blob: a7716202a8dd58d74f3d31fd48d0833de89db2be [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* xHCI host controller driver
*
* Copyright (C) 2008 Intel Corp.
*
* Author: Sarah Sharp
* Some code borrowed from the Linux EHCI driver.
*/
#include <linux/usb.h>
#include <linux/overflow.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#include "xhci.h"
#include "xhci-trace.h"
#include "xhci-debugfs.h"
/*
* Allocates a generic ring segment from the ring pool, sets the dma address,
* initializes the segment to zero, and sets the private next pointer to NULL.
*
* Section 4.11.1.1:
* "All components of all Command and Transfer TRBs shall be initialized to '0'"
*/
static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
unsigned int cycle_state,
unsigned int max_packet,
unsigned int num,
gfp_t flags)
{
struct xhci_segment *seg;
dma_addr_t dma;
int i;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
seg = kzalloc_node(sizeof(*seg), flags, dev_to_node(dev));
if (!seg)
return NULL;
seg->trbs = dma_pool_zalloc(xhci->segment_pool, flags, &dma);
if (!seg->trbs) {
kfree(seg);
return NULL;
}
if (max_packet) {
seg->bounce_buf = kzalloc_node(max_packet, flags,
dev_to_node(dev));
if (!seg->bounce_buf) {
dma_pool_free(xhci->segment_pool, seg->trbs, dma);
kfree(seg);
return NULL;
}
}
/* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */
if (cycle_state == 0) {
for (i = 0; i < TRBS_PER_SEGMENT; i++)
seg->trbs[i].link.control = cpu_to_le32(TRB_CYCLE);
}
seg->num = num;
seg->dma = dma;
seg->next = NULL;
return seg;
}
static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
{
if (seg->trbs) {
dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
seg->trbs = NULL;
}
kfree(seg->bounce_buf);
kfree(seg);
}
static void xhci_free_segments_for_ring(struct xhci_hcd *xhci,
struct xhci_segment *first)
{
struct xhci_segment *seg;
seg = first->next;
while (seg != first) {
struct xhci_segment *next = seg->next;
xhci_segment_free(xhci, seg);
seg = next;
}
xhci_segment_free(xhci, first);
}
/*
* Make the prev segment point to the next segment.
*
* Change the last TRB in the prev segment to be a Link TRB which points to the
* DMA address of the next segment. The caller needs to set any Link TRB
* related flags, such as End TRB, Toggle Cycle, and no snoop.
*/
static void xhci_link_segments(struct xhci_segment *prev,
struct xhci_segment *next,
enum xhci_ring_type type, bool chain_links)
{
u32 val;
if (!prev || !next)
return;
prev->next = next;
if (type != TYPE_EVENT) {
prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr =
cpu_to_le64(next->dma);
/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
val = le32_to_cpu(prev->trbs[TRBS_PER_SEGMENT-1].link.control);
val &= ~TRB_TYPE_BITMASK;
val |= TRB_TYPE(TRB_LINK);
if (chain_links)
val |= TRB_CHAIN;
prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val);
}
}
/*
* Link the ring to the new segments.
* Set Toggle Cycle for the new ring if needed.
*/
static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring,
struct xhci_segment *first, struct xhci_segment *last,
unsigned int num_segs)
{
struct xhci_segment *next, *seg;
bool chain_links;
if (!ring || !first || !last)
return;
/* Set chain bit for 0.95 hosts, and for isoc rings on AMD 0.96 host */
chain_links = !!(xhci_link_trb_quirk(xhci) ||
(ring->type == TYPE_ISOC &&
(xhci->quirks & XHCI_AMD_0x96_HOST)));
next = ring->enq_seg->next;
xhci_link_segments(ring->enq_seg, first, ring->type, chain_links);
xhci_link_segments(last, next, ring->type, chain_links);
ring->num_segs += num_segs;
if (ring->enq_seg == ring->last_seg) {
if (ring->type != TYPE_EVENT) {
ring->last_seg->trbs[TRBS_PER_SEGMENT-1].link.control
&= ~cpu_to_le32(LINK_TOGGLE);
last->trbs[TRBS_PER_SEGMENT-1].link.control
|= cpu_to_le32(LINK_TOGGLE);
}
ring->last_seg = last;
}
for (seg = last; seg != ring->last_seg; seg = seg->next)
seg->next->num = seg->num + 1;
}
/*
* We need a radix tree for mapping physical addresses of TRBs to which stream
* ID they belong to. We need to do this because the host controller won't tell
* us which stream ring the TRB came from. We could store the stream ID in an
* event data TRB, but that doesn't help us for the cancellation case, since the
* endpoint may stop before it reaches that event data TRB.
*
* The radix tree maps the upper portion of the TRB DMA address to a ring
* segment that has the same upper portion of DMA addresses. For example, say I
* have segments of size 1KB, that are always 1KB aligned. A segment may
* start at 0x10c91000 and end at 0x10c913f0. If I use the upper 10 bits, the
* key to the stream ID is 0x43244. I can use the DMA address of the TRB to
* pass the radix tree a key to get the right stream ID:
*
* 0x10c90fff >> 10 = 0x43243
* 0x10c912c0 >> 10 = 0x43244
* 0x10c91400 >> 10 = 0x43245
*
* Obviously, only those TRBs with DMA addresses that are within the segment
* will make the radix tree return the stream ID for that ring.
*
* Caveats for the radix tree:
*
* The radix tree uses an unsigned long as a key pair. On 32-bit systems, an
* unsigned long will be 32-bits; on a 64-bit system an unsigned long will be
* 64-bits. Since we only request 32-bit DMA addresses, we can use that as the
* key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit
* PCI DMA addresses on a 64-bit system). There might be a problem on 32-bit
* extended systems (where the DMA address can be bigger than 32-bits),
* if we allow the PCI dma mask to be bigger than 32-bits. So don't do that.
*/
static int xhci_insert_segment_mapping(struct radix_tree_root *trb_address_map,
struct xhci_ring *ring,
struct xhci_segment *seg,
gfp_t mem_flags)
{
unsigned long key;
int ret;
key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT);
/* Skip any segments that were already added. */
if (radix_tree_lookup(trb_address_map, key))
return 0;
ret = radix_tree_maybe_preload(mem_flags);
if (ret)
return ret;
ret = radix_tree_insert(trb_address_map,
key, ring);
radix_tree_preload_end();
return ret;
}
static void xhci_remove_segment_mapping(struct radix_tree_root *trb_address_map,
struct xhci_segment *seg)
{
unsigned long key;
key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT);
if (radix_tree_lookup(trb_address_map, key))
radix_tree_delete(trb_address_map, key);
}
static int xhci_update_stream_segment_mapping(
struct radix_tree_root *trb_address_map,
struct xhci_ring *ring,
struct xhci_segment *first_seg,
struct xhci_segment *last_seg,
gfp_t mem_flags)
{
struct xhci_segment *seg;
struct xhci_segment *failed_seg;
int ret;
if (WARN_ON_ONCE(trb_address_map == NULL))
return 0;
seg = first_seg;
do {
ret = xhci_insert_segment_mapping(trb_address_map,
ring, seg, mem_flags);
if (ret)
goto remove_streams;
if (seg == last_seg)
return 0;
seg = seg->next;
} while (seg != first_seg);
return 0;
remove_streams:
failed_seg = seg;
seg = first_seg;
do {
xhci_remove_segment_mapping(trb_address_map, seg);
if (seg == failed_seg)
return ret;
seg = seg->next;
} while (seg != first_seg);
return ret;
}
static void xhci_remove_stream_mapping(struct xhci_ring *ring)
{
struct xhci_segment *seg;
if (WARN_ON_ONCE(ring->trb_address_map == NULL))
return;
seg = ring->first_seg;
do {
xhci_remove_segment_mapping(ring->trb_address_map, seg);
seg = seg->next;
} while (seg != ring->first_seg);
}
static int xhci_update_stream_mapping(struct xhci_ring *ring, gfp_t mem_flags)
{
return xhci_update_stream_segment_mapping(ring->trb_address_map, ring,
ring->first_seg, ring->last_seg, mem_flags);
}
/* XXX: Do we need the hcd structure in all these functions? */
void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
{
if (!ring)
return;
trace_xhci_ring_free(ring);
if (ring->first_seg) {
if (ring->type == TYPE_STREAM)
xhci_remove_stream_mapping(ring);
xhci_free_segments_for_ring(xhci, ring->first_seg);
}
kfree(ring);
}
void xhci_initialize_ring_info(struct xhci_ring *ring,
unsigned int cycle_state)
{
/* The ring is empty, so the enqueue pointer == dequeue pointer */
ring->enqueue = ring->first_seg->trbs;
ring->enq_seg = ring->first_seg;
ring->dequeue = ring->enqueue;
ring->deq_seg = ring->first_seg;
/* The ring is initialized to 0. The producer must write 1 to the cycle
* bit to handover ownership of the TRB, so PCS = 1. The consumer must
* compare CCS to the cycle bit to check ownership, so CCS = 1.
*
* New rings are initialized with cycle state equal to 1; if we are
* handling ring expansion, set the cycle state equal to the old ring.
