| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // Ingenic JZ47xx IPU driver |
| // |
| // Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net> |
| // Copyright (C) 2020, Daniel Silsby <dansilsby@gmail.com> |
| |
| #include "ingenic-drm.h" |
| #include "ingenic-ipu.h" |
| |
| #include <linux/clk.h> |
| #include <linux/component.h> |
| #include <linux/gcd.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/regmap.h> |
| #include <linux/time.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_damage_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_gem_atomic_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include <drm/drm_plane.h> |
| #include <drm/drm_plane_helper.h> |
| #include <drm/drm_property.h> |
| #include <drm/drm_vblank.h> |
| |
| struct ingenic_ipu; |
| |
| struct soc_info { |
| const u32 *formats; |
| size_t num_formats; |
| bool has_bicubic; |
| bool manual_restart; |
| |
| void (*set_coefs)(struct ingenic_ipu *ipu, unsigned int reg, |
| unsigned int sharpness, bool downscale, |
| unsigned int weight, unsigned int offset); |
| }; |
| |
| struct ingenic_ipu { |
| struct drm_plane plane; |
| struct drm_device *drm; |
| struct device *dev, *master; |
| struct regmap *map; |
| struct clk *clk; |
| const struct soc_info *soc_info; |
| bool clk_enabled; |
| |
| unsigned int num_w, num_h, denom_w, denom_h; |
| |
| dma_addr_t addr_y, addr_u, addr_v; |
| |
| struct drm_property *sharpness_prop; |
| unsigned int sharpness; |
| }; |
| |
| /* Signed 15.16 fixed-point math (for bicubic scaling coefficients) */ |
| #define I2F(i) ((s32)(i) * 65536) |
| #define F2I(f) ((f) / 65536) |
| #define FMUL(fa, fb) ((s32)(((s64)(fa) * (s64)(fb)) / 65536)) |
| #define SHARPNESS_INCR (I2F(-1) / 8) |
| |
| static inline struct ingenic_ipu *plane_to_ingenic_ipu(struct drm_plane *plane) |
| { |
| return container_of(plane, struct ingenic_ipu, plane); |
| } |
| |
| /* |
| * Apply conventional cubic convolution kernel. Both parameters |
| * and return value are 15.16 signed fixed-point. |
| * |
| * @f_a: Sharpness factor, typically in range [-4.0, -0.25]. |
| * A larger magnitude increases perceived sharpness, but going past |
| * -2.0 might cause ringing artifacts to outweigh any improvement. |
| * Nice values on a 320x240 LCD are between -0.75 and -2.0. |
| * |
| * @f_x: Absolute distance in pixels from 'pixel 0' sample position |
| * along horizontal (or vertical) source axis. Range is [0, +2.0]. |
| * |
| * returns: Weight of this pixel within 4-pixel sample group. Range is |
| * [-2.0, +2.0]. For moderate (i.e. > -3.0) sharpness factors, |
| * range is within [-1.0, +1.0]. |
| */ |
| static inline s32 cubic_conv(s32 f_a, s32 f_x) |
| { |
| const s32 f_1 = I2F(1); |
| const s32 f_2 = I2F(2); |
| const s32 f_3 = I2F(3); |
| const s32 f_4 = I2F(4); |
| const s32 f_x2 = FMUL(f_x, f_x); |
| const s32 f_x3 = FMUL(f_x, f_x2); |
| |
| if (f_x <= f_1) |
| return FMUL((f_a + f_2), f_x3) - FMUL((f_a + f_3), f_x2) + f_1; |
| else if (f_x <= f_2) |
| return FMUL(f_a, (f_x3 - 5 * f_x2 + 8 * f_x - f_4)); |
| else |
| return 0; |
| } |
| |
| /* |
| * On entry, "weight" is a coefficient suitable for bilinear mode, |
| * which is converted to a set of four suitable for bicubic mode. |
| * |
| * "weight 512" means all of pixel 0; |
| * "weight 256" means half of pixel 0 and half of pixel 1; |
| * "weight 0" means all of pixel 1; |
| * |
