| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2022, Linaro Ltd |
| */ |
| #include <linux/auxiliary_bus.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/soc/qcom/pdr.h> |
| #include <linux/soc/qcom/pmic_glink.h> |
| #include <linux/math.h> |
| #include <linux/units.h> |
| |
| #define BATTMGR_CHEMISTRY_LEN 4 |
| #define BATTMGR_STRING_LEN 128 |
| |
| enum qcom_battmgr_variant { |
| QCOM_BATTMGR_SM8350, |
| QCOM_BATTMGR_SC8280XP, |
| }; |
| |
| #define BATTMGR_BAT_STATUS 0x1 |
| |
| #define BATTMGR_REQUEST_NOTIFICATION 0x4 |
| |
| #define BATTMGR_NOTIFICATION 0x7 |
| #define NOTIF_BAT_PROPERTY 0x30 |
| #define NOTIF_USB_PROPERTY 0x32 |
| #define NOTIF_WLS_PROPERTY 0x34 |
| #define NOTIF_BAT_INFO 0x81 |
| #define NOTIF_BAT_STATUS 0x80 |
| |
| #define BATTMGR_BAT_INFO 0x9 |
| |
| #define BATTMGR_BAT_DISCHARGE_TIME 0xc |
| |
| #define BATTMGR_BAT_CHARGE_TIME 0xd |
| |
| #define BATTMGR_BAT_PROPERTY_GET 0x30 |
| #define BATTMGR_BAT_PROPERTY_SET 0x31 |
| #define BATT_STATUS 0 |
| #define BATT_HEALTH 1 |
| #define BATT_PRESENT 2 |
| #define BATT_CHG_TYPE 3 |
| #define BATT_CAPACITY 4 |
| #define BATT_SOH 5 |
| #define BATT_VOLT_OCV 6 |
| #define BATT_VOLT_NOW 7 |
| #define BATT_VOLT_MAX 8 |
| #define BATT_CURR_NOW 9 |
| #define BATT_CHG_CTRL_LIM 10 |
| #define BATT_CHG_CTRL_LIM_MAX 11 |
| #define BATT_TEMP 12 |
| #define BATT_TECHNOLOGY 13 |
| #define BATT_CHG_COUNTER 14 |
| #define BATT_CYCLE_COUNT 15 |
| #define BATT_CHG_FULL_DESIGN 16 |
| #define BATT_CHG_FULL 17 |
| #define BATT_MODEL_NAME 18 |
| #define BATT_TTF_AVG 19 |
| #define BATT_TTE_AVG 20 |
| #define BATT_RESISTANCE 21 |
| #define BATT_POWER_NOW 22 |
| #define BATT_POWER_AVG 23 |
| |
| #define BATTMGR_USB_PROPERTY_GET 0x32 |
| #define BATTMGR_USB_PROPERTY_SET 0x33 |
| #define USB_ONLINE 0 |
| #define USB_VOLT_NOW 1 |
| #define USB_VOLT_MAX 2 |
| #define USB_CURR_NOW 3 |
| #define USB_CURR_MAX 4 |
| #define USB_INPUT_CURR_LIMIT 5 |
| #define USB_TYPE 6 |
| #define USB_ADAP_TYPE 7 |
| #define USB_MOISTURE_DET_EN 8 |
| #define USB_MOISTURE_DET_STS 9 |
| |
| #define BATTMGR_WLS_PROPERTY_GET 0x34 |
| #define BATTMGR_WLS_PROPERTY_SET 0x35 |
| #define WLS_ONLINE 0 |
| #define WLS_VOLT_NOW 1 |
| #define WLS_VOLT_MAX 2 |
| #define WLS_CURR_NOW 3 |
| #define WLS_CURR_MAX 4 |
| #define WLS_TYPE 5 |
| #define WLS_BOOST_EN 6 |
| |
| struct qcom_battmgr_enable_request { |
| struct pmic_glink_hdr hdr; |
| __le32 battery_id; |
| __le32 power_state; |
| __le32 low_capacity; |
| __le32 high_capacity; |
| }; |
| |
| struct qcom_battmgr_property_request { |
| struct pmic_glink_hdr hdr; |
| __le32 battery; |
| __le32 property; |
| __le32 value; |
| }; |
| |
| struct qcom_battmgr_update_request { |
| struct pmic_glink_hdr hdr; |
| __le32 battery_id; |
| }; |
| |
| struct qcom_battmgr_charge_time_request { |
| struct pmic_glink_hdr hdr; |
| __le32 battery_id; |
| __le32 percent; |
| __le32 reserved; |
| }; |
| |
| struct qcom_battmgr_discharge_time_request { |
| struct pmic_glink_hdr hdr; |
| __le32 battery_id; |
| __le32 rate; /* 0 for current rate */ |
| __le32 reserved; |
| }; |
| |
| struct qcom_battmgr_message { |
| struct pmic_glink_hdr hdr; |
| union { |
| struct { |
| __le32 property; |
| __le32 value; |
| __le32 result; |
| } intval; |
| struct { |
| __le32 property; |
| char model[BATTMGR_STRING_LEN]; |
| } strval; |
| struct { |
| /* |
| * 0: mWh |
| * 1: mAh |
| */ |
| __le32 power_unit; |
| __le32 design_capacity; |
| __le32 last_full_capacity; |
| /* |
| * 0 nonrechargable |
| * 1 rechargable |
| */ |
| __le32 battery_tech; |
| __le32 design_voltage; /* mV */ |
| __le32 capacity_low; |
| __le32 capacity_warning; |
| __le32 cycle_count; |
| /* thousandth of persent */ |
| __le32 accuracy; |
| __le32 max_sample_time_ms; |
| __le32 min_sample_time_ms; |
| __le32 max_average_interval_ms; |
| __le32 min_average_interval_ms; |
| /* granularity between low and warning */ |
| __le32 capacity_granularity1; |
| /* granularity between warning and full */ |
| __le32 capacity_granularity2; |
| /* |
| * 0: no |
| * 1: cold |
| * 2: hot |
| */ |
| __le32 swappable; |
| __le32 capabilities; |
| char model_number[BATTMGR_STRING_LEN]; |
| char serial_number[BATTMGR_STRING_LEN]; |
| char battery_type[BATTMGR_STRING_LEN]; |
| char oem_info[BATTMGR_STRING_LEN]; |
| char battery_chemistry[BATTMGR_CHEMISTRY_LEN]; |
| char uid[BATTMGR_STRING_LEN]; |
| __le32 critical_bias; |
| u8 day; |
| u8 month; |
| __le16 year; |
| __le32 battery_id; |
| } info; |
| struct { |
| /* |
| * BIT(0) discharging |
| * BIT(1) charging |
| * BIT(2) critical low |
| */ |
| __le32 battery_state; |
| /* mWh or mAh, based on info->power_unit */ |
| __le32 capacity; |
| __le32 rate; |
| /* mv */ |
| __le32 battery_voltage; |
| /* |
| * BIT(0) power online |
| * BIT(1) discharging |
| * BIT(2) charging |
| * BIT(3) battery critical |
| */ |
| __le32 power_state; |
| /* |
| * 1: AC |
| * 2: USB |
| * 3: Wireless |
| */ |
| __le32 charging_source; |
| __le32 temperature; |
| } status; |
| __le32 time; |
| __le32 notification; |
| }; |
| }; |
| |
| #define BATTMGR_CHARGING_SOURCE_AC 1 |
| #define BATTMGR_CHARGING_SOURCE_USB 2 |
| #define BATTMGR_CHARGING_SOURCE_WIRELESS 3 |
| |
| enum qcom_battmgr_unit { |