*/
ring->cycle_state = cycle_state;
/*
* Each segment has a link TRB, and leave an extra TRB for SW
* accounting purpose
*/
ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
}
EXPORT_SYMBOL_GPL(xhci_initialize_ring_info);
/* Allocate segments and link them for a ring */
static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci,
struct xhci_segment **first, struct xhci_segment **last,
unsigned int num_segs, unsigned int num,
unsigned int cycle_state, enum xhci_ring_type type,
unsigned int max_packet, gfp_t flags)
{
struct xhci_segment *prev;
bool chain_links;
/* Set chain bit for 0.95 hosts, and for isoc rings on AMD 0.96 host */
chain_links = !!(xhci_link_trb_quirk(xhci) ||
(type == TYPE_ISOC &&
(xhci->quirks & XHCI_AMD_0x96_HOST)));
prev = xhci_segment_alloc(xhci, cycle_state, max_packet, num, flags);
if (!prev)
return -ENOMEM;
num++;
*first = prev;
while (num < num_segs) {
struct xhci_segment *next;
next = xhci_segment_alloc(xhci, cycle_state, max_packet, num,
flags);
if (!next) {
prev = *first;
while (prev) {
next = prev->next;
xhci_segment_free(xhci, prev);
prev = next;
}
return -ENOMEM;
}
xhci_link_segments(prev, next, type, chain_links);
prev = next;
num++;
}
xhci_link_segments(prev, *first, type, chain_links);
*last = prev;
return 0;
}
/*
* Create a new ring with zero or more segments.
*
* Link each segment together into a ring.
* Set the end flag and the cycle toggle bit on the last segment.
* See section 4.9.1 and figures 15 and 16.
*/
struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
unsigned int num_segs, unsigned int cycle_state,
enum xhci_ring_type type, unsigned int max_packet, gfp_t flags)
{
struct xhci_ring *ring;
int ret;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
ring = kzalloc_node(sizeof(*ring), flags, dev_to_node(dev));
if (!ring)
return NULL;
ring->num_segs = num_segs;
ring->bounce_buf_len = max_packet;
INIT_LIST_HEAD(&ring->td_list);
ring->type = type;
if (num_segs == 0)
return ring;
ret = xhci_alloc_segments_for_ring(xhci, &ring->first_seg,
&ring->last_seg, num_segs, 0, cycle_state, type,
max_packet, flags);
if (ret)
goto fail;
/* Only event ring does not use link TRB */
if (type != TYPE_EVENT) {
/* See section 4.9.2.1 and 6.4.4.1 */
ring->last_seg->trbs[TRBS_PER_SEGMENT - 1].link.control |=
cpu_to_le32(LINK_TOGGLE);
}
xhci_initialize_ring_info(ring, cycle_state);
trace_xhci_ring_alloc(ring);
return ring;
fail:
kfree(ring);
return NULL;
}
void xhci_free_endpoint_ring(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
unsigned int ep_index)
{
xhci_ring_free(xhci, virt_dev->eps[ep_index].ring);
virt_dev->eps[ep_index].ring = NULL;
}
/*
* Expand an existing ring.
* Allocate a new ring which has same segment numbers and link the two rings.
*/
int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
unsigned int num_new_segs, gfp_t flags)
{
struct xhci_segment *first;
struct xhci_segment *last;
int ret;
ret = xhci_alloc_segments_for_ring(xhci, &first, &last,
num_new_segs, ring->enq_seg->num + 1,
ring->cycle_state, ring->type,
ring->bounce_buf_len, flags);
if (ret)
return -ENOMEM;
if (ring->type == TYPE_STREAM)
ret = xhci_update_stream_segment_mapping(ring->trb_address_map,
ring, first, last, flags);
if (ret) {
struct xhci_segment *next;
do {
next = first->next;
xhci_segment_free(xhci, first);
if (first == last)
break;
first = next;
} while (true);
return ret;
}
xhci_link_rings(xhci, ring, first, last, num_new_segs);
trace_xhci_ring_expansion(ring);
xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion,
"ring expansion succeed, now has %d segments",
ring->num_segs);
return 0;
}
struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
int type, gfp_t flags)
{
struct xhci_container_ctx *ctx;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
if ((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT))
return NULL;
ctx = kzalloc_node(sizeof(*ctx), flags, dev_to_node(dev));
if (!ctx)
return NULL;
ctx->type = type;
ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
if (type == XHCI_CTX_TYPE_INPUT)
ctx->size += CTX_SIZE(xhci->hcc_params);
ctx->bytes = dma_pool_zalloc(xhci->device_pool, flags, &ctx->dma);
if (!ctx->bytes) {
kfree(ctx);
return NULL;
}
return ctx;
}
void xhci_free_container_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx)
{
if (!ctx)
return;
dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
kfree(ctx);
}
struct xhci_input_control_ctx *xhci_get_input_control_ctx(
struct xhci_container_ctx *ctx)
{
if (ctx->type != XHCI_CTX_TYPE_INPUT)
return NULL;
return (struct xhci_input_control_ctx *)ctx->bytes;
}
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx)
{
if (ctx->type == XHCI_CTX_TYPE_DEVICE)
return (struct xhci_slot_ctx *)ctx->bytes;
return (struct xhci_slot_ctx *)
(ctx->bytes + CTX_SIZE(xhci->hcc_params));
}
struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx,
unsigned int ep_index)
{
/* increment ep index by offset of start of ep ctx array */
ep_index++;
if (ctx->type == XHCI_CTX_TYPE_INPUT)
ep_index++;
return (struct xhci_ep_ctx *)
(ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params)));
}
EXPORT_SYMBOL_GPL(xhci_get_ep_ctx);
/***************** Streams structures manipulation *************************/
static void xhci_free_stream_ctx(struct xhci_hcd *xhci,
unsigned int num_stream_ctxs,
struct xhci_stream_ctx *stream_ctx, dma_addr_t dma)
{
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs;
if (size > MEDIUM_STREAM_ARRAY_SIZE)
dma_free_coherent(dev, size, stream_ctx, dma);
else if (size > SMALL_STREAM_ARRAY_SIZE)
dma_pool_free(xhci->medium_streams_pool, stream_ctx, dma);
else
dma_pool_free(xhci->small_streams_pool, stream_ctx, dma);
}
/*
* The stream context array for each endpoint with bulk streams enabled can
* vary in size, based on:
* - how many streams the endpoint supports,
* - the maximum primary stream array size the host controller supports,
* - and how many streams the device driver asks for.
*
* The stream context array must be a power of 2, and can be as small as
* 64 bytes or as large as 1MB.
*/
static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
unsigned int num_stream_ctxs, dma_addr_t *dma,
gfp_t mem_flags)
{
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
size_t size = size_mul(sizeof(struct xhci_stream_ctx), num_stream_ctxs);
if (size > MEDIUM_STREAM_ARRAY_SIZE)
return dma_alloc_coherent(dev, size, dma, mem_flags);
if (size > SMALL_STREAM_ARRAY_SIZE)
return dma_pool_zalloc(xhci->medium_streams_pool, mem_flags, dma);
else
return dma_pool_zalloc(xhci->small_streams_pool, mem_flags, dma);
}
struct xhci_ring *xhci_dma_to_transfer_ring(
struct xhci_virt_ep *ep,
u64 address)
{
if (ep->ep_state & EP_HAS_STREAMS)
return radix_tree_lookup(&ep->stream_info->trb_address_map,
address >> TRB_SEGMENT_SHIFT);
return ep->ring;
}
/*
* Change an endpoint's internal structure so it supports stream IDs. The
* number of requested streams includes stream 0, which cannot be used by device
* drivers.
*
* The number of stream contexts in the stream context array may be bigger than
* the number of streams the driver wants to use. This is because the number of
* stream context array entries must be a power of two.
*/
struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
unsigned int num_stream_ctxs,
unsigned int num_streams,
unsigned int max_packet, gfp_t mem_flags)
{
struct xhci_stream_info *stream_info;
u32 cur_stream;
struct xhci_ring *cur_ring;
u64 addr;
int ret;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
xhci_dbg(xhci, "Allocating %u streams and %u stream context array entries.\n",
num_streams, num_stream_ctxs);
if (xhci->cmd_ring_reserved_trbs == MAX_RSVD_CMD_TRBS) {
xhci_dbg(xhci, "Command ring has no reserved TRBs available\n");
return NULL;
}
xhci->cmd_ring_reserved_trbs++;
stream_info = kzalloc_node(sizeof(*stream_info), mem_flags,
dev_to_node(dev));
if (!stream_info)
goto cleanup_trbs;
stream_info->num_streams = num_streams;
stream_info->num_stream_ctxs = num_stream_ctxs;
/* Initialize the array of virtual pointers to stream rings. */
stream_info->stream_rings = kcalloc_node(
num_streams, sizeof(struct xhci_ring *), mem_flags,
dev_to_node(dev));
if (!stream_info->stream_rings)
goto cleanup_info;
/* Initialize the array of DMA addresses for stream rings for the HW. */
stream_info->stream_ctx_array = xhci_alloc_stream_ctx(xhci,
num_stream_ctxs, &stream_info->ctx_array_dma,
mem_flags);
if (!stream_info->stream_ctx_array)
goto cleanup_ring_array;
/* Allocate everything needed to free the stream rings later */
stream_info->free_streams_command =
xhci_alloc_command_with_ctx(xhci, true, mem_flags);
if (!stream_info->free_streams_command)
goto cleanup_ctx;
INIT_RADIX_TREE(&stream_info->trb_address_map, GFP_ATOMIC);
/* Allocate rings for all the streams that the driver will use,
* and add their segment DMA addresses to the radix tree.
* Stream 0 is reserved.
*/
for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
stream_info->stream_rings[cur_stream] =
xhci_ring_alloc(xhci, 2, 1, TYPE_STREAM, max_packet,
mem_flags);
cur_ring = stream_info->stream_rings[cur_stream];
if (!cur_ring)
goto cleanup_rings;
cur_ring->stream_id = cur_stream;
cur_ring->trb_address_map = &stream_info->trb_address_map;
/* Set deq ptr, cycle bit, and stream context type */
addr = cur_ring->first_seg->dma |
SCT_FOR_CTX(SCT_PRI_TR) |
cur_ring->cycle_state;
stream_info->stream_ctx_array[cur_stream].stream_ring =
cpu_to_le64(addr);
xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n", cur_stream, addr);
ret = xhci_update_stream_mapping(cur_ring, mem_flags);
if (ret) {
xhci_ring_free(xhci, cur_ring);
stream_info->stream_rings[cur_stream] = NULL;
goto cleanup_rings;
}
}
/* Leave the other unused stream ring pointers in the stream context
* array initialized to zero. This will cause the xHC to give us an
* error if the device asks for a stream ID we don't have setup (if it
* was any other way, the host controller would assume the ring is
* "empty" and wait forever for data to be queued to that stream ID).
