| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2020 Marek Vasut <marex@denx.de> |
| * |
| * Based on tc358764.c by |
| * Andrzej Hajda <a.hajda@samsung.com> |
| * Maciej Purski <m.purski@samsung.com> |
| * |
| * Based on rpi_touchscreen.c by |
| * Eric Anholt <eric@anholt.net> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/of_graph.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/mipi_display.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_of.h> |
| #include <drm/drm_panel.h> |
| #include <drm/drm_print.h> |
| #include <drm/drm_probe_helper.h> |
| |
| /* PPI layer registers */ |
| #define PPI_STARTPPI 0x0104 /* START control bit */ |
| #define PPI_LPTXTIMECNT 0x0114 /* LPTX timing signal */ |
| #define PPI_D0S_ATMR 0x0144 |
| #define PPI_D1S_ATMR 0x0148 |
| #define PPI_D0S_CLRSIPOCOUNT 0x0164 /* Assertion timer for Lane 0 */ |
| #define PPI_D1S_CLRSIPOCOUNT 0x0168 /* Assertion timer for Lane 1 */ |
| #define PPI_START_FUNCTION 1 |
| |
| /* DSI layer registers */ |
| #define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX */ |
| #define DSI_LANEENABLE 0x0210 /* Enables each lane */ |
| #define DSI_RX_START 1 |
| |
| /* LCDC/DPI Host Registers */ |
| #define LCDCTRL 0x0420 |
| |
| /* SPI Master Registers */ |
| #define SPICMR 0x0450 |
| #define SPITCR 0x0454 |
| |
| /* System Controller Registers */ |
| #define SYSCTRL 0x0464 |
| |
| /* System registers */ |
| #define LPX_PERIOD 3 |
| |
| /* Lane enable PPI and DSI register bits */ |
| #define LANEENABLE_CLEN BIT(0) |
| #define LANEENABLE_L0EN BIT(1) |
| #define LANEENABLE_L1EN BIT(2) |
| |
| struct tc358762 { |
| struct device *dev; |
| struct drm_bridge bridge; |
| struct drm_connector connector; |
| struct regulator *regulator; |
| struct drm_bridge *panel_bridge; |
| bool pre_enabled; |
| int error; |
| }; |
| |
| static int tc358762_clear_error(struct tc358762 *ctx) |
| { |
| int ret = ctx->error; |
| |
| ctx->error = 0; |
| return ret; |
| } |
| |
| static void tc358762_write(struct tc358762 *ctx, u16 addr, u32 val) |
| { |
| struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); |
| ssize_t ret; |
| u8 data[6]; |
| |
| if (ctx->error) |
| return; |
| |
| data[0] = addr; |
| data[1] = addr >> 8; |
| data[2] = val; |
| data[3] = val >> 8; |
| data[4] = val >> 16; |
| data[5] = val >> 24; |
| |
| ret = mipi_dsi_generic_write(dsi, data, sizeof(data)); |
| if (ret < 0) |
| ctx->error = ret; |
| } |
| |
| static inline struct tc358762 *bridge_to_tc358762(struct drm_bridge *bridge) |
| { |
| return container_of(bridge, struct tc358762, bridge); |
| } |
| |
| static int tc358762_init(struct tc358762 *ctx) |
| { |
| tc358762_write(ctx, DSI_LANEENABLE, |
| LANEENABLE_L0EN | LANEENABLE_CLEN); |
| tc358762_write(ctx, PPI_D0S_CLRSIPOCOUNT, 5); |
| tc358762_write(ctx, PPI_D1S_CLRSIPOCOUNT, 5); |
| tc358762_write(ctx, PPI_D0S_ATMR, 0); |
| tc358762_write(ctx, PPI_D1S_ATMR, 0); |
| tc358762_write(ctx, PPI_LPTXTIMECNT, LPX_PERIOD); |
| |
| tc358762_write(ctx, SPICMR, 0x00); |
| tc358762_write(ctx, LCDCTRL, 0x00100150); |
| tc358762_write(ctx, SYSCTRL, 0x040f); |
| msleep(100); |
| |
| tc358762_write(ctx, PPI_STARTPPI, PPI_START_FUNCTION); |
| tc358762_write(ctx, DSI_STARTDSI, DSI_RX_START); |
| |
| msleep(100); |
| |
| return tc358762_clear_error(ctx); |
| } |
| |
| static void tc358762_post_disable(struct drm_bridge *bridge) |
| { |
| struct tc358762 *ctx = bridge_to_tc358762(bridge); |
| int ret; |
| |
| /* |
| * The post_disable hook might be called multiple times. |
| * We want to avoid regulator imbalance below. |
| */ |
