blob: 4a6ba4dd2acdddae9e7069a7954d974a94e87f97 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2023 Analog Devices, Inc.
* ADI regulator driver for MAX77503.
*/
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/util_macros.h>
#define MAX77503_REG_CFG 0x00
#define MAX77503_REG_VOUT 0x01
#define MAX77503_BIT_EN BIT(0)
#define MAX77503_BIT_CURR_LIM BIT(3)
#define MAX77503_BIT_ADEN BIT(6)
#define MAX77503_BITS_SOFT_START GENMASK(5, 4)
#define MAX77503_BITS_MX_VOUT GENMASK(7, 0)
#define MAX77503_AD_ENABLED 0x1
#define MAX77503_AD_DISABLED 0x0
struct max77503_dev {
struct device *dev;
struct device_node *of_node;
struct regulator_desc desc;
struct regulator_dev *rdev;
struct regmap *regmap;
};
static const struct regmap_config max77503_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0x2,
};
static const struct regulator_ops max77503_buck_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_ascend,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
.set_current_limit = regulator_set_current_limit_regmap,
.set_active_discharge = regulator_set_active_discharge_regmap,
.set_soft_start = regulator_set_soft_start_regmap,
};
static const struct linear_range max77503_buck_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0x00, 0x54, 50000)
};
static const unsigned int max77503_current_limit_table[] = {
500000, 2000000
};
static const struct regulator_desc max77503_regulators_desc = {
.name = "max77503",
.enable_reg = MAX77503_REG_CFG,
.enable_mask = MAX77503_BIT_EN,
.ops = &max77503_buck_ops,
.type = REGULATOR_VOLTAGE,
.linear_ranges = max77503_buck_ranges,
.n_linear_ranges = ARRAY_SIZE(max77503_buck_ranges),
.vsel_reg = MAX77503_REG_VOUT,
.vsel_mask = MAX77503_BITS_MX_VOUT,
.soft_start_reg = MAX77503_REG_CFG,
.soft_start_mask = MAX77503_BITS_SOFT_START,
.active_discharge_reg = MAX77503_REG_CFG,
.active_discharge_mask = MAX77503_BIT_ADEN,
.active_discharge_off = MAX77503_AD_DISABLED,
.active_discharge_on = MAX77503_AD_ENABLED,
.csel_reg = MAX77503_REG_CFG,
.csel_mask = MAX77503_BIT_CURR_LIM,
.curr_table = max77503_current_limit_table,
.n_current_limits = ARRAY_SIZE(max77503_current_limit_table),
.owner = THIS_MODULE,
};
static int max77503_regulator_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct regulator_config config = {};
struct regulator_dev *rdev;
config.dev = dev;
config.of_node = dev->of_node;
config.regmap = devm_regmap_init_i2c(client, &max77503_regmap_config);
if (IS_ERR(config.regmap)) {
dev_err(dev, "Failed to init regmap");
return PTR_ERR(config.regmap);
}
rdev = devm_regulator_register(dev, &max77503_regulators_desc, &config);
if (IS_ERR(rdev)) {
dev_err(dev, "Failed to register regulator MAX77503");
return PTR_ERR(rdev);
}
return 0;
}
static const struct of_device_id of_max77503_match_tbl[] = {
{ .compatible = "adi,max77503", },
{ }
};
MODULE_DEVICE_TABLE(of, of_max77503_match_tbl);
static const struct i2c_device_id max77503_regulator_id[] = {
{"max77503"},
{ }
};
MODULE_DEVICE_TABLE(i2c, max77503_regulator_id);
static struct i2c_driver max77503_regulator_driver = {
.driver = {
.name = "max77503",
.of_match_table = of_max77503_match_tbl
},
.probe = max77503_regulator_probe,
.id_table = max77503_regulator_id,
};
module_i2c_driver(max77503_regulator_driver);
MODULE_AUTHOR("Gokhan Celik <Gokhan.Celik@analog.com>");
MODULE_DESCRIPTION("MAX77503 regulator driver");
MODULE_LICENSE("GPL");