*/
return stream_info;
cleanup_rings:
for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
cur_ring = stream_info->stream_rings[cur_stream];
if (cur_ring) {
xhci_ring_free(xhci, cur_ring);
stream_info->stream_rings[cur_stream] = NULL;
}
}
xhci_free_command(xhci, stream_info->free_streams_command);
cleanup_ctx:
xhci_free_stream_ctx(xhci,
stream_info->num_stream_ctxs,
stream_info->stream_ctx_array,
stream_info->ctx_array_dma);
cleanup_ring_array:
kfree(stream_info->stream_rings);
cleanup_info:
kfree(stream_info);
cleanup_trbs:
xhci->cmd_ring_reserved_trbs--;
return NULL;
}
/*
* Sets the MaxPStreams field and the Linear Stream Array field.
* Sets the dequeue pointer to the stream context array.
*/
void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
struct xhci_ep_ctx *ep_ctx,
struct xhci_stream_info *stream_info)
{
u32 max_primary_streams;
/* MaxPStreams is the number of stream context array entries, not the
* number we're actually using. Must be in 2^(MaxPstreams + 1) format.
* fls(0) = 0, fls(0x1) = 1, fls(0x10) = 2, fls(0x100) = 3, etc.
*/
max_primary_streams = fls(stream_info->num_stream_ctxs) - 2;
xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
"Setting number of stream ctx array entries to %u",
1 << (max_primary_streams + 1));
ep_ctx->ep_info &= cpu_to_le32(~EP_MAXPSTREAMS_MASK);
ep_ctx->ep_info |= cpu_to_le32(EP_MAXPSTREAMS(max_primary_streams)
| EP_HAS_LSA);
ep_ctx->deq = cpu_to_le64(stream_info->ctx_array_dma);
}
/*
* Sets the MaxPStreams field and the Linear Stream Array field to 0.
* Reinstalls the "normal" endpoint ring (at its previous dequeue mark,
* not at the beginning of the ring).
*/
void xhci_setup_no_streams_ep_input_ctx(struct xhci_ep_ctx *ep_ctx,
struct xhci_virt_ep *ep)
{
dma_addr_t addr;
ep_ctx->ep_info &= cpu_to_le32(~(EP_MAXPSTREAMS_MASK | EP_HAS_LSA));
addr = xhci_trb_virt_to_dma(ep->ring->deq_seg, ep->ring->dequeue);
ep_ctx->deq = cpu_to_le64(addr | ep->ring->cycle_state);
}
/* Frees all stream contexts associated with the endpoint,
*
* Caller should fix the endpoint context streams fields.
*/
void xhci_free_stream_info(struct xhci_hcd *xhci,
struct xhci_stream_info *stream_info)
{
int cur_stream;
struct xhci_ring *cur_ring;
if (!stream_info)
return;
for (cur_stream = 1; cur_stream < stream_info->num_streams;
cur_stream++) {
cur_ring = stream_info->stream_rings[cur_stream];
if (cur_ring) {
xhci_ring_free(xhci, cur_ring);
stream_info->stream_rings[cur_stream] = NULL;
}
}
xhci_free_command(xhci, stream_info->free_streams_command);
xhci->cmd_ring_reserved_trbs--;
if (stream_info->stream_ctx_array)
xhci_free_stream_ctx(xhci,
stream_info->num_stream_ctxs,
stream_info->stream_ctx_array,
stream_info->ctx_array_dma);
kfree(stream_info->stream_rings);
kfree(stream_info);
}
/***************** Device context manipulation *************************/
static void xhci_free_tt_info(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
int slot_id)
{
struct list_head *tt_list_head;
struct xhci_tt_bw_info *tt_info, *next;
bool slot_found = false;
/* If the device never made it past the Set Address stage,
* it may not have the real_port set correctly.
*/
if (virt_dev->real_port == 0 ||
virt_dev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
xhci_dbg(xhci, "Bad real port.\n");
return;
}
tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
/* Multi-TT hubs will have more than one entry */
if (tt_info->slot_id == slot_id) {
slot_found = true;
list_del(&tt_info->tt_list);
kfree(tt_info);
} else if (slot_found) {
break;
}
}
}
int xhci_alloc_tt_info(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags)
{
struct xhci_tt_bw_info *tt_info;
unsigned int num_ports;
int i, j;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
if (!tt->multi)
num_ports = 1;
else
num_ports = hdev->maxchild;
for (i = 0; i < num_ports; i++, tt_info++) {
struct xhci_interval_bw_table *bw_table;
tt_info = kzalloc_node(sizeof(*tt_info), mem_flags,
dev_to_node(dev));
if (!tt_info)
goto free_tts;
INIT_LIST_HEAD(&tt_info->tt_list);
list_add(&tt_info->tt_list,
&xhci->rh_bw[virt_dev->real_port - 1].tts);
tt_info->slot_id = virt_dev->udev->slot_id;
if (tt->multi)
tt_info->ttport = i+1;
bw_table = &tt_info->bw_table;
for (j = 0; j < XHCI_MAX_INTERVAL; j++)
INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
}
return 0;
free_tts:
xhci_free_tt_info(xhci, virt_dev, virt_dev->udev->slot_id);
return -ENOMEM;
}
/* All the xhci_tds in the ring's TD list should be freed at this point.
* Should be called with xhci->lock held if there is any chance the TT lists
* will be manipulated by the configure endpoint, allocate device, or update
* hub functions while this function is removing the TT entries from the list.
*/
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
{
struct xhci_virt_device *dev;
int i;
int old_active_eps = 0;
/* Slot ID 0 is reserved */
if (slot_id == 0 || !xhci->devs[slot_id])
return;
dev = xhci->devs[slot_id];
xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
if (!dev)
return;
trace_xhci_free_virt_device(dev);
if (dev->tt_info)
old_active_eps = dev->tt_info->active_eps;
for (i = 0; i < 31; i++) {
if (dev->eps[i].ring)
xhci_ring_free(xhci, dev->eps[i].ring);
if (dev->eps[i].stream_info)
xhci_free_stream_info(xhci,
dev->eps[i].stream_info);
/*
* Endpoints are normally deleted from the bandwidth list when
* endpoints are dropped, before device is freed.
* If host is dying or being removed then endpoints aren't
* dropped cleanly, so delete the endpoint from list here.
* Only applicable for hosts with software bandwidth checking.
*/
if (!list_empty(&dev->eps[i].bw_endpoint_list)) {
list_del_init(&dev->eps[i].bw_endpoint_list);
xhci_dbg(xhci, "Slot %u endpoint %u not removed from BW list!\n",
slot_id, i);
}
}
/* If this is a hub, free the TT(s) from the TT list */
xhci_free_tt_info(xhci, dev, slot_id);
/* If necessary, update the number of active TTs on this root port */
xhci_update_tt_active_eps(xhci, dev, old_active_eps);
if (dev->in_ctx)
xhci_free_container_ctx(xhci, dev->in_ctx);
if (dev->out_ctx)
xhci_free_container_ctx(xhci, dev->out_ctx);
if (dev->udev && dev->udev->slot_id)
dev->udev->slot_id = 0;
kfree(xhci->devs[slot_id]);
xhci->devs[slot_id] = NULL;
}
/*
* Free a virt_device structure.
* If the virt_device added a tt_info (a hub) and has children pointing to
* that tt_info, then free the child first. Recursive.
* We can't rely on udev at this point to find child-parent relationships.