| QCOM_BATTMGR_UNIT_mWh = 0, |
| QCOM_BATTMGR_UNIT_mAh = 1 |
| }; |
| |
| struct qcom_battmgr_info { |
| bool valid; |
| |
| bool present; |
| unsigned int charge_type; |
| unsigned int design_capacity; |
| unsigned int last_full_capacity; |
| unsigned int voltage_max_design; |
| unsigned int voltage_max; |
| unsigned int capacity_low; |
| unsigned int capacity_warning; |
| unsigned int cycle_count; |
| unsigned int charge_count; |
| char model_number[BATTMGR_STRING_LEN]; |
| char serial_number[BATTMGR_STRING_LEN]; |
| char oem_info[BATTMGR_STRING_LEN]; |
| unsigned char technology; |
| unsigned char day; |
| unsigned char month; |
| unsigned short year; |
| }; |
| |
| struct qcom_battmgr_status { |
| unsigned int status; |
| unsigned int health; |
| unsigned int capacity; |
| unsigned int percent; |
| int current_now; |
| int power_now; |
| unsigned int voltage_now; |
| unsigned int voltage_ocv; |
| unsigned int temperature; |
| |
| unsigned int discharge_time; |
| unsigned int charge_time; |
| }; |
| |
| struct qcom_battmgr_ac { |
| bool online; |
| }; |
| |
| struct qcom_battmgr_usb { |
| bool online; |
| unsigned int voltage_now; |
| unsigned int voltage_max; |
| unsigned int current_now; |
| unsigned int current_max; |
| unsigned int current_limit; |
| unsigned int usb_type; |
| }; |
| |
| struct qcom_battmgr_wireless { |
| bool online; |
| unsigned int voltage_now; |
| unsigned int voltage_max; |
| unsigned int current_now; |
| unsigned int current_max; |
| }; |
| |
| struct qcom_battmgr { |
| struct device *dev; |
| struct pmic_glink_client *client; |
| |
| enum qcom_battmgr_variant variant; |
| |
| struct power_supply *ac_psy; |
| struct power_supply *bat_psy; |
| struct power_supply *usb_psy; |
| struct power_supply *wls_psy; |
| |
| enum qcom_battmgr_unit unit; |
| |
| int error; |
| struct completion ack; |
| |
| bool service_up; |
| |
| struct qcom_battmgr_info info; |
| struct qcom_battmgr_status status; |
| struct qcom_battmgr_ac ac; |
| struct qcom_battmgr_usb usb; |
| struct qcom_battmgr_wireless wireless; |
| |
| struct work_struct enable_work; |
| |
| /* |
| * @lock is used to prevent concurrent power supply requests to the |
| * firmware, as it then stops responding. |
| */ |
| struct mutex lock; |
| }; |
| |
| static int qcom_battmgr_request(struct qcom_battmgr *battmgr, void *data, size_t len) |
| { |
| unsigned long left; |
| int ret; |
| |
| reinit_completion(&battmgr->ack); |
| |
| battmgr->error = 0; |
| |
| ret = pmic_glink_send(battmgr->client, data, len); |
| if (ret < 0) |
| return ret; |
| |
| left = wait_for_completion_timeout(&battmgr->ack, HZ); |
| if (!left) |
| return -ETIMEDOUT; |
| |
| return battmgr->error; |
| } |
| |
| static int qcom_battmgr_request_property(struct qcom_battmgr *battmgr, int opcode, |
| int property, u32 value) |
| { |
| struct qcom_battmgr_property_request request = { |
| .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR), |
| .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP), |
| .hdr.opcode = cpu_to_le32(opcode), |
| .battery = cpu_to_le32(0), |
| .property = cpu_to_le32(property), |
| .value = cpu_to_le32(value), |
| }; |
| |
| return qcom_battmgr_request(battmgr, &request, sizeof(request)); |
| } |
| |
| static int qcom_battmgr_update_status(struct qcom_battmgr *battmgr) |
| { |
| struct qcom_battmgr_update_request request = { |
| .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR), |
| .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP), |
| .hdr.opcode = cpu_to_le32(BATTMGR_BAT_STATUS), |
| .battery_id = cpu_to_le32(0), |
| }; |
| |
| return qcom_battmgr_request(battmgr, &request, sizeof(request)); |
| } |
| |
| static int qcom_battmgr_update_info(struct qcom_battmgr *battmgr) |
| { |
| struct qcom_battmgr_update_request request = { |
| .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR), |
| .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP), |
| .hdr.opcode = cpu_to_le32(BATTMGR_BAT_INFO), |
| .battery_id = cpu_to_le32(0), |
| }; |
| |
| return qcom_battmgr_request(battmgr, &request, sizeof(request)); |
| } |
| |
| static int qcom_battmgr_update_charge_time(struct qcom_battmgr *battmgr) |
| { |
| struct qcom_battmgr_charge_time_request request = { |
| .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR), |
| .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP), |
| .hdr.opcode = cpu_to_le32(BATTMGR_BAT_CHARGE_TIME), |
| .battery_id = cpu_to_le32(0), |
| .percent = cpu_to_le32(100), |
| }; |
| |
| return qcom_battmgr_request(battmgr, &request, sizeof(request)); |
| } |
| |
| static int qcom_battmgr_update_discharge_time(struct qcom_battmgr *battmgr) |
| { |
| struct qcom_battmgr_discharge_time_request request = { |
| .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR), |
| .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP), |
| .hdr.opcode = cpu_to_le32(BATTMGR_BAT_DISCHARGE_TIME), |
| .battery_id = cpu_to_le32(0), |
| .rate = cpu_to_le32(0), |
| }; |
| |
| return qcom_battmgr_request(battmgr, &request, sizeof(request)); |
| } |
| |
| static const u8 sm8350_bat_prop_map[] = { |
| [POWER_SUPPLY_PROP_STATUS] = BATT_STATUS, |
| [POWER_SUPPLY_PROP_HEALTH] = BATT_HEALTH, |
| [POWER_SUPPLY_PROP_PRESENT] = BATT_PRESENT, |
