| // SPDX-License-Identifier: GPL-2.0 OR MIT |
| /* |
| * Copyright (C) 2022 StarFive Technology Co., Ltd. |
| * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> |
| */ |
| |
| /dts-v1/; |
| #include <dt-bindings/clock/starfive,jh7110-crg.h> |
| #include <dt-bindings/power/starfive,jh7110-pmu.h> |
| #include <dt-bindings/reset/starfive,jh7110-crg.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| compatible = "starfive,jh7110"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| S7_0: cpu@0 { |
| compatible = "sifive,s7", "riscv"; |
| reg = <0>; |
| device_type = "cpu"; |
| i-cache-block-size = <64>; |
| i-cache-sets = <64>; |
| i-cache-size = <16384>; |
| next-level-cache = <&ccache>; |
| riscv,isa = "rv64imac_zba_zbb"; |
| riscv,isa-base = "rv64i"; |
| riscv,isa-extensions = "i", "m", "a", "c", "zba", "zbb", "zicntr", "zicsr", |
| "zifencei", "zihpm"; |
| status = "disabled"; |
| |
| cpu0_intc: interrupt-controller { |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| U74_1: cpu@1 { |
| compatible = "sifive,u74-mc", "riscv"; |
| reg = <1>; |
| d-cache-block-size = <64>; |
| d-cache-sets = <64>; |
| d-cache-size = <32768>; |
| d-tlb-sets = <1>; |
| d-tlb-size = <40>; |
| device_type = "cpu"; |
| i-cache-block-size = <64>; |
| i-cache-sets = <64>; |
| i-cache-size = <32768>; |
| i-tlb-sets = <1>; |
| i-tlb-size = <40>; |
| mmu-type = "riscv,sv39"; |
| next-level-cache = <&ccache>; |
| riscv,isa = "rv64imafdc_zba_zbb"; |
| riscv,isa-base = "rv64i"; |
| riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zba", "zbb", "zicntr", |
| "zicsr", "zifencei", "zihpm"; |
| tlb-split; |
| operating-points-v2 = <&cpu_opp>; |
| clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; |
| clock-names = "cpu"; |
| #cooling-cells = <2>; |
| |
| cpu1_intc: interrupt-controller { |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| U74_2: cpu@2 { |
| compatible = "sifive,u74-mc", "riscv"; |
| reg = <2>; |
| d-cache-block-size = <64>; |
| d-cache-sets = <64>; |
| d-cache-size = <32768>; |
| d-tlb-sets = <1>; |
| d-tlb-size = <40>; |
| device_type = "cpu"; |
| i-cache-block-size = <64>; |
| i-cache-sets = <64>; |
| i-cache-size = <32768>; |
| i-tlb-sets = <1>; |
| i-tlb-size = <40>; |
| mmu-type = "riscv,sv39"; |
| next-level-cache = <&ccache>; |
| riscv,isa = "rv64imafdc_zba_zbb"; |
| riscv,isa-base = "rv64i"; |
| riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zba", "zbb", "zicntr", |
| "zicsr", "zifencei", "zihpm"; |
| tlb-split; |
| operating-points-v2 = <&cpu_opp>; |
| clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; |
| clock-names = "cpu"; |
| #cooling-cells = <2>; |
| |
| cpu2_intc: interrupt-controller { |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| U74_3: cpu@3 { |
| compatible = "sifive,u74-mc", "riscv"; |
| reg = <3>; |
| d-cache-block-size = <64>; |
| d-cache-sets = <64>; |
| d-cache-size = <32768>; |
| d-tlb-sets = <1>; |
| d-tlb-size = <40>; |
| device_type = "cpu"; |
| i-cache-block-size = <64>; |
| i-cache-sets = <64>; |
| i-cache-size = <32768>; |
| i-tlb-sets = <1>; |
| i-tlb-size = <40>; |
| mmu-type = "riscv,sv39"; |
| next-level-cache = <&ccache>; |
| riscv,isa = "rv64imafdc_zba_zbb"; |
| riscv,isa-base = "rv64i"; |
| riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zba", "zbb", "zicntr", |
| "zicsr", "zifencei", "zihpm"; |
| tlb-split; |
| operating-points-v2 = <&cpu_opp>; |
| clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; |
| clock-names = "cpu"; |
| #cooling-cells = <2>; |
| |
| cpu3_intc: interrupt-controller { |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| U74_4: cpu@4 { |
| compatible = "sifive,u74-mc", "riscv"; |
| reg = <4>; |
| d-cache-block-size = <64>; |
| d-cache-sets = <64>; |
| d-cache-size = <32768>; |
| d-tlb-sets = <1>; |
| d-tlb-size = <40>; |
| device_type = "cpu"; |
| i-cache-block-size = <64>; |
| i-cache-sets = <64>; |
