| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2004 Koninklijke Philips Electronics NV |
| * |
| * Conversion to platform driver and DT: |
| * Copyright 2014 Linaro Ltd. |
| * |
| * 14/04/2005 Initial version, colin.king@philips.com |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/of_pci.h> |
| #include <linux/of_platform.h> |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| |
| #include "../pci.h" |
| |
| static void __iomem *versatile_pci_base; |
| static void __iomem *versatile_cfg_base[2]; |
| |
| #define PCI_IMAP(m) (versatile_pci_base + ((m) * 4)) |
| #define PCI_SMAP(m) (versatile_pci_base + 0x14 + ((m) * 4)) |
| #define PCI_SELFID (versatile_pci_base + 0xc) |
| |
| #define VP_PCI_DEVICE_ID 0x030010ee |
| #define VP_PCI_CLASS_ID 0x0b400000 |
| |
| static u32 pci_slot_ignore; |
| |
| static int __init versatile_pci_slot_ignore(char *str) |
| { |
| int retval; |
| int slot; |
| |
| while ((retval = get_option(&str, &slot))) { |
| if ((slot < 0) || (slot > 31)) |
| pr_err("Illegal slot value: %d\n", slot); |
| else |
| pci_slot_ignore |= (1 << slot); |
| } |
| return 1; |
| } |
| __setup("pci_slot_ignore=", versatile_pci_slot_ignore); |
| |
| |
| static void __iomem *versatile_map_bus(struct pci_bus *bus, |
| unsigned int devfn, int offset) |
| { |
| unsigned int busnr = bus->number; |
| |
| if (pci_slot_ignore & (1 << PCI_SLOT(devfn))) |
| return NULL; |
| |
| return versatile_cfg_base[1] + ((busnr << 16) | (devfn << 8) | offset); |
| } |
| |
| static struct pci_ops pci_versatile_ops = { |
| .map_bus = versatile_map_bus, |
| .read = pci_generic_config_read32, |
| .write = pci_generic_config_write, |
| }; |
| |
| static int versatile_pci_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct resource_entry *entry; |
| int i, myslot = -1, mem = 1; |
| u32 val; |
| void __iomem *local_pci_cfg_base; |
| struct pci_host_bridge *bridge; |
| |
| bridge = devm_pci_alloc_host_bridge(dev, 0); |
| if (!bridge) |
| return -ENOMEM; |
| |
| versatile_pci_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(versatile_pci_base)) |
| return PTR_ERR(versatile_pci_base); |
| |
| versatile_cfg_base[0] = devm_platform_ioremap_resource(pdev, 1); |
| if (IS_ERR(versatile_cfg_base[0])) |
| return PTR_ERR(versatile_cfg_base[0]); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 2); |
| versatile_cfg_base[1] = devm_pci_remap_cfg_resource(dev, res); |
| if (IS_ERR(versatile_cfg_base[1])) |
| return PTR_ERR(versatile_cfg_base[1]); |
| |
| resource_list_for_each_entry(entry, &bridge->windows) { |
| if (resource_type(entry->res) == IORESOURCE_MEM) { |
| writel(entry->res->start >> 28, PCI_IMAP(mem)); |
| writel(__pa(PAGE_OFFSET) >> 28, PCI_SMAP(mem)); |
| mem++; |
| } |
| } |
| |
| /* |
| * We need to discover the PCI core first to configure itself |
| * before the main PCI probing is performed |
| */ |
| for (i = 0; i < 32; i++) { |
| if ((readl(versatile_cfg_base[0] + (i << 11) + PCI_VENDOR_ID) == VP_PCI_DEVICE_ID) && |
| (readl(versatile_cfg_base[0] + (i << 11) + PCI_CLASS_REVISION) == VP_PCI_CLASS_ID)) { |
| myslot = i; |
| break; |
| } |
| } |
| if (myslot == -1) { |
| dev_err(dev, "Cannot find PCI core!\n"); |
| return -EIO; |
| } |
| /* |
| * Do not to map Versatile FPGA PCI device into memory space |
| */ |
| pci_slot_ignore |= (1 << myslot); |
| |
| dev_info(dev, "PCI core found (slot %d)\n", myslot); |
| |
| writel(myslot, PCI_SELFID); |
| local_pci_cfg_base = versatile_cfg_base[1] + (myslot << 11); |
| |
| val = readl(local_pci_cfg_base + PCI_COMMAND); |
| val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; |
| writel(val, local_pci_cfg_base + PCI_COMMAND); |
| |
| /* |
| * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM |
| */ |
| writel(__pa(PAGE_OFFSET), local_pci_cfg_base + PCI_BASE_ADDRESS_0); |
| writel(__pa(PAGE_OFFSET), local_pci_cfg_base + PCI_BASE_ADDRESS_1); |
| writel(__pa(PAGE_OFFSET), local_pci_cfg_base + PCI_BASE_ADDRESS_2); |
| |
| /* |
| * For many years the kernel and QEMU were symbiotically buggy |
| * in that they both assumed the same broken IRQ mapping. |
| * QEMU therefore attempts to auto-detect old broken kernels |
| * so that they still work on newer QEMU as they did on old |
| * QEMU. Since we now use the correct (ie matching-hardware) |
| * IRQ mapping we write a definitely different value to a |
| * PCI_INTERRUPT_LINE register to tell QEMU that we expect |
| * real hardware behaviour and it need not be backwards |
| * compatible for us. This write is harmless on real hardware. |
| */ |
| writel(0, versatile_cfg_base[0] + PCI_INTERRUPT_LINE); |
| |
| pci_add_flags(PCI_REASSIGN_ALL_BUS); |
| |
| bridge->ops = &pci_versatile_ops; |
| |
| return pci_host_probe(bridge); |
| } |
| |
| static const struct of_device_id versatile_pci_of_match[] = { |
| { .compatible = "arm,versatile-pci", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, versatile_pci_of_match); |
| |
| static struct platform_driver versatile_pci_driver = { |
| .driver = { |
| .name = "versatile-pci", |
| .of_match_table = versatile_pci_of_match, |
| .suppress_bind_attrs = true, |
| }, |
| .probe = versatile_pci_probe, |
| }; |
| module_platform_driver(versatile_pci_driver); |
| |
| MODULE_DESCRIPTION("Versatile PCI driver"); |
| MODULE_LICENSE("GPL v2"); |