| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * MPS2 UART driver |
| * |
| * Copyright (C) 2015 ARM Limited |
| * |
| * Author: Vladimir Murzin <vladimir.murzin@arm.com> |
| * |
| * TODO: support for SysRq |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/console.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial_core.h> |
| #include <linux/tty_flip.h> |
| #include <linux/types.h> |
| #include <linux/idr.h> |
| |
| #define SERIAL_NAME "ttyMPS" |
| #define DRIVER_NAME "mps2-uart" |
| #define MAKE_NAME(x) (DRIVER_NAME # x) |
| |
| #define UARTn_DATA 0x00 |
| |
| #define UARTn_STATE 0x04 |
| #define UARTn_STATE_TX_FULL BIT(0) |
| #define UARTn_STATE_RX_FULL BIT(1) |
| #define UARTn_STATE_TX_OVERRUN BIT(2) |
| #define UARTn_STATE_RX_OVERRUN BIT(3) |
| |
| #define UARTn_CTRL 0x08 |
| #define UARTn_CTRL_TX_ENABLE BIT(0) |
| #define UARTn_CTRL_RX_ENABLE BIT(1) |
| #define UARTn_CTRL_TX_INT_ENABLE BIT(2) |
| #define UARTn_CTRL_RX_INT_ENABLE BIT(3) |
| #define UARTn_CTRL_TX_OVERRUN_INT_ENABLE BIT(4) |
| #define UARTn_CTRL_RX_OVERRUN_INT_ENABLE BIT(5) |
| |
| #define UARTn_INT 0x0c |
| #define UARTn_INT_TX BIT(0) |
| #define UARTn_INT_RX BIT(1) |
| #define UARTn_INT_TX_OVERRUN BIT(2) |
| #define UARTn_INT_RX_OVERRUN BIT(3) |
| |
| #define UARTn_BAUDDIV 0x10 |
| #define UARTn_BAUDDIV_MASK GENMASK(20, 0) |
| |
| /* |
| * Helpers to make typical enable/disable operations more readable. |
| */ |
| #define UARTn_CTRL_TX_GRP (UARTn_CTRL_TX_ENABLE |\ |
| UARTn_CTRL_TX_INT_ENABLE |\ |
| UARTn_CTRL_TX_OVERRUN_INT_ENABLE) |
| |
| #define UARTn_CTRL_RX_GRP (UARTn_CTRL_RX_ENABLE |\ |
| UARTn_CTRL_RX_INT_ENABLE |\ |
| UARTn_CTRL_RX_OVERRUN_INT_ENABLE) |
| |
| #define MPS2_MAX_PORTS 3 |
| |
| #define UART_PORT_COMBINED_IRQ BIT(0) |
| |
| struct mps2_uart_port { |
| struct uart_port port; |
| struct clk *clk; |
| unsigned int tx_irq; |
| unsigned int rx_irq; |
| unsigned int flags; |
| }; |
| |
| static inline struct mps2_uart_port *to_mps2_port(struct uart_port *port) |
| { |
| return container_of(port, struct mps2_uart_port, port); |
| } |
| |
| static void mps2_uart_write8(struct uart_port *port, u8 val, unsigned int off) |
| { |
| struct mps2_uart_port *mps_port = to_mps2_port(port); |
| |
| writeb(val, mps_port->port.membase + off); |
| } |
| |
| static u8 mps2_uart_read8(struct uart_port *port, unsigned int off) |
| { |
| struct mps2_uart_port *mps_port = to_mps2_port(port); |
| |
| return readb(mps_port->port.membase + off); |
| } |
| |
| static void mps2_uart_write32(struct uart_port *port, u32 val, unsigned int off) |
| { |
| struct mps2_uart_port *mps_port = to_mps2_port(port); |
| |
| writel_relaxed(val, mps_port->port.membase + off); |
| } |
| |
| static unsigned int mps2_uart_tx_empty(struct uart_port *port) |
| { |
| u8 status = mps2_uart_read8(port, UARTn_STATE); |
| |
| return (status & UARTn_STATE_TX_FULL) ? 0 : TIOCSER_TEMT; |
| } |
| |
| static void mps2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) |
| { |
| } |
| |
| static unsigned int mps2_uart_get_mctrl(struct uart_port *port) |
| { |
| return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR; |
| } |
| |
| static void mps2_uart_stop_tx(struct uart_port *port) |
| { |
| u8 control = mps2_uart_read8(port, UARTn_CTRL); |
| |
| control &= ~UARTn_CTRL_TX_INT_ENABLE; |
| |
| mps2_uart_write8(port, control, UARTn_CTRL); |