| i-cache-size = <32768>; |
| i-tlb-sets = <1>; |
| i-tlb-size = <40>; |
| mmu-type = "riscv,sv39"; |
| next-level-cache = <&ccache>; |
| riscv,isa = "rv64imafdc_zba_zbb"; |
| riscv,isa-base = "rv64i"; |
| riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zba", "zbb", "zicntr", |
| "zicsr", "zifencei", "zihpm"; |
| tlb-split; |
| operating-points-v2 = <&cpu_opp>; |
| clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>; |
| clock-names = "cpu"; |
| #cooling-cells = <2>; |
| |
| cpu4_intc: interrupt-controller { |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&S7_0>; |
| }; |
| |
| core1 { |
| cpu = <&U74_1>; |
| }; |
| |
| core2 { |
| cpu = <&U74_2>; |
| }; |
| |
| core3 { |
| cpu = <&U74_3>; |
| }; |
| |
| core4 { |
| cpu = <&U74_4>; |
| }; |
| }; |
| }; |
| }; |
| |
| cpu_opp: opp-table-0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| opp-375000000 { |
| opp-hz = /bits/ 64 <375000000>; |
| opp-microvolt = <800000>; |
| }; |
| opp-500000000 { |
| opp-hz = /bits/ 64 <500000000>; |
| opp-microvolt = <800000>; |
| }; |
| opp-750000000 { |
| opp-hz = /bits/ 64 <750000000>; |
| opp-microvolt = <800000>; |
| }; |
| opp-1500000000 { |
| opp-hz = /bits/ 64 <1500000000>; |
| opp-microvolt = <1040000>; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <15000>; |
| |
| thermal-sensors = <&sfctemp>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert0>; |
| cooling-device = |
| <&U74_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&U74_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&U74_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&U74_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| cpu_alert0: cpu-alert0 { |
| /* milliCelsius */ |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu-crit { |
| /* milliCelsius */ |
| temperature = <100000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| dvp_clk: dvp-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "dvp_clk"; |
| #clock-cells = <0>; |
| }; |
| gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "gmac0_rgmii_rxin"; |
| #clock-cells = <0>; |
| }; |
| |
| gmac0_rmii_refin: gmac0-rmii-refin-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "gmac0_rmii_refin"; |
| #clock-cells = <0>; |
| }; |
| |
| gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "gmac1_rgmii_rxin"; |
| #clock-cells = <0>; |
| }; |
| |
| gmac1_rmii_refin: gmac1-rmii-refin-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "gmac1_rmii_refin"; |
| #clock-cells = <0>; |
| }; |
| |
| hdmitx0_pixelclk: hdmitx0-pixel-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "hdmitx0_pixelclk"; |
| #clock-cells = <0>; |
| }; |
| |
| i2srx_bclk_ext: i2srx-bclk-ext-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "i2srx_bclk_ext"; |
| #clock-cells = <0>; |
| }; |
| |
| i2srx_lrck_ext: i2srx-lrck-ext-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "i2srx_lrck_ext"; |
| #clock-cells = <0>; |
| }; |
| |
| i2stx_bclk_ext: i2stx-bclk-ext-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "i2stx_bclk_ext"; |
| #clock-cells = <0>; |
| }; |
| |
| i2stx_lrck_ext: i2stx-lrck-ext-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "i2stx_lrck_ext"; |
| #clock-cells = <0>; |
| }; |
| |
| mclk_ext: mclk-ext-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "mclk_ext"; |
| #clock-cells = <0>; |
| }; |
| |
| osc: oscillator { |
| compatible = "fixed-clock"; |
| clock-output-names = "osc"; |
| #clock-cells = <0>; |
| }; |
| |
| rtc_osc: rtc-oscillator { |
| compatible = "fixed-clock"; |
| clock-output-names = "rtc_osc"; |
| #clock-cells = <0>; |
| }; |
| |
| stmmac_axi_setup: stmmac-axi-config { |
| snps,lpi_en; |
| snps,wr_osr_lmt = <15>; |
| snps,rd_osr_lmt = <15>; |
| snps,blen = <256 128 64 32 0 0 0>; |
| }; |
| |
| tdm_ext: tdm-ext-clock { |
| compatible = "fixed-clock"; |
| clock-output-names = "tdm_ext"; |