| * "offset" is increment to next source pixel sample location. |
| */ |
| static void jz4760_set_coefs(struct ingenic_ipu *ipu, unsigned int reg, |
| unsigned int sharpness, bool downscale, |
| unsigned int weight, unsigned int offset) |
| { |
| u32 val; |
| s32 w0, w1, w2, w3; /* Pixel weights at X (or Y) offsets -1,0,1,2 */ |
| |
| weight = clamp_val(weight, 0, 512); |
| |
| if (sharpness < 2) { |
| /* |
| * When sharpness setting is 0, emulate nearest-neighbor. |
| * When sharpness setting is 1, emulate bilinear. |
| */ |
| |
| if (sharpness == 0) |
| weight = weight >= 256 ? 512 : 0; |
| w0 = 0; |
| w1 = weight; |
| w2 = 512 - weight; |
| w3 = 0; |
| } else { |
| const s32 f_a = SHARPNESS_INCR * sharpness; |
| const s32 f_h = I2F(1) / 2; /* Round up 0.5 */ |
| |
| /* |
| * Note that always rounding towards +infinity here is intended. |
| * The resulting coefficients match a round-to-nearest-int |
| * double floating-point implementation. |
| */ |
| |
| weight = 512 - weight; |
| w0 = F2I(f_h + 512 * cubic_conv(f_a, I2F(512 + weight) / 512)); |
| w1 = F2I(f_h + 512 * cubic_conv(f_a, I2F(0 + weight) / 512)); |
| w2 = F2I(f_h + 512 * cubic_conv(f_a, I2F(512 - weight) / 512)); |
| w3 = F2I(f_h + 512 * cubic_conv(f_a, I2F(1024 - weight) / 512)); |
| w0 = clamp_val(w0, -1024, 1023); |
| w1 = clamp_val(w1, -1024, 1023); |
| w2 = clamp_val(w2, -1024, 1023); |
| w3 = clamp_val(w3, -1024, 1023); |
| } |
| |
| val = ((w1 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF31_LSB) | |
| ((w0 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF20_LSB); |
| regmap_write(ipu->map, reg, val); |
| |
| val = ((w3 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF31_LSB) | |
| ((w2 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF20_LSB) | |
| ((offset & JZ4760_IPU_RSZ_OFFSET_MASK) << JZ4760_IPU_RSZ_OFFSET_LSB); |
| regmap_write(ipu->map, reg, val); |
| } |
| |
| static void jz4725b_set_coefs(struct ingenic_ipu *ipu, unsigned int reg, |
| unsigned int sharpness, bool downscale, |
| unsigned int weight, unsigned int offset) |
| { |
| u32 val = JZ4725B_IPU_RSZ_LUT_OUT_EN; |
| unsigned int i; |
| |
| weight = clamp_val(weight, 0, 512); |
| |
| if (sharpness == 0) |
| weight = weight >= 256 ? 512 : 0; |
| |
| val |= (weight & JZ4725B_IPU_RSZ_LUT_COEF_MASK) << JZ4725B_IPU_RSZ_LUT_COEF_LSB; |
| if (downscale || !!offset) |
| val |= JZ4725B_IPU_RSZ_LUT_IN_EN; |
| |
| regmap_write(ipu->map, reg, val); |
| |
| if (downscale) { |
| for (i = 1; i < offset; i++) |
| regmap_write(ipu->map, reg, JZ4725B_IPU_RSZ_LUT_IN_EN); |
| } |
| } |
| |
| static void ingenic_ipu_set_downscale_coefs(struct ingenic_ipu *ipu, |
| unsigned int reg, |
| unsigned int num, |
| unsigned int denom) |
| { |
| unsigned int i, offset, weight, weight_num = denom; |
| |
| for (i = 0; i < num; i++) { |
| weight_num = num + (weight_num - num) % (num * 2); |
| weight = 512 - 512 * (weight_num - num) / (num * 2); |
| weight_num += denom * 2; |
| offset = (weight_num - num) / (num * 2); |
| |
| ipu->soc_info->set_coefs(ipu, reg, ipu->sharpness, |
| true, weight, offset); |
| } |
| } |
| |
| static void ingenic_ipu_set_integer_upscale_coefs(struct ingenic_ipu *ipu, |
| unsigned int reg, |
| unsigned int num) |
| { |
| /* |
| * Force nearest-neighbor scaling and use simple math when upscaling |
| * by an integer ratio. It looks better, and fixes a few problem cases. |
| */ |
| unsigned int i; |
| |
| for (i = 0; i < num; i++) |
