| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * adt7x10.c - Part of lm_sensors, Linux kernel modules for hardware |
| * monitoring |
| * This driver handles the ADT7410 and compatible digital temperature sensors. |
| * Hartmut Knaack <knaack.h@gmx.de> 2012-07-22 |
| * based on lm75.c by Frodo Looijaard <frodol@dds.nl> |
| * and adt7410.c from iio-staging by Sonic Zhang <sonic.zhang@analog.com> |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/hwmon.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/regmap.h> |
| |
| #include "adt7x10.h" |
| |
| /* |
| * ADT7X10 status |
| */ |
| #define ADT7X10_STAT_T_LOW (1 << 4) |
| #define ADT7X10_STAT_T_HIGH (1 << 5) |
| #define ADT7X10_STAT_T_CRIT (1 << 6) |
| #define ADT7X10_STAT_NOT_RDY (1 << 7) |
| |
| /* |
| * ADT7X10 config |
| */ |
| #define ADT7X10_FAULT_QUEUE_MASK (1 << 0 | 1 << 1) |
| #define ADT7X10_CT_POLARITY (1 << 2) |
| #define ADT7X10_INT_POLARITY (1 << 3) |
| #define ADT7X10_EVENT_MODE (1 << 4) |
| #define ADT7X10_MODE_MASK (1 << 5 | 1 << 6) |
| #define ADT7X10_FULL (0 << 5 | 0 << 6) |
| #define ADT7X10_PD (1 << 5 | 1 << 6) |
| #define ADT7X10_RESOLUTION (1 << 7) |
| |
| /* |
| * ADT7X10 masks |
| */ |
| #define ADT7X10_T13_VALUE_MASK 0xFFF8 |
| #define ADT7X10_T_HYST_MASK 0xF |
| |
| /* straight from the datasheet */ |
| #define ADT7X10_TEMP_MIN (-55000) |
| #define ADT7X10_TEMP_MAX 150000 |
| |
| /* Each client has this additional data */ |
| struct adt7x10_data { |
| struct regmap *regmap; |
| struct mutex update_lock; |
| u8 config; |
| u8 oldconfig; |
| bool valid; /* true if temperature valid */ |
| }; |
| |
| enum { |
| adt7x10_temperature = 0, |
| adt7x10_t_alarm_high, |
| adt7x10_t_alarm_low, |
| adt7x10_t_crit, |
| }; |
| |
| static const u8 ADT7X10_REG_TEMP[] = { |
| [adt7x10_temperature] = ADT7X10_TEMPERATURE, /* input */ |
| [adt7x10_t_alarm_high] = ADT7X10_T_ALARM_HIGH, /* high */ |
| [adt7x10_t_alarm_low] = ADT7X10_T_ALARM_LOW, /* low */ |
| [adt7x10_t_crit] = ADT7X10_T_CRIT, /* critical */ |
| }; |
| |
| static irqreturn_t adt7x10_irq_handler(int irq, void *private) |
| { |
| struct device *dev = private; |
| struct adt7x10_data *d = dev_get_drvdata(dev); |
| unsigned int status; |
| int ret; |
| |
| ret = regmap_read(d->regmap, ADT7X10_STATUS, &status); |
| if (ret < 0) |
| return IRQ_HANDLED; |
| |
| if (status & ADT7X10_STAT_T_HIGH) |
| hwmon_notify_event(dev, hwmon_temp, hwmon_temp_max_alarm, 0); |
| if (status & ADT7X10_STAT_T_LOW) |
| hwmon_notify_event(dev, hwmon_temp, hwmon_temp_min_alarm, 0); |
| if (status & ADT7X10_STAT_T_CRIT) |
| hwmon_notify_event(dev, hwmon_temp, hwmon_temp_crit_alarm, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int adt7x10_temp_ready(struct regmap *regmap) |
| { |
| unsigned int status; |
| int i, ret; |
| |
| for (i = 0; i < 6; i++) { |
| ret = regmap_read(regmap, ADT7X10_STATUS, &status); |
| if (ret < 0) |
| return ret; |
| if (!(status & ADT7X10_STAT_NOT_RDY)) |
| return 0; |
| msleep(60); |
| } |
| return -ETIMEDOUT; |
| } |
| |
| static s16 ADT7X10_TEMP_TO_REG(long temp) |
| { |
| return DIV_ROUND_CLOSEST(clamp_val(temp, ADT7X10_TEMP_MIN, |
| ADT7X10_TEMP_MAX) * 128, 1000); |
| } |
| |
| static int ADT7X10_REG_TO_TEMP(struct adt7x10_data *data, s16 reg) |
| { |
| /* in 13 bit mode, bits 0-2 are status flags - mask them out */ |
| if (!(data->config & ADT7X10_RESOLUTION)) |
| reg &= ADT7X10_T13_VALUE_MASK; |
| /* |
| * temperature is stored in twos complement format, in steps of |
| * 1/128°C |
| */ |
| return DIV_ROUND_CLOSEST(reg * 1000, 128); |
| } |
| |
| /*-----------------------------------------------------------------------*/ |
| |
| static int adt7x10_temp_read(struct adt7x10_data *data, int index, long *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| mutex_lock(&data->update_lock); |