| #clock-cells = <0>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| interrupt-parent = <&plic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| clint: timer@2000000 { |
| compatible = "starfive,jh7110-clint", "sifive,clint0"; |
| reg = <0x0 0x2000000 0x0 0x10000>; |
| interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, |
| <&cpu1_intc 3>, <&cpu1_intc 7>, |
| <&cpu2_intc 3>, <&cpu2_intc 7>, |
| <&cpu3_intc 3>, <&cpu3_intc 7>, |
| <&cpu4_intc 3>, <&cpu4_intc 7>; |
| }; |
| |
| ccache: cache-controller@2010000 { |
| compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache"; |
| reg = <0x0 0x2010000 0x0 0x4000>; |
| interrupts = <1>, <3>, <4>, <2>; |
| cache-block-size = <64>; |
| cache-level = <2>; |
| cache-sets = <2048>; |
| cache-size = <2097152>; |
| cache-unified; |
| }; |
| |
| plic: interrupt-controller@c000000 { |
| compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0"; |
| reg = <0x0 0xc000000 0x0 0x4000000>; |
| interrupts-extended = <&cpu0_intc 11>, |
| <&cpu1_intc 11>, <&cpu1_intc 9>, |
| <&cpu2_intc 11>, <&cpu2_intc 9>, |
| <&cpu3_intc 11>, <&cpu3_intc 9>, |
| <&cpu4_intc 11>, <&cpu4_intc 9>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| #address-cells = <0>; |
| riscv,ndev = <136>; |
| }; |
| |
| uart0: serial@10000000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x0 0x10000000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>, |
| <&syscrg JH7110_SYSCLK_UART0_APB>; |
| clock-names = "baudclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_UART0_APB>; |
| interrupts = <32>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@10010000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x0 0x10010000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>, |
| <&syscrg JH7110_SYSCLK_UART1_APB>; |
| clock-names = "baudclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_UART1_APB>; |
| interrupts = <33>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@10020000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x0 0x10020000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>, |
| <&syscrg JH7110_SYSCLK_UART2_APB>; |
| clock-names = "baudclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_UART2_APB>; |
| interrupts = <34>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@10030000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0x10030000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>; |
| clock-names = "ref"; |
| resets = <&syscrg JH7110_SYSRST_I2C0_APB>; |
| interrupts = <35>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@10040000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0x10040000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>; |
| clock-names = "ref"; |
| resets = <&syscrg JH7110_SYSRST_I2C1_APB>; |
| interrupts = <36>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@10050000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0x10050000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>; |
| clock-names = "ref"; |
| resets = <&syscrg JH7110_SYSRST_I2C2_APB>; |
| interrupts = <37>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@10060000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0x10060000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_SPI0_APB>, |
| <&syscrg JH7110_SYSCLK_SPI0_APB>; |
| clock-names = "sspclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_SPI0_APB>; |
| interrupts = <38>; |
| arm,primecell-periphid = <0x00041022>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@10070000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0x10070000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_SPI1_APB>, |
| <&syscrg JH7110_SYSCLK_SPI1_APB>; |
| clock-names = "sspclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_SPI1_APB>; |
| interrupts = <39>; |
| arm,primecell-periphid = <0x00041022>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@10080000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0x10080000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_SPI2_APB>, |