| ipu->soc_info->set_coefs(ipu, reg, 0, false, 512, i == num - 1); |
| } |
| |
| static void ingenic_ipu_set_upscale_coefs(struct ingenic_ipu *ipu, |
| unsigned int reg, |
| unsigned int num, |
| unsigned int denom) |
| { |
| unsigned int i, offset, weight, weight_num = 0; |
| |
| for (i = 0; i < num; i++) { |
| weight = 512 - 512 * weight_num / num; |
| weight_num += denom; |
| offset = weight_num >= num; |
| |
| if (offset) |
| weight_num -= num; |
| |
| ipu->soc_info->set_coefs(ipu, reg, ipu->sharpness, |
| false, weight, offset); |
| } |
| } |
| |
| static void ingenic_ipu_set_coefs(struct ingenic_ipu *ipu, unsigned int reg, |
| unsigned int num, unsigned int denom) |
| { |
| /* Begin programming the LUT */ |
| regmap_write(ipu->map, reg, -1); |
| |
| if (denom > num) |
| ingenic_ipu_set_downscale_coefs(ipu, reg, num, denom); |
| else if (denom == 1) |
| ingenic_ipu_set_integer_upscale_coefs(ipu, reg, num); |
| else |
| ingenic_ipu_set_upscale_coefs(ipu, reg, num, denom); |
| } |
| |
| static int reduce_fraction(unsigned int *num, unsigned int *denom) |
| { |
| unsigned long d = gcd(*num, *denom); |
| |
| /* The scaling table has only 31 entries */ |
| if (*num > 31 * d) |
| return -EINVAL; |
| |
| *num /= d; |
| *denom /= d; |
| return 0; |
| } |
| |
| static inline bool osd_changed(struct drm_plane_state *state, |
| struct drm_plane_state *oldstate) |
| { |
| return state->src_x != oldstate->src_x || |
| state->src_y != oldstate->src_y || |
| state->src_w != oldstate->src_w || |
| state->src_h != oldstate->src_h || |
| state->crtc_x != oldstate->crtc_x || |
| state->crtc_y != oldstate->crtc_y || |
| state->crtc_w != oldstate->crtc_w || |
| state->crtc_h != oldstate->crtc_h; |
| } |
| |
| static void ingenic_ipu_plane_atomic_update(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane); |
| struct drm_plane_state *newstate = drm_atomic_get_new_plane_state(state, plane); |
| struct drm_plane_state *oldstate = drm_atomic_get_old_plane_state(state, plane); |
| const struct drm_format_info *finfo; |
| u32 ctrl, stride = 0, coef_index = 0, format = 0; |
| bool needs_modeset, upscaling_w, upscaling_h; |
| int err; |
| |
| if (!newstate || !newstate->fb) |
| return; |
| |
| finfo = drm_format_info(newstate->fb->format->format); |
| |
| if (!ipu->clk_enabled) { |
| err = clk_enable(ipu->clk); |
| if (err) { |
| dev_err(ipu->dev, "Unable to enable clock: %d\n", err); |
| return; |
| } |
| |
| ipu->clk_enabled = true; |
| } |
| |
| /* Reset all the registers if needed */ |
| needs_modeset = drm_atomic_crtc_needs_modeset(newstate->crtc->state); |
| if (needs_modeset) { |
| regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_RST); |
| |
| /* Enable the chip */ |
| regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, |
| JZ_IPU_CTRL_CHIP_EN | JZ_IPU_CTRL_LCDC_SEL); |
| } |
| |
| if (ingenic_drm_map_noncoherent(ipu->master)) |
| drm_fb_cma_sync_non_coherent(ipu->drm, oldstate, newstate); |
| |
| /* New addresses will be committed in vblank handler... */ |
| ipu->addr_y = drm_fb_cma_get_gem_addr(newstate->fb, newstate, 0); |
| if (finfo->num_planes > 1) |
| ipu->addr_u = drm_fb_cma_get_gem_addr(newstate->fb, newstate, |
| 1); |
| if (finfo->num_planes > 2) |
| ipu->addr_v = drm_fb_cma_get_gem_addr(newstate->fb, newstate, |
| 2); |
| |
| if (!needs_modeset) |
| return; |
| |
| /* Or right here if we're doing a full modeset. */ |