*/
static void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id)
{
struct xhci_virt_device *vdev;
struct list_head *tt_list_head;
struct xhci_tt_bw_info *tt_info, *next;
int i;
vdev = xhci->devs[slot_id];
if (!vdev)
return;
if (vdev->real_port == 0 ||
vdev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
xhci_dbg(xhci, "Bad vdev->real_port.\n");
goto out;
}
tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts);
list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
/* is this a hub device that added a tt_info to the tts list */
if (tt_info->slot_id == slot_id) {
/* are any devices using this tt_info? */
for (i = 1; i < HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
vdev = xhci->devs[i];
if (vdev && (vdev->tt_info == tt_info))
xhci_free_virt_devices_depth_first(
xhci, i);
}
}
}
out:
/* we are now at a leaf device */
xhci_debugfs_remove_slot(xhci, slot_id);
xhci_free_virt_device(xhci, slot_id);
}
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
struct usb_device *udev, gfp_t flags)
{
struct xhci_virt_device *dev;
int i;
/* Slot ID 0 is reserved */
if (slot_id == 0 || xhci->devs[slot_id]) {
xhci_warn(xhci, "Bad Slot ID %d\n", slot_id);
return 0;
}
dev = kzalloc(sizeof(*dev), flags);
if (!dev)
return 0;
dev->slot_id = slot_id;
/* Allocate the (output) device context that will be used in the HC. */
dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
if (!dev->out_ctx)
goto fail;
xhci_dbg(xhci, "Slot %d output ctx = 0x%pad (dma)\n", slot_id, &dev->out_ctx->dma);
/* Allocate the (input) device context for address device command */
dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
if (!dev->in_ctx)
goto fail;
xhci_dbg(xhci, "Slot %d input ctx = 0x%pad (dma)\n", slot_id, &dev->in_ctx->dma);
/* Initialize the cancellation and bandwidth list for each ep */
for (i = 0; i < 31; i++) {
dev->eps[i].ep_index = i;
dev->eps[i].vdev = dev;
dev->eps[i].xhci = xhci;
INIT_LIST_HEAD(&dev->eps[i].cancelled_td_list);
INIT_LIST_HEAD(&dev->eps[i].bw_endpoint_list);
}
/* Allocate endpoint 0 ring */
dev->eps[0].ring = xhci_ring_alloc(xhci, 2, 1, TYPE_CTRL, 0, flags);
if (!dev->eps[0].ring)
goto fail;
dev->udev = udev;
/* Point to output device context in dcbaa. */
xhci->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(dev->out_ctx->dma);
xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
slot_id,
&xhci->dcbaa->dev_context_ptrs[slot_id],
le64_to_cpu(xhci->dcbaa->dev_context_ptrs[slot_id]));
trace_xhci_alloc_virt_device(dev);
xhci->devs[slot_id] = dev;
return 1;
fail:
if (dev->in_ctx)
xhci_free_container_ctx(xhci, dev->in_ctx);
if (dev->out_ctx)
xhci_free_container_ctx(xhci, dev->out_ctx);
kfree(dev);
return 0;
}
void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
struct usb_device *udev)
{
struct xhci_virt_device *virt_dev;
struct xhci_ep_ctx *ep0_ctx;
struct xhci_ring *ep_ring;
virt_dev = xhci->devs[udev->slot_id];
ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
ep_ring = virt_dev->eps[0].ring;
/*
* FIXME we don't keep track of the dequeue pointer very well after a
* Set TR dequeue pointer, so we're setting the dequeue pointer of the
* host to our enqueue pointer. This should only be called after a
* configured device has reset, so all control transfers should have
* been completed or cancelled before the reset.
*/
ep0_ctx->deq = cpu_to_le64(xhci_trb_virt_to_dma(ep_ring->enq_seg,
ep_ring->enqueue)
| ep_ring->cycle_state);
}
/*
* The xHCI roothub may have ports of differing speeds in any order in the port
* status registers.
*
* The xHCI hardware wants to know the roothub port number that the USB device
* is attached to (or the roothub port its ancestor hub is attached to). All we
* know is the index of that port under either the USB 2.0 or the USB 3.0
* roothub, but that doesn't give us the real index into the HW port status
* registers. Call xhci_find_raw_port_number() to get real index.
*/
static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
struct usb_device *udev)
{
struct usb_device *top_dev;
struct usb_hcd *hcd;
if (udev->speed >= USB_SPEED_SUPER)
hcd = xhci_get_usb3_hcd(xhci);
else
hcd = xhci->main_hcd;
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
return xhci_find_raw_port_number(hcd, top_dev->portnum);
}
/* Setup an xHCI virtual device for a Set Address command */
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
{
struct xhci_virt_device *dev;
struct xhci_ep_ctx *ep0_ctx;
struct xhci_slot_ctx *slot_ctx;
u32 port_num;
u32 max_packets;
struct usb_device *top_dev;
dev = xhci->devs[udev->slot_id];
/* Slot ID 0 is reserved */
if (udev->slot_id == 0 || !dev) {
xhci_warn(xhci, "Slot ID %d is not assigned to this device\n",
udev->slot_id);
return -EINVAL;
}
ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
/* 3) Only the control endpoint is valid - one endpoint context */
slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route);
switch (udev->speed) {
case USB_SPEED_SUPER_PLUS:
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SSP);
max_packets = MAX_PACKET(512);
break;
case USB_SPEED_SUPER:
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
max_packets = MAX_PACKET(512);
break;
case USB_SPEED_HIGH:
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS);
max_packets = MAX_PACKET(64);
break;
/* USB core guesses at a 64-byte max packet first for FS devices */
case USB_SPEED_FULL:
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS);
max_packets = MAX_PACKET(64);
break;
case USB_SPEED_LOW:
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_LS);
max_packets = MAX_PACKET(8);
break;
default:
/* Speed was set earlier, this shouldn't happen. */
return -EINVAL;
}
/* Find the root hub port this device is under */
port_num = xhci_find_real_port_number(xhci, udev);
if (!port_num)
return -EINVAL;
slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(port_num));
/* Set the port number in the virtual_device to the faked port number */
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
dev->fake_port = top_dev->portnum;
dev->real_port = port_num;
xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num);
xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->fake_port);
/* Find the right bandwidth table that this device will be a part of.
* If this is a full speed device attached directly to a root port (or a
* decendent of one), it counts as a primary bandwidth domain, not a
* secondary bandwidth domain under a TT. An xhci_tt_info structure
* will never be created for the HS root hub.
*/
if (!udev->tt || !udev->tt->hub->parent) {
dev->bw_table = &xhci->rh_bw[port_num - 1].bw_table;
} else {
struct xhci_root_port_bw_info *rh_bw;
struct xhci_tt_bw_info *tt_bw;
rh_bw = &xhci->rh_bw[port_num - 1];
/* Find the right TT. */
list_for_each_entry(tt_bw, &rh_bw->tts, tt_list) {
if (tt_bw->slot_id != udev->tt->hub->slot_id)
continue;
if (!dev->udev->tt->multi ||
(udev->tt->multi &&
tt_bw->ttport == dev->udev->ttport)) {
dev->bw_table = &tt_bw->bw_table;
dev->tt_info = tt_bw;
break;
}
}
if (!dev->tt_info)
xhci_warn(xhci, "WARN: Didn't find a matching TT\n");
}
/* Is this a LS/FS device under an external HS hub? */
if (udev->tt && udev->tt->hub->parent) {
slot_ctx->tt_info = cpu_to_le32(udev->tt->hub->slot_id |
(udev->ttport << 8));
if (udev->tt->multi)
slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
}
xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
/* Step 4 - ring already allocated */
/* Step 5 */
ep0_ctx->ep_info2 = cpu_to_le32(EP_TYPE(CTRL_EP));
/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
ep0_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(0) | ERROR_COUNT(3) |
max_packets);
ep0_ctx->deq = cpu_to_le64(dev->eps[0].ring->first_seg->dma |
dev->eps[0].ring->cycle_state);
trace_xhci_setup_addressable_virt_device(dev);
/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
return 0;
}
/*
* Convert interval expressed as 2^(bInterval - 1) == interval into
* straight exponent value 2^n == interval.
*
*/
static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
unsigned int interval;
interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
if (interval != ep->desc.bInterval - 1)
dev_warn(&udev->dev,
"ep %#x - rounding interval to %d %sframes\n",
ep->desc.bEndpointAddress,
1 << interval,
udev->speed == USB_SPEED_FULL ? "" : "micro");
if (udev->speed == USB_SPEED_FULL) {
/*
* Full speed isoc endpoints specify interval in frames,
* not microframes. We are using microframes everywhere,
* so adjust accordingly.
*/
interval += 3; /* 1 frame = 2^3 uframes */
}
return interval;
}
/*
* Convert bInterval expressed in microframes (in 1-255 range) to exponent of
* microframes, rounded down to nearest power of 2.
*/
static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
struct usb_host_endpoint *ep, unsigned int desc_interval,
unsigned int min_exponent, unsigned int max_exponent)
{
unsigned int interval;
interval = fls(desc_interval) - 1;
interval = clamp_val(interval, min_exponent, max_exponent);
if ((1 << interval) != desc_interval)
dev_dbg(&udev->dev,
"ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
ep->desc.bEndpointAddress,
1 << interval,
desc_interval);
return interval;
}
static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
if (ep->desc.bInterval == 0)
return 0;
return xhci_microframes_to_exponent(udev, ep,
ep->desc.bInterval, 0, 15);
}
static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
return xhci_microframes_to_exponent(udev, ep,
ep->desc.bInterval * 8, 3, 10);
}
/* Return the polling or NAK interval.
*
* The polling interval is expressed in "microframes". If xHCI's Interval field
* is set to N, it will service the endpoint every 2^(Interval)*125us.
*
* The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
* is set to 0.
*/
static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
unsigned int interval = 0;
switch (udev->speed) {
case USB_SPEED_HIGH:
/* Max NAK rate */
if (usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_bulk(&ep->desc)) {
interval = xhci_parse_microframe_interval(udev, ep);
break;
}
fallthrough; /* SS and HS isoc/int have same decoding */
case USB_SPEED_SUPER_PLUS:
case USB_SPEED_SUPER:
if (usb_endpoint_xfer_int(&ep->desc) ||
usb_endpoint_xfer_isoc(&ep->desc)) {
interval = xhci_parse_exponent_interval(udev, ep);
}
break;
case USB_SPEED_FULL:
if (usb_endpoint_xfer_isoc(&ep->desc)) {
interval = xhci_parse_exponent_interval(udev, ep);
break;
}
/*
* Fall through for interrupt endpoint interval decoding
* since it uses the same rules as low speed interrupt
* endpoints.
*/
fallthrough;
case USB_SPEED_LOW:
if (usb_endpoint_xfer_int(&ep->desc) ||
usb_endpoint_xfer_isoc(&ep->desc)) {
interval = xhci_parse_frame_interval(udev, ep);
}
break;
default:
BUG();
}
return interval;
}
/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
* High speed endpoint descriptors can define "the number of additional
* transaction opportunities per microframe", but that goes in the Max Burst
* endpoint context field.
