blob: 88be13268962176eef47d55b4887c75703eb2302 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
maintainers:
- Andy Gross <agross@kernel.org>
- Bjorn Andersson <bjorn.andersson@linaro.org>
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
description:
The QUP core is an AHB slave that provides a common data path (an output FIFO
and an input FIFO) for serial peripheral interface (SPI) mini-core.
SPI in master mode supports up to 50MHz, up to four chip selects,
programmable data path from 4 bits to 32 bits and numerous protocol variants.
allOf:
- $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
enum:
- qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064
- qcom,spi-qup-v2.1.1 # for 8974 and later
- qcom,spi-qup-v2.2.1 # for 8974 v2 and later
clocks:
maxItems: 2
clock-names:
items:
- const: core
- const: iface
dmas:
maxItems: 2
dma-names:
items:
- const: tx
- const: rx
interconnects:
maxItems: 1
interrupts:
maxItems: 1
operating-points-v2: true
power-domains:
maxItems: 1
reg:
maxItems: 1
required:
- compatible
- clocks
- clock-names
- interrupts
- reg
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/interconnect/qcom,msm8996.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
spi@7575000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x07575000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_spi1_default>;
pinctrl-1 = <&blsp1_spi1_sleep>;
dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
dma-names = "tx", "rx";
power-domains = <&rpmpd MSM8996_VDDCX>;
operating-points-v2 = <&spi_opp_table>;
interconnects = <&pnoc MASTER_BLSP_1 &bimc SLAVE_EBI_CH0>;
#address-cells = <1>;
#size-cells = <0>;
};