| regmap_write(ipu->map, JZ_REG_IPU_Y_ADDR, ipu->addr_y); |
| regmap_write(ipu->map, JZ_REG_IPU_U_ADDR, ipu->addr_u); |
| regmap_write(ipu->map, JZ_REG_IPU_V_ADDR, ipu->addr_v); |
| |
| if (finfo->num_planes == 1) |
| regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_SPKG_SEL); |
| |
| ingenic_drm_plane_config(ipu->master, plane, DRM_FORMAT_XRGB8888); |
| |
| /* Set the input height/width/strides */ |
| if (finfo->num_planes > 2) |
| stride = ((newstate->src_w >> 16) * finfo->cpp[2] / finfo->hsub) |
| << JZ_IPU_UV_STRIDE_V_LSB; |
| |
| if (finfo->num_planes > 1) |
| stride |= ((newstate->src_w >> 16) * finfo->cpp[1] / finfo->hsub) |
| << JZ_IPU_UV_STRIDE_U_LSB; |
| |
| regmap_write(ipu->map, JZ_REG_IPU_UV_STRIDE, stride); |
| |
| stride = ((newstate->src_w >> 16) * finfo->cpp[0]) << JZ_IPU_Y_STRIDE_Y_LSB; |
| regmap_write(ipu->map, JZ_REG_IPU_Y_STRIDE, stride); |
| |
| regmap_write(ipu->map, JZ_REG_IPU_IN_GS, |
| (stride << JZ_IPU_IN_GS_W_LSB) | |
| ((newstate->src_h >> 16) << JZ_IPU_IN_GS_H_LSB)); |
| |
| switch (finfo->format) { |
| case DRM_FORMAT_XRGB1555: |
| format = JZ_IPU_D_FMT_IN_FMT_RGB555 | |
| JZ_IPU_D_FMT_RGB_OUT_OFT_RGB; |
| break; |
| case DRM_FORMAT_XBGR1555: |
| format = JZ_IPU_D_FMT_IN_FMT_RGB555 | |
| JZ_IPU_D_FMT_RGB_OUT_OFT_BGR; |
| break; |
| case DRM_FORMAT_RGB565: |
| format = JZ_IPU_D_FMT_IN_FMT_RGB565 | |
| JZ_IPU_D_FMT_RGB_OUT_OFT_RGB; |
| break; |
| case DRM_FORMAT_BGR565: |
| format = JZ_IPU_D_FMT_IN_FMT_RGB565 | |
| JZ_IPU_D_FMT_RGB_OUT_OFT_BGR; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| case DRM_FORMAT_XYUV8888: |
| format = JZ_IPU_D_FMT_IN_FMT_RGB888 | |
| JZ_IPU_D_FMT_RGB_OUT_OFT_RGB; |
| break; |
| case DRM_FORMAT_XBGR8888: |
| format = JZ_IPU_D_FMT_IN_FMT_RGB888 | |
| JZ_IPU_D_FMT_RGB_OUT_OFT_BGR; |
| break; |
| case DRM_FORMAT_YUYV: |
| format = JZ_IPU_D_FMT_IN_FMT_YUV422 | |
| JZ_IPU_D_FMT_YUV_VY1UY0; |
| break; |
| case DRM_FORMAT_YVYU: |
| format = JZ_IPU_D_FMT_IN_FMT_YUV422 | |
| JZ_IPU_D_FMT_YUV_UY1VY0; |
| break; |
| case DRM_FORMAT_UYVY: |
| format = JZ_IPU_D_FMT_IN_FMT_YUV422 | |
| JZ_IPU_D_FMT_YUV_Y1VY0U; |
| break; |
| case DRM_FORMAT_VYUY: |
| format = JZ_IPU_D_FMT_IN_FMT_YUV422 | |
| JZ_IPU_D_FMT_YUV_Y1UY0V; |
| break; |
| case DRM_FORMAT_YUV411: |
| format = JZ_IPU_D_FMT_IN_FMT_YUV411; |
| break; |
| case DRM_FORMAT_YUV420: |
| format = JZ_IPU_D_FMT_IN_FMT_YUV420; |
| break; |
| case DRM_FORMAT_YUV422: |
| format = JZ_IPU_D_FMT_IN_FMT_YUV422; |
| break; |
| case DRM_FORMAT_YUV444: |
| format = JZ_IPU_D_FMT_IN_FMT_YUV444; |
| break; |
| default: |
| WARN_ONCE(1, "Unsupported format"); |
| break; |
| } |
| |
| /* Fix output to RGB888 */ |
| format |= JZ_IPU_D_FMT_OUT_FMT_RGB888; |
| |
| /* Set pixel format */ |
| regmap_write(ipu->map, JZ_REG_IPU_D_FMT, format); |
| |
| /* Set the output height/width/stride */ |
| regmap_write(ipu->map, JZ_REG_IPU_OUT_GS, |
| ((newstate->crtc_w * 4) << JZ_IPU_OUT_GS_W_LSB) |
| | newstate->crtc_h << JZ_IPU_OUT_GS_H_LSB); |
| regmap_write(ipu->map, JZ_REG_IPU_OUT_STRIDE, newstate->crtc_w * 4); |
| |
| if (finfo->is_yuv) { |
| regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_CSC_EN); |
| |
| /* |
| * Offsets for Chroma/Luma. |
| * y = source Y - LUMA, |
| * u = source Cb - CHROMA, |
| * v = source Cr - CHROMA |
| */ |
| regmap_write(ipu->map, JZ_REG_IPU_CSC_OFFSET, |
| 128 << JZ_IPU_CSC_OFFSET_CHROMA_LSB | |
| 0 << JZ_IPU_CSC_OFFSET_LUMA_LSB); |
| |
| /* |