| <&syscrg JH7110_SYSCLK_SPI2_APB>; |
| clock-names = "sspclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_SPI2_APB>; |
| interrupts = <40>; |
| arm,primecell-periphid = <0x00041022>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| tdm: tdm@10090000 { |
| compatible = "starfive,jh7110-tdm"; |
| reg = <0x0 0x10090000 0x0 0x1000>; |
| clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>, |
| <&syscrg JH7110_SYSCLK_TDM_APB>, |
| <&syscrg JH7110_SYSCLK_TDM_INTERNAL>, |
| <&syscrg JH7110_SYSCLK_TDM_TDM>, |
| <&syscrg JH7110_SYSCLK_MCLK_INNER>, |
| <&tdm_ext>; |
| clock-names = "tdm_ahb", "tdm_apb", |
| "tdm_internal", "tdm", |
| "mclk_inner", "tdm_ext"; |
| resets = <&syscrg JH7110_SYSRST_TDM_AHB>, |
| <&syscrg JH7110_SYSRST_TDM_APB>, |
| <&syscrg JH7110_SYSRST_TDM_CORE>; |
| dmas = <&dma 20>, <&dma 21>; |
| dma-names = "rx","tx"; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2srx: i2s@100e0000 { |
| compatible = "starfive,jh7110-i2srx"; |
| reg = <0x0 0x100e0000 0x0 0x1000>; |
| clocks = <&syscrg JH7110_SYSCLK_I2SRX_BCLK_MST>, |
| <&syscrg JH7110_SYSCLK_I2SRX_APB>, |
| <&syscrg JH7110_SYSCLK_MCLK>, |
| <&syscrg JH7110_SYSCLK_MCLK_INNER>, |
| <&mclk_ext>, |
| <&syscrg JH7110_SYSCLK_I2SRX_BCLK>, |
| <&syscrg JH7110_SYSCLK_I2SRX_LRCK>, |
| <&i2srx_bclk_ext>, |
| <&i2srx_lrck_ext>; |
| clock-names = "i2sclk", "apb", "mclk", |
| "mclk_inner", "mclk_ext", "bclk", |
| "lrck", "bclk_ext", "lrck_ext"; |
| resets = <&syscrg JH7110_SYSRST_I2SRX_APB>, |
| <&syscrg JH7110_SYSRST_I2SRX_BCLK>; |
| dmas = <0>, <&dma 24>; |
| dma-names = "tx", "rx"; |
| starfive,syscon = <&sys_syscon 0x18 0x2>; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| pwmdac: pwmdac@100b0000 { |
| compatible = "starfive,jh7110-pwmdac"; |
| reg = <0x0 0x100b0000 0x0 0x1000>; |
| clocks = <&syscrg JH7110_SYSCLK_PWMDAC_APB>, |
| <&syscrg JH7110_SYSCLK_PWMDAC_CORE>; |
| clock-names = "apb", "core"; |
| resets = <&syscrg JH7110_SYSRST_PWMDAC_APB>; |
| dmas = <&dma 22>; |
| dma-names = "tx"; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| usb0: usb@10100000 { |
| compatible = "starfive,jh7110-usb"; |
| ranges = <0x0 0x0 0x10100000 0x100000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| starfive,stg-syscon = <&stg_syscon 0x4>; |
| clocks = <&stgcrg JH7110_STGCLK_USB0_LPM>, |
| <&stgcrg JH7110_STGCLK_USB0_STB>, |
| <&stgcrg JH7110_STGCLK_USB0_APB>, |
| <&stgcrg JH7110_STGCLK_USB0_AXI>, |
| <&stgcrg JH7110_STGCLK_USB0_UTMI_APB>; |
| clock-names = "lpm", "stb", "apb", "axi", "utmi_apb"; |
| resets = <&stgcrg JH7110_STGRST_USB0_PWRUP>, |
| <&stgcrg JH7110_STGRST_USB0_APB>, |
| <&stgcrg JH7110_STGRST_USB0_AXI>, |
| <&stgcrg JH7110_STGRST_USB0_UTMI_APB>; |
| reset-names = "pwrup", "apb", "axi", "utmi_apb"; |
| status = "disabled"; |
| |
| usb_cdns3: usb@0 { |
| compatible = "cdns,usb3"; |
| reg = <0x0 0x10000>, |
| <0x10000 0x10000>, |
| <0x20000 0x10000>; |
| reg-names = "otg", "xhci", "dev"; |
| interrupts = <100>, <108>, <110>; |
| interrupt-names = "host", "peripheral", "otg"; |
| phys = <&usbphy0>; |
| phy-names = "cdns3,usb2-phy"; |
| }; |
| }; |
| |
| usbphy0: phy@10200000 { |
| compatible = "starfive,jh7110-usb-phy"; |
| reg = <0x0 0x10200000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_USB_125M>, |
| <&stgcrg JH7110_STGCLK_USB0_APP_125>; |
| clock-names = "125m", "app_125m"; |
| #phy-cells = <0>; |
| }; |
| |
| pciephy0: phy@10210000 { |
| compatible = "starfive,jh7110-pcie-phy"; |
| reg = <0x0 0x10210000 0x0 0x10000>; |
| #phy-cells = <0>; |
| }; |
| |
| pciephy1: phy@10220000 { |
| compatible = "starfive,jh7110-pcie-phy"; |
| reg = <0x0 0x10220000 0x0 0x10000>; |
| #phy-cells = <0>; |
| }; |
| |
| stgcrg: clock-controller@10230000 { |
| compatible = "starfive,jh7110-stgcrg"; |
| reg = <0x0 0x10230000 0x0 0x10000>; |
