blob: 24cb38673581d7391f877d3af5fadd6096c8d5be [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8550.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SM8550 PCI Express Root Complex
maintainers:
- Bjorn Andersson <andersson@kernel.org>
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
description:
Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on
the Synopsys DesignWare PCIe IP.
properties:
compatible:
oneOf:
- const: qcom,pcie-sm8550
- items:
- enum:
- qcom,pcie-sm8650
- const: qcom,pcie-sm8550
reg:
minItems: 5
maxItems: 6
reg-names:
minItems: 5
items:
- const: parf # Qualcomm specific registers
- const: dbi # DesignWare PCIe registers
- const: elbi # External local bus interface registers
- const: atu # ATU address space
- const: config # PCIe configuration space
- const: mhi # MHI registers
clocks:
minItems: 7
maxItems: 8
clock-names:
minItems: 7
items:
- const: aux # Auxiliary clock
- const: cfg # Configuration clock
- const: bus_master # Master AXI clock
- const: bus_slave # Slave AXI clock
- const: slave_q2a # Slave Q2A clock
- const: ddrss_sf_tbu # PCIe SF TBU clock
- const: noc_aggr # Aggre NoC PCIe AXI clock
- const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
interrupts:
minItems: 8
maxItems: 8
interrupt-names:
items:
- const: msi0
- const: msi1
- const: msi2
- const: msi3
- const: msi4
- const: msi5
- const: msi6
- const: msi7
resets:
minItems: 1
maxItems: 2
reset-names:
minItems: 1
items:
- const: pci # PCIe core reset
- const: link_down # PCIe link down reset
allOf:
- $ref: qcom,pcie-common.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,sm8550-gcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pcie@1c00000 {
compatible = "qcom,pcie-sm8550";
reg = <0 0x01c00000 0 0x3000>,
<0 0x60000000 0 0xf1d>,
<0 0x60000f20 0 0xa8>,
<0 0x60001000 0 0x1000>,
<0 0x60100000 0 0x100000>;
reg-names = "parf", "dbi", "elbi", "atu", "config";
ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
<0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
bus-range = <0x00 0xff>;
device_type = "pci";
linux,pci-domain = <0>;
num-lanes = <2>;
#address-cells = <3>;
#size-cells = <2>;
clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
<&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
<&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
clock-names = "aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a",
"ddrss_sf_tbu",
"noc_aggr";
dma-coherent;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0", "msi1", "msi2", "msi3",
"msi4", "msi5", "msi6", "msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
<0x100 &apps_smmu 0x1401 0x1>;
phys = <&pcie0_phy>;
phy-names = "pciephy";
pinctrl-0 = <&pcie0_default_state>;
pinctrl-names = "default";
power-domains = <&gcc PCIE_0_GDSC>;
resets = <&gcc GCC_PCIE_0_BCR>;
reset-names = "pci";
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
};
};