| } |
| |
| static void mps2_uart_tx_chars(struct uart_port *port) |
| { |
| u8 ch; |
| |
| uart_port_tx(port, ch, |
| mps2_uart_tx_empty(port), |
| mps2_uart_write8(port, ch, UARTn_DATA)); |
| } |
| |
| static void mps2_uart_start_tx(struct uart_port *port) |
| { |
| u8 control = mps2_uart_read8(port, UARTn_CTRL); |
| |
| control |= UARTn_CTRL_TX_INT_ENABLE; |
| |
| mps2_uart_write8(port, control, UARTn_CTRL); |
| |
| /* |
| * We've just unmasked the TX IRQ and now slow-starting via |
| * polling; if there is enough data to fill up the internal |
| * write buffer in one go, the TX IRQ should assert, at which |
| * point we switch to fully interrupt-driven TX. |
| */ |
| |
| mps2_uart_tx_chars(port); |
| } |
| |
| static void mps2_uart_stop_rx(struct uart_port *port) |
| { |
| u8 control = mps2_uart_read8(port, UARTn_CTRL); |
| |
| control &= ~UARTn_CTRL_RX_GRP; |
| |
| mps2_uart_write8(port, control, UARTn_CTRL); |
| } |
| |
| static void mps2_uart_break_ctl(struct uart_port *port, int ctl) |
| { |
| } |
| |
| static void mps2_uart_rx_chars(struct uart_port *port) |
| { |
| struct tty_port *tport = &port->state->port; |
| |
| while (mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_RX_FULL) { |
| u8 rxdata = mps2_uart_read8(port, UARTn_DATA); |
| |
| port->icount.rx++; |
| tty_insert_flip_char(&port->state->port, rxdata, TTY_NORMAL); |
| } |
| |
| tty_flip_buffer_push(tport); |
| } |
| |
| static irqreturn_t mps2_uart_rxirq(int irq, void *data) |
| { |
| struct uart_port *port = data; |
| u8 irqflag = mps2_uart_read8(port, UARTn_INT); |
| |
| if (unlikely(!(irqflag & UARTn_INT_RX))) |
| return IRQ_NONE; |
| |
| uart_port_lock(port); |
| |
| mps2_uart_write8(port, UARTn_INT_RX, UARTn_INT); |
| mps2_uart_rx_chars(port); |
| |
| uart_port_unlock(port); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t mps2_uart_txirq(int irq, void *data) |
| { |
| struct uart_port *port = data; |
| u8 irqflag = mps2_uart_read8(port, UARTn_INT); |
| |
| if (unlikely(!(irqflag & UARTn_INT_TX))) |
| return IRQ_NONE; |
| |
| uart_port_lock(port); |
| |
| mps2_uart_write8(port, UARTn_INT_TX, UARTn_INT); |
| mps2_uart_tx_chars(port); |
| |
| uart_port_unlock(port); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t mps2_uart_oerrirq(int irq, void *data) |
| { |
| irqreturn_t handled = IRQ_NONE; |
| struct uart_port *port = data; |
| u8 irqflag = mps2_uart_read8(port, UARTn_INT); |
| |
| uart_port_lock(port); |
| |
| if (irqflag & UARTn_INT_RX_OVERRUN) { |
| struct tty_port *tport = &port->state->port; |
| |
| mps2_uart_write8(port, UARTn_INT_RX_OVERRUN, UARTn_INT); |
| port->icount.overrun++; |
| tty_insert_flip_char(tport, 0, TTY_OVERRUN); |
| tty_flip_buffer_push(tport); |
| handled = IRQ_HANDLED; |
| } |
| |
| /* |
| * It's never been seen in practice and it never *should* happen since |
| * we check if there is enough room in TX buffer before sending data. |
| * So we keep this check in case something suspicious has happened. |
| */ |
| if (irqflag & UARTn_INT_TX_OVERRUN) { |
| mps2_uart_write8(port, UARTn_INT_TX_OVERRUN, UARTn_INT); |
| handled = IRQ_HANDLED; |
| } |
| |
| uart_port_unlock(port); |
| |
| return handled; |
| } |
| |
| static irqreturn_t mps2_uart_combinedirq(int irq, void *data) |
| { |
| if (mps2_uart_rxirq(irq, data) == IRQ_HANDLED) |
| return IRQ_HANDLED; |
| |