| clocks = <&osc>, |
| <&syscrg JH7110_SYSCLK_HIFI4_CORE>, |
| <&syscrg JH7110_SYSCLK_STG_AXIAHB>, |
| <&syscrg JH7110_SYSCLK_USB_125M>, |
| <&syscrg JH7110_SYSCLK_CPU_BUS>, |
| <&syscrg JH7110_SYSCLK_HIFI4_AXI>, |
| <&syscrg JH7110_SYSCLK_NOCSTG_BUS>, |
| <&syscrg JH7110_SYSCLK_APB_BUS>; |
| clock-names = "osc", "hifi4_core", |
| "stg_axiahb", "usb_125m", |
| "cpu_bus", "hifi4_axi", |
| "nocstg_bus", "apb_bus"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| stg_syscon: syscon@10240000 { |
| compatible = "starfive,jh7110-stg-syscon", "syscon"; |
| reg = <0x0 0x10240000 0x0 0x1000>; |
| }; |
| |
| uart3: serial@12000000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x0 0x12000000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>, |
| <&syscrg JH7110_SYSCLK_UART3_APB>; |
| clock-names = "baudclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_UART3_APB>; |
| interrupts = <45>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@12010000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x0 0x12010000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>, |
| <&syscrg JH7110_SYSCLK_UART4_APB>; |
| clock-names = "baudclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_UART4_APB>; |
| interrupts = <46>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@12020000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x0 0x12020000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>, |
| <&syscrg JH7110_SYSCLK_UART5_APB>; |
| clock-names = "baudclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_UART5_APB>; |
| interrupts = <47>; |
| reg-io-width = <4>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@12030000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0x12030000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>; |
| clock-names = "ref"; |
| resets = <&syscrg JH7110_SYSRST_I2C3_APB>; |
| interrupts = <48>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@12040000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0x12040000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>; |
| clock-names = "ref"; |
| resets = <&syscrg JH7110_SYSRST_I2C4_APB>; |
| interrupts = <49>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@12050000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0x12050000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>; |
| clock-names = "ref"; |
| resets = <&syscrg JH7110_SYSRST_I2C5_APB>; |
| interrupts = <50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@12060000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0x12060000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>; |
| clock-names = "ref"; |
| resets = <&syscrg JH7110_SYSRST_I2C6_APB>; |
| interrupts = <51>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@12070000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0x12070000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_SPI3_APB>, |
| <&syscrg JH7110_SYSCLK_SPI3_APB>; |
| clock-names = "sspclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_SPI3_APB>; |
| interrupts = <52>; |
| arm,primecell-periphid = <0x00041022>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@12080000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0x12080000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_SPI4_APB>, |
| <&syscrg JH7110_SYSCLK_SPI4_APB>; |
| clock-names = "sspclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_SPI4_APB>; |
| interrupts = <53>; |
| arm,primecell-periphid = <0x00041022>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi5: spi@12090000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0x12090000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_SPI5_APB>, |
| <&syscrg JH7110_SYSCLK_SPI5_APB>; |
| clock-names = "sspclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_SPI5_APB>; |
| interrupts = <54>; |