| if (index == adt7x10_temperature && !data->valid) { |
| /* wait for valid temperature */ |
| ret = adt7x10_temp_ready(data->regmap); |
| if (ret) { |
| mutex_unlock(&data->update_lock); |
| return ret; |
| } |
| data->valid = true; |
| } |
| mutex_unlock(&data->update_lock); |
| |
| ret = regmap_read(data->regmap, ADT7X10_REG_TEMP[index], ®val); |
| if (ret) |
| return ret; |
| |
| *val = ADT7X10_REG_TO_TEMP(data, regval); |
| return 0; |
| } |
| |
| static int adt7x10_temp_write(struct adt7x10_data *data, int index, long temp) |
| { |
| int ret; |
| |
| mutex_lock(&data->update_lock); |
| ret = regmap_write(data->regmap, ADT7X10_REG_TEMP[index], |
| ADT7X10_TEMP_TO_REG(temp)); |
| mutex_unlock(&data->update_lock); |
| return ret; |
| } |
| |
| static int adt7x10_hyst_read(struct adt7x10_data *data, int index, long *val) |
| { |
| int hyst, temp, ret; |
| |
| mutex_lock(&data->update_lock); |
| ret = regmap_read(data->regmap, ADT7X10_T_HYST, &hyst); |
| if (ret) { |
| mutex_unlock(&data->update_lock); |
| return ret; |
| } |
| |
| ret = regmap_read(data->regmap, ADT7X10_REG_TEMP[index], &temp); |
| mutex_unlock(&data->update_lock); |
| if (ret) |
| return ret; |
| |
| hyst = (hyst & ADT7X10_T_HYST_MASK) * 1000; |
| |
| /* |
| * hysteresis is stored as a 4 bit offset in the device, convert it |
| * to an absolute value |
| */ |
| /* min has positive offset, others have negative */ |
| if (index == adt7x10_t_alarm_low) |
| hyst = -hyst; |
| |
| *val = ADT7X10_REG_TO_TEMP(data, temp) - hyst; |
| return 0; |
| } |
| |
| static int adt7x10_hyst_write(struct adt7x10_data *data, long hyst) |
| { |
| unsigned int regval; |
| int limit, ret; |
| |
| mutex_lock(&data->update_lock); |
| |
| /* convert absolute hysteresis value to a 4 bit delta value */ |
| ret = regmap_read(data->regmap, ADT7X10_T_ALARM_HIGH, ®val); |
| if (ret < 0) |
| goto abort; |
| |
| limit = ADT7X10_REG_TO_TEMP(data, regval); |
| |
| hyst = clamp_val(hyst, ADT7X10_TEMP_MIN, ADT7X10_TEMP_MAX); |
| regval = clamp_val(DIV_ROUND_CLOSEST(limit - hyst, 1000), 0, |
| ADT7X10_T_HYST_MASK); |
| ret = regmap_write(data->regmap, ADT7X10_T_HYST, regval); |
| abort: |
| mutex_unlock(&data->update_lock); |
| return ret; |
| } |
| |
| static int adt7x10_alarm_read(struct adt7x10_data *data, int index, long *val) |
| { |
| unsigned int status; |
| int ret; |
| |
| ret = regmap_read(data->regmap, ADT7X10_STATUS, &status); |
| if (ret < 0) |
| return ret; |
| |
| *val = !!(status & index); |
| |
| return 0; |
| } |
| |
| static umode_t adt7x10_is_visible(const void *data, |
| enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| switch (attr) { |
| case hwmon_temp_max: |
| case hwmon_temp_min: |
| case hwmon_temp_crit: |
| case hwmon_temp_max_hyst: |
| return 0644; |
| case hwmon_temp_input: |
| case hwmon_temp_min_alarm: |
| case hwmon_temp_max_alarm: |
| case hwmon_temp_crit_alarm: |
| case hwmon_temp_min_hyst: |
| case hwmon_temp_crit_hyst: |
| return 0444; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int adt7x10_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| return adt7x10_temp_read(data, adt7x10_temperature, val); |
| case hwmon_temp_max: |
| return adt7x10_temp_read(data, adt7x10_t_alarm_high, val); |
| case hwmon_temp_min: |
| return adt7x10_temp_read(data, adt7x10_t_alarm_low, val); |
| case hwmon_temp_crit: |
| return adt7x10_temp_read(data, adt7x10_t_crit, val); |
| case hwmon_temp_max_hyst: |
| return adt7x10_hyst_read(data, adt7x10_t_alarm_high, val); |
| case hwmon_temp_min_hyst: |
| return adt7x10_hyst_read(data, adt7x10_t_alarm_low, val); |
| case hwmon_temp_crit_hyst: |
| return adt7x10_hyst_read(data, adt7x10_t_crit, val); |
| case hwmon_temp_min_alarm: |
| return adt7x10_alarm_read(data, ADT7X10_STAT_T_LOW, val); |