| * YUV422 to RGB conversion table. |
| * R = C0 / 0x400 * y + C1 / 0x400 * v |
| * G = C0 / 0x400 * y - C2 / 0x400 * u - C3 / 0x400 * v |
| * B = C0 / 0x400 * y + C4 / 0x400 * u |
| */ |
| regmap_write(ipu->map, JZ_REG_IPU_CSC_C0_COEF, 0x4a8); |
| regmap_write(ipu->map, JZ_REG_IPU_CSC_C1_COEF, 0x662); |
| regmap_write(ipu->map, JZ_REG_IPU_CSC_C2_COEF, 0x191); |
| regmap_write(ipu->map, JZ_REG_IPU_CSC_C3_COEF, 0x341); |
| regmap_write(ipu->map, JZ_REG_IPU_CSC_C4_COEF, 0x811); |
| } |
| |
| ctrl = 0; |
| |
| /* |
| * Must set ZOOM_SEL before programming bicubic LUTs. |
| * If the IPU supports bicubic, we enable it unconditionally, since it |
| * can do anything bilinear can and more. |
| */ |
| if (ipu->soc_info->has_bicubic) |
| ctrl |= JZ_IPU_CTRL_ZOOM_SEL; |
| |
| upscaling_w = ipu->num_w > ipu->denom_w; |
| if (upscaling_w) |
| ctrl |= JZ_IPU_CTRL_HSCALE; |
| |
| if (ipu->num_w != 1 || ipu->denom_w != 1) { |
| if (!ipu->soc_info->has_bicubic && !upscaling_w) |
| coef_index |= (ipu->denom_w - 1) << 16; |
| else |
| coef_index |= (ipu->num_w - 1) << 16; |
| ctrl |= JZ_IPU_CTRL_HRSZ_EN; |
| } |
| |
| upscaling_h = ipu->num_h > ipu->denom_h; |
| if (upscaling_h) |
| ctrl |= JZ_IPU_CTRL_VSCALE; |
| |
| if (ipu->num_h != 1 || ipu->denom_h != 1) { |
| if (!ipu->soc_info->has_bicubic && !upscaling_h) |
| coef_index |= ipu->denom_h - 1; |
| else |
| coef_index |= ipu->num_h - 1; |
| ctrl |= JZ_IPU_CTRL_VRSZ_EN; |
| } |
| |
| regmap_update_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_ZOOM_SEL | |
| JZ_IPU_CTRL_HRSZ_EN | JZ_IPU_CTRL_VRSZ_EN | |
| JZ_IPU_CTRL_HSCALE | JZ_IPU_CTRL_VSCALE, ctrl); |
| |
| /* Set the LUT index register */ |
| regmap_write(ipu->map, JZ_REG_IPU_RSZ_COEF_INDEX, coef_index); |
| |
| if (ipu->num_w != 1 || ipu->denom_w != 1) |
| ingenic_ipu_set_coefs(ipu, JZ_REG_IPU_HRSZ_COEF_LUT, |
| ipu->num_w, ipu->denom_w); |
| |
| if (ipu->num_h != 1 || ipu->denom_h != 1) |
| ingenic_ipu_set_coefs(ipu, JZ_REG_IPU_VRSZ_COEF_LUT, |
| ipu->num_h, ipu->denom_h); |
| |
| /* Clear STATUS register */ |
| regmap_write(ipu->map, JZ_REG_IPU_STATUS, 0); |
| |
| /* Start IPU */ |
| regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, |
| JZ_IPU_CTRL_RUN | JZ_IPU_CTRL_FM_IRQ_EN); |
| |
| dev_dbg(ipu->dev, "Scaling %ux%u to %ux%u (%u:%u horiz, %u:%u vert)\n", |
| newstate->src_w >> 16, newstate->src_h >> 16, |
| newstate->crtc_w, newstate->crtc_h, |
| ipu->num_w, ipu->denom_w, ipu->num_h, ipu->denom_h); |
| } |
| |
| static int ingenic_ipu_plane_atomic_check(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, |
| plane); |
| struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| unsigned int num_w, denom_w, num_h, denom_h, xres, yres, max_w, max_h; |
| struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane); |
| struct drm_crtc *crtc = new_plane_state->crtc ?: old_plane_state->crtc; |
| struct drm_crtc_state *crtc_state; |
| |
| if (!crtc) |
| return 0; |
| |
| crtc_state = drm_atomic_get_existing_crtc_state(state, crtc); |
| if (WARN_ON(!crtc_state)) |
| return -EINVAL; |
| |
| /* Request a full modeset if we are enabling or disabling the IPU. */ |
| if (!old_plane_state->crtc ^ !new_plane_state->crtc) |
| crtc_state->mode_changed = true; |
| |
| if (!new_plane_state->crtc || |
| !crtc_state->mode.hdisplay || !crtc_state->mode.vdisplay) |
| goto out_check_damage; |
| |
| /* Plane must be fully visible */ |
| if (new_plane_state->crtc_x < 0 || new_plane_state->crtc_y < 0 || |
