler(int irq, void *data) |
| { |
| struct pcf50633_mbc *mbc = data; |
| |
| /* USB */ |
| if (irq == PCF50633_IRQ_USBINS) { |
| mbc->usb_online = 1; |
| } else if (irq == PCF50633_IRQ_USBREM) { |
| mbc->usb_online = 0; |
| pcf50633_mbc_usb_curlim_set(mbc->pcf, 0); |
| } |
| |
| /* Adapter */ |
| if (irq == PCF50633_IRQ_ADPINS) |
| mbc->adapter_online = 1; |
| else if (irq == PCF50633_IRQ_ADPREM) |
| mbc->adapter_online = 0; |
| |
| power_supply_changed(mbc->ac); |
| power_supply_changed(mbc->usb); |
| power_supply_changed(mbc->adapter); |
| |
| if (mbc->pcf->pdata->mbc_event_callback) |
| mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq); |
| } |
| |
| static int adapter_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy); |
| int ret = 0; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = mbc->adapter_online; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static int usb_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy); |
| int ret = 0; |
| u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) & |
| PCF50633_MBCC7_USB_MASK; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = mbc->usb_online && |
| (usblim <= PCF50633_MBCC7_USB_500mA); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static int ac_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy); |
| int ret = 0; |
| u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) & |
| PCF50633_MBCC7_USB_MASK; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = mbc->usb_online && |
| (usblim == PCF50633_MBCC7_USB_1000mA); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static enum power_supply_property power_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| }; |
| |
| static const u8 mbc_irq_handlers[] = { |
| PCF50633_IRQ_ADPINS, |
| PCF50633_IRQ_ADPREM, |
| PCF50633_IRQ_USBINS, |
| PCF50633_IRQ_USBREM, |
| PCF50633_IRQ_BATFULL, |
| PCF50633_IRQ_CHGHALT, |
| PCF50633_IRQ_THLIMON, |
| PCF50633_IRQ_THLIMOFF, |
| PCF50633_IRQ_USBLIMON, |
| PCF50633_IRQ_USBLIMOFF, |
| PCF50633_IRQ_LOWSYS, |
| PCF50633_IRQ_LOWBAT, |
| }; |
| |
| static const struct power_supply_desc pcf50633_mbc_adapter_desc = { |
| .name = "adapter", |
| .type = POWER_SUPPLY_TYPE_MAINS, |
| .properties = power_props, |
| .num_properties = ARRAY_SIZE(power_props), |
| .get_property = &adapter_get_property, |
| }; |
| |
| static const struct power_supply_desc pcf50633_mbc_usb_desc = { |
| .name = "usb", |
| .type = POWER_SUPPLY_TYPE_USB, |
| .properties = power_props, |
| .num_properties = ARRAY_SIZE(power_props), |
| .get_property = usb_get_property, |
| }; |
| |
| static const struct power_supply_desc pcf50633_mbc_ac_desc = { |
| .name = "ac", |
| .type = POWER_SUPPLY_TYPE_MAINS, |
| .properties = power_props, |
| .num_properties = ARRAY_SIZE(power_props), |
| .get_property = ac_get_property, |
| }; |
| |
| static int pcf50633_mbc_probe(struct platform_device *pdev) |
| { |
| struct power_supply_config psy_cfg = {}; |
| struct power_supply_config usb_psy_cfg; |
| struct pcf50633_mbc *mbc; |
| int i; |
| u8 mbcs1; |
| |
| mbc = devm_kzalloc(&pdev->dev, sizeof(*mbc), GFP_KERNEL); |
| if (!mbc) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, mbc); |
| mbc->pcf = dev_to_pcf50633(pdev->dev.parent); |
| |
| /* Set up IRQ handlers */ |
| for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++) |
| pcf50633_register_irq(mbc->pcf, mbc_irq_handlers[i], |
| pcf50633_mbc_irq_handler, mbc); |
| |
| psy_cfg.supplied_to = mbc->pcf->pdata->batteries; |
| psy_cfg.num_supplicants = mbc->pcf->pdata->num_batteries; |
| psy_cfg.drv_data = mbc; |
| |
| /* Create power supplies */ |
| mbc->adapter = power_supply_register(&pdev->dev, |
| &pcf50633_mbc_adapter_desc, |
| &psy_cfg); |
| if (IS_ERR(mbc->adapter)) { |
| dev_err(mbc->pcf->dev, "failed to register adapter\n"); |
| return PTR_ERR(mbc->adapter); |
| } |
| |
| usb_psy_cfg = psy_cfg; |
| usb_psy_cfg.attr_grp = pcf50633_mbc_sysfs_groups; |
| |
| mbc->usb = power_supply_register(&pdev->dev, &pcf50633_mbc_usb_desc, |
| &usb_psy_cfg); |
| if (IS_ERR(mbc->usb)) { |
| dev_err(mbc->pcf->dev, "failed to register usb\n"); |
| power_supply_unregister(mbc->adapter); |
| return PTR_ERR(mbc->usb); |
| } |
| |
| mbc->ac = power_supply_register(&pdev->dev, &pcf50633_mbc_ac_desc, |
| &psy_cfg); |
| if (IS_ERR(mbc->ac)) { |
| dev_err(mbc->pcf->dev, "failed to register ac\n"); |
| power_supply_unregister(mbc->adapter); |
| power_supply_unregister(mbc->usb); |
| return PTR_ERR(mbc->ac); |
| } |
| |
| mbcs1 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS1); |
| if (mbcs1 & PCF50633_MBCS1_USBPRES) |
| pcf50633_mbc_irq_handler(PCF50633_IRQ_USBINS, mbc); |
| if (mbcs1 & PCF50633_MBCS1_ADAPTPRES) |
| pcf50633_mbc_irq_handler(PCF50633_IRQ_ADPINS, mbc); |
| |
| return 0; |
| } |
| |
| static void pcf50633_mbc_remove(struct platform_device *pdev) |
| { |
| struct pcf50633_mbc *mbc = platform_get_drvdata(pdev); |
| int i; |
| |
| /* Remove IRQ handlers */ |
| for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++) |
| pcf50633_free_irq(mbc->pcf, mbc_irq_handlers[i]); |
| |
| power_supply_unregister(mbc->usb); |
| power_supply_unregister(mbc->adapter); |
| power_supply_unregister(mbc->ac); |
| } |
| |
| static struct platform_driver pcf50633_mbc_driver = { |
| .driver = { |
| .name = "pcf50633-mbc", |
| }, |
| .probe = pcf50633_mbc_probe, |
| .remove_new = pcf50633_mbc_remove, |
| }; |
| |
| module_platform_driver(pcf50633_mbc_driver); |
| |
| MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>"); |
| MODULE_DESCRIPTION("PCF50633 mbc driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pcf50633-mbc"); |