| arm,primecell-periphid = <0x00041022>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi6: spi@120a0000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0x120A0000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_SPI6_APB>, |
| <&syscrg JH7110_SYSCLK_SPI6_APB>; |
| clock-names = "sspclk", "apb_pclk"; |
| resets = <&syscrg JH7110_SYSRST_SPI6_APB>; |
| interrupts = <55>; |
| arm,primecell-periphid = <0x00041022>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2stx0: i2s@120b0000 { |
| compatible = "starfive,jh7110-i2stx0"; |
| reg = <0x0 0x120b0000 0x0 0x1000>; |
| clocks = <&syscrg JH7110_SYSCLK_I2STX0_BCLK_MST>, |
| <&syscrg JH7110_SYSCLK_I2STX0_APB>, |
| <&syscrg JH7110_SYSCLK_MCLK>, |
| <&syscrg JH7110_SYSCLK_MCLK_INNER>, |
| <&mclk_ext>; |
| clock-names = "i2sclk", "apb", "mclk", |
| "mclk_inner","mclk_ext"; |
| resets = <&syscrg JH7110_SYSRST_I2STX0_APB>, |
| <&syscrg JH7110_SYSRST_I2STX0_BCLK>; |
| dmas = <&dma 47>; |
| dma-names = "tx"; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2stx1: i2s@120c0000 { |
| compatible = "starfive,jh7110-i2stx1"; |
| reg = <0x0 0x120c0000 0x0 0x1000>; |
| clocks = <&syscrg JH7110_SYSCLK_I2STX1_BCLK_MST>, |
| <&syscrg JH7110_SYSCLK_I2STX1_APB>, |
| <&syscrg JH7110_SYSCLK_MCLK>, |
| <&syscrg JH7110_SYSCLK_MCLK_INNER>, |
| <&mclk_ext>, |
| <&syscrg JH7110_SYSCLK_I2STX1_BCLK>, |
| <&syscrg JH7110_SYSCLK_I2STX1_LRCK>, |
| <&i2stx_bclk_ext>, |
| <&i2stx_lrck_ext>; |
| clock-names = "i2sclk", "apb", "mclk", |
| "mclk_inner", "mclk_ext", "bclk", |
| "lrck", "bclk_ext", "lrck_ext"; |
| resets = <&syscrg JH7110_SYSRST_I2STX1_APB>, |
| <&syscrg JH7110_SYSRST_I2STX1_BCLK>; |
| dmas = <&dma 48>; |
| dma-names = "tx"; |
| #sound-dai-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sfctemp: temperature-sensor@120e0000 { |
| compatible = "starfive,jh7110-temp"; |
| reg = <0x0 0x120e0000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_TEMP_CORE>, |
| <&syscrg JH7110_SYSCLK_TEMP_APB>; |
| clock-names = "sense", "bus"; |
| resets = <&syscrg JH7110_SYSRST_TEMP_CORE>, |
| <&syscrg JH7110_SYSRST_TEMP_APB>; |
| reset-names = "sense", "bus"; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| qspi: spi@13010000 { |
| compatible = "starfive,jh7110-qspi", "cdns,qspi-nor"; |
| reg = <0x0 0x13010000 0x0 0x10000>, |
| <0x0 0x21000000 0x0 0x400000>; |
| interrupts = <25>; |
| clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>, |
| <&syscrg JH7110_SYSCLK_QSPI_AHB>, |
| <&syscrg JH7110_SYSCLK_QSPI_APB>; |
| clock-names = "ref", "ahb", "apb"; |
| resets = <&syscrg JH7110_SYSRST_QSPI_APB>, |
| <&syscrg JH7110_SYSRST_QSPI_AHB>, |
| <&syscrg JH7110_SYSRST_QSPI_REF>; |
| reset-names = "qspi", "qspi-ocp", "rstc_ref"; |
| cdns,fifo-depth = <256>; |
| cdns,fifo-width = <4>; |
| cdns,trigger-address = <0x0>; |
| status = "disabled"; |
| }; |
| |
| syscrg: clock-controller@13020000 { |
| compatible = "starfive,jh7110-syscrg"; |
| reg = <0x0 0x13020000 0x0 0x10000>; |
| clocks = <&osc>, <&gmac1_rmii_refin>, |
| <&gmac1_rgmii_rxin>, |
| <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, |
| <&i2srx_bclk_ext>, <&i2srx_lrck_ext>, |
| <&tdm_ext>, <&mclk_ext>, |
| <&pllclk JH7110_PLLCLK_PLL0_OUT>, |
| <&pllclk JH7110_PLLCLK_PLL1_OUT>, |
| <&pllclk JH7110_PLLCLK_PLL2_OUT>; |
| clock-names = "osc", "gmac1_rmii_refin", |
| "gmac1_rgmii_rxin", |
| "i2stx_bclk_ext", "i2stx_lrck_ext", |
| "i2srx_bclk_ext", "i2srx_lrck_ext", |
| "tdm_ext", "mclk_ext", |
| "pll0_out", "pll1_out", "pll2_out"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| sys_syscon: syscon@13030000 { |
| compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd"; |
| reg = <0x0 0x13030000 0x0 0x1000>; |
| |
| pllclk: clock-controller { |
| compatible = "starfive,jh7110-pll"; |
| clocks = <&osc>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| sysgpio: pinctrl@13040000 { |
| compatible = "starfive,jh7110-sys-pinctrl"; |