| new_plane_state->crtc_x + new_plane_state->crtc_w > crtc_state->mode.hdisplay || |
| new_plane_state->crtc_y + new_plane_state->crtc_h > crtc_state->mode.vdisplay) |
| return -EINVAL; |
| |
| /* Minimum size is 4x4 */ |
| if ((new_plane_state->src_w >> 16) < 4 || (new_plane_state->src_h >> 16) < 4) |
| return -EINVAL; |
| |
| /* Input and output lines must have an even number of pixels. */ |
| if (((new_plane_state->src_w >> 16) & 1) || (new_plane_state->crtc_w & 1)) |
| return -EINVAL; |
| |
| if (!osd_changed(new_plane_state, old_plane_state)) |
| goto out_check_damage; |
| |
| crtc_state->mode_changed = true; |
| |
| xres = new_plane_state->src_w >> 16; |
| yres = new_plane_state->src_h >> 16; |
| |
| /* |
| * Increase the scaled image's theorical width/height until we find a |
| * configuration that has valid scaling coefficients, up to 102% of the |
| * screen's resolution. This makes sure that we can scale from almost |
| * every resolution possible at the cost of a very small distorsion. |
| * The CRTC_W / CRTC_H are not modified. |
| */ |
| max_w = crtc_state->mode.hdisplay * 102 / 100; |
| max_h = crtc_state->mode.vdisplay * 102 / 100; |
| |
| for (denom_w = xres, num_w = new_plane_state->crtc_w; num_w <= max_w; num_w++) |
| if (!reduce_fraction(&num_w, &denom_w)) |
| break; |
| if (num_w > max_w) |
| return -EINVAL; |
| |
| for (denom_h = yres, num_h = new_plane_state->crtc_h; num_h <= max_h; num_h++) |
| if (!reduce_fraction(&num_h, &denom_h)) |
| break; |
| if (num_h > max_h) |
| return -EINVAL; |
| |
| ipu->num_w = num_w; |
| ipu->num_h = num_h; |
| ipu->denom_w = denom_w; |
| ipu->denom_h = denom_h; |
| |
| out_check_damage: |
| if (ingenic_drm_map_noncoherent(ipu->master)) |
| drm_atomic_helper_check_plane_damage(state, new_plane_state); |
| |
| return 0; |
| } |
| |
| static void ingenic_ipu_plane_atomic_disable(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane); |
| |
| regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_STOP); |
| regmap_clear_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_CHIP_EN); |
| |
| ingenic_drm_plane_disable(ipu->master, plane); |
| |
| if (ipu->clk_enabled) { |
| clk_disable(ipu->clk); |
| ipu->clk_enabled = false; |
| } |
| } |
| |
| static const struct drm_plane_helper_funcs ingenic_ipu_plane_helper_funcs = { |
| .atomic_update = ingenic_ipu_plane_atomic_update, |
| .atomic_check = ingenic_ipu_plane_atomic_check, |
| .atomic_disable = ingenic_ipu_plane_atomic_disable, |
| }; |
| |
| static int |
| ingenic_ipu_plane_atomic_get_property(struct drm_plane *plane, |
| const struct drm_plane_state *state, |
| struct drm_property *property, u64 *val) |
| { |
| struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane); |
| |
| if (property != ipu->sharpness_prop) |
| return -EINVAL; |
| |
| *val = ipu->sharpness; |
| |
| return 0; |
| } |
| |
| static int |
| ingenic_ipu_plane_atomic_set_property(struct drm_plane *plane, |
| struct drm_plane_state *state, |
| struct drm_property *property, u64 val) |
| { |
| struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane); |
| struct drm_crtc_state *crtc_state; |
| |
| if (property != ipu->sharpness_prop) |
| return -EINVAL; |
| |
| ipu->sharpness = val; |
| |
| if (state->crtc) { |
| crtc_state = drm_atomic_get_existing_crtc_state(state->state, state->crtc); |
| if (WARN_ON(!crtc_state)) |
| return -EINVAL; |
| |