| if (mps2_uart_txirq(irq, data) == IRQ_HANDLED) |
| return IRQ_HANDLED; |
| |
| if (mps2_uart_oerrirq(irq, data) == IRQ_HANDLED) |
| return IRQ_HANDLED; |
| |
| return IRQ_NONE; |
| } |
| |
| static int mps2_uart_startup(struct uart_port *port) |
| { |
| struct mps2_uart_port *mps_port = to_mps2_port(port); |
| u8 control = mps2_uart_read8(port, UARTn_CTRL); |
| int ret; |
| |
| control &= ~(UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP); |
| |
| mps2_uart_write8(port, control, UARTn_CTRL); |
| |
| if (mps_port->flags & UART_PORT_COMBINED_IRQ) { |
| ret = request_irq(port->irq, mps2_uart_combinedirq, 0, |
| MAKE_NAME(-combined), mps_port); |
| |
| if (ret) { |
| dev_err(port->dev, "failed to register combinedirq (%d)\n", ret); |
| return ret; |
| } |
| } else { |
| ret = request_irq(port->irq, mps2_uart_oerrirq, IRQF_SHARED, |
| MAKE_NAME(-overrun), mps_port); |
| |
| if (ret) { |
| dev_err(port->dev, "failed to register oerrirq (%d)\n", ret); |
| return ret; |
| } |
| |
| ret = request_irq(mps_port->rx_irq, mps2_uart_rxirq, 0, |
| MAKE_NAME(-rx), mps_port); |
| if (ret) { |
| dev_err(port->dev, "failed to register rxirq (%d)\n", ret); |
| goto err_free_oerrirq; |
| } |
| |
| ret = request_irq(mps_port->tx_irq, mps2_uart_txirq, 0, |
| MAKE_NAME(-tx), mps_port); |
| if (ret) { |
| dev_err(port->dev, "failed to register txirq (%d)\n", ret); |
| goto err_free_rxirq; |
| } |
| |
| } |
| |
| control |= UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP; |
| |
| mps2_uart_write8(port, control, UARTn_CTRL); |
| |
| return 0; |
| |
| err_free_rxirq: |
| free_irq(mps_port->rx_irq, mps_port); |
| err_free_oerrirq: |
| free_irq(port->irq, mps_port); |
| |
| return ret; |
| } |
| |
| static void mps2_uart_shutdown(struct uart_port *port) |
| { |
| struct mps2_uart_port *mps_port = to_mps2_port(port); |
| u8 control = mps2_uart_read8(port, UARTn_CTRL); |
| |
| control &= ~(UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP); |
| |
| mps2_uart_write8(port, control, UARTn_CTRL); |
| |
| if (!(mps_port->flags & UART_PORT_COMBINED_IRQ)) { |
| free_irq(mps_port->rx_irq, mps_port); |
| free_irq(mps_port->tx_irq, mps_port); |
| } |
| |
| free_irq(port->irq, mps_port); |
| } |
| |
| static void |
| mps2_uart_set_termios(struct uart_port *port, struct ktermios *termios, |
| const struct ktermios *old) |
| { |
| unsigned long flags; |
| unsigned int baud, bauddiv; |
| |
| termios->c_cflag &= ~(CRTSCTS | CMSPAR); |
| termios->c_cflag &= ~CSIZE; |
| termios->c_cflag |= CS8; |
| termios->c_cflag &= ~PARENB; |
| termios->c_cflag &= ~CSTOPB; |
| |
| baud = uart_get_baud_rate(port, termios, old, |
| DIV_ROUND_CLOSEST(port->uartclk, UARTn_BAUDDIV_MASK), |
| DIV_ROUND_CLOSEST(port->uartclk, 16)); |
| |
| bauddiv = DIV_ROUND_CLOSEST(port->uartclk, baud); |
| |
| uart_port_lock_irqsave(port, &flags); |
| |
| uart_update_timeout(port, termios->c_cflag, baud); |
| mps2_uart_write32(port, bauddiv, UARTn_BAUDDIV); |
| |
| uart_port_unlock_irqrestore(port, flags); |
| |
| if (tty_termios_baud_rate(termios)) |
| tty_termios_encode_baud_rate(termios, baud, baud); |
| } |
| |
| static const char *mps2_uart_type(struct uart_port *port) |
| { |
| return (port->type == PORT_MPS2UART) ? DRIVER_NAME : NULL; |
| } |
| |
| static void mps2_uart_release_port(struct uart_port *port) |
| { |
| } |
| |
