| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Allwinner A31 Dynamic Range Controller |
| |
| maintainers: |
| - Chen-Yu Tsai <wens@csie.org> |
| - Maxime Ripard <mripard@kernel.org> |
| |
| description: | |
| The DRC (Dynamic Range Controller) allows to dynamically adjust |
| pixel brightness/contrast based on histogram measurements for LCD |
| content adaptive backlight control. |
| |
| properties: |
| compatible: |
| enum: |
| - allwinner,sun6i-a31-drc |
| - allwinner,sun6i-a31s-drc |
| - allwinner,sun8i-a23-drc |
| - allwinner,sun8i-a33-drc |
| - allwinner,sun9i-a80-drc |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| clocks: |
| items: |
| - description: The DRC interface clock |
| - description: The DRC module clock |
| - description: The DRC DRAM clock |
| |
| clock-names: |
| items: |
| - const: ahb |
| - const: mod |
| - const: ram |
| |
| resets: |
| maxItems: 1 |
| |
| ports: |
| $ref: /schemas/graph.yaml#/properties/ports |
| |
| properties: |
| port@0: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: | |
| Input endpoints of the controller. |
| |
| port@1: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: | |
| Output endpoints of the controller. |
| |
| required: |
| - port@0 |
| - port@1 |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| - clocks |
| - clock-names |
| - resets |
| - ports |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| #include <dt-bindings/clock/sun6i-a31-ccu.h> |
| #include <dt-bindings/reset/sun6i-a31-ccu.h> |
| |
| drc0: drc@1e70000 { |
| compatible = "allwinner,sun6i-a31-drc"; |
| reg = <0x01e70000 0x10000>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>, |
| <&ccu CLK_DRAM_DRC0>; |
| clock-names = "ahb", "mod", |
| "ram"; |
| resets = <&ccu RST_AHB1_DRC0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| drc0_in: port@0 { |
| reg = <0>; |
| |
| drc0_in_be0: endpoint { |
| remote-endpoint = <&be0_out_drc0>; |
| }; |
| }; |
| |
| drc0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| drc0_out_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_in_drc0>; |
| }; |
| |
| drc0_out_tcon1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&tcon1_in_drc0>; |
| }; |
| }; |
| }; |
| }; |
| |
| |
| ... |