| crtc_state->mode_changed = true; |
| } |
| |
| return 0; |
| } |
| |
| static const struct drm_plane_funcs ingenic_ipu_plane_funcs = { |
| .update_plane = drm_atomic_helper_update_plane, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .reset = drm_atomic_helper_plane_reset, |
| .destroy = drm_plane_cleanup, |
| |
| .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, |
| |
| .atomic_get_property = ingenic_ipu_plane_atomic_get_property, |
| .atomic_set_property = ingenic_ipu_plane_atomic_set_property, |
| }; |
| |
| static irqreturn_t ingenic_ipu_irq_handler(int irq, void *arg) |
| { |
| struct ingenic_ipu *ipu = arg; |
| struct drm_crtc *crtc = drm_crtc_from_index(ipu->drm, 0); |
| unsigned int dummy; |
| |
| /* dummy read allows CPU to reconfigure IPU */ |
| if (ipu->soc_info->manual_restart) |
| regmap_read(ipu->map, JZ_REG_IPU_STATUS, &dummy); |
| |
| /* ACK interrupt */ |
| regmap_write(ipu->map, JZ_REG_IPU_STATUS, 0); |
| |
| /* Set previously cached addresses */ |
| regmap_write(ipu->map, JZ_REG_IPU_Y_ADDR, ipu->addr_y); |
| regmap_write(ipu->map, JZ_REG_IPU_U_ADDR, ipu->addr_u); |
| regmap_write(ipu->map, JZ_REG_IPU_V_ADDR, ipu->addr_v); |
| |
| /* Run IPU for the new frame */ |
| if (ipu->soc_info->manual_restart) |
| regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_RUN); |
| |
| drm_crtc_handle_vblank(crtc); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct regmap_config ingenic_ipu_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| |
| .max_register = JZ_REG_IPU_OUT_PHY_T_ADDR, |
| }; |
| |
| static int ingenic_ipu_bind(struct device *dev, struct device *master, void *d) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| const struct soc_info *soc_info; |
| struct drm_device *drm = d; |
| struct drm_plane *plane; |
| struct ingenic_ipu *ipu; |
| void __iomem *base; |
| unsigned int sharpness_max; |
| int err, irq; |
| |
| ipu = devm_kzalloc(dev, sizeof(*ipu), GFP_KERNEL); |
| if (!ipu) |
| return -ENOMEM; |
| |
| soc_info = of_device_get_match_data(dev); |
| if (!soc_info) { |
| dev_err(dev, "Missing platform data\n"); |
| return -EINVAL; |
| } |
| |
| ipu->dev = dev; |
| ipu->drm = drm; |
| ipu->master = master; |
| ipu->soc_info = soc_info; |
| |
| base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(base)) { |
| dev_err(dev, "Failed to get memory resource\n"); |
| return PTR_ERR(base); |
| } |
| |
| ipu->map = devm_regmap_init_mmio(dev, base, &ingenic_ipu_regmap_config); |
| if (IS_ERR(ipu->map)) { |
| dev_err(dev, "Failed to create regmap\n"); |
| return PTR_ERR(ipu->map); |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| ipu->clk = devm_clk_get(dev, "ipu"); |
| if (IS_ERR(ipu->clk)) { |
| dev_err(dev, "Failed to get pixel clock\n"); |
| return PTR_ERR(ipu->clk); |
| } |
| |
| err = devm_request_irq(dev, irq, ingenic_ipu_irq_handler, 0, |
| dev_name(dev), ipu); |
| if (err) { |
| dev_err(dev, "Unable to request IRQ\n"); |
| return err; |
| } |
| |
| plane = &ipu->plane; |
| dev_set_drvdata(dev, plane); |
| |
| drm_plane_helper_add(plane, &ingenic_ipu_plane_helper_funcs); |
| |
| err = drm_universal_plane_init(drm, plane, 1, &ingenic_ipu_plane_funcs, |
| soc_info->formats, soc_info->num_formats, |
| NULL, DRM_PLANE_TYPE_OVERLAY, NULL); |
| if (err) { |
| dev_err(dev, "Failed to init plane: %i\n", err); |
| return err; |
| } |
| |
| if (ingenic_drm_map_noncoherent(master)) |
| drm_plane_enable_fb_damage_clips(plane); |
