blob: 395d33855d484ac5e65135ac44bdbc4417011b3c [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/allwinner,sun8i-v3s-usb-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner V3s USB PHY
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
properties:
"#phy-cells":
const: 1
compatible:
const: allwinner,sun8i-v3s-usb-phy
reg:
items:
- description: PHY Control registers
- description: PHY PMU0 registers
reg-names:
items:
- const: phy_ctrl
- const: pmu0
clocks:
maxItems: 1
description: USB OTG PHY bus clock
clock-names:
const: usb0_phy
resets:
maxItems: 1
description: USB OTG reset
reset-names:
const: usb0_reset
usb0_id_det-gpios:
maxItems: 1
description: GPIO to the USB OTG ID pin
usb0_vbus_det-gpios:
maxItems: 1
description: GPIO to the USB OTG VBUS detect pin
usb0_vbus_power-supply:
description: Power supply to detect the USB OTG VBUS
usb0_vbus-supply:
description: Regulator controlling USB OTG VBUS
required:
- "#phy-cells"
- compatible
- clocks
- clock-names
- reg
- reg-names
- resets
- reset-names
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/sun8i-v3s-ccu.h>
#include <dt-bindings/reset/sun8i-v3s-ccu.h>
phy@1c19400 {
#phy-cells = <1>;
compatible = "allwinner,sun8i-v3s-usb-phy";
reg = <0x01c19400 0x2c>,
<0x01c1a800 0x4>;
reg-names = "phy_ctrl",
"pmu0";
clocks = <&ccu CLK_USB_PHY0>;
clock-names = "usb0_phy";
resets = <&ccu RST_USB_PHY0>;
reset-names = "usb0_reset";
usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
};