| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * linux/arch/alpha/kernel/core_irongate.c |
| * |
| * Based on code written by David A. Rusling (david.rusling@reo.mts.dec.com). |
| * |
| * Copyright (C) 1999 Alpha Processor, Inc., |
| * (David Daniel, Stig Telfer, Soohoon Lee) |
| * |
| * Code common to all IRONGATE core logic chips. |
| */ |
| |
| #define __EXTERN_INLINE inline |
| #include <asm/io.h> |
| #include <asm/core_irongate.h> |
| #undef __EXTERN_INLINE |
| |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/sched.h> |
| #include <linux/init.h> |
| #include <linux/initrd.h> |
| #include <linux/memblock.h> |
| |
| #include <asm/ptrace.h> |
| #include <asm/cacheflush.h> |
| #include <asm/tlbflush.h> |
| |
| #include "proto.h" |
| #include "pci_impl.h" |
| |
| /* |
| * BIOS32-style PCI interface: |
| */ |
| |
| #define DEBUG_CONFIG 0 |
| |
| #if DEBUG_CONFIG |
| # define DBG_CFG(args) printk args |
| #else |
| # define DBG_CFG(args) |
| #endif |
| |
| igcsr32 *IronECC; |
| |
| /* |
| * Given a bus, device, and function number, compute resulting |
| * configuration space address accordingly. It is therefore not safe |
| * to have concurrent invocations to configuration space access |
| * routines, but there really shouldn't be any need for this. |
| * |
| * addr[31:24] reserved |
| * addr[23:16] bus number (8 bits = 128 possible buses) |
| * addr[15:11] Device number (5 bits) |
| * addr[10: 8] function number |
| * addr[ 7: 2] register number |
| * |
| * For IRONGATE: |
| * if (bus = addr[23:16]) == 0 |
| * then |
| * type 0 config cycle: |
| * addr_on_pci[31:11] = id selection for device = addr[15:11] |
| * addr_on_pci[10: 2] = addr[10: 2] ??? |
| * addr_on_pci[ 1: 0] = 00 |
| * else |
| * type 1 config cycle (pass on with no decoding): |
| * addr_on_pci[31:24] = 0 |
| * addr_on_pci[23: 2] = addr[23: 2] |
| * addr_on_pci[ 1: 0] = 01 |
| * fi |
| * |
| * Notes: |
| * The function number selects which function of a multi-function device |
| * (e.g., SCSI and Ethernet). |
| * |
| * The register selects a DWORD (32 bit) register offset. Hence it |
| * doesn't get shifted by 2 bits as we want to "drop" the bottom two |
| * bits. |
| */ |
| |
| static int |
| mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where, |
| unsigned long *pci_addr, unsigned char *type1) |
| { |
| unsigned long addr; |
| u8 bus = pbus->number; |
| |
| DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, " |
| "pci_addr=0x%p, type1=0x%p)\n", |
| bus, device_fn, where, pci_addr, type1)); |
| |
| *type1 = (bus != 0); |
| |
| addr = (bus << 16) | (device_fn << 8) | where; |
| addr |= IRONGATE_CONF; |
| |
| *pci_addr = addr; |
| DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr)); |
| return 0; |
| } |
| |
| static int |
| irongate_read_config(struct pci_bus *bus, unsigned int devfn, int where, |
| int size, u32 *value) |
| { |
| unsigned long addr; |
| unsigned char type1; |
| |
| if (mk_conf_addr(bus, devfn, where, &addr, &type1)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| switch (size) { |
| case 1: |
| *value = __kernel_ldbu(*(vucp)addr); |
| break; |
| case 2: |
| *value = __kernel_ldwu(*(vusp)addr); |
| break; |
| case 4: |
| *value = *(vuip)addr; |
| break; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int |
| irongate_write_config(struct pci_bus *bus, unsigned int devfn, int where, |
| int size, u32 value) |
| { |
| unsigned long addr; |
| unsigned char type1; |
| |
| if (mk_conf_addr(bus, devfn, where, &addr, &type1)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| switch (size) { |
| case 1: |
| __kernel_stb(value, *(vucp)addr); |
| mb(); |
| __kernel_ldbu(*(vucp)addr); |
| break; |
| case 2: |
| __kernel_stw(value, *(vusp)addr); |
| mb(); |
| __kernel_ldwu(*(vusp)addr); |
| break; |
| case 4: |
| *(vuip)addr = value; |