*/
static u32 xhci_get_endpoint_mult(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
if (udev->speed < USB_SPEED_SUPER ||
!usb_endpoint_xfer_isoc(&ep->desc))
return 0;
return ep->ss_ep_comp.bmAttributes;
}
static u32 xhci_get_endpoint_max_burst(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
/* Super speed and Plus have max burst in ep companion desc */
if (udev->speed >= USB_SPEED_SUPER)
return ep->ss_ep_comp.bMaxBurst;
if (udev->speed == USB_SPEED_HIGH &&
(usb_endpoint_xfer_isoc(&ep->desc) ||
usb_endpoint_xfer_int(&ep->desc)))
return usb_endpoint_maxp_mult(&ep->desc) - 1;
return 0;
}
static u32 xhci_get_endpoint_type(struct usb_host_endpoint *ep)
{
int in;
in = usb_endpoint_dir_in(&ep->desc);
switch (usb_endpoint_type(&ep->desc)) {
case USB_ENDPOINT_XFER_CONTROL:
return CTRL_EP;
case USB_ENDPOINT_XFER_BULK:
return in ? BULK_IN_EP : BULK_OUT_EP;
case USB_ENDPOINT_XFER_ISOC:
return in ? ISOC_IN_EP : ISOC_OUT_EP;
case USB_ENDPOINT_XFER_INT:
return in ? INT_IN_EP : INT_OUT_EP;
}
return 0;
}
/* Return the maximum endpoint service interval time (ESIT) payload.
* Basically, this is the maxpacket size, multiplied by the burst size
* and mult size.
*/
static u32 xhci_get_max_esit_payload(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
int max_burst;
int max_packet;
/* Only applies for interrupt or isochronous endpoints */
if (usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_bulk(&ep->desc))
return 0;
/* SuperSpeedPlus Isoc ep sending over 48k per esit */
if ((udev->speed >= USB_SPEED_SUPER_PLUS) &&
USB_SS_SSP_ISOC_COMP(ep->ss_ep_comp.bmAttributes))
return le32_to_cpu(ep->ssp_isoc_ep_comp.dwBytesPerInterval);
/* SuperSpeed or SuperSpeedPlus Isoc ep with less than 48k per esit */
if (udev->speed >= USB_SPEED_SUPER)
return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval);
max_packet = usb_endpoint_maxp(&ep->desc);
max_burst = usb_endpoint_maxp_mult(&ep->desc);
/* A 0 in max burst means 1 transfer per ESIT */
return max_packet * max_burst;
}
/* Set up an endpoint with one ring segment. Do not allocate stream rings.
* Drivers will have to call usb_alloc_streams() to do that.
*/
int xhci_endpoint_init(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
struct usb_device *udev,
struct usb_host_endpoint *ep,
gfp_t mem_flags)
{
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
struct xhci_ring *ep_ring;
unsigned int max_packet;
enum xhci_ring_type ring_type;
u32 max_esit_payload;
u32 endpoint_type;
unsigned int max_burst;
unsigned int interval;
unsigned int mult;
unsigned int avg_trb_len;
unsigned int err_count = 0;
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
endpoint_type = xhci_get_endpoint_type(ep);
if (!endpoint_type)
return -EINVAL;
ring_type = usb_endpoint_type(&ep->desc);
/*
* Get values to fill the endpoint context, mostly from ep descriptor.
* The average TRB buffer lengt for bulk endpoints is unclear as we
* have no clue on scatter gather list entry size. For Isoc and Int,
* set it to max available. See xHCI 1.1 spec 4.14.1.1 for details.
*/
max_esit_payload = xhci_get_max_esit_payload(udev, ep);
interval = xhci_get_endpoint_interval(udev, ep);
/* Periodic endpoint bInterval limit quirk */
if (usb_endpoint_xfer_int(&ep->desc) ||
usb_endpoint_xfer_isoc(&ep->desc)) {
if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_7) &&
udev->speed >= USB_SPEED_HIGH &&
interval >= 7) {
interval = 6;
}
}
mult = xhci_get_endpoint_mult(udev, ep);
max_packet = usb_endpoint_maxp(&ep->desc);
max_burst = xhci_get_endpoint_max_burst(udev, ep);
avg_trb_len = max_esit_payload;
/* FIXME dig Mult and streams info out of ep companion desc */
/* Allow 3 retries for everything but isoc, set CErr = 3 */
if (!usb_endpoint_xfer_isoc(&ep->desc))
err_count = 3;
/* HS bulk max packet should be 512, FS bulk supports 8, 16, 32 or 64 */
if (usb_endpoint_xfer_bulk(&ep->desc)) {
if (udev->speed == USB_SPEED_HIGH)
max_packet = 512;
if (udev->speed == USB_SPEED_FULL) {
max_packet = rounddown_pow_of_two(max_packet);
max_packet = clamp_val(max_packet, 8, 64);
}
}
/* xHCI 1.0 and 1.1 indicates that ctrl ep avg TRB Length should be 8 */
if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100)
avg_trb_len = 8;
/* xhci 1.1 with LEC support doesn't use mult field, use RsvdZ */
if ((xhci->hci_version > 0x100) && HCC2_LEC(xhci->hcc_params2))
mult = 0;
/* Set up the endpoint ring */
virt_dev->eps[ep_index].new_ring =
xhci_ring_alloc(xhci, 2, 1, ring_type, max_packet, mem_flags);
if (!virt_dev->eps[ep_index].new_ring)
return -ENOMEM;
virt_dev->eps[ep_index].skip = false;
ep_ring = virt_dev->eps[ep_index].new_ring;
/* Fill the endpoint context */
ep_ctx->ep_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_HI(max_esit_payload) |
EP_INTERVAL(interval) |
EP_MULT(mult));
ep_ctx->ep_info2 = cpu_to_le32(EP_TYPE(endpoint_type) |
MAX_PACKET(max_packet) |
MAX_BURST(max_burst) |
ERROR_COUNT(err_count));
ep_ctx->deq = cpu_to_le64(ep_ring->first_seg->dma |
ep_ring->cycle_state);
ep_ctx->tx_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_LO(max_esit_payload) |
EP_AVG_TRB_LENGTH(avg_trb_len));
return 0;
}
void xhci_endpoint_zero(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
struct usb_host_endpoint *ep)
{
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
ep_ctx->ep_info = 0;
ep_ctx->ep_info2 = 0;
ep_ctx->deq = 0;
ep_ctx->tx_info = 0;
/* Don't free the endpoint ring until the set interface or configuration
* request succeeds.
*/
}
void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info)
{
bw_info->ep_interval = 0;
bw_info->mult = 0;
bw_info->num_packets = 0;
bw_info->max_packet_size = 0;
bw_info->type = 0;
bw_info->max_esit_payload = 0;
}
void xhci_update_bw_info(struct xhci_hcd *xhci,
struct xhci_container_ctx *in_ctx,
struct xhci_input_control_ctx *ctrl_ctx,
struct xhci_virt_device *virt_dev)
{
struct xhci_bw_info *bw_info;
struct xhci_ep_ctx *ep_ctx;
unsigned int ep_type;
int i;
for (i = 1; i < 31; i++) {
bw_info = &virt_dev->eps[i].bw_info;
/* We can't tell what endpoint type is being dropped, but
* unconditionally clearing the bandwidth info for non-periodic
* endpoints should be harmless because the info will never be
* set in the first place.
*/
if (!EP_IS_ADDED(ctrl_ctx, i) && EP_IS_DROPPED(ctrl_ctx, i)) {
/* Dropped endpoint */
xhci_clear_endpoint_bw_info(bw_info);
continue;
}
if (EP_IS_ADDED(ctrl_ctx, i)) {
ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, i);
ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2));
/* Ignore non-periodic endpoints */
if (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
ep_type != ISOC_IN_EP &&
ep_type != INT_IN_EP)
continue;
/* Added or changed endpoint */
bw_info->ep_interval = CTX_TO_EP_INTERVAL(
le32_to_cpu(ep_ctx->ep_info));
/* Number of packets and mult are zero-based in the
* input context, but we want one-based for the
* interval table.
*/
bw_info->mult = CTX_TO_EP_MULT(
le32_to_cpu(ep_ctx->ep_info)) + 1;
bw_info->num_packets = CTX_TO_MAX_BURST(
le32_to_cpu(ep_ctx->ep_info2)) + 1;
bw_info->max_packet_size = MAX_PACKET_DECODED(
le32_to_cpu(ep_ctx->ep_info2));
bw_info->type = ep_type;
bw_info->max_esit_payload = CTX_TO_MAX_ESIT_PAYLOAD(
le32_to_cpu(ep_ctx->tx_info));
}
}
}
/* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
* Useful when you want to change one particular aspect of the endpoint and then
* issue a configure endpoint command.
*/
void xhci_endpoint_copy(struct xhci_hcd *xhci,
struct xhci_container_ctx *in_ctx,
struct xhci_container_ctx *out_ctx,
unsigned int ep_index)
{
struct xhci_ep_ctx *out_ep_ctx;
struct xhci_ep_ctx *in_ep_ctx;
out_ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
in_ep_ctx->ep_info = out_ep_ctx->ep_info;
in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2;
in_ep_ctx->deq = out_ep_ctx->deq;
in_ep_ctx->tx_info = out_ep_ctx->tx_info;
if (xhci->quirks & XHCI_MTK_HOST) {
in_ep_ctx->reserved[0] = out_ep_ctx->reserved[0];
in_ep_ctx->reserved[1] = out_ep_ctx->reserved[1];
}
}
/* Copy output xhci_slot_ctx to the input xhci_slot_ctx.
* Useful when you want to change one particular aspect of the endpoint and then
* issue a configure endpoint command. Only the context entries field matters,
* but we'll copy the whole thing anyway.
