| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2004, 2013 Intel Corporation |
| * Author: Naveen B S <naveen.b.s@intel.com> |
| * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
| * |
| * All rights reserved. |
| * |
| * ACPI based HotPlug driver that supports Memory Hotplug |
| * This driver fields notifications from firmware for memory add |
| * and remove operations and alerts the VM of the affected memory |
| * ranges. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/memory.h> |
| #include <linux/memory_hotplug.h> |
| |
| #include "internal.h" |
| |
| #define ACPI_MEMORY_DEVICE_CLASS "memory" |
| #define ACPI_MEMORY_DEVICE_HID "PNP0C80" |
| #define ACPI_MEMORY_DEVICE_NAME "Hotplug Mem Device" |
| |
| static const struct acpi_device_id memory_device_ids[] = { |
| {ACPI_MEMORY_DEVICE_HID, 0}, |
| {"", 0}, |
| }; |
| |
| #ifdef CONFIG_ACPI_HOTPLUG_MEMORY |
| |
| static int acpi_memory_device_add(struct acpi_device *device, |
| const struct acpi_device_id *not_used); |
| static void acpi_memory_device_remove(struct acpi_device *device); |
| |
| static struct acpi_scan_handler memory_device_handler = { |
| .ids = memory_device_ids, |
| .attach = acpi_memory_device_add, |
| .detach = acpi_memory_device_remove, |
| .hotplug = { |
| .enabled = true, |
| }, |
| }; |
| |
| struct acpi_memory_info { |
| struct list_head list; |
| u64 start_addr; /* Memory Range start physical addr */ |
| u64 length; /* Memory Range length */ |
| unsigned short caching; /* memory cache attribute */ |
| unsigned short write_protect; /* memory read/write attribute */ |
| unsigned int enabled:1; |
| }; |
| |
| struct acpi_memory_device { |
| struct acpi_device *device; |
| struct list_head res_list; |
| int mgid; |
| }; |
| |
| static acpi_status |
| acpi_memory_get_resource(struct acpi_resource *resource, void *context) |
| { |
| struct acpi_memory_device *mem_device = context; |
| struct acpi_resource_address64 address64; |
| struct acpi_memory_info *info, *new; |
| acpi_status status; |
| |
| status = acpi_resource_to_address64(resource, &address64); |
| if (ACPI_FAILURE(status) || |
| (address64.resource_type != ACPI_MEMORY_RANGE)) |
| return AE_OK; |
| |
| list_for_each_entry(info, &mem_device->res_list, list) { |
| /* Can we combine the resource range information? */ |
| if ((info->caching == address64.info.mem.caching) && |
| (info->write_protect == address64.info.mem.write_protect) && |
| (info->start_addr + info->length == address64.address.minimum)) { |
| info->length += address64.address.address_length; |
| return AE_OK; |
| } |
| } |
| |
| new = kzalloc(sizeof(struct acpi_memory_info), GFP_KERNEL); |
| if (!new) |
| return AE_ERROR; |
| |
| INIT_LIST_HEAD(&new->list); |
| new->caching = address64.info.mem.caching; |
| new->write_protect = address64.info.mem.write_protect; |
| new->start_addr = address64.address.minimum; |
| new->length = address64.address.address_length; |
| list_add_tail(&new->list, &mem_device->res_list); |
| |
| return AE_OK; |
| } |
| |
| static void |
| acpi_memory_free_device_resources(struct acpi_memory_device *mem_device) |
| { |
| struct acpi_memory_info *info, *n; |
| |
| list_for_each_entry_safe(info, n, &mem_device->res_list, list) |
| kfree(info); |
| INIT_LIST_HEAD(&mem_device->res_list); |
| } |
| |
| static int |
| acpi_memory_get_device_resources(struct acpi_memory_device *mem_device) |
| { |
| acpi_status status; |
| |
| if (!list_empty(&mem_device->res_list)) |
| return 0; |
| |
| status = acpi_walk_resources(mem_device->device->handle, METHOD_NAME__CRS, |
