blob: 90a587bc29b74e533212f41e1a25fcda9655d68f [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* dwc3-am62.c - TI specific Glue layer for AM62 DWC3 USB Controller
*
* Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/regmap.h>
#include <linux/pinctrl/consumer.h>
#include "core.h"
/* USB WRAPPER register offsets */
#define USBSS_PID 0x0
#define USBSS_OVERCURRENT_CTRL 0x4
#define USBSS_PHY_CONFIG 0x8
#define USBSS_PHY_TEST 0xc
#define USBSS_CORE_STAT 0x14
#define USBSS_HOST_VBUS_CTRL 0x18
#define USBSS_MODE_CONTROL 0x1c
#define USBSS_WAKEUP_CONFIG 0x30
#define USBSS_WAKEUP_STAT 0x34
#define USBSS_OVERRIDE_CONFIG 0x38
#define USBSS_IRQ_MISC_STATUS_RAW 0x430
#define USBSS_IRQ_MISC_STATUS 0x434
#define USBSS_IRQ_MISC_ENABLE_SET 0x438
#define USBSS_IRQ_MISC_ENABLE_CLR 0x43c
#define USBSS_IRQ_MISC_EOI 0x440
#define USBSS_INTR_TEST 0x490
#define USBSS_VBUS_FILTER 0x614
#define USBSS_VBUS_STAT 0x618
#define USBSS_DEBUG_CFG 0x708
#define USBSS_DEBUG_DATA 0x70c
#define USBSS_HOST_HUB_CTRL 0x714
/* PHY CONFIG register bits */
#define USBSS_PHY_VBUS_SEL_MASK GENMASK(2, 1)
#define USBSS_PHY_VBUS_SEL_SHIFT 1
#define USBSS_PHY_LANE_REVERSE BIT(0)
/* CORE STAT register bits */
#define USBSS_CORE_OPERATIONAL_MODE_MASK GENMASK(13, 12)
#define USBSS_CORE_OPERATIONAL_MODE_SHIFT 12
/* MODE CONTROL register bits */
#define USBSS_MODE_VALID BIT(0)
/* WAKEUP CONFIG register bits */
#define USBSS_WAKEUP_CFG_OVERCURRENT_EN BIT(3)
#define USBSS_WAKEUP_CFG_LINESTATE_EN BIT(2)
#define USBSS_WAKEUP_CFG_SESSVALID_EN BIT(1)
#define USBSS_WAKEUP_CFG_VBUSVALID_EN BIT(0)
#define USBSS_WAKEUP_CFG_ALL (USBSS_WAKEUP_CFG_VBUSVALID_EN | \
USBSS_WAKEUP_CFG_SESSVALID_EN | \
USBSS_WAKEUP_CFG_LINESTATE_EN | \
USBSS_WAKEUP_CFG_OVERCURRENT_EN)
#define USBSS_WAKEUP_CFG_NONE 0
/* WAKEUP STAT register bits */
#define USBSS_WAKEUP_STAT_OVERCURRENT BIT(4)
#define USBSS_WAKEUP_STAT_LINESTATE BIT(3)
#define USBSS_WAKEUP_STAT_SESSVALID BIT(2)
#define USBSS_WAKEUP_STAT_VBUSVALID BIT(1)
#define USBSS_WAKEUP_STAT_CLR BIT(0)
/* IRQ_MISC_STATUS_RAW register bits */
#define USBSS_IRQ_MISC_RAW_VBUSVALID BIT(22)
#define USBSS_IRQ_MISC_RAW_SESSVALID BIT(20)
/* IRQ_MISC_STATUS register bits */
#define USBSS_IRQ_MISC_VBUSVALID BIT(22)
#define USBSS_IRQ_MISC_SESSVALID BIT(20)
/* IRQ_MISC_ENABLE_SET register bits */
#define USBSS_IRQ_MISC_ENABLE_SET_VBUSVALID BIT(22)
#define USBSS_IRQ_MISC_ENABLE_SET_SESSVALID BIT(20)
/* IRQ_MISC_ENABLE_CLR register bits */
#define USBSS_IRQ_MISC_ENABLE_CLR_VBUSVALID BIT(22)
#define USBSS_IRQ_MISC_ENABLE_CLR_SESSVALID BIT(20)
/* IRQ_MISC_EOI register bits */
#define USBSS_IRQ_MISC_EOI_VECTOR BIT(0)
/* VBUS_STAT register bits */
#define USBSS_VBUS_STAT_SESSVALID BIT(2)
#define USBSS_VBUS_STAT_VBUSVALID BIT(0)
/* Mask for PHY PLL REFCLK */
#define PHY_PLL_REFCLK_MASK GENMASK(3, 0)
#define DWC3_AM62_AUTOSUSPEND_DELAY 100
struct dwc3_am62 {
struct device *dev;
void __iomem *usbss;
struct clk *usb2_refclk;
int rate_code;
struct regmap *syscon;
unsigned int offset;
unsigned int vbus_divider;
u32 wakeup_stat;
};
static const int dwc3_ti_rate_table[] = { /* in KHZ */
