| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| /* |
| * Copyright 2022 Toradex |
| */ |
| |
| #include <dt-bindings/leds/common.h> |
| |
| / { |
| aliases { |
| rtc0 = &rtc_i2c; |
| rtc1 = &rtc; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_leds_ixora>; |
| |
| /* LED_4_GREEN / MXM3_188 */ |
| led-1 { |
| color = <LED_COLOR_ID_GREEN>; |
| default-state = "off"; |
| function = LED_FUNCTION_STATUS; |
| gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| /* LED_4_RED / MXM3_178 */ |
| led-2 { |
| color = <LED_COLOR_ID_RED>; |
| default-state = "off"; |
| function = LED_FUNCTION_STATUS; |
| gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| /* LED_5_GREEN / MXM3_152 */ |
| led-3 { |
| color = <LED_COLOR_ID_GREEN>; |
| default-state = "off"; |
| function = LED_FUNCTION_STATUS; |
| gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| /* LED_5_RED / MXM3_156 */ |
| led-4 { |
| color = <LED_COLOR_ID_RED>; |
| default-state = "off"; |
| function = LED_FUNCTION_STATUS; |
| gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| reg_3v3_vmmc: regulator-3v3-vmmc { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; |
| /* MMC1_PWR_CTRL */ |
| gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| regulator-name = "3v3_vmmc"; |
| }; |
| |
| reg_can1_supply: regulator-can1-supply { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enable_can1_power>; |
| gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-name = "can1_supply"; |
| startup-delay-us = <1000>; |
| }; |
| |
| reg_can2_supply: regulator-can2-supply { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sata1_act>; |
| gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-name = "can2_supply"; |
| startup-delay-us = <1000>; |
| }; |
| |
| reg_usb_host_vbus: regulator-usb-host-vbus { |
| regulator-name = "VCC_USBH(2|4)"; |
| }; |
| }; |
| |
| &adc0 { |
| status = "okay"; |
| }; |
| |
| &adc1 { |
| status = "okay"; |
| }; |
| |
| /* TODO: Audio Mixer */ |
| |
| /* TODO: Asynchronous Sample Rate Converter (ASRC) */ |
| |
| /* TODO: Display Controller */ |
| |
| /* TODO: DPU */ |
| |
| /* Apalis ETH1 */ |
| &fec1 { |
| status = "okay"; |
| }; |
| |
| /* Apalis CAN1 */ |
| &flexcan1 { |
| xceiver-supply = <®_can1_supply>; |
| status = "okay"; |
| }; |
| |
| /* Apalis CAN2 */ |
| &flexcan2 { |
| xceiver-supply = <®_can2_supply>; |
| status = "okay"; |
| }; |
| |
| /* TODO: GPU */ |
| |
| /* Apalis I2C1 */ |
| &i2c2 { |
| status = "okay"; |
| |
| eeprom: eeprom@50 { |
| compatible = "atmel,24c02"; |
| reg = <0x50>; |
| pagesize = <16>; |
| }; |
| |
| /* M41T0M6 real time clock on carrier board */ |
| rtc_i2c: rtc@68 { |
| status = "okay"; |
| }; |
| }; |
| |
| /* Apalis I2C3 (CAM) */ |
| &i2c3 { |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>, |
| <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>, |
| <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>, |
| <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>, |
| <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>, |
| <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>, |
| <&pinctrl_qspi1a_gpios>, <&pinctrl_sim0_gpios>, |
| <&pinctrl_uart24_forceoff>, <&pinctrl_usdhc1_gpios>; |
| |
| /* PMIC MMC1 power-switch */ |
| pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp { |
| fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19 0x00000021>; /* MXM3_148, PMIC */ |
| }; |
| |
| /* FlexCAN PMIC */ |
| pinctrl_enable_can1_power: enablecan1powergrp { |
| fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021>; /* MXM3_158, PMIC */ |
| }; |
| |
| pinctrl_leds_ixora: ledsixoragrp { |
| fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27 0x06000061>, /* LED_4_GREEN */ |
| <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29 0x06000061>, /* LED_4_RED */ |
| <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20 0x06000061>, /* LED_5_GREEN */ |
| <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21 0x06000061>; /* LED_5_RED */ |
| }; |
| |
| pinctrl_uart24_forceoff: uart24forceoffgrp { |
| fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25 0x00000021>; |
| }; |
| }; |
| |
| /* Apalis SPI1 */ |
| &lpspi0 { |
| status = "okay"; |
| }; |
| |
| /* Apalis SPI2 */ |
| &lpspi2 { |
| status = "okay"; |
| }; |
| |
| /* Apalis UART3 */ |
| &lpuart0 { |
| status = "okay"; |
| }; |
| |
| /* Apalis UART1 */ |
| &lpuart1 { |
| status = "okay"; |
| }; |
| |
| /* Apalis UART4 */ |
| &lpuart2 { |
| status = "okay"; |
| }; |
| |
| /* Apalis UART2 */ |
| &lpuart3 { |
| status = "okay"; |
| }; |
| |
| &lsio_gpio5 { |
| gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03", |
| "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07", |
| "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11", |
| "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15", |
| "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19", |
| "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23", |
| "gpio5-24", "UART24-FORCEOFF", "gpio5-26", |
| "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30", |
| "gpio5-31"; |
| }; |
| |
| /* Apalis PWM3, MXM3 pin 6 */ |
| &lsio_pwm0 { |
| status = "okay"; |
| }; |
| |
| /* Apalis PWM4, MXM3 pin 8 */ |
| &lsio_pwm1 { |
| status = "okay"; |
| }; |
| |
| /* Apalis PWM1, MXM3 pin 2 */ |
| &lsio_pwm2 { |
| status = "okay"; |
| }; |
| |
| /* Apalis PWM2, MXM3 pin 4 */ |
| &lsio_pwm3 { |
| status = "okay"; |
| }; |
| |
| /* TODO: Apalis PCIE1 */ |
| |
| /* TODO: Apalis BKL1_PWM */ |
| |
| /* TODO: Apalis DAP1 */ |
| |
| /* TODO: Apalis Analogue Audio */ |
| |
| /* TODO: Apalis SATA1 */ |
| |
| /* TODO: Apalis SPDIF1 */ |
| |
| /* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ |
| |
| /* Apalis USBO1 */ |
| &usbotg1 { |
| status = "okay"; |
| }; |
| |
| /* TODO: Apalis USBH4 SuperSpeed */ |
| |
| /* Apalis MMC1 */ |
| &usdhc2 { |
| pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>; |
| pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>; |
| pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>; |
| pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>; |
| bus-width = <4>; |
| cap-power-off-card; |
| /delete-property/ no-1-8-v; |
| vmmc-supply = <®_3v3_vmmc>; |
| status = "okay"; |
| }; |