| static int mps2_uart_request_port(struct uart_port *port) |
| { |
| return 0; |
| } |
| |
| static void mps2_uart_config_port(struct uart_port *port, int type) |
| { |
| if (type & UART_CONFIG_TYPE && !mps2_uart_request_port(port)) |
| port->type = PORT_MPS2UART; |
| } |
| |
| static int mps2_uart_verify_port(struct uart_port *port, struct serial_struct *serinfo) |
| { |
| return -EINVAL; |
| } |
| |
| static const struct uart_ops mps2_uart_pops = { |
| .tx_empty = mps2_uart_tx_empty, |
| .set_mctrl = mps2_uart_set_mctrl, |
| .get_mctrl = mps2_uart_get_mctrl, |
| .stop_tx = mps2_uart_stop_tx, |
| .start_tx = mps2_uart_start_tx, |
| .stop_rx = mps2_uart_stop_rx, |
| .break_ctl = mps2_uart_break_ctl, |
| .startup = mps2_uart_startup, |
| .shutdown = mps2_uart_shutdown, |
| .set_termios = mps2_uart_set_termios, |
| .type = mps2_uart_type, |
| .release_port = mps2_uart_release_port, |
| .request_port = mps2_uart_request_port, |
| .config_port = mps2_uart_config_port, |
| .verify_port = mps2_uart_verify_port, |
| }; |
| |
| static DEFINE_IDR(ports_idr); |
| |
| #ifdef CONFIG_SERIAL_MPS2_UART_CONSOLE |
| static void mps2_uart_console_putchar(struct uart_port *port, unsigned char ch) |
| { |
| while (mps2_uart_read8(port, UARTn_STATE) & UARTn_STATE_TX_FULL) |
| cpu_relax(); |
| |
| mps2_uart_write8(port, ch, UARTn_DATA); |
| } |
| |
| static void mps2_uart_console_write(struct console *co, const char *s, unsigned int cnt) |
| { |
| struct mps2_uart_port *mps_port = idr_find(&ports_idr, co->index); |
| struct uart_port *port = &mps_port->port; |
| |
| uart_console_write(port, s, cnt, mps2_uart_console_putchar); |
| } |
| |
| static int mps2_uart_console_setup(struct console *co, char *options) |
| { |
| struct mps2_uart_port *mps_port; |
| int baud = 9600; |
| int bits = 8; |
| int parity = 'n'; |
| int flow = 'n'; |
| |
| if (co->index < 0 || co->index >= MPS2_MAX_PORTS) |
| return -ENODEV; |
| |
| mps_port = idr_find(&ports_idr, co->index); |
| |
| if (!mps_port) |
| return -ENODEV; |
| |
| if (options) |
| uart_parse_options(options, &baud, &parity, &bits, &flow); |
| |
| return uart_set_options(&mps_port->port, co, baud, parity, bits, flow); |
| } |
| |
| static struct uart_driver mps2_uart_driver; |
| |
| static struct console mps2_uart_console = { |
| .name = SERIAL_NAME, |
| .device = uart_console_device, |
| .write = mps2_uart_console_write, |
| .setup = mps2_uart_console_setup, |
| .flags = CON_PRINTBUFFER, |
| .index = -1, |
| .data = &mps2_uart_driver, |
| }; |
| |
| #define MPS2_SERIAL_CONSOLE (&mps2_uart_console) |
| |
| static void mps2_early_putchar(struct uart_port *port, unsigned char ch) |
| { |
| while (readb(port->membase + UARTn_STATE) & UARTn_STATE_TX_FULL) |
| cpu_relax(); |
| |
| writeb((unsigned char)ch, port->membase + UARTn_DATA); |
| } |
| |
| static void mps2_early_write(struct console *con, const char *s, unsigned int n) |
| { |
| struct earlycon_device *dev = con->data; |
| |
| uart_console_write(&dev->port, s, n, mps2_early_putchar); |
| } |
| |
| static int __init mps2_early_console_setup(struct earlycon_device *device, |
| const char *opt) |
| { |
| if (!device->port.membase) |
| return -ENODEV; |
| |
| device->con->write = mps2_early_write; |
| |
| return 0; |
| } |
| |
| OF_EARLYCON_DECLARE(mps2, "arm,mps2-uart", mps2_early_console_setup); |
| |
| #else |
| #define MPS2_SERIAL_CONSOLE NULL |