| |
| /* |
| * Sharpness settings range is [0,32] |
| * 0 : nearest-neighbor |
| * 1 : bilinear |
| * 2 .. 32 : bicubic (translated to sharpness factor -0.25 .. -4.0) |
| */ |
| sharpness_max = soc_info->has_bicubic ? 32 : 1; |
| ipu->sharpness_prop = drm_property_create_range(drm, 0, "sharpness", |
| 0, sharpness_max); |
| if (!ipu->sharpness_prop) { |
| dev_err(dev, "Unable to create sharpness property\n"); |
| return -ENOMEM; |
| } |
| |
| /* Default sharpness factor: -0.125 * 8 = -1.0 */ |
| ipu->sharpness = soc_info->has_bicubic ? 8 : 1; |
| drm_object_attach_property(&plane->base, ipu->sharpness_prop, |
| ipu->sharpness); |
| |
| err = clk_prepare(ipu->clk); |
| if (err) { |
| dev_err(dev, "Unable to prepare clock\n"); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void ingenic_ipu_unbind(struct device *dev, |
| struct device *master, void *d) |
| { |
| struct ingenic_ipu *ipu = dev_get_drvdata(dev); |
| |
| clk_unprepare(ipu->clk); |
| } |
| |
| static const struct component_ops ingenic_ipu_ops = { |
| .bind = ingenic_ipu_bind, |
| .unbind = ingenic_ipu_unbind, |
| }; |
| |
| static int ingenic_ipu_probe(struct platform_device *pdev) |
| { |
| return component_add(&pdev->dev, &ingenic_ipu_ops); |
| } |
| |
| static int ingenic_ipu_remove(struct platform_device *pdev) |
| { |
| component_del(&pdev->dev, &ingenic_ipu_ops); |
| return 0; |
| } |
| |
| static const u32 jz4725b_ipu_formats[] = { |
| /* |
| * While officially supported, packed YUV 4:2:2 formats can cause |
| * random hardware crashes on JZ4725B under certain circumstances. |
| * It seems to happen with some specific resize ratios. |
| * Until a proper workaround or fix is found, disable these formats. |
| DRM_FORMAT_YUYV, |
| DRM_FORMAT_YVYU, |
| DRM_FORMAT_UYVY, |
| DRM_FORMAT_VYUY, |
| */ |
| DRM_FORMAT_YUV411, |
| DRM_FORMAT_YUV420, |
| DRM_FORMAT_YUV422, |
| DRM_FORMAT_YUV444, |
| }; |
| |
| static const struct soc_info jz4725b_soc_info = { |
| .formats = jz4725b_ipu_formats, |
| .num_formats = ARRAY_SIZE(jz4725b_ipu_formats), |
| .has_bicubic = false, |
| .manual_restart = true, |
| .set_coefs = jz4725b_set_coefs, |
| }; |
| |
| static const u32 jz4760_ipu_formats[] = { |
| DRM_FORMAT_XRGB1555, |
| DRM_FORMAT_XBGR1555, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_BGR565, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_XBGR8888, |
| DRM_FORMAT_YUYV, |
| DRM_FORMAT_YVYU, |
| DRM_FORMAT_UYVY, |
| DRM_FORMAT_VYUY, |
| DRM_FORMAT_YUV411, |
| DRM_FORMAT_YUV420, |
| DRM_FORMAT_YUV422, |
| DRM_FORMAT_YUV444, |
| DRM_FORMAT_XYUV8888, |
| }; |
| |
| static const struct soc_info jz4760_soc_info = { |
| .formats = jz4760_ipu_formats, |
| .num_formats = ARRAY_SIZE(jz4760_ipu_formats), |
| .has_bicubic = true, |
| .manual_restart = false, |
| .set_coefs = jz4760_set_coefs, |
| }; |
| |
| static const struct of_device_id ingenic_ipu_of_match[] = { |
| { .compatible = "ingenic,jz4725b-ipu", .data = &jz4725b_soc_info }, |
| { .compatible = "ingenic,jz4760-ipu", .data = &jz4760_soc_info }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, ingenic_ipu_of_match); |
| |
| static struct platform_driver ingenic_ipu_driver = { |
| .driver = { |
| .name = "ingenic-ipu", |
| .of_match_table = ingenic_ipu_of_match, |
| }, |
| .probe = ingenic_ipu_probe, |
| .remove = ingenic_ipu_remove, |
| }; |
| |
| struct platform_driver *ingenic_ipu_driver_ptr = &ingenic_ipu_driver; |