| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for Texas Instruments / National Semiconductor LM95234