| [POWER_SUPPLY_PROP_CHARGE_TYPE] = BATT_CHG_TYPE, |
| [POWER_SUPPLY_PROP_CAPACITY] = BATT_CAPACITY, |
| [POWER_SUPPLY_PROP_VOLTAGE_OCV] = BATT_VOLT_OCV, |
| [POWER_SUPPLY_PROP_VOLTAGE_NOW] = BATT_VOLT_NOW, |
| [POWER_SUPPLY_PROP_VOLTAGE_MAX] = BATT_VOLT_MAX, |
| [POWER_SUPPLY_PROP_CURRENT_NOW] = BATT_CURR_NOW, |
| [POWER_SUPPLY_PROP_TEMP] = BATT_TEMP, |
| [POWER_SUPPLY_PROP_TECHNOLOGY] = BATT_TECHNOLOGY, |
| [POWER_SUPPLY_PROP_CHARGE_COUNTER] = BATT_CHG_COUNTER, |
| [POWER_SUPPLY_PROP_CYCLE_COUNT] = BATT_CYCLE_COUNT, |
| [POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN] = BATT_CHG_FULL_DESIGN, |
| [POWER_SUPPLY_PROP_CHARGE_FULL] = BATT_CHG_FULL, |
| [POWER_SUPPLY_PROP_MODEL_NAME] = BATT_MODEL_NAME, |
| [POWER_SUPPLY_PROP_TIME_TO_FULL_AVG] = BATT_TTF_AVG, |
| [POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG] = BATT_TTE_AVG, |
| [POWER_SUPPLY_PROP_POWER_NOW] = BATT_POWER_NOW, |
| }; |
| |
| static int qcom_battmgr_bat_sm8350_update(struct qcom_battmgr *battmgr, |
| enum power_supply_property psp) |
| { |
| unsigned int prop; |
| int ret; |
| |
| if (psp >= ARRAY_SIZE(sm8350_bat_prop_map)) |
| return -EINVAL; |
| |
| prop = sm8350_bat_prop_map[psp]; |
| |
| mutex_lock(&battmgr->lock); |
| ret = qcom_battmgr_request_property(battmgr, BATTMGR_BAT_PROPERTY_GET, prop, 0); |
| mutex_unlock(&battmgr->lock); |
| |
| return ret; |
| } |
| |
| static int qcom_battmgr_bat_sc8280xp_update(struct qcom_battmgr *battmgr, |
| enum power_supply_property psp) |
| { |
| int ret; |
| |
| mutex_lock(&battmgr->lock); |
| |
| if (!battmgr->info.valid) { |
| ret = qcom_battmgr_update_info(battmgr); |
| if (ret < 0) |
| goto out_unlock; |
| battmgr->info.valid = true; |
| } |
| |
| ret = qcom_battmgr_update_status(battmgr); |
| if (ret < 0) |
| goto out_unlock; |
| |
| if (psp == POWER_SUPPLY_PROP_TIME_TO_FULL_AVG) { |
| ret = qcom_battmgr_update_charge_time(battmgr); |
| if (ret < 0) { |
| ret = -ENODATA; |
| goto out_unlock; |
| } |
| } |
| |
| if (psp == POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG) { |
| ret = qcom_battmgr_update_discharge_time(battmgr); |
| if (ret < 0) { |
| ret = -ENODATA; |
| goto out_unlock; |
| } |
| } |
| |
| out_unlock: |
| mutex_unlock(&battmgr->lock); |
| return ret; |
| } |
| |
| static int qcom_battmgr_bat_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy); |
| enum qcom_battmgr_unit unit = battmgr->unit; |
| int ret; |
| |
| if (!battmgr->service_up) |
| return -ENODEV; |
| |
| if (battmgr->variant == QCOM_BATTMGR_SC8280XP) |
| ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp); |
| else |
| ret = qcom_battmgr_bat_sm8350_update(battmgr, psp); |
| if (ret < 0) |
| return ret; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = battmgr->status.status; |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| val->intval = battmgr->info.charge_type; |
| break; |
| case POWER_SUPPLY_PROP_HEALTH: |
| val->intval = battmgr->status.health; |
| break; |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = battmgr->info.present; |
| break; |
| case POWER_SUPPLY_PROP_TECHNOLOGY: |
| val->intval = battmgr->info.technology; |
| break; |
| case POWER_SUPPLY_PROP_CYCLE_COUNT: |
| val->intval = battmgr->info.cycle_count; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: |
| val->intval = battmgr->info.voltage_max_design; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: |
| val->intval = battmgr->info.voltage_max; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = battmgr->status.voltage_now; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_OCV: |
| val->intval = battmgr->status.voltage_ocv; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| val->intval = battmgr->status.current_now; |
| break; |
| case POWER_SUPPLY_PROP_POWER_NOW: |
| val->intval = battmgr->status.power_now; |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| if (unit != QCOM_BATTMGR_UNIT_mAh) |
| return -ENODATA; |
| val->intval = battmgr->info.design_capacity; |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_FULL: |
| if (unit != QCOM_BATTMGR_UNIT_mAh) |
| return -ENODATA; |
| val->intval = battmgr->info.last_full_capacity; |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_EMPTY: |
| if (unit != QCOM_BATTMGR_UNIT_mAh) |
| return -ENODATA; |
| val->intval = battmgr->info.capacity_low; |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_NOW: |
| if (unit != QCOM_BATTMGR_UNIT_mAh) |
| return -ENODATA; |
| val->intval = battmgr->status.capacity; |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_COUNTER: |
| val->intval = battmgr->info.charge_count; |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: |
| if (unit != QCOM_BATTMGR_UNIT_mWh) |
| return -ENODATA; |
| val->intval = battmgr->info.design_capacity; |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_FULL: |
| if (unit != QCOM_BATTMGR_UNIT_mWh) |
| return -ENODATA; |
| val->intval = battmgr->info.last_full_capacity; |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_EMPTY: |
| if (unit != QCOM_BATTMGR_UNIT_mWh) |
| return -ENODATA; |
| val->intval = battmgr->info.capacity_low; |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| if (unit != QCOM_BATTMGR_UNIT_mWh) |
| return -ENODATA; |