9600,
10000,
12000,
19200,
20000,
24000,
25000,
26000,
38400,
40000,
58000,
50000,
52000,
};
static inline u32 dwc3_ti_readl(struct dwc3_am62 *am62, u32 offset)
{
return readl((am62->usbss) + offset);
}
static inline void dwc3_ti_writel(struct dwc3_am62 *am62, u32 offset, u32 value)
{
writel(value, (am62->usbss) + offset);
}
static int phy_syscon_pll_refclk(struct dwc3_am62 *am62)
{
struct device *dev = am62->dev;
struct device_node *node = dev->of_node;
struct of_phandle_args args;
struct regmap *syscon;
int ret;
syscon = syscon_regmap_lookup_by_phandle(node, "ti,syscon-phy-pll-refclk");
if (IS_ERR(syscon)) {
dev_err(dev, "unable to get ti,syscon-phy-pll-refclk regmap\n");
return PTR_ERR(syscon);
}
am62->syscon = syscon;
ret = of_parse_phandle_with_fixed_args(node, "ti,syscon-phy-pll-refclk", 1,
0, &args);
if (ret)
return ret;
am62->offset = args.args[0];
ret = regmap_update_bits(am62->syscon, am62->offset, PHY_PLL_REFCLK_MASK, am62->rate_code);
if (ret) {
dev_err(dev, "failed to set phy pll reference clock rate\n");
return ret;
}
return 0;
}
static int dwc3_ti_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = pdev->dev.of_node;
struct dwc3_am62 *am62;
int i, ret;
unsigned long rate;
u32 reg;
am62 = devm_kzalloc(dev, sizeof(*am62), GFP_KERNEL);
if (!am62)
return -ENOMEM;
am62->dev = dev;
platform_set_drvdata(pdev, am62);
am62->usbss = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(am62->usbss)) {
dev_err(dev, "can't map IOMEM resource\n");
return PTR_ERR(am62->usbss);
}
am62->usb2_refclk = devm_clk_get(dev, "ref");
if (IS_ERR(am62->usb2_refclk)) {
dev_err(dev, "can't get usb2_refclk\n");
return PTR_ERR(am62->usb2_refclk);
}
/* Calculate the rate code */
rate = clk_get_rate(am62->usb2_refclk);
rate /= 1000; // To KHz
for (i = 0; i < ARRAY_SIZE(dwc3_ti_rate_table); i++) {
if (dwc3_ti_rate_table[i] == rate)
break;
}
if (i == ARRAY_SIZE(dwc3_ti_rate_table)) {
dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
return -EINVAL;
}
am62->rate_code = i;
/* Read the syscon property and set the rate code */
ret = phy_syscon_pll_refclk(am62);
if (ret)
return ret;
/* VBUS divider select */
am62->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider");
reg = dwc3_ti_readl(am62, USBSS_PHY_CONFIG);
if (am62->vbus_divider)
reg |= 1 << USBSS_PHY_VBUS_SEL_SHIFT;
dwc3_ti_writel(am62, USBSS_PHY_CONFIG, reg);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
/*
* Don't ignore its dependencies with its children
*/
pm_suspend_ignore_children(dev, false);
clk_prepare_enable(am62->usb2_refclk);
pm_runtime_get_noresume(dev);
ret = of_platform_populate(node, NULL, NULL, dev);
if (ret) {
dev_err(dev, "failed to create dwc3 core: %d\n", ret);
goto err_pm_disable;
}
/* Set mode valid bit to indicate role is valid */
reg = dwc3_ti_readl(am62, USBSS_MODE_CONTROL);
reg |= USBSS_MODE_VALID;
dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg);
/* Device has capability to wakeup system from sleep */
device_set_wakeup_capable(dev, true);
ret = device_wakeup_enable(dev);
if (ret)
