blob: 38532d840f2a369619711ddf035ae0ed93a600e2 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
#
# Magnetometer sensors
#
# When adding new entries keep the list in alphabetical order
menu "Magnetometer sensors"
config AK8974
tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
depends on I2C
select REGMAP_I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Asahi Kasei AK8974, AMI305 or
AMI306 I2C-based 3-axis magnetometer chips.
To compile this driver as a module, choose M here: the module
will be called ak8974.
config AK8975
tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
depends on I2C
depends on GPIOLIB || COMPILE_TEST
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Asahi Kasei AK8975, AK8963,
AK09911, AK09912 or AK09916 3-Axis Magnetometer.
To compile this driver as a module, choose M here: the module
will be called ak8975.
config AK09911
tristate "Asahi Kasei AK09911 3-axis Compass"
depends on I2C
depends on GPIOLIB || COMPILE_TEST
select AK8975
help
Deprecated: AK09911 is now supported by AK8975 driver.
config BMC150_MAGN
tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
config BMC150_MAGN_I2C
tristate "Bosch BMC150 I2C Magnetometer Driver"
depends on I2C
select BMC150_MAGN
select REGMAP_I2C
help
Say yes here to build support for the BMC150 magnetometer with
I2C interface.
This is a combo module with both accelerometer and magnetometer.
This driver is only implementing magnetometer part, which has
its own address and register map.
This driver also supports I2C Bosch BMC156 and BMM150 chips.
To compile this driver as a module, choose M here: the module will be
called bmc150_magn_i2c.
config BMC150_MAGN_SPI
tristate "Bosch BMC150 SPI Magnetometer Driver"
depends on SPI
select BMC150_MAGN
select REGMAP_SPI
help
Say yes here to build support for the BMC150 magnetometer with
SPI interface.
This is a combo module with both accelerometer and magnetometer.
This driver is only implementing magnetometer part, which has
its own address and register map.
This driver also supports SPI Bosch BMC156 and BMM150 chips.
To compile this driver as a module, choose M here: the module will be
called bmc150_magn_spi.
config MAG3110
tristate "Freescale MAG3110 3-Axis Magnetometer"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the Freescale MAG3110 3-Axis
magnetometer.
To compile this driver as a module, choose M here: the module
will be called mag3110.
config HID_SENSOR_MAGNETOMETER_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Magenetometer 3D"
help
Say yes here to build support for the HID SENSOR
Magnetometer 3D.
config MMC35240
tristate "MEMSIC MMC35240 3-axis magnetic sensor"
select REGMAP_I2C
depends on I2C
help
Say yes here to build support for the MEMSIC MMC35240 3-axis
magnetic sensor.
To compile this driver as a module, choose M here: the module
will be called mmc35240.
config IIO_ST_MAGN_3AXIS
tristate "STMicroelectronics magnetometers 3-Axis Driver"
depends on (I2C || SPI_MASTER) && SYSFS
select IIO_ST_SENSORS_CORE
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics magnetometers:
LSM303C, LSM303DLHC, LSM303DLM, LIS3MDL.
Also need to enable at least one of I2C and SPI interface drivers
below.
config IIO_ST_MAGN_I2C_3AXIS
tristate "STMicroelectronics magnetometers 3-Axis I2C Interface"
depends on I2C && IIO_ST_MAGN_3AXIS
default I2C && IIO_ST_MAGN_3AXIS
select IIO_ST_SENSORS_I2C
help
Build support for STMicroelectronics magnetometers I2C interface.
To compile this driver as a module, choose M here. The module
will be called st_magn_i2c.
config IIO_ST_MAGN_SPI_3AXIS
tristate "STMicroelectronics magnetometers 3-Axis SPI Interface"
depends on SPI_MASTER && IIO_ST_MAGN_3AXIS
default SPI_MASTER && IIO_ST_MAGN_3AXIS
select IIO_ST_SENSORS_SPI
help
Build support for STMicroelectronics magnetometers SPI interface.
To compile this driver as a module, choose M here. The module
will be called st_magn_spi.
config SENSORS_HMC5843
tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
config SENSORS_HMC5843_I2C
tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)"
depends on I2C
select SENSORS_HMC5843
select REGMAP_I2C
help
Say Y here to add support for the Honeywell HMC5843, HMC5883 and
HMC5883L 3-Axis Magnetometer (digital compass).
This driver can also be compiled as a set of modules.
If so, these modules will be created:
- hmc5843_core (core functions)
- hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)
config SENSORS_HMC5843_SPI
tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)"
depends on SPI_MASTER
select SENSORS_HMC5843
select REGMAP_SPI
help
Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer
(digital compass).
This driver can also be compiled as a set of modules.
If so, these modules will be created:
- hmc5843_core (core functions)
- hmc5843_spi (support for HMC5983)
config SENSORS_RM3100
tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
config SENSORS_RM3100_I2C
tristate "PNI RM3100 3-Axis Magnetometer (I2C)"
depends on I2C
select SENSORS_RM3100
select REGMAP_I2C
help
Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
This driver can also be compiled as a module.
To compile this driver as a module, choose M here: the module
will be called rm3100-i2c.
config SENSORS_RM3100_SPI
tristate "PNI RM3100 3-Axis Magnetometer (SPI)"
depends on SPI_MASTER
select SENSORS_RM3100
select REGMAP_SPI
help
Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
This driver can also be compiled as a module.
To compile this driver as a module, choose M here: the module
will be called rm3100-spi.
config TI_TMAG5273
tristate "TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor"
depends on I2C
select REGMAP_I2C
help
Say Y here to add support for the TI TMAG5273 Low-Power
Linear 3D Hall-Effect Sensor.
This driver can also be compiled as a module.
To compile this driver as a module, choose M here: the module
will be called tmag5273.
config YAMAHA_YAS530
tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)"
depends on I2C
select REGMAP_I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here to add support for the Yamaha YAS530 series of
3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are
supported.
This driver can also be compiled as a module.
To compile this driver as a module, choose M here: the module
will be called yamaha-yas.
endmenu