| val->intval = battmgr->status.capacity; |
| break; |
| case POWER_SUPPLY_PROP_CAPACITY: |
| val->intval = battmgr->status.percent; |
| break; |
| case POWER_SUPPLY_PROP_TEMP: |
| val->intval = battmgr->status.temperature; |
| break; |
| case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: |
| val->intval = battmgr->status.discharge_time; |
| break; |
| case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: |
| val->intval = battmgr->status.charge_time; |
| break; |
| case POWER_SUPPLY_PROP_MANUFACTURE_YEAR: |
| val->intval = battmgr->info.year; |
| break; |
| case POWER_SUPPLY_PROP_MANUFACTURE_MONTH: |
| val->intval = battmgr->info.month; |
| break; |
| case POWER_SUPPLY_PROP_MANUFACTURE_DAY: |
| val->intval = battmgr->info.day; |
| break; |
| case POWER_SUPPLY_PROP_MODEL_NAME: |
| val->strval = battmgr->info.model_number; |
| break; |
| case POWER_SUPPLY_PROP_MANUFACTURER: |
| val->strval = battmgr->info.oem_info; |
| break; |
| case POWER_SUPPLY_PROP_SERIAL_NUMBER: |
| val->strval = battmgr->info.serial_number; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const enum power_supply_property sc8280xp_bat_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_TECHNOLOGY, |
| POWER_SUPPLY_PROP_CYCLE_COUNT, |
| POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_POWER_NOW, |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, |
| POWER_SUPPLY_PROP_CHARGE_FULL, |
| POWER_SUPPLY_PROP_CHARGE_EMPTY, |
| POWER_SUPPLY_PROP_CHARGE_NOW, |
| POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, |
| POWER_SUPPLY_PROP_ENERGY_FULL, |
| POWER_SUPPLY_PROP_ENERGY_EMPTY, |
| POWER_SUPPLY_PROP_ENERGY_NOW, |
| POWER_SUPPLY_PROP_TEMP, |
| POWER_SUPPLY_PROP_MANUFACTURE_YEAR, |
| POWER_SUPPLY_PROP_MANUFACTURE_MONTH, |
| POWER_SUPPLY_PROP_MANUFACTURE_DAY, |
| POWER_SUPPLY_PROP_MODEL_NAME, |
| POWER_SUPPLY_PROP_MANUFACTURER, |
| POWER_SUPPLY_PROP_SERIAL_NUMBER, |
| }; |
| |
| static const struct power_supply_desc sc8280xp_bat_psy_desc = { |
| .name = "qcom-battmgr-bat", |
| .type = POWER_SUPPLY_TYPE_BATTERY, |
| .properties = sc8280xp_bat_props, |
| .num_properties = ARRAY_SIZE(sc8280xp_bat_props), |
| .get_property = qcom_battmgr_bat_get_property, |
| }; |
| |
| static const enum power_supply_property sm8350_bat_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_CHARGE_TYPE, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_VOLTAGE_OCV, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_VOLTAGE_MAX, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_TEMP, |
| POWER_SUPPLY_PROP_TECHNOLOGY, |
| POWER_SUPPLY_PROP_CHARGE_COUNTER, |
| POWER_SUPPLY_PROP_CYCLE_COUNT, |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, |
| POWER_SUPPLY_PROP_CHARGE_FULL, |
| POWER_SUPPLY_PROP_MODEL_NAME, |
| POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, |
| POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, |
| POWER_SUPPLY_PROP_POWER_NOW, |
| }; |
| |
| static const struct power_supply_desc sm8350_bat_psy_desc = { |
| .name = "qcom-battmgr-bat", |
| .type = POWER_SUPPLY_TYPE_BATTERY, |
| .properties = sm8350_bat_props, |
| .num_properties = ARRAY_SIZE(sm8350_bat_props), |
| .get_property = qcom_battmgr_bat_get_property, |
| }; |
| |
| static int qcom_battmgr_ac_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy); |
| int ret; |
| |
| if (!battmgr->service_up) |
| return -ENODEV; |
| |
| ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp); |
| if (ret) |
| return ret; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = battmgr->ac.online; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const enum power_supply_property sc8280xp_ac_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| }; |
| |
| static const struct power_supply_desc sc8280xp_ac_psy_desc = { |
| .name = "qcom-battmgr-ac", |
| .type = POWER_SUPPLY_TYPE_MAINS, |
| .properties = sc8280xp_ac_props, |
| .num_properties = ARRAY_SIZE(sc8280xp_ac_props), |
| .get_property = qcom_battmgr_ac_get_property, |
| }; |
| |
| static const u8 sm8350_usb_prop_map[] = { |
| [POWER_SUPPLY_PROP_ONLINE] = USB_ONLINE, |
| [POWER_SUPPLY_PROP_VOLTAGE_NOW] = USB_VOLT_NOW, |
| [POWER_SUPPLY_PROP_VOLTAGE_MAX] = USB_VOLT_MAX, |
| [POWER_SUPPLY_PROP_CURRENT_NOW] = USB_CURR_NOW, |
| [POWER_SUPPLY_PROP_CURRENT_MAX] = USB_CURR_MAX, |
| [POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT] = USB_INPUT_CURR_LIMIT, |
| [POWER_SUPPLY_PROP_USB_TYPE] = USB_TYPE, |
| }; |
| |
| static int qcom_battmgr_usb_sm8350_update(struct qcom_battmgr *battmgr, |
| enum power_supply_property psp) |
| { |
| unsigned int prop; |
| int ret; |
| |
| if (psp >= ARRAY_SIZE(sm8350_usb_prop_map)) |
| return -EINVAL; |
| |
| prop = sm8350_usb_prop_map[psp]; |
| |
| mutex_lock(&battmgr->lock); |
| ret = qcom_battmgr_request_property(battmgr, BATTMGR_USB_PROPERTY_GET, prop, 0); |
| mutex_unlock(&battmgr->lock); |
| |
| return ret; |
| } |
| |
| static int qcom_battmgr_usb_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy); |
| int ret; |
| |
| if (!battmgr->service_up) |
| return -ENODEV; |
| |
| if (battmgr->variant == QCOM_BATTMGR_SC8280XP) |
| ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp); |
| else |
| ret = qcom_battmgr_usb_sm8350_update(battmgr, psp); |
| if (ret) |