dev_err(dev, "couldn't enable device as a wakeup source: %d\n", ret);
/* Setting up autosuspend */
pm_runtime_set_autosuspend_delay(dev, DWC3_AM62_AUTOSUSPEND_DELAY);
pm_runtime_use_autosuspend(dev);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
return 0;
err_pm_disable:
clk_disable_unprepare(am62->usb2_refclk);
pm_runtime_disable(dev);
pm_runtime_set_suspended(dev);
return ret;
}
static int dwc3_ti_remove_core(struct device *dev, void *c)
{
struct platform_device *pdev = to_platform_device(dev);
platform_device_unregister(pdev);
return 0;
}
static void dwc3_ti_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct dwc3_am62 *am62 = platform_get_drvdata(pdev);
u32 reg;
device_for_each_child(dev, NULL, dwc3_ti_remove_core);
/* Clear mode valid bit */
reg = dwc3_ti_readl(am62, USBSS_MODE_CONTROL);
reg &= ~USBSS_MODE_VALID;
dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg);
pm_runtime_put_sync(dev);
clk_disable_unprepare(am62->usb2_refclk);
pm_runtime_disable(dev);
pm_runtime_set_suspended(dev);
}
#ifdef CONFIG_PM
static int dwc3_ti_suspend_common(struct device *dev)
{
struct dwc3_am62 *am62 = dev_get_drvdata(dev);
u32 reg, current_prtcap_dir;
if (device_may_wakeup(dev)) {
reg = dwc3_ti_readl(am62, USBSS_CORE_STAT);
current_prtcap_dir = (reg & USBSS_CORE_OPERATIONAL_MODE_MASK)
>> USBSS_CORE_OPERATIONAL_MODE_SHIFT;
/* Set wakeup config enable bits */
reg = dwc3_ti_readl(am62, USBSS_WAKEUP_CONFIG);
if (current_prtcap_dir == DWC3_GCTL_PRTCAP_HOST) {
reg = USBSS_WAKEUP_CFG_LINESTATE_EN | USBSS_WAKEUP_CFG_OVERCURRENT_EN;
} else {
reg = USBSS_WAKEUP_CFG_VBUSVALID_EN | USBSS_WAKEUP_CFG_SESSVALID_EN;
/*
* Enable LINESTATE wake up only if connected to bus
* and in U2/L3 state else it causes spurious wake-up.
*/
}
dwc3_ti_writel(am62, USBSS_WAKEUP_CONFIG, reg);
/* clear wakeup status so we know what caused the wake up */
dwc3_ti_writel(am62, USBSS_WAKEUP_STAT, USBSS_WAKEUP_STAT_CLR);
}
clk_disable_unprepare(am62->usb2_refclk);
return 0;
}
static int dwc3_ti_resume_common(struct device *dev)
{
struct dwc3_am62 *am62 = dev_get_drvdata(dev);
u32 reg;
clk_prepare_enable(am62->usb2_refclk);
if (device_may_wakeup(dev)) {
/* Clear wakeup config enable bits */
dwc3_ti_writel(am62, USBSS_WAKEUP_CONFIG, USBSS_WAKEUP_CFG_NONE);
}
reg = dwc3_ti_readl(am62, USBSS_WAKEUP_STAT);
am62->wakeup_stat = reg;
return 0;
}
static UNIVERSAL_DEV_PM_OPS(dwc3_ti_pm_ops, dwc3_ti_suspend_common,
dwc3_ti_resume_common, NULL);
#define DEV_PM_OPS (&dwc3_ti_pm_ops)
#else
#define DEV_PM_OPS NULL
#endif /* CONFIG_PM */
static const struct of_device_id dwc3_ti_of_match[] = {
{ .compatible = "ti,am62-usb"},
{},
};
MODULE_DEVICE_TABLE(of, dwc3_ti_of_match);
static struct platform_driver dwc3_ti_driver = {
.probe = dwc3_ti_probe,
.remove_new = dwc3_ti_remove,
.driver = {
.name = "dwc3-am62",
.pm = DEV_PM_OPS,
.of_match_table = dwc3_ti_of_match,
},
};
module_platform_driver(dwc3_ti_driver);
MODULE_ALIAS("platform:dwc3-am62");
MODULE_AUTHOR("Aswath Govindraju <a-govindraju@ti.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("DesignWare USB3 TI Glue Layer");