*/
void xhci_slot_copy(struct xhci_hcd *xhci,
struct xhci_container_ctx *in_ctx,
struct xhci_container_ctx *out_ctx)
{
struct xhci_slot_ctx *in_slot_ctx;
struct xhci_slot_ctx *out_slot_ctx;
in_slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
out_slot_ctx = xhci_get_slot_ctx(xhci, out_ctx);
in_slot_ctx->dev_info = out_slot_ctx->dev_info;
in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2;
in_slot_ctx->tt_info = out_slot_ctx->tt_info;
in_slot_ctx->dev_state = out_slot_ctx->dev_state;
}
/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
{
int i;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Allocating %d scratchpad buffers", num_sp);
if (!num_sp)
return 0;
xhci->scratchpad = kzalloc_node(sizeof(*xhci->scratchpad), flags,
dev_to_node(dev));
if (!xhci->scratchpad)
goto fail_sp;
xhci->scratchpad->sp_array = dma_alloc_coherent(dev,
size_mul(sizeof(u64), num_sp),
&xhci->scratchpad->sp_dma, flags);
if (!xhci->scratchpad->sp_array)
goto fail_sp2;
xhci->scratchpad->sp_buffers = kcalloc_node(num_sp, sizeof(void *),
flags, dev_to_node(dev));
if (!xhci->scratchpad->sp_buffers)
goto fail_sp3;
xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma);
for (i = 0; i < num_sp; i++) {
dma_addr_t dma;
void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma,
flags);
if (!buf)
goto fail_sp4;
xhci->scratchpad->sp_array[i] = dma;
xhci->scratchpad->sp_buffers[i] = buf;
}
return 0;
fail_sp4:
while (i--)
dma_free_coherent(dev, xhci->page_size,
xhci->scratchpad->sp_buffers[i],
xhci->scratchpad->sp_array[i]);
kfree(xhci->scratchpad->sp_buffers);
fail_sp3:
dma_free_coherent(dev, num_sp * sizeof(u64),
xhci->scratchpad->sp_array,
xhci->scratchpad->sp_dma);
fail_sp2:
kfree(xhci->scratchpad);
xhci->scratchpad = NULL;
fail_sp:
return -ENOMEM;
}
static void scratchpad_free(struct xhci_hcd *xhci)
{
int num_sp;
int i;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
if (!xhci->scratchpad)
return;
num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
for (i = 0; i < num_sp; i++) {
dma_free_coherent(dev, xhci->page_size,
xhci->scratchpad->sp_buffers[i],
xhci->scratchpad->sp_array[i]);
}
kfree(xhci->scratchpad->sp_buffers);
dma_free_coherent(dev, num_sp * sizeof(u64),
xhci->scratchpad->sp_array,
xhci->scratchpad->sp_dma);
kfree(xhci->scratchpad);
xhci->scratchpad = NULL;
}
struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
bool allocate_completion, gfp_t mem_flags)
{
struct xhci_command *command;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
command = kzalloc_node(sizeof(*command), mem_flags, dev_to_node(dev));
if (!command)
return NULL;
if (allocate_completion) {
command->completion =
kzalloc_node(sizeof(struct completion), mem_flags,
dev_to_node(dev));
if (!command->completion) {
kfree(command);
return NULL;
}
init_completion(command->completion);
}
command->status = 0;
/* set default timeout to 5000 ms */
command->timeout_ms = XHCI_CMD_DEFAULT_TIMEOUT;
INIT_LIST_HEAD(&command->cmd_list);
return command;
}
struct xhci_command *xhci_alloc_command_with_ctx(struct xhci_hcd *xhci,
bool allocate_completion, gfp_t mem_flags)
{
struct xhci_command *command;
command = xhci_alloc_command(xhci, allocate_completion, mem_flags);
if (!command)
return NULL;
command->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT,
mem_flags);
if (!command->in_ctx) {
kfree(command->completion);
kfree(command);
return NULL;
}
return command;
}
void xhci_urb_free_priv(struct urb_priv *urb_priv)
{
kfree(urb_priv);
}
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command)
{
xhci_free_container_ctx(xhci,
command->in_ctx);
kfree(command->completion);
kfree(command);
}
static int xhci_alloc_erst(struct xhci_hcd *xhci,
struct xhci_ring *evt_ring,
struct xhci_erst *erst,
gfp_t flags)
{
size_t size;
unsigned int val;
struct xhci_segment *seg;
struct xhci_erst_entry *entry;
size = size_mul(sizeof(struct xhci_erst_entry), evt_ring->num_segs);
erst->entries = dma_alloc_coherent(xhci_to_hcd(xhci)->self.sysdev,
size, &erst->erst_dma_addr, flags);
if (!erst->entries)
return -ENOMEM;
erst->num_entries = evt_ring->num_segs;
seg = evt_ring->first_seg;
for (val = 0; val < evt_ring->num_segs; val++) {
entry = &erst->entries[val];
entry->seg_addr = cpu_to_le64(seg->dma);
entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT);
entry->rsvd = 0;
seg = seg->next;
}
return 0;
}
static void
xhci_remove_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
{
u32 tmp;
if (!ir)
return;
/*
* Clean out interrupter registers except ERSTBA. Clearing either the
* low or high 32 bits of ERSTBA immediately causes the controller to
* dereference the partially cleared 64 bit address, causing IOMMU error.
*/
if (ir->ir_set) {
tmp = readl(&ir->ir_set->erst_size);
tmp &= ERST_SIZE_MASK;
writel(tmp, &ir->ir_set->erst_size);
xhci_write_64(xhci, ERST_EHB, &ir->ir_set->erst_dequeue);
}
}
static void
xhci_free_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
{
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
size_t erst_size;
if (!ir)
return;
erst_size = sizeof(struct xhci_erst_entry) * ir->erst.num_entries;
if (ir->erst.entries)
dma_free_coherent(dev, erst_size,
ir->erst.entries,
ir->erst.erst_dma_addr);
ir->erst.entries = NULL;
/* free interrupter event ring */
if (ir->event_ring)
xhci_ring_free(xhci, ir->event_ring);
ir->event_ring = NULL;
kfree(ir);
}
void xhci_remove_secondary_interrupter(struct usb_hcd *hcd, struct xhci_interrupter *ir)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
unsigned int intr_num;
spin_lock_irq(&xhci->lock);
/* interrupter 0 is primary interrupter, don't touch it */
if (!ir || !ir->intr_num || ir->intr_num >= xhci->max_interrupters) {
xhci_dbg(xhci, "Invalid secondary interrupter, can't remove\n");
spin_unlock_irq(&xhci->lock);
return;
}
intr_num = ir->intr_num;
xhci_remove_interrupter(xhci, ir);
xhci->interrupters[intr_num] = NULL;
spin_unlock_irq(&xhci->lock);
xhci_free_interrupter(xhci, ir);
}
EXPORT_SYMBOL_GPL(xhci_remove_secondary_interrupter);
void xhci_mem_cleanup(struct xhci_hcd *xhci)
{
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
int i, j, num_ports;
cancel_delayed_work_sync(&xhci->cmd_timer);
for (i = 0; i < xhci->max_interrupters; i++) {
if (xhci->interrupters[i]) {
xhci_remove_interrupter(xhci, xhci->interrupters[i]);
xhci_free_interrupter(xhci, xhci->interrupters[i]);
xhci->interrupters[i] = NULL;
}
}
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed interrupters");
if (xhci->cmd_ring)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed command ring");
xhci_cleanup_command_queue(xhci);
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
for (i = 0; i < num_ports && xhci->rh_bw; i++) {
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
struct list_head *ep = &bwt->interval_bw[j].endpoints;
while (!list_empty(ep))
list_del_init(ep->next);
}
}
for (i = HCS_MAX_SLOTS(xhci->hcs_params1); i > 0; i--)
xhci_free_virt_devices_depth_first(xhci, i);
dma_pool_destroy(xhci->segment_pool);
xhci->segment_pool = NULL;
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed segment pool");
dma_pool_destroy(xhci->device_pool);
xhci->device_pool = NULL;
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed device context pool");
dma_pool_destroy(xhci->small_streams_pool);
xhci->small_streams_pool = NULL;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Freed small stream array pool");
dma_pool_destroy(xhci->medium_streams_pool);
xhci->medium_streams_pool = NULL;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Freed medium stream array pool");
if (xhci->dcbaa)
dma_free_coherent(dev, sizeof(*xhci->dcbaa),
xhci->dcbaa, xhci->dcbaa->dma);
xhci->dcbaa = NULL;
scratchpad_free(xhci);
if (!xhci->rh_bw)
goto no_bw;
for (i = 0; i < num_ports; i++) {
struct xhci_tt_bw_info *tt, *n;
list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) {
list_del(&tt->tt_list);
kfree(tt);
}
}
no_bw:
xhci->cmd_ring_reserved_trbs = 0;
xhci->usb2_rhub.num_ports = 0;
xhci->usb3_rhub.num_ports = 0;
xhci->num_active_eps = 0;
kfree(xhci->usb2_rhub.ports);
kfree(xhci->usb3_rhub.ports);
kfree(xhci->hw_ports);
kfree(xhci->rh_bw);
kfree(xhci->ext_caps);
for (i = 0; i < xhci->num_port_caps; i++)
kfree(xhci->port_caps[i].psi);
kfree(xhci->port_caps);
kfree(xhci->interrupters);
xhci->num_port_caps = 0;
xhci->usb2_rhub.ports = NULL;
xhci->usb3_rhub.ports = NULL;
xhci->hw_ports = NULL;
xhci->rh_bw = NULL;
xhci->ext_caps = NULL;
xhci->port_caps = NULL;
xhci->interrupters = NULL;
xhci->page_size = 0;
xhci->page_shift = 0;
xhci->usb2_rhub.bus_state.bus_suspended = 0;
xhci->usb3_rhub.bus_state.bus_suspended = 0;
}
static void xhci_set_hc_event_deq(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
{
dma_addr_t deq;
deq = xhci_trb_virt_to_dma(ir->event_ring->deq_seg,
ir->event_ring->dequeue);
if (!deq)
xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr.\n");
/* Update HC event ring dequeue pointer */
/* Don't clear the EHB bit (which is RW1C) because
* there might be more events to service.