| return ret; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = battmgr->usb.online; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = battmgr->usb.voltage_now; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: |
| val->intval = battmgr->usb.voltage_max; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| val->intval = battmgr->usb.current_now; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| val->intval = battmgr->usb.current_max; |
| break; |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| val->intval = battmgr->usb.current_limit; |
| break; |
| case POWER_SUPPLY_PROP_USB_TYPE: |
| val->intval = battmgr->usb.usb_type; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const enum power_supply_usb_type usb_psy_supported_types[] = { |
| POWER_SUPPLY_USB_TYPE_UNKNOWN, |
| POWER_SUPPLY_USB_TYPE_SDP, |
| POWER_SUPPLY_USB_TYPE_DCP, |
| POWER_SUPPLY_USB_TYPE_CDP, |
| POWER_SUPPLY_USB_TYPE_ACA, |
| POWER_SUPPLY_USB_TYPE_C, |
| POWER_SUPPLY_USB_TYPE_PD, |
| POWER_SUPPLY_USB_TYPE_PD_DRP, |
| POWER_SUPPLY_USB_TYPE_PD_PPS, |
| POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID, |
| }; |
| |
| static const enum power_supply_property sc8280xp_usb_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| }; |
| |
| static const struct power_supply_desc sc8280xp_usb_psy_desc = { |
| .name = "qcom-battmgr-usb", |
| .type = POWER_SUPPLY_TYPE_USB, |
| .properties = sc8280xp_usb_props, |
| .num_properties = ARRAY_SIZE(sc8280xp_usb_props), |
| .get_property = qcom_battmgr_usb_get_property, |
| .usb_types = usb_psy_supported_types, |
| .num_usb_types = ARRAY_SIZE(usb_psy_supported_types), |
| }; |
| |
| static const enum power_supply_property sm8350_usb_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_VOLTAGE_MAX, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CURRENT_MAX, |
| POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| POWER_SUPPLY_PROP_USB_TYPE, |
| }; |
| |
| static const struct power_supply_desc sm8350_usb_psy_desc = { |
| .name = "qcom-battmgr-usb", |
| .type = POWER_SUPPLY_TYPE_USB, |
| .properties = sm8350_usb_props, |
| .num_properties = ARRAY_SIZE(sm8350_usb_props), |
| .get_property = qcom_battmgr_usb_get_property, |
| .usb_types = usb_psy_supported_types, |
| .num_usb_types = ARRAY_SIZE(usb_psy_supported_types), |
| }; |
| |
| static const u8 sm8350_wls_prop_map[] = { |
| [POWER_SUPPLY_PROP_ONLINE] = WLS_ONLINE, |
| [POWER_SUPPLY_PROP_VOLTAGE_NOW] = WLS_VOLT_NOW, |
| [POWER_SUPPLY_PROP_VOLTAGE_MAX] = WLS_VOLT_MAX, |
| [POWER_SUPPLY_PROP_CURRENT_NOW] = WLS_CURR_NOW, |
| [POWER_SUPPLY_PROP_CURRENT_MAX] = WLS_CURR_MAX, |
| }; |
| |
| static int qcom_battmgr_wls_sm8350_update(struct qcom_battmgr *battmgr, |
| enum power_supply_property psp) |
| { |
| unsigned int prop; |
| int ret; |
| |
| if (psp >= ARRAY_SIZE(sm8350_wls_prop_map)) |
| return -EINVAL; |
| |
| prop = sm8350_wls_prop_map[psp]; |
| |
| mutex_lock(&battmgr->lock); |
| ret = qcom_battmgr_request_property(battmgr, BATTMGR_WLS_PROPERTY_GET, prop, 0); |
| mutex_unlock(&battmgr->lock); |
| |
| return ret; |
| } |
| |
| static int qcom_battmgr_wls_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy); |
| int ret; |
| |
| if (!battmgr->service_up) |
| return -ENODEV; |
| |
| if (battmgr->variant == QCOM_BATTMGR_SC8280XP) |
| ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp); |
| else |
| ret = qcom_battmgr_wls_sm8350_update(battmgr, psp); |
| if (ret < 0) |
| return ret; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = battmgr->wireless.online; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = battmgr->wireless.voltage_now; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: |
| val->intval = battmgr->wireless.voltage_max; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| val->intval = battmgr->wireless.current_now; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| val->intval = battmgr->wireless.current_max; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const enum power_supply_property sc8280xp_wls_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| }; |
| |
| static const struct power_supply_desc sc8280xp_wls_psy_desc = { |
| .name = "qcom-battmgr-wls", |
| .type = POWER_SUPPLY_TYPE_WIRELESS, |
| .properties = sc8280xp_wls_props, |
| .num_properties = ARRAY_SIZE(sc8280xp_wls_props), |
| .get_property = qcom_battmgr_wls_get_property, |
| }; |
| |
| static const enum power_supply_property sm8350_wls_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_VOLTAGE_MAX, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CURRENT_MAX, |
| }; |
| |
| static const struct power_supply_desc sm8350_wls_psy_desc = { |
| .name = "qcom-battmgr-wls", |
| .type = POWER_SUPPLY_TYPE_WIRELESS, |
| .properties = sm8350_wls_props, |
| .num_properties = ARRAY_SIZE(sm8350_wls_props), |
| .get_property = qcom_battmgr_wls_get_property, |
| }; |
| |
| static void qcom_battmgr_notification(struct qcom_battmgr *battmgr, |
| const struct qcom_battmgr_message *msg, |
| int len) |
| { |
| size_t payload_len = len - sizeof(struct pmic_glink_hdr); |
| unsigned int notification; |
| |
| if (payload_len != sizeof(msg->notification)) { |
| dev_warn(battmgr->dev, "ignoring notification with invalid length\n"); |
| return; |
| } |
| |