| case hwmon_temp_max_alarm: |
| return adt7x10_alarm_read(data, ADT7X10_STAT_T_HIGH, val); |
| case hwmon_temp_crit_alarm: |
| return adt7x10_alarm_read(data, ADT7X10_STAT_T_CRIT, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int adt7x10_write(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long val) |
| { |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| |
| switch (attr) { |
| case hwmon_temp_max: |
| return adt7x10_temp_write(data, adt7x10_t_alarm_high, val); |
| case hwmon_temp_min: |
| return adt7x10_temp_write(data, adt7x10_t_alarm_low, val); |
| case hwmon_temp_crit: |
| return adt7x10_temp_write(data, adt7x10_t_crit, val); |
| case hwmon_temp_max_hyst: |
| return adt7x10_hyst_write(data, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static const struct hwmon_channel_info * const adt7x10_info[] = { |
| HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN | |
| HWMON_T_CRIT | HWMON_T_MAX_HYST | HWMON_T_MIN_HYST | |
| HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM | |
| HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM), |
| NULL, |
| }; |
| |
| static const struct hwmon_ops adt7x10_hwmon_ops = { |
| .is_visible = adt7x10_is_visible, |
| .read = adt7x10_read, |
| .write = adt7x10_write, |
| }; |
| |
| static const struct hwmon_chip_info adt7x10_chip_info = { |
| .ops = &adt7x10_hwmon_ops, |
| .info = adt7x10_info, |
| }; |
| |
| static void adt7x10_restore_config(void *private) |
| { |
| struct adt7x10_data *data = private; |
| |
| regmap_write(data->regmap, ADT7X10_CONFIG, data->oldconfig); |
| } |
| |
| int adt7x10_probe(struct device *dev, const char *name, int irq, |
| struct regmap *regmap) |
| { |
| struct adt7x10_data *data; |
| unsigned int config; |
| struct device *hdev; |
| int ret; |
| |
| data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->regmap = regmap; |
| |
| dev_set_drvdata(dev, data); |
| mutex_init(&data->update_lock); |
| |
| /* configure as specified */ |
| ret = regmap_read(regmap, ADT7X10_CONFIG, &config); |
| if (ret < 0) { |
| dev_dbg(dev, "Can't read config? %d\n", ret); |
| return ret; |
| } |
| data->oldconfig = config; |
| |
| /* |
| * Set to 16 bit resolution, continous conversion and comparator mode. |
| */ |
| data->config = data->oldconfig; |
| data->config &= ~(ADT7X10_MODE_MASK | ADT7X10_CT_POLARITY | |
| ADT7X10_INT_POLARITY); |
| data->config |= ADT7X10_FULL | ADT7X10_RESOLUTION | ADT7X10_EVENT_MODE; |
| |
| if (data->config != data->oldconfig) { |
| ret = regmap_write(regmap, ADT7X10_CONFIG, data->config); |
| if (ret) |
| return ret; |
| ret = devm_add_action_or_reset(dev, adt7x10_restore_config, data); |
| if (ret) |
| return ret; |
| } |
| dev_dbg(dev, "Config %02x\n", data->config); |
| |
| hdev = devm_hwmon_device_register_with_info(dev, name, data, |
| &adt7x10_chip_info, NULL); |
| if (IS_ERR(hdev)) |
| return PTR_ERR(hdev); |
| |
| if (irq > 0) { |
| ret = devm_request_threaded_irq(dev, irq, NULL, |
| adt7x10_irq_handler, |
| IRQF_TRIGGER_FALLING | |
| IRQF_ONESHOT, |
| dev_name(dev), hdev); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(adt7x10_probe); |
| |
| static int adt7x10_suspend(struct device *dev) |
| { |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| |
| return regmap_write(data->regmap, ADT7X10_CONFIG, |
| data->config | ADT7X10_PD); |
| } |
| |
| static int adt7x10_resume(struct device *dev) |
| { |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| |
| return regmap_write(data->regmap, ADT7X10_CONFIG, data->config); |
| } |
| |
| EXPORT_SIMPLE_DEV_PM_OPS(adt7x10_dev_pm_ops, adt7x10_suspend, adt7x10_resume); |
| |
| MODULE_AUTHOR("Hartmut Knaack"); |
| MODULE_DESCRIPTION("ADT7410/ADT7420, ADT7310/ADT7320 common code"); |
| MODULE_LICENSE("GPL"); |