*/
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Write event ring dequeue pointer, preserving EHB bit");
xhci_write_64(xhci, deq & ERST_PTR_MASK, &ir->ir_set->erst_dequeue);
}
static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
__le32 __iomem *addr, int max_caps)
{
u32 temp, port_offset, port_count;
int i;
u8 major_revision, minor_revision, tmp_minor_revision;
struct xhci_hub *rhub;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
struct xhci_port_cap *port_cap;
temp = readl(addr);
major_revision = XHCI_EXT_PORT_MAJOR(temp);
minor_revision = XHCI_EXT_PORT_MINOR(temp);
if (major_revision == 0x03) {
rhub = &xhci->usb3_rhub;
/*
* Some hosts incorrectly use sub-minor version for minor
* version (i.e. 0x02 instead of 0x20 for bcdUSB 0x320 and 0x01
* for bcdUSB 0x310). Since there is no USB release with sub
* minor version 0x301 to 0x309, we can assume that they are
* incorrect and fix it here.
*/
if (minor_revision > 0x00 && minor_revision < 0x10)
minor_revision <<= 4;
/*
* Some zhaoxin's xHCI controller that follow usb3.1 spec
* but only support Gen1.
*/
if (xhci->quirks & XHCI_ZHAOXIN_HOST) {
tmp_minor_revision = minor_revision;
minor_revision = 0;
}
} else if (major_revision <= 0x02) {
rhub = &xhci->usb2_rhub;
} else {
xhci_warn(xhci, "Ignoring unknown port speed, Ext Cap %p, revision = 0x%x\n",
addr, major_revision);
/* Ignoring port protocol we can't understand. FIXME */
return;
}
/* Port offset and count in the third dword, see section 7.2 */
temp = readl(addr + 2);
port_offset = XHCI_EXT_PORT_OFF(temp);
port_count = XHCI_EXT_PORT_COUNT(temp);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Ext Cap %p, port offset = %u, count = %u, revision = 0x%x",
addr, port_offset, port_count, major_revision);
/* Port count includes the current port offset */
if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
/* WTF? "Valid values are ‘1’ to MaxPorts" */
return;
port_cap = &xhci->port_caps[xhci->num_port_caps++];
if (xhci->num_port_caps > max_caps)
return;
port_cap->psi_count = XHCI_EXT_PORT_PSIC(temp);
if (port_cap->psi_count) {
port_cap->psi = kcalloc_node(port_cap->psi_count,
sizeof(*port_cap->psi),
GFP_KERNEL, dev_to_node(dev));
if (!port_cap->psi)
port_cap->psi_count = 0;
port_cap->psi_uid_count++;
for (i = 0; i < port_cap->psi_count; i++) {
port_cap->psi[i] = readl(addr + 4 + i);
/* count unique ID values, two consecutive entries can
* have the same ID if link is assymetric
*/
if (i && (XHCI_EXT_PORT_PSIV(port_cap->psi[i]) !=
XHCI_EXT_PORT_PSIV(port_cap->psi[i - 1])))
port_cap->psi_uid_count++;
if (xhci->quirks & XHCI_ZHAOXIN_HOST &&
major_revision == 0x03 &&
XHCI_EXT_PORT_PSIV(port_cap->psi[i]) >= 5)
minor_revision = tmp_minor_revision;
xhci_dbg(xhci, "PSIV:%d PSIE:%d PLT:%d PFD:%d LP:%d PSIM:%d\n",
XHCI_EXT_PORT_PSIV(port_cap->psi[i]),
XHCI_EXT_PORT_PSIE(port_cap->psi[i]),
XHCI_EXT_PORT_PLT(port_cap->psi[i]),
XHCI_EXT_PORT_PFD(port_cap->psi[i]),
XHCI_EXT_PORT_LP(port_cap->psi[i]),
XHCI_EXT_PORT_PSIM(port_cap->psi[i]));
}
}
rhub->maj_rev = major_revision;
if (rhub->min_rev < minor_revision)
rhub->min_rev = minor_revision;
port_cap->maj_rev = major_revision;
port_cap->min_rev = minor_revision;
/* cache usb2 port capabilities */
if (major_revision < 0x03 && xhci->num_ext_caps < max_caps)
xhci->ext_caps[xhci->num_ext_caps++] = temp;
if ((xhci->hci_version >= 0x100) && (major_revision != 0x03) &&
(temp & XHCI_HLC)) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xHCI 1.0: support USB2 hardware lpm");
xhci->hw_lpm_support = 1;
}
port_offset--;
for (i = port_offset; i < (port_offset + port_count); i++) {
struct xhci_port *hw_port = &xhci->hw_ports[i];
/* Duplicate entry. Ignore the port if the revisions differ. */
if (hw_port->rhub) {
xhci_warn(xhci, "Duplicate port entry, Ext Cap %p, port %u\n", addr, i);
xhci_warn(xhci, "Port was marked as USB %u, duplicated as USB %u\n",
hw_port->rhub->maj_rev, major_revision);
/* Only adjust the roothub port counts if we haven't
* found a similar duplicate.
*/
if (hw_port->rhub != rhub &&
hw_port->hcd_portnum != DUPLICATE_ENTRY) {
hw_port->rhub->num_ports--;
hw_port->hcd_portnum = DUPLICATE_ENTRY;
}
continue;
}
hw_port->rhub = rhub;
hw_port->port_cap = port_cap;
rhub->num_ports++;
}
/* FIXME: Should we disable ports not in the Extended Capabilities? */
}
static void xhci_create_rhub_port_array(struct xhci_hcd *xhci,
struct xhci_hub *rhub, gfp_t flags)
{
int port_index = 0;
int i;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
if (!rhub->num_ports)
return;
rhub->ports = kcalloc_node(rhub->num_ports, sizeof(*rhub->ports),
flags, dev_to_node(dev));
if (!rhub->ports)
return;
for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
if (xhci->hw_ports[i].rhub != rhub ||
xhci->hw_ports[i].hcd_portnum == DUPLICATE_ENTRY)
continue;
xhci->hw_ports[i].hcd_portnum = port_index;
rhub->ports[port_index] = &xhci->hw_ports[i];
port_index++;
if (port_index == rhub->num_ports)
break;
}
}
/*
* Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
* specify what speeds each port is supposed to be. We can't count on the port
* speed bits in the PORTSC register being correct until a device is connected,
* but we need to set up the two fake roothubs with the correct number of USB
* 3.0 and USB 2.0 ports at host controller initialization time.
*/
static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
{
void __iomem *base;
u32 offset;
unsigned int num_ports;
int i, j;
int cap_count = 0;
u32 cap_start;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
xhci->hw_ports = kcalloc_node(num_ports, sizeof(*xhci->hw_ports),
flags, dev_to_node(dev));
if (!xhci->hw_ports)
return -ENOMEM;
for (i = 0; i < num_ports; i++) {
xhci->hw_ports[i].addr = &xhci->op_regs->port_status_base +
NUM_PORT_REGS * i;
xhci->hw_ports[i].hw_portnum = i;
init_completion(&xhci->hw_ports[i].rexit_done);
init_completion(&xhci->hw_ports[i].u3exit_done);
}
xhci->rh_bw = kcalloc_node(num_ports, sizeof(*xhci->rh_bw), flags,
dev_to_node(dev));
if (!xhci->rh_bw)
return -ENOMEM;
for (i = 0; i < num_ports; i++) {
struct xhci_interval_bw_table *bw_table;
INIT_LIST_HEAD(&xhci->rh_bw[i].tts);
bw_table = &xhci->rh_bw[i].bw_table;
for (j = 0; j < XHCI_MAX_INTERVAL; j++)
INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
}
base = &xhci->cap_regs->hc_capbase;
cap_start = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_PROTOCOL);
if (!cap_start) {
xhci_err(xhci, "No Extended Capability registers, unable to set up roothub\n");
return -ENODEV;
}
offset = cap_start;
/* count extended protocol capability entries for later caching */
while (offset) {
cap_count++;
offset = xhci_find_next_ext_cap(base, offset,
XHCI_EXT_CAPS_PROTOCOL);
}
xhci->ext_caps = kcalloc_node(cap_count, sizeof(*xhci->ext_caps),
flags, dev_to_node(dev));
if (!xhci->ext_caps)
return -ENOMEM;
xhci->port_caps = kcalloc_node(cap_count, sizeof(*xhci->port_caps),
flags, dev_to_node(dev));
if (!xhci->port_caps)
return -ENOMEM;
offset = cap_start;
while (offset) {
xhci_add_in_port(xhci, num_ports, base + offset, cap_count);
if (xhci->usb2_rhub.num_ports + xhci->usb3_rhub.num_ports ==
num_ports)
break;
offset = xhci_find_next_ext_cap(base, offset,
XHCI_EXT_CAPS_PROTOCOL);
}
if (xhci->usb2_rhub.num_ports == 0 && xhci->usb3_rhub.num_ports == 0) {
xhci_warn(xhci, "No ports on the roothubs?\n");
return -ENODEV;
}
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Found %u USB 2.0 ports and %u USB 3.0 ports.",
xhci->usb2_rhub.num_ports, xhci->usb3_rhub.num_ports);
/* Place limits on the number of roothub ports so that the hub
* descriptors aren't longer than the USB core will allocate.