| notification = le32_to_cpu(msg->notification); |
| switch (notification) { |
| case NOTIF_BAT_INFO: |
| battmgr->info.valid = false; |
| fallthrough; |
| case NOTIF_BAT_STATUS: |
| case NOTIF_BAT_PROPERTY: |
| power_supply_changed(battmgr->bat_psy); |
| break; |
| case NOTIF_USB_PROPERTY: |
| power_supply_changed(battmgr->usb_psy); |
| break; |
| case NOTIF_WLS_PROPERTY: |
| power_supply_changed(battmgr->wls_psy); |
| break; |
| default: |
| dev_err(battmgr->dev, "unknown notification: %#x\n", notification); |
| break; |
| } |
| } |
| |
| static void qcom_battmgr_sc8280xp_strcpy(char *dest, const char *src) |
| { |
| size_t len = src[0]; |
| |
| /* Some firmware versions return Pascal-style strings */ |
| if (len < BATTMGR_STRING_LEN && len == strnlen(src + 1, BATTMGR_STRING_LEN - 1)) { |
| memcpy(dest, src + 1, len); |
| dest[len] = '\0'; |
| } else { |
| memcpy(dest, src, BATTMGR_STRING_LEN); |
| } |
| } |
| |
| static unsigned int qcom_battmgr_sc8280xp_parse_technology(const char *chemistry) |
| { |
| if (!strncmp(chemistry, "LIO", BATTMGR_CHEMISTRY_LEN)) |
| return POWER_SUPPLY_TECHNOLOGY_LION; |
| |
| pr_err("Unknown battery technology '%s'\n", chemistry); |
| return POWER_SUPPLY_TECHNOLOGY_UNKNOWN; |
| } |
| |
| static unsigned int qcom_battmgr_sc8280xp_convert_temp(unsigned int temperature) |
| { |
| return DIV_ROUND_CLOSEST(temperature, 10); |
| } |
| |
| static void qcom_battmgr_sc8280xp_callback(struct qcom_battmgr *battmgr, |
| const struct qcom_battmgr_message *resp, |
| size_t len) |
| { |
| unsigned int opcode = le32_to_cpu(resp->hdr.opcode); |
| unsigned int source; |
| unsigned int state; |
| size_t payload_len = len - sizeof(struct pmic_glink_hdr); |
| |
| if (payload_len < sizeof(__le32)) { |
| dev_warn(battmgr->dev, "invalid payload length for %#x: %zd\n", |
| opcode, len); |
| return; |
| } |
| |
| switch (opcode) { |
| case BATTMGR_REQUEST_NOTIFICATION: |
| battmgr->error = 0; |
| break; |
| case BATTMGR_BAT_INFO: |
| if (payload_len != sizeof(resp->info)) { |
| dev_warn(battmgr->dev, |
| "invalid payload length for battery information request: %zd\n", |
| payload_len); |
| battmgr->error = -ENODATA; |
| return; |
| } |
| |
| battmgr->unit = le32_to_cpu(resp->info.power_unit); |
| |
| battmgr->info.present = true; |
| battmgr->info.design_capacity = le32_to_cpu(resp->info.design_capacity) * 1000; |
| battmgr->info.last_full_capacity = le32_to_cpu(resp->info.last_full_capacity) * 1000; |
| battmgr->info.voltage_max_design = le32_to_cpu(resp->info.design_voltage) * 1000; |
| battmgr->info.capacity_low = le32_to_cpu(resp->info.capacity_low) * 1000; |
| battmgr->info.cycle_count = le32_to_cpu(resp->info.cycle_count); |
| qcom_battmgr_sc8280xp_strcpy(battmgr->info.model_number, resp->info.model_number); |
| qcom_battmgr_sc8280xp_strcpy(battmgr->info.serial_number, resp->info.serial_number); |
| battmgr->info.technology = qcom_battmgr_sc8280xp_parse_technology(resp->info.battery_chemistry); |
| qcom_battmgr_sc8280xp_strcpy(battmgr->info.oem_info, resp->info.oem_info); |
| battmgr->info.day = resp->info.day; |
| battmgr->info.month = resp->info.month; |
| battmgr->info.year = le16_to_cpu(resp->info.year); |
| break; |
| case BATTMGR_BAT_STATUS: |
| if (payload_len != sizeof(resp->status)) { |
| dev_warn(battmgr->dev, |
| "invalid payload length for battery status request: %zd\n", |
| payload_len); |
| battmgr->error = -ENODATA; |
| return; |
| } |
| |
| state = le32_to_cpu(resp->status.battery_state); |
| if (state & BIT(0)) |
| battmgr->status.status = POWER_SUPPLY_STATUS_DISCHARGING; |
| else if (state & BIT(1)) |
| battmgr->status.status = POWER_SUPPLY_STATUS_CHARGING; |
| else |
| battmgr->status.status = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| |
| battmgr->status.capacity = le32_to_cpu(resp->status.capacity) * 1000; |
| battmgr->status.power_now = le32_to_cpu(resp->status.rate) * 1000; |
| battmgr->status.voltage_now = le32_to_cpu(resp->status.battery_voltage) * 1000; |
| battmgr->status.temperature = qcom_battmgr_sc8280xp_convert_temp(le32_to_cpu(resp->status.temperature)); |
| |
| source = le32_to_cpu(resp->status.charging_source); |
| battmgr->ac.online = source == BATTMGR_CHARGING_SOURCE_AC; |
| battmgr->usb.online = source == BATTMGR_CHARGING_SOURCE_USB; |
| battmgr->wireless.online = source == BATTMGR_CHARGING_SOURCE_WIRELESS; |
| break; |
| case BATTMGR_BAT_DISCHARGE_TIME: |
| battmgr->status.discharge_time = le32_to_cpu(resp->time); |
| break; |
| case BATTMGR_BAT_CHARGE_TIME: |
| battmgr->status.charge_time = le32_to_cpu(resp->time); |
| break; |
| default: |
| dev_warn(battmgr->dev, "unknown message %#x\n", opcode); |
| break; |
| } |
| |
| complete(&battmgr->ack); |
| } |
| |
| static void qcom_battmgr_sm8350_callback(struct qcom_battmgr *battmgr, |
| const struct qcom_battmgr_message *resp, |
| size_t len) |
| { |
| unsigned int property; |
| unsigned int opcode = le32_to_cpu(resp->hdr.opcode); |
| size_t payload_len = len - sizeof(struct pmic_glink_hdr); |
| unsigned int val; |
| |
| if (payload_len < sizeof(__le32)) { |
| dev_warn(battmgr->dev, "invalid payload length for %#x: %zd\n", |
| opcode, len); |
| return; |
| } |
| |
| switch (opcode) { |
| case BATTMGR_BAT_PROPERTY_GET: |