| if (!ctx->pre_enabled) |
| return; |
| |
| ctx->pre_enabled = false; |
| |
| ret = regulator_disable(ctx->regulator); |
| if (ret < 0) |
| dev_err(ctx->dev, "error disabling regulators (%d)\n", ret); |
| } |
| |
| static void tc358762_pre_enable(struct drm_bridge *bridge) |
| { |
| struct tc358762 *ctx = bridge_to_tc358762(bridge); |
| int ret; |
| |
| ret = regulator_enable(ctx->regulator); |
| if (ret < 0) |
| dev_err(ctx->dev, "error enabling regulators (%d)\n", ret); |
| |
| ret = tc358762_init(ctx); |
| if (ret < 0) |
| dev_err(ctx->dev, "error initializing bridge (%d)\n", ret); |
| |
| ctx->pre_enabled = true; |
| } |
| |
| static int tc358762_attach(struct drm_bridge *bridge, |
| enum drm_bridge_attach_flags flags) |
| { |
| struct tc358762 *ctx = bridge_to_tc358762(bridge); |
| |
| return drm_bridge_attach(bridge->encoder, ctx->panel_bridge, |
| bridge, flags); |
| } |
| |
| static const struct drm_bridge_funcs tc358762_bridge_funcs = { |
| .post_disable = tc358762_post_disable, |
| .pre_enable = tc358762_pre_enable, |
| .attach = tc358762_attach, |
| }; |
| |
| static int tc358762_parse_dt(struct tc358762 *ctx) |
| { |
| struct drm_bridge *panel_bridge; |
| struct device *dev = ctx->dev; |
| struct drm_panel *panel; |
| int ret; |
| |
| ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL); |
| if (ret) |
| return ret; |
| |
| panel_bridge = devm_drm_panel_bridge_add(dev, panel); |
| |
| if (IS_ERR(panel_bridge)) |
| return PTR_ERR(panel_bridge); |
| |
| ctx->panel_bridge = panel_bridge; |
| |
| return 0; |
| } |
| |
| static int tc358762_configure_regulators(struct tc358762 *ctx) |
| { |
| ctx->regulator = devm_regulator_get(ctx->dev, "vddc"); |
| if (IS_ERR(ctx->regulator)) |
| return PTR_ERR(ctx->regulator); |
| |
| return 0; |
| } |
| |
| static int tc358762_probe(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| struct tc358762 *ctx; |
| int ret; |
| |
| ctx = devm_kzalloc(dev, sizeof(struct tc358762), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| mipi_dsi_set_drvdata(dsi, ctx); |
| |
| ctx->dev = dev; |
| ctx->pre_enabled = false; |
| |
| /* TODO: Find out how to get dual-lane mode working */ |
| dsi->lanes = 1; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | |
| MIPI_DSI_MODE_LPM; |
| |
| ret = tc358762_parse_dt(ctx); |
| if (ret < 0) |
| return ret; |
| |
| ret = tc358762_configure_regulators(ctx); |
| if (ret < 0) |
| return ret; |
| |
| ctx->bridge.funcs = &tc358762_bridge_funcs; |
| ctx->bridge.type = DRM_MODE_CONNECTOR_DPI; |
| ctx->bridge.of_node = dev->of_node; |
| |
| drm_bridge_add(&ctx->bridge); |
| |
| ret = mipi_dsi_attach(dsi); |
| if (ret < 0) { |
| drm_bridge_remove(&ctx->bridge); |
| dev_err(dev, "failed to attach dsi\n"); |
| } |
| |
| return ret; |
| } |
| |
| static int tc358762_remove(struct mipi_dsi_device *dsi) |
| { |
| struct tc358762 *ctx = mipi_dsi_get_drvdata(dsi); |
| |
| mipi_dsi_detach(dsi); |
| drm_bridge_remove(&ctx->bridge); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id tc358762_of_match[] = { |
| { .compatible = "toshiba,tc358762" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, tc358762_of_match); |
| |
| static struct mipi_dsi_driver tc358762_driver = { |
| .probe = tc358762_probe, |
| .remove = tc358762_remove, |
| .driver = { |
| .name = "tc358762", |
| .of_match_table = tc358762_of_match, |
| }, |
| }; |
| module_mipi_dsi_driver(tc358762_driver); |
| |
| MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); |
| MODULE_DESCRIPTION("MIPI-DSI based Driver for TC358762 DSI/DPI Bridge"); |
| MODULE_LICENSE("GPL v2"); |