| acpi_memory_get_resource, mem_device); |
| if (ACPI_FAILURE(status)) { |
| acpi_memory_free_device_resources(mem_device); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int acpi_memory_check_device(struct acpi_memory_device *mem_device) |
| { |
| unsigned long long current_status; |
| |
| /* Get device present/absent information from the _STA */ |
| if (ACPI_FAILURE(acpi_evaluate_integer(mem_device->device->handle, |
| METHOD_NAME__STA, NULL, |
| ¤t_status))) |
| return -ENODEV; |
| /* |
| * Check for device status. Device should be |
| * present/enabled/functioning. |
| */ |
| if (!((current_status & ACPI_STA_DEVICE_PRESENT) |
| && (current_status & ACPI_STA_DEVICE_ENABLED) |
| && (current_status & ACPI_STA_DEVICE_FUNCTIONING))) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int acpi_bind_memblk(struct memory_block *mem, void *arg) |
| { |
| return acpi_bind_one(&mem->dev, arg); |
| } |
| |
| static int acpi_bind_memory_blocks(struct acpi_memory_info *info, |
| struct acpi_device *adev) |
| { |
| return walk_memory_blocks(info->start_addr, info->length, adev, |
| acpi_bind_memblk); |
| } |
| |
| static int acpi_unbind_memblk(struct memory_block *mem, void *arg) |
| { |
| acpi_unbind_one(&mem->dev); |
| return 0; |
| } |
| |
| static void acpi_unbind_memory_blocks(struct acpi_memory_info *info) |
| { |
| walk_memory_blocks(info->start_addr, info->length, NULL, |
| acpi_unbind_memblk); |
| } |
| |
| static int acpi_memory_enable_device(struct acpi_memory_device *mem_device) |
| { |
| acpi_handle handle = mem_device->device->handle; |
| mhp_t mhp_flags = MHP_NID_IS_MGID; |
| int result, num_enabled = 0; |
| struct acpi_memory_info *info; |
| u64 total_length = 0; |
| int node, mgid; |
| |
| node = acpi_get_node(handle); |
| |
| list_for_each_entry(info, &mem_device->res_list, list) { |
| if (!info->length) |
| continue; |
| /* We want a single node for the whole memory group */ |
| if (node < 0) |
| node = memory_add_physaddr_to_nid(info->start_addr); |
| total_length += info->length; |
| } |
| |
| if (!total_length) { |
| dev_err(&mem_device->device->dev, "device is empty\n"); |
| return -EINVAL; |
| } |
| |
| mgid = memory_group_register_static(node, PFN_UP(total_length)); |
| if (mgid < 0) |
| return mgid; |
| mem_device->mgid = mgid; |
| |
| /* |
| * Tell the VM there is more memory here... |
| * Note: Assume that this function returns zero on success |
| * We don't have memory-hot-add rollback function,now. |
| * (i.e. memory-hot-remove function) |
| */ |
| list_for_each_entry(info, &mem_device->res_list, list) { |
| /* |
| * If the memory block size is zero, please ignore it. |
| * Don't try to do the following memory hotplug flowchart. |
| */ |
| if (!info->length) |
| continue; |
| |
| mhp_flags |= MHP_MEMMAP_ON_MEMORY; |
| result = __add_memory(mgid, info->start_addr, info->length, |
| mhp_flags); |
| |
| /* |
| * If the memory block has been used by the kernel, add_memory() |
| * returns -EEXIST. If add_memory() returns the other error, it |
| * means that this memory block is not used by the kernel. |
| */ |
| if (result && result != -EEXIST) |
| continue; |
| |
| result = acpi_bind_memory_blocks(info, mem_device->device); |
| if (result) { |
| acpi_unbind_memory_blocks(info); |
| return -ENODEV; |
| } |
| |
| info->enabled = 1; |
| |
| /* |
| * Add num_enable even if add_memory() returns -EEXIST, so the |
| * device is bound to this driver. |
| */ |
| num_enabled++; |
| } |
| if (!num_enabled) { |
| dev_err(&mem_device->device->dev, "add_memory failed\n"); |