| property = le32_to_cpu(resp->intval.property); |
| if (property == BATT_MODEL_NAME) { |
| if (payload_len != sizeof(resp->strval)) { |
| dev_warn(battmgr->dev, |
| "invalid payload length for BATT_MODEL_NAME request: %zd\n", |
| payload_len); |
| battmgr->error = -ENODATA; |
| return; |
| } |
| } else { |
| if (payload_len != sizeof(resp->intval)) { |
| dev_warn(battmgr->dev, |
| "invalid payload length for %#x request: %zd\n", |
| property, payload_len); |
| battmgr->error = -ENODATA; |
| return; |
| } |
| |
| battmgr->error = le32_to_cpu(resp->intval.result); |
| if (battmgr->error) |
| goto out_complete; |
| } |
| |
| switch (property) { |
| case BATT_STATUS: |
| battmgr->status.status = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_HEALTH: |
| battmgr->status.health = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_PRESENT: |
| battmgr->info.present = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_CHG_TYPE: |
| battmgr->info.charge_type = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_CAPACITY: |
| battmgr->status.percent = le32_to_cpu(resp->intval.value) / 100; |
| break; |
| case BATT_VOLT_OCV: |
| battmgr->status.voltage_ocv = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_VOLT_NOW: |
| battmgr->status.voltage_now = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_VOLT_MAX: |
| battmgr->info.voltage_max = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_CURR_NOW: |
| battmgr->status.current_now = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_TEMP: |
| val = le32_to_cpu(resp->intval.value); |
| battmgr->status.temperature = DIV_ROUND_CLOSEST(val, 10); |
| break; |
| case BATT_TECHNOLOGY: |
| battmgr->info.technology = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_CHG_COUNTER: |
| battmgr->info.charge_count = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_CYCLE_COUNT: |
| battmgr->info.cycle_count = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_CHG_FULL_DESIGN: |
| battmgr->info.design_capacity = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_CHG_FULL: |
| battmgr->info.last_full_capacity = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_MODEL_NAME: |
| strscpy(battmgr->info.model_number, resp->strval.model, BATTMGR_STRING_LEN); |
| break; |
| case BATT_TTF_AVG: |
| battmgr->status.charge_time = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_TTE_AVG: |
| battmgr->status.discharge_time = le32_to_cpu(resp->intval.value); |
| break; |
| case BATT_POWER_NOW: |
| battmgr->status.power_now = le32_to_cpu(resp->intval.value); |
| break; |
| default: |
| dev_warn(battmgr->dev, "unknown property %#x\n", property); |
| break; |
| } |
| break; |
| case BATTMGR_USB_PROPERTY_GET: |
| property = le32_to_cpu(resp->intval.property); |
| if (payload_len != sizeof(resp->intval)) { |
| dev_warn(battmgr->dev, |
| "invalid payload length for %#x request: %zd\n", |
| property, payload_len); |
| battmgr->error = -ENODATA; |
| return; |
| } |
| |
| battmgr->error = le32_to_cpu(resp->intval.result); |
| if (battmgr->error) |
| goto out_complete; |
| |
| switch (property) { |
| case USB_ONLINE: |
| battmgr->usb.online = le32_to_cpu(resp->intval.value); |
| break; |
| case USB_VOLT_NOW: |
| battmgr->usb.voltage_now = le32_to_cpu(resp->intval.value); |
| break; |
| case USB_VOLT_MAX: |
| battmgr->usb.voltage_max = le32_to_cpu(resp->intval.value); |
| break; |
| case USB_CURR_NOW: |
| battmgr->usb.current_now = le32_to_cpu(resp->intval.value); |
| break; |
| case USB_CURR_MAX: |
| battmgr->usb.current_max = le32_to_cpu(resp->intval.value); |
| break; |
| case USB_INPUT_CURR_LIMIT: |
| battmgr->usb.current_limit = le32_to_cpu(resp->intval.value); |
| break; |
| case USB_TYPE: |
| battmgr->usb.usb_type = le32_to_cpu(resp->intval.value); |
| break; |
| default: |
| dev_warn(battmgr->dev, "unknown property %#x\n", property); |
| break; |
| } |
| break; |
| case BATTMGR_WLS_PROPERTY_GET: |
| property = le32_to_cpu(resp->intval.property); |
| if (payload_len != sizeof(resp->intval)) { |
| dev_warn(battmgr->dev, |
| "invalid payload length for %#x request: %zd\n", |
| property, payload_len); |
| battmgr->error = -ENODATA; |
| return; |
| } |
| |
| battmgr->error = le32_to_cpu(resp->intval.result); |
| if (battmgr->error) |
| goto out_complete; |
| |
| switch (property) { |
| case WLS_ONLINE: |
| battmgr->wireless.online = le32_to_cpu(resp->intval.value); |
| break; |
| case WLS_VOLT_NOW: |
| battmgr->wireless.voltage_now = le32_to_cpu(resp->intval.value); |
| break; |
| case WLS_VOLT_MAX: |
| battmgr->wireless.voltage_max = le32_to_cpu(resp->intval.value); |
| break; |
| case WLS_CURR_NOW: |
| battmgr->wireless.current_now = le32_to_cpu(resp->intval.value); |
| break; |
| case WLS_CURR_MAX: |
| battmgr->wireless.current_max = le32_to_cpu(resp->intval.value); |
| break; |
| default: |
| dev_warn(battmgr->dev, "unknown property %#x\n", property); |
| break; |
| } |
| break; |
| case BATTMGR_REQUEST_NOTIFICATION: |
| battmgr->error = 0; |
| break; |
| default: |
| dev_warn(battmgr->dev, "unknown message %#x\n", opcode); |
| break; |
| } |
| |
| out_complete: |
| complete(&battmgr->ack); |
| } |
| |
| static void qcom_battmgr_callback(const void *data, size_t len, void *priv) |
| { |