| reg = <0x0 0x13040000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>; |
| resets = <&syscrg JH7110_SYSRST_IOMUX_APB>; |
| interrupts = <86>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| watchdog@13070000 { |
| compatible = "starfive,jh7110-wdt"; |
| reg = <0x0 0x13070000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_WDT_APB>, |
| <&syscrg JH7110_SYSCLK_WDT_CORE>; |
| clock-names = "apb", "core"; |
| resets = <&syscrg JH7110_SYSRST_WDT_APB>, |
| <&syscrg JH7110_SYSRST_WDT_CORE>; |
| }; |
| |
| crypto: crypto@16000000 { |
| compatible = "starfive,jh7110-crypto"; |
| reg = <0x0 0x16000000 0x0 0x4000>; |
| clocks = <&stgcrg JH7110_STGCLK_SEC_AHB>, |
| <&stgcrg JH7110_STGCLK_SEC_MISC_AHB>; |
| clock-names = "hclk", "ahb"; |
| interrupts = <28>; |
| resets = <&stgcrg JH7110_STGRST_SEC_AHB>; |
| dmas = <&sdma 1 2>, <&sdma 0 2>; |
| dma-names = "tx", "rx"; |
| }; |
| |
| sdma: dma-controller@16008000 { |
| compatible = "arm,pl080", "arm,primecell"; |
| arm,primecell-periphid = <0x00041080>; |
| reg = <0x0 0x16008000 0x0 0x4000>; |
| interrupts = <29>; |
| clocks = <&stgcrg JH7110_STGCLK_SEC_AHB>; |
| clock-names = "apb_pclk"; |
| resets = <&stgcrg JH7110_STGRST_SEC_AHB>; |
| lli-bus-interface-ahb1; |
| mem-bus-interface-ahb1; |
| memcpy-burst-size = <256>; |
| memcpy-bus-width = <32>; |
| #dma-cells = <2>; |
| }; |
| |
| rng: rng@1600c000 { |
| compatible = "starfive,jh7110-trng"; |
| reg = <0x0 0x1600C000 0x0 0x4000>; |
| clocks = <&stgcrg JH7110_STGCLK_SEC_AHB>, |
| <&stgcrg JH7110_STGCLK_SEC_MISC_AHB>; |
| clock-names = "hclk", "ahb"; |
| resets = <&stgcrg JH7110_STGRST_SEC_AHB>; |
| interrupts = <30>; |
| }; |
| |
| mmc0: mmc@16010000 { |
| compatible = "starfive,jh7110-mmc"; |
| reg = <0x0 0x16010000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_SDIO0_AHB>, |
| <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; |
| clock-names = "biu","ciu"; |
| resets = <&syscrg JH7110_SYSRST_SDIO0_AHB>; |
| reset-names = "reset"; |
| interrupts = <74>; |
| fifo-depth = <32>; |
| fifo-watermark-aligned; |
| data-addr = <0>; |
| starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>; |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@16020000 { |
| compatible = "starfive,jh7110-mmc"; |
| reg = <0x0 0x16020000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_SDIO1_AHB>, |
| <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; |
| clock-names = "biu","ciu"; |
| resets = <&syscrg JH7110_SYSRST_SDIO1_AHB>; |
| reset-names = "reset"; |
| interrupts = <75>; |
| fifo-depth = <32>; |
| fifo-watermark-aligned; |
| data-addr = <0>; |
| starfive,sysreg = <&sys_syscon 0x9c 0x1 0x3e>; |
| status = "disabled"; |
| }; |
| |
| gmac0: ethernet@16030000 { |
| compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; |
| reg = <0x0 0x16030000 0x0 0x10000>; |
| clocks = <&aoncrg JH7110_AONCLK_GMAC0_AXI>, |
| <&aoncrg JH7110_AONCLK_GMAC0_AHB>, |
| <&syscrg JH7110_SYSCLK_GMAC0_PTP>, |
| <&aoncrg JH7110_AONCLK_GMAC0_TX_INV>, |
| <&syscrg JH7110_SYSCLK_GMAC0_GTXC>; |
| clock-names = "stmmaceth", "pclk", "ptp_ref", |
| "tx", "gtx"; |
| resets = <&aoncrg JH7110_AONRST_GMAC0_AXI>, |
| <&aoncrg JH7110_AONRST_GMAC0_AHB>; |
| reset-names = "stmmaceth", "ahb"; |
| interrupts = <7>, <6>, <5>; |
| interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; |
| rx-fifo-depth = <2048>; |
| tx-fifo-depth = <2048>; |
| snps,multicast-filter-bins = <64>; |
| snps,perfect-filter-entries = <256>; |
| snps,fixed-burst; |
| snps,no-pbl-x8; |
| snps,force_thresh_dma_mode; |
| snps,axi-config = <&stmmac_axi_setup>; |
| snps,tso; |
| snps,en-tx-lpi-clockgating; |
| snps,txpbl = <16>; |
| snps,rxpbl = <16>; |
| starfive,syscon = <&aon_syscon 0xc 0x12>; |
| status = "disabled"; |
| }; |
| |
| gmac1: ethernet@16040000 { |
| compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; |
| reg = <0x0 0x16040000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_GMAC1_AXI>, |