| return -EINVAL; |
| } |
| /* |
| * Sometimes the memory device will contain several memory blocks. |
| * When one memory block is hot-added to the system memory, it will |
| * be regarded as a success. |
| * Otherwise if the last memory block can't be hot-added to the system |
| * memory, it will be failure and the memory device can't be bound with |
| * driver. |
| */ |
| return 0; |
| } |
| |
| static void acpi_memory_remove_memory(struct acpi_memory_device *mem_device) |
| { |
| struct acpi_memory_info *info, *n; |
| |
| list_for_each_entry_safe(info, n, &mem_device->res_list, list) { |
| if (!info->enabled) |
| continue; |
| |
| acpi_unbind_memory_blocks(info); |
| __remove_memory(info->start_addr, info->length); |
| list_del(&info->list); |
| kfree(info); |
| } |
| } |
| |
| static void acpi_memory_device_free(struct acpi_memory_device *mem_device) |
| { |
| if (!mem_device) |
| return; |
| |
| /* In case we succeeded adding *some* memory, unregistering fails. */ |
| if (mem_device->mgid >= 0) |
| memory_group_unregister(mem_device->mgid); |
| |
| acpi_memory_free_device_resources(mem_device); |
| mem_device->device->driver_data = NULL; |
| kfree(mem_device); |
| } |
| |
| static int acpi_memory_device_add(struct acpi_device *device, |
| const struct acpi_device_id *not_used) |
| { |
| struct acpi_memory_device *mem_device; |
| int result; |
| |
| if (!device) |
| return -EINVAL; |
| |
| mem_device = kzalloc(sizeof(struct acpi_memory_device), GFP_KERNEL); |
| if (!mem_device) |
| return -ENOMEM; |
| |
| INIT_LIST_HEAD(&mem_device->res_list); |
| mem_device->device = device; |
| mem_device->mgid = -1; |
| sprintf(acpi_device_name(device), "%s", ACPI_MEMORY_DEVICE_NAME); |
| sprintf(acpi_device_class(device), "%s", ACPI_MEMORY_DEVICE_CLASS); |
| device->driver_data = mem_device; |
| |
| /* Get the range from the _CRS */ |
| result = acpi_memory_get_device_resources(mem_device); |
| if (result) { |
| device->driver_data = NULL; |
| kfree(mem_device); |
| return result; |
| } |
| |
| result = acpi_memory_check_device(mem_device); |
| if (result) { |
| acpi_memory_device_free(mem_device); |
| return 0; |
| } |
| |
| result = acpi_memory_enable_device(mem_device); |
| if (result) { |
| dev_err(&device->dev, "acpi_memory_enable_device() error\n"); |
| acpi_memory_device_free(mem_device); |
| return result; |
| } |
| |
| dev_dbg(&device->dev, "Memory device configured by ACPI\n"); |
| return 1; |
| } |
| |
| static void acpi_memory_device_remove(struct acpi_device *device) |
| { |
| struct acpi_memory_device *mem_device; |
| |
| if (!device || !acpi_driver_data(device)) |
| return; |
| |
| mem_device = acpi_driver_data(device); |
| acpi_memory_remove_memory(mem_device); |
| acpi_memory_device_free(mem_device); |
| } |
| |
| static bool __initdata acpi_no_memhotplug; |
| |
| void __init acpi_memory_hotplug_init(void) |
| { |
| if (acpi_no_memhotplug) { |
| memory_device_handler.attach = NULL; |
| acpi_scan_add_handler(&memory_device_handler); |
| return; |
| } |
| acpi_scan_add_handler_with_hotplug(&memory_device_handler, "memory"); |
| } |
| |
| static int __init disable_acpi_memory_hotplug(char *str) |
| { |
| acpi_no_memhotplug = true; |
| return 1; |
| } |
| __setup("acpi_no_memhotplug", disable_acpi_memory_hotplug); |
| |
| #else |
| |
| static struct acpi_scan_handler memory_device_handler = { |
| .ids = memory_device_ids, |
| }; |
| |
| void __init acpi_memory_hotplug_init(void) |
| { |
| acpi_scan_add_handler(&memory_device_handler); |
| } |
| |
| #endif /* CONFIG_ACPI_HOTPLUG_MEMORY */ |