| const struct pmic_glink_hdr *hdr = data; |
| struct qcom_battmgr *battmgr = priv; |
| unsigned int opcode = le32_to_cpu(hdr->opcode); |
| |
| if (opcode == BATTMGR_NOTIFICATION) |
| qcom_battmgr_notification(battmgr, data, len); |
| else if (battmgr->variant == QCOM_BATTMGR_SC8280XP) |
| qcom_battmgr_sc8280xp_callback(battmgr, data, len); |
| else |
| qcom_battmgr_sm8350_callback(battmgr, data, len); |
| } |
| |
| static void qcom_battmgr_enable_worker(struct work_struct *work) |
| { |
| struct qcom_battmgr *battmgr = container_of(work, struct qcom_battmgr, enable_work); |
| struct qcom_battmgr_enable_request req = { |
| .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR), |
| .hdr.type = cpu_to_le32(PMIC_GLINK_NOTIFY), |
| .hdr.opcode = cpu_to_le32(BATTMGR_REQUEST_NOTIFICATION), |
| }; |
| int ret; |
| |
| ret = qcom_battmgr_request(battmgr, &req, sizeof(req)); |
| if (ret) |
| dev_err(battmgr->dev, "failed to request power notifications\n"); |
| } |
| |
| static void qcom_battmgr_pdr_notify(void *priv, int state) |
| { |
| struct qcom_battmgr *battmgr = priv; |
| |
| if (state == SERVREG_SERVICE_STATE_UP) { |
| battmgr->service_up = true; |
| schedule_work(&battmgr->enable_work); |
| } else { |
| battmgr->service_up = false; |
| } |
| } |
| |
| static const struct of_device_id qcom_battmgr_of_variants[] = { |
| { .compatible = "qcom,sc8180x-pmic-glink", .data = (void *)QCOM_BATTMGR_SC8280XP }, |
| { .compatible = "qcom,sc8280xp-pmic-glink", .data = (void *)QCOM_BATTMGR_SC8280XP }, |
| /* Unmatched devices falls back to QCOM_BATTMGR_SM8350 */ |
| {} |
| }; |
| |
| static char *qcom_battmgr_battery[] = { "battery" }; |
| |
| static int qcom_battmgr_probe(struct auxiliary_device *adev, |
| const struct auxiliary_device_id *id) |
| { |
| struct power_supply_config psy_cfg_supply = {}; |
| struct power_supply_config psy_cfg = {}; |
| const struct of_device_id *match; |
| struct qcom_battmgr *battmgr; |
| struct device *dev = &adev->dev; |
| |
| battmgr = devm_kzalloc(dev, sizeof(*battmgr), GFP_KERNEL); |
| if (!battmgr) |
| return -ENOMEM; |
| |
| battmgr->dev = dev; |
| |
| psy_cfg.drv_data = battmgr; |
| psy_cfg.of_node = adev->dev.of_node; |
| |
| psy_cfg_supply.drv_data = battmgr; |
| psy_cfg_supply.of_node = adev->dev.of_node; |
| psy_cfg_supply.supplied_to = qcom_battmgr_battery; |
| psy_cfg_supply.num_supplicants = 1; |
| |
| INIT_WORK(&battmgr->enable_work, qcom_battmgr_enable_worker); |
| mutex_init(&battmgr->lock); |
| init_completion(&battmgr->ack); |
| |
| match = of_match_device(qcom_battmgr_of_variants, dev->parent); |
| if (match) |
| battmgr->variant = (unsigned long)match->data; |
| else |
| battmgr->variant = QCOM_BATTMGR_SM8350; |
| |
| if (battmgr->variant == QCOM_BATTMGR_SC8280XP) { |
| battmgr->bat_psy = devm_power_supply_register(dev, &sc8280xp_bat_psy_desc, &psy_cfg); |
| if (IS_ERR(battmgr->bat_psy)) |
| return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy), |
| "failed to register battery power supply\n"); |
| |
| battmgr->ac_psy = devm_power_supply_register(dev, &sc8280xp_ac_psy_desc, &psy_cfg_supply); |
| if (IS_ERR(battmgr->ac_psy)) |
| return dev_err_probe(dev, PTR_ERR(battmgr->ac_psy), |
| "failed to register AC power supply\n"); |
| |
| battmgr->usb_psy = devm_power_supply_register(dev, &sc8280xp_usb_psy_desc, &psy_cfg_supply); |
| if (IS_ERR(battmgr->usb_psy)) |
| return dev_err_probe(dev, PTR_ERR(battmgr->usb_psy), |
| "failed to register USB power supply\n"); |
| |
| battmgr->wls_psy = devm_power_supply_register(dev, &sc8280xp_wls_psy_desc, &psy_cfg_supply); |
| if (IS_ERR(battmgr->wls_psy)) |
| return dev_err_probe(dev, PTR_ERR(battmgr->wls_psy), |
| "failed to register wireless charing power supply\n"); |
| } else { |
| battmgr->bat_psy = devm_power_supply_register(dev, &sm8350_bat_psy_desc, &psy_cfg); |
| if (IS_ERR(battmgr->bat_psy)) |
| return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy), |
| "failed to register battery power supply\n"); |
| |
| battmgr->usb_psy = devm_power_supply_register(dev, &sm8350_usb_psy_desc, &psy_cfg_supply); |
| if (IS_ERR(battmgr->usb_psy)) |
| return dev_err_probe(dev, PTR_ERR(battmgr->usb_psy), |
| "failed to register USB power supply\n"); |
| |
| battmgr->wls_psy = devm_power_supply_register(dev, &sm8350_wls_psy_desc, &psy_cfg_supply); |
| if (IS_ERR(battmgr->wls_psy)) |
| return dev_err_probe(dev, PTR_ERR(battmgr->wls_psy), |
| "failed to register wireless charing power supply\n"); |
| } |
| |
| battmgr->client = devm_pmic_glink_register_client(dev, |
| PMIC_GLINK_OWNER_BATTMGR, |
| qcom_battmgr_callback, |
| qcom_battmgr_pdr_notify, |
| battmgr); |
| return PTR_ERR_OR_ZERO(battmgr->client); |
| } |
| |
| static const struct auxiliary_device_id qcom_battmgr_id_table[] = { |
| { .name = "pmic_glink.power-supply", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(auxiliary, qcom_battmgr_id_table); |
| |
| static struct auxiliary_driver qcom_battmgr_driver = { |
| .name = "pmic_glink_power_supply", |
| .probe = qcom_battmgr_probe, |
| .id_table = qcom_battmgr_id_table, |
| }; |
| |
| module_auxiliary_driver(qcom_battmgr_driver); |
| |
| MODULE_DESCRIPTION("Qualcomm PMIC GLINK battery manager driver"); |
| MODULE_LICENSE("GPL"); |