| mb(); |
| *(vuip)addr; |
| break; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| struct pci_ops irongate_pci_ops = |
| { |
| .read = irongate_read_config, |
| .write = irongate_write_config, |
| }; |
| |
| int |
| irongate_pci_clr_err(void) |
| { |
| unsigned int nmi_ctl=0; |
| unsigned int IRONGATE_jd; |
| |
| again: |
| IRONGATE_jd = IRONGATE0->stat_cmd; |
| printk("Iron stat_cmd %x\n", IRONGATE_jd); |
| IRONGATE0->stat_cmd = IRONGATE_jd; /* write again clears error bits */ |
| mb(); |
| IRONGATE_jd = IRONGATE0->stat_cmd; /* re-read to force write */ |
| |
| IRONGATE_jd = *IronECC; |
| printk("Iron ECC %x\n", IRONGATE_jd); |
| *IronECC = IRONGATE_jd; /* write again clears error bits */ |
| mb(); |
| IRONGATE_jd = *IronECC; /* re-read to force write */ |
| |
| /* Clear ALI NMI */ |
| nmi_ctl = inb(0x61); |
| nmi_ctl |= 0x0c; |
| outb(nmi_ctl, 0x61); |
| nmi_ctl &= ~0x0c; |
| outb(nmi_ctl, 0x61); |
| |
| IRONGATE_jd = *IronECC; |
| if (IRONGATE_jd & 0x300) goto again; |
| |
| return 0; |
| } |
| |
| #define IRONGATE_3GB 0xc0000000UL |
| |
| /* On Albacore (aka UP1500) with 4Gb of RAM we have to reserve some |
| memory for PCI. At this point we just reserve memory above 3Gb. Most |
| of this memory will be freed after PCI setup is done. */ |
| static void __init |
| albacore_init_arch(void) |
| { |
| unsigned long memtop = max_low_pfn << PAGE_SHIFT; |
| unsigned long pci_mem = (memtop + 0x1000000UL) & ~0xffffffUL; |
| struct percpu_struct *cpu; |
| int pal_rev, pal_var; |
| |
| cpu = (struct percpu_struct*)((char*)hwrpb + hwrpb->processor_offset); |
| pal_rev = cpu->pal_revision & 0xffff; |
| pal_var = (cpu->pal_revision >> 16) & 0xff; |
| |
| /* Consoles earlier than A5.6-18 (OSF PALcode v1.62-2) set up |
| the CPU incorrectly (leave speculative stores enabled), |
| which causes memory corruption under certain conditions. |
| Issue a warning for such consoles. */ |
| if (alpha_using_srm && |
| (pal_rev < 0x13e || (pal_rev == 0x13e && pal_var < 2))) |
| printk(KERN_WARNING "WARNING! Upgrade to SRM A5.6-19 " |
| "or later\n"); |
| |
| if (pci_mem > IRONGATE_3GB) |
| pci_mem = IRONGATE_3GB; |
| IRONGATE0->pci_mem = pci_mem; |
| alpha_mv.min_mem_address = pci_mem; |
| if (memtop > pci_mem) { |
| #ifdef CONFIG_BLK_DEV_INITRD |
| extern unsigned long initrd_start, initrd_end; |
| extern void *move_initrd(unsigned long); |
| |
| /* Move the initrd out of the way. */ |
| if (initrd_end && __pa(initrd_end) > pci_mem) { |
| unsigned long size; |
| |
| size = initrd_end - initrd_start; |
| memblock_free((void *)initrd_start, PAGE_ALIGN(size)); |
| if (!move_initrd(pci_mem)) |
| printk("irongate_init_arch: initrd too big " |
| "(%ldK)\ndisabling initrd\n", |
| size / 1024); |
| } |
| #endif |
| memblock_reserve(pci_mem, memtop - pci_mem); |
| printk("irongate_init_arch: temporarily reserving " |
| "region %08lx-%08lx for PCI\n", pci_mem, memtop - 1); |
| } |
| } |
| |
| static void __init |
| irongate_setup_agp(void) |
| { |
| /* Disable the GART window. AGPGART doesn't work due to yet |
| unresolved memory coherency issues... */ |
| IRONGATE0->agpva = IRONGATE0->agpva & ~0xf; |
| alpha_agpgart_size = 0; |
| } |
| |
| void __init |
| irongate_init_arch(void) |
| { |
| struct pci_controller *hose; |
| int amd761 = (IRONGATE0->dev_vendor >> 16) > 0x7006; /* Albacore? */ |
| |
| IronECC = amd761 ? &IRONGATE0->bacsr54_eccms761 : &IRONGATE0->dramms; |
| |
| irongate_pci_clr_err(); |
| |
| if (amd761) |
| albacore_init_arch(); |
| |
| irongate_setup_agp(); |
| |
| /* |
| * Create our single hose. |
| */ |
| |
| pci_isa_hose = hose = alloc_pci_controller(); |
| hose->io_space = &ioport_resource; |
| hose->mem_space = &iomem_resource; |
| hose->index = 0; |
| |
| /* This is for userland consumption. For some reason, the 40-bit |