*/
if (xhci->usb3_rhub.num_ports > USB_SS_MAXPORTS) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Limiting USB 3.0 roothub ports to %u.",
USB_SS_MAXPORTS);
xhci->usb3_rhub.num_ports = USB_SS_MAXPORTS;
}
if (xhci->usb2_rhub.num_ports > USB_MAXCHILDREN) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Limiting USB 2.0 roothub ports to %u.",
USB_MAXCHILDREN);
xhci->usb2_rhub.num_ports = USB_MAXCHILDREN;
}
if (!xhci->usb2_rhub.num_ports)
xhci_info(xhci, "USB2 root hub has no ports\n");
if (!xhci->usb3_rhub.num_ports)
xhci_info(xhci, "USB3 root hub has no ports\n");
xhci_create_rhub_port_array(xhci, &xhci->usb2_rhub, flags);
xhci_create_rhub_port_array(xhci, &xhci->usb3_rhub, flags);
return 0;
}
static struct xhci_interrupter *
xhci_alloc_interrupter(struct xhci_hcd *xhci, int segs, gfp_t flags)
{
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
struct xhci_interrupter *ir;
unsigned int num_segs = segs;
int ret;
ir = kzalloc_node(sizeof(*ir), flags, dev_to_node(dev));
if (!ir)
return NULL;
/* number of ring segments should be greater than 0 */
if (segs <= 0)
num_segs = min_t(unsigned int, 1 << HCS_ERST_MAX(xhci->hcs_params2),
ERST_MAX_SEGS);
ir->event_ring = xhci_ring_alloc(xhci, num_segs, 1, TYPE_EVENT, 0,
flags);
if (!ir->event_ring) {
xhci_warn(xhci, "Failed to allocate interrupter event ring\n");
kfree(ir);
return NULL;
}
ret = xhci_alloc_erst(xhci, ir->event_ring, &ir->erst, flags);
if (ret) {
xhci_warn(xhci, "Failed to allocate interrupter erst\n");
xhci_ring_free(xhci, ir->event_ring);
kfree(ir);
return NULL;
}
return ir;
}
static int
xhci_add_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir,
unsigned int intr_num)
{
u64 erst_base;
u32 erst_size;
if (intr_num >= xhci->max_interrupters) {
xhci_warn(xhci, "Can't add interrupter %d, max interrupters %d\n",
intr_num, xhci->max_interrupters);
return -EINVAL;
}
if (xhci->interrupters[intr_num]) {
xhci_warn(xhci, "Interrupter %d\n already set up", intr_num);
return -EINVAL;
}
xhci->interrupters[intr_num] = ir;
ir->intr_num = intr_num;
ir->ir_set = &xhci->run_regs->ir_set[intr_num];
/* set ERST count with the number of entries in the segment table */
erst_size = readl(&ir->ir_set->erst_size);
erst_size &= ERST_SIZE_MASK;
erst_size |= ir->event_ring->num_segs;
writel(erst_size, &ir->ir_set->erst_size);
erst_base = xhci_read_64(xhci, &ir->ir_set->erst_base);
erst_base &= ERST_BASE_RSVDP;
erst_base |= ir->erst.erst_dma_addr & ~ERST_BASE_RSVDP;
xhci_write_64(xhci, erst_base, &ir->ir_set->erst_base);
/* Set the event ring dequeue address of this interrupter */
xhci_set_hc_event_deq(xhci, ir);
return 0;
}
struct xhci_interrupter *
xhci_create_secondary_interrupter(struct usb_hcd *hcd, int num_seg)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct xhci_interrupter *ir;
unsigned int i;
int err = -ENOSPC;
if (!xhci->interrupters || xhci->max_interrupters <= 1)
return NULL;
ir = xhci_alloc_interrupter(xhci, num_seg, GFP_KERNEL);
if (!ir)
return NULL;
spin_lock_irq(&xhci->lock);
/* Find available secondary interrupter, interrupter 0 is reserved for primary */
for (i = 1; i < xhci->max_interrupters; i++) {
if (xhci->interrupters[i] == NULL) {
err = xhci_add_interrupter(xhci, ir, i);
break;
}
}
spin_unlock_irq(&xhci->lock);
if (err) {
xhci_warn(xhci, "Failed to add secondary interrupter, max interrupters %d\n",
xhci->max_interrupters);
xhci_free_interrupter(xhci, ir);
return NULL;
}
xhci_dbg(xhci, "Add secondary interrupter %d, max interrupters %d\n",
i, xhci->max_interrupters);
return ir;
}
EXPORT_SYMBOL_GPL(xhci_create_secondary_interrupter);
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
struct xhci_interrupter *ir;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
dma_addr_t dma;
unsigned int val, val2;
u64 val_64;
u32 page_size, temp;
int i;
INIT_LIST_HEAD(&xhci->cmd_list);
/* init command timeout work */
INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout);
init_completion(&xhci->cmd_ring_stop_completion);
page_size = readl(&xhci->op_regs->page_size);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Supported page size register = 0x%x", page_size);
i = ffs(page_size);
if (i < 16)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Supported page size of %iK", (1 << (i+12)) / 1024);
else
xhci_warn(xhci, "WARN: no supported page size\n");
/* Use 4K pages, since that's common and the minimum the HC supports */
xhci->page_shift = 12;
xhci->page_size = 1 << xhci->page_shift;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"HCD page size set to %iK", xhci->page_size / 1024);
/*
* Program the Number of Device Slots Enabled field in the CONFIG
* register with the max value of slots the HC can handle.
*/
val = HCS_MAX_SLOTS(readl(&xhci->cap_regs->hcs_params1));
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// xHC can handle at most %d device slots.", val);
val2 = readl(&xhci->op_regs->config_reg);
val |= (val2 & ~HCS_SLOTS_MASK);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Setting Max device slots reg = 0x%x.", val);
writel(val, &xhci->op_regs->config_reg);
/*
* xHCI section 5.4.6 - Device Context array must be
* "physically contiguous and 64-byte (cache line) aligned".
*/
xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma,
flags);
if (!xhci->dcbaa)
goto fail;
xhci->dcbaa->dma = dma;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Device context base array address = 0x%pad (DMA), %p (virt)",
&xhci->dcbaa->dma, xhci->dcbaa);
xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
/*
* Initialize the ring segment pool. The ring must be a contiguous
* structure comprised of TRBs. The TRBs must be 16 byte aligned,
* however, the command ring segment needs 64-byte aligned segments
* and our use of dma addresses in the trb_address_map radix tree needs
* TRB_SEGMENT_SIZE alignment, so we pick the greater alignment need.
*/
if (xhci->quirks & XHCI_ZHAOXIN_TRB_FETCH)
xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
TRB_SEGMENT_SIZE * 2, TRB_SEGMENT_SIZE * 2, xhci->page_size * 2);
else
xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
TRB_SEGMENT_SIZE, TRB_SEGMENT_SIZE, xhci->page_size);
/* See Table 46 and Note on Figure 55 */
xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
2112, 64, xhci->page_size);
if (!xhci->segment_pool || !xhci->device_pool)
goto fail;
/* Linear stream context arrays don't have any boundary restrictions,
* and only need to be 16-byte aligned.
*/
xhci->small_streams_pool =
dma_pool_create("xHCI 256 byte stream ctx arrays",
dev, SMALL_STREAM_ARRAY_SIZE, 16, 0);
xhci->medium_streams_pool =
dma_pool_create("xHCI 1KB stream ctx arrays",
dev, MEDIUM_STREAM_ARRAY_SIZE, 16, 0);
/* Any stream context array bigger than MEDIUM_STREAM_ARRAY_SIZE
* will be allocated with dma_alloc_coherent()
*/
if (!xhci->small_streams_pool || !xhci->medium_streams_pool)
goto fail;
/* Set up the command ring to have one segments for now. */
xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, 0, flags);
if (!xhci->cmd_ring)
goto fail;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Allocated command ring at %p", xhci->cmd_ring);
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "First segment DMA is 0x%pad",
&xhci->cmd_ring->first_seg->dma);
/* Set the address in the Command Ring Control register */
val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
xhci->cmd_ring->cycle_state;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Setting command ring address to 0x%016llx", val_64);
xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
/* Reserve one command ring TRB for disabling LPM.
* Since the USB core grabs the shared usb_bus bandwidth mutex before
* disabling LPM, we only need to reserve one TRB for all devices.
*/
xhci->cmd_ring_reserved_trbs++;
val = readl(&xhci->cap_regs->db_off);
val &= DBOFF_MASK;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Doorbell array is located at offset 0x%x from cap regs base addr",
val);
xhci->dba = (void __iomem *) xhci->cap_regs + val;
/* Allocate and set up primary interrupter 0 with an event ring. */
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Allocating primary event ring");
xhci->interrupters = kcalloc_node(xhci->max_interrupters, sizeof(*xhci->interrupters),
flags, dev_to_node(dev));
ir = xhci_alloc_interrupter(xhci, 0, flags);
if (!ir)
goto fail;
if (xhci_add_interrupter(xhci, ir, 0))
goto fail;
xhci->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX;
/*
* XXX: Might need to set the Interrupter Moderation Register to
* something other than the default (~1ms minimum between interrupts).
* See section 5.5.1.2.
*/
for (i = 0; i < MAX_HC_SLOTS; i++)
xhci->devs[i] = NULL;
if (scratchpad_alloc(xhci, flags))
goto fail;
if (xhci_setup_port_arrays(xhci, flags))
goto fail;
/* Enable USB 3.0 device notifications for function remote wake, which
* is necessary for allowing USB 3.0 devices to do remote wakeup from
* U3 (device suspend).
*/
temp = readl(&xhci->op_regs->dev_notification);
temp &= ~DEV_NOTE_MASK;
temp |= DEV_NOTE_FWAKE;
writel(temp, &xhci->op_regs->dev_notification);
return 0;
fail:
xhci_halt(xhci);
xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
xhci_mem_cleanup(xhci);
return -ENOMEM;
}