| #endif |
| |
| static struct uart_driver mps2_uart_driver = { |
| .driver_name = DRIVER_NAME, |
| .dev_name = SERIAL_NAME, |
| .nr = MPS2_MAX_PORTS, |
| .cons = MPS2_SERIAL_CONSOLE, |
| }; |
| |
| static int mps2_of_get_port(struct platform_device *pdev, |
| struct mps2_uart_port *mps_port) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| int id; |
| |
| if (!np) |
| return -ENODEV; |
| |
| id = of_alias_get_id(np, "serial"); |
| |
| if (id < 0) |
| id = idr_alloc_cyclic(&ports_idr, (void *)mps_port, 0, MPS2_MAX_PORTS, GFP_KERNEL); |
| else |
| id = idr_alloc(&ports_idr, (void *)mps_port, id, MPS2_MAX_PORTS, GFP_KERNEL); |
| |
| if (id < 0) |
| return id; |
| |
| /* Only combined irq is presesnt */ |
| if (platform_irq_count(pdev) == 1) |
| mps_port->flags |= UART_PORT_COMBINED_IRQ; |
| |
| mps_port->port.line = id; |
| |
| return 0; |
| } |
| |
| static int mps2_init_port(struct platform_device *pdev, |
| struct mps2_uart_port *mps_port) |
| { |
| struct resource *res; |
| int ret; |
| |
| mps_port->port.membase = devm_platform_get_and_ioremap_resource(pdev, 0, &res); |
| if (IS_ERR(mps_port->port.membase)) |
| return PTR_ERR(mps_port->port.membase); |
| |
| mps_port->port.mapbase = res->start; |
| mps_port->port.mapsize = resource_size(res); |
| mps_port->port.iotype = UPIO_MEM; |
| mps_port->port.flags = UPF_BOOT_AUTOCONF; |
| mps_port->port.fifosize = 1; |
| mps_port->port.ops = &mps2_uart_pops; |
| mps_port->port.dev = &pdev->dev; |
| |
| mps_port->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(mps_port->clk)) |
| return PTR_ERR(mps_port->clk); |
| |
| ret = clk_prepare_enable(mps_port->clk); |
| if (ret) |
| return ret; |
| |
| mps_port->port.uartclk = clk_get_rate(mps_port->clk); |
| |
| clk_disable_unprepare(mps_port->clk); |
| |
| |
| if (mps_port->flags & UART_PORT_COMBINED_IRQ) { |
| mps_port->port.irq = platform_get_irq(pdev, 0); |
| } else { |
| mps_port->rx_irq = platform_get_irq(pdev, 0); |
| mps_port->tx_irq = platform_get_irq(pdev, 1); |
| mps_port->port.irq = platform_get_irq(pdev, 2); |
| } |
| |
| return ret; |
| } |
| |
| static int mps2_serial_probe(struct platform_device *pdev) |
| { |
| struct mps2_uart_port *mps_port; |
| int ret; |
| |
| mps_port = devm_kzalloc(&pdev->dev, sizeof(struct mps2_uart_port), GFP_KERNEL); |
| |
| if (!mps_port) |
| return -ENOMEM; |
| |
| ret = mps2_of_get_port(pdev, mps_port); |
| if (ret) |
| return ret; |
| |
| ret = mps2_init_port(pdev, mps_port); |
| if (ret) |
| return ret; |
| |
| ret = uart_add_one_port(&mps2_uart_driver, &mps_port->port); |
| if (ret) |
| return ret; |
| |
| platform_set_drvdata(pdev, mps_port); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id mps2_match[] = { |
| { .compatible = "arm,mps2-uart", }, |
| {}, |
| }; |
| #endif |
| |
| static struct platform_driver mps2_serial_driver = { |
| .probe = mps2_serial_probe, |
| |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = of_match_ptr(mps2_match), |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| |
| static int __init mps2_uart_init(void) |
| { |
| int ret; |
| |
| ret = uart_register_driver(&mps2_uart_driver); |
| if (ret) |
| return ret; |
| |
| ret = platform_driver_register(&mps2_serial_driver); |
| if (ret) |
| uart_unregister_driver(&mps2_uart_driver); |
| |
| return ret; |
| } |
| arch_initcall(mps2_uart_init); |