| PIO bias that we use in the kernel through KSEG didn't work for |
| the page table based user mappings. So make sure we get the |
| 43-bit PIO bias. */ |
| hose->sparse_mem_base = 0; |
| hose->sparse_io_base = 0; |
| hose->dense_mem_base |
| = (IRONGATE_MEM & 0xffffffffffUL) | 0x80000000000UL; |
| hose->dense_io_base |
| = (IRONGATE_IO & 0xffffffffffUL) | 0x80000000000UL; |
| |
| hose->sg_isa = hose->sg_pci = NULL; |
| __direct_map_base = 0; |
| __direct_map_size = 0xffffffff; |
| } |
| |
| /* |
| * IO map and AGP support |
| */ |
| #include <linux/vmalloc.h> |
| #include <linux/agp_backend.h> |
| #include <linux/agpgart.h> |
| #include <linux/export.h> |
| |
| #define GET_PAGE_DIR_OFF(addr) (addr >> 22) |
| #define GET_PAGE_DIR_IDX(addr) (GET_PAGE_DIR_OFF(addr)) |
| |
| #define GET_GATT_OFF(addr) ((addr & 0x003ff000) >> 12) |
| #define GET_GATT(addr) (gatt_pages[GET_PAGE_DIR_IDX(addr)]) |
| |
| void __iomem * |
| irongate_ioremap(unsigned long addr, unsigned long size) |
| { |
| struct vm_struct *area; |
| unsigned long vaddr; |
| unsigned long baddr, last; |
| u32 *mmio_regs, *gatt_pages, *cur_gatt, pte; |
| unsigned long gart_bus_addr; |
| |
| if (!alpha_agpgart_size) |
| return (void __iomem *)(addr + IRONGATE_MEM); |
| |
| gart_bus_addr = (unsigned long)IRONGATE0->bar0 & |
| PCI_BASE_ADDRESS_MEM_MASK; |
| |
| /* |
| * Check for within the AGP aperture... |
| */ |
| do { |
| /* |
| * Check the AGP area |
| */ |
| if (addr >= gart_bus_addr && addr + size - 1 < |
| gart_bus_addr + alpha_agpgart_size) |
| break; |
| |
| /* |
| * Not found - assume legacy ioremap |
| */ |
| return (void __iomem *)(addr + IRONGATE_MEM); |
| } while(0); |
| |
| mmio_regs = (u32 *)(((unsigned long)IRONGATE0->bar1 & |
| PCI_BASE_ADDRESS_MEM_MASK) + IRONGATE_MEM); |
| |
| gatt_pages = (u32 *)(phys_to_virt(mmio_regs[1])); /* FIXME */ |
| |
| /* |
| * Adjust the limits (mappings must be page aligned) |
| */ |
| if (addr & ~PAGE_MASK) { |
| printk("AGP ioremap failed... addr not page aligned (0x%lx)\n", |
| addr); |
| return (void __iomem *)(addr + IRONGATE_MEM); |
| } |
| last = addr + size - 1; |
| size = PAGE_ALIGN(last) - addr; |
| |
| #if 0 |
| printk("irongate_ioremap(0x%lx, 0x%lx)\n", addr, size); |
| printk("irongate_ioremap: gart_bus_addr 0x%lx\n", gart_bus_addr); |
| printk("irongate_ioremap: gart_aper_size 0x%lx\n", gart_aper_size); |
| printk("irongate_ioremap: mmio_regs %p\n", mmio_regs); |
| printk("irongate_ioremap: gatt_pages %p\n", gatt_pages); |
| |
| for(baddr = addr; baddr <= last; baddr += PAGE_SIZE) |
| { |
| cur_gatt = phys_to_virt(GET_GATT(baddr) & ~1); |
| pte = cur_gatt[GET_GATT_OFF(baddr)] & ~1; |
| printk("irongate_ioremap: cur_gatt %p pte 0x%x\n", |
| cur_gatt, pte); |
| } |
| #endif |
| |
| /* |
| * Map it |
| */ |
| area = get_vm_area(size, VM_IOREMAP); |
| if (!area) return NULL; |
| |
| for(baddr = addr, vaddr = (unsigned long)area->addr; |
| baddr <= last; |
| baddr += PAGE_SIZE, vaddr += PAGE_SIZE) |
| { |
| cur_gatt = phys_to_virt(GET_GATT(baddr) & ~1); |
| pte = cur_gatt[GET_GATT_OFF(baddr)] & ~1; |
| |
| if (__alpha_remap_area_pages(vaddr, |
| pte, PAGE_SIZE, 0)) { |
| printk("AGP ioremap: FAILED to map...\n"); |
| vfree(area->addr); |
| return NULL; |
| } |
| } |
| |
| flush_tlb_all(); |
| |
| vaddr = (unsigned long)area->addr + (addr & ~PAGE_MASK); |
| #if 0 |
| printk("irongate_ioremap(0x%lx, 0x%lx) returning 0x%lx\n", |
| addr, size, vaddr); |
| #endif |
| return (void __iomem *)vaddr; |
| } |
| EXPORT_SYMBOL(irongate_ioremap); |
| |
| void |
| irongate_iounmap(volatile void __iomem *xaddr) |
| { |
| unsigned long addr = (unsigned long) xaddr; |
| if (((long)addr >> 41) == -2) |
| return; /* kseg map, nothing to do */ |
| if (addr) |
| return vfree((void *)(PAGE_MASK & addr)); |
| } |
| EXPORT_SYMBOL(irongate_iounmap); |