| <&syscrg JH7110_SYSCLK_GMAC1_AHB>, |
| <&syscrg JH7110_SYSCLK_GMAC1_PTP>, |
| <&syscrg JH7110_SYSCLK_GMAC1_TX_INV>, |
| <&syscrg JH7110_SYSCLK_GMAC1_GTXC>; |
| clock-names = "stmmaceth", "pclk", "ptp_ref", |
| "tx", "gtx"; |
| resets = <&syscrg JH7110_SYSRST_GMAC1_AXI>, |
| <&syscrg JH7110_SYSRST_GMAC1_AHB>; |
| reset-names = "stmmaceth", "ahb"; |
| interrupts = <78>, <77>, <76>; |
| interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; |
| rx-fifo-depth = <2048>; |
| tx-fifo-depth = <2048>; |
| snps,multicast-filter-bins = <64>; |
| snps,perfect-filter-entries = <256>; |
| snps,fixed-burst; |
| snps,no-pbl-x8; |
| snps,force_thresh_dma_mode; |
| snps,axi-config = <&stmmac_axi_setup>; |
| snps,tso; |
| snps,en-tx-lpi-clockgating; |
| snps,txpbl = <16>; |
| snps,rxpbl = <16>; |
| starfive,syscon = <&sys_syscon 0x90 0x2>; |
| status = "disabled"; |
| }; |
| |
| dma: dma-controller@16050000 { |
| compatible = "starfive,jh7110-axi-dma"; |
| reg = <0x0 0x16050000 0x0 0x10000>; |
| clocks = <&stgcrg JH7110_STGCLK_DMA1P_AXI>, |
| <&stgcrg JH7110_STGCLK_DMA1P_AHB>; |
| clock-names = "core-clk", "cfgr-clk"; |
| resets = <&stgcrg JH7110_STGRST_DMA1P_AXI>, |
| <&stgcrg JH7110_STGRST_DMA1P_AHB>; |
| interrupts = <73>; |
| #dma-cells = <1>; |
| dma-channels = <4>; |
| snps,dma-masters = <1>; |
| snps,data-width = <3>; |
| snps,block-size = <65536 65536 65536 65536>; |
| snps,priority = <0 1 2 3>; |
| snps,axi-max-burst-len = <16>; |
| }; |
| |
| aoncrg: clock-controller@17000000 { |
| compatible = "starfive,jh7110-aoncrg"; |
| reg = <0x0 0x17000000 0x0 0x10000>; |
| clocks = <&osc>, <&gmac0_rmii_refin>, |
| <&gmac0_rgmii_rxin>, |
| <&syscrg JH7110_SYSCLK_STG_AXIAHB>, |
| <&syscrg JH7110_SYSCLK_APB_BUS>, |
| <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>, |
| <&rtc_osc>; |
| clock-names = "osc", "gmac0_rmii_refin", |
| "gmac0_rgmii_rxin", "stg_axiahb", |
| "apb_bus", "gmac0_gtxclk", |
| "rtc_osc"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| aon_syscon: syscon@17010000 { |
| compatible = "starfive,jh7110-aon-syscon", "syscon"; |
| reg = <0x0 0x17010000 0x0 0x1000>; |
| #power-domain-cells = <1>; |
| }; |
| |
| aongpio: pinctrl@17020000 { |
| compatible = "starfive,jh7110-aon-pinctrl"; |
| reg = <0x0 0x17020000 0x0 0x10000>; |
| resets = <&aoncrg JH7110_AONRST_IOMUX>; |
| interrupts = <85>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| pwrc: power-controller@17030000 { |
| compatible = "starfive,jh7110-pmu"; |
| reg = <0x0 0x17030000 0x0 0x10000>; |
| interrupts = <111>; |
| #power-domain-cells = <1>; |
| }; |
| |
| ispcrg: clock-controller@19810000 { |
| compatible = "starfive,jh7110-ispcrg"; |
| reg = <0x0 0x19810000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>, |
| <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>, |
| <&syscrg JH7110_SYSCLK_NOC_BUS_ISP_AXI>, |
| <&dvp_clk>; |
| clock-names = "isp_top_core", "isp_top_axi", |
| "noc_bus_isp_axi", "dvp_clk"; |
| resets = <&syscrg JH7110_SYSRST_ISP_TOP>, |
| <&syscrg JH7110_SYSRST_ISP_TOP_AXI>, |
| <&syscrg JH7110_SYSRST_NOC_BUS_ISP_AXI>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| power-domains = <&pwrc JH7110_PD_ISP>; |
| }; |
| |
| voutcrg: clock-controller@295c0000 { |
| compatible = "starfive,jh7110-voutcrg"; |
| reg = <0x0 0x295c0000 0x0 0x10000>; |
| clocks = <&syscrg JH7110_SYSCLK_VOUT_SRC>, |
| <&syscrg JH7110_SYSCLK_VOUT_TOP_AHB>, |
| <&syscrg JH7110_SYSCLK_VOUT_TOP_AXI>, |
| <&syscrg JH7110_SYSCLK_VOUT_TOP_HDMITX0_MCLK>, |
| <&syscrg JH7110_SYSCLK_I2STX0_BCLK>, |
| <&hdmitx0_pixelclk>; |
| clock-names = "vout_src", "vout_top_ahb", |
| "vout_top_axi", "vout_top_hdmitx0_mclk", |
| "i2stx0_bclk", "hdmitx0_pixelclk"; |
| resets = <&syscrg JH7110_SYSRST_VOUT_TOP_SRC>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| power-domains = <&pwrc JH7110_PD_VOUT>; |
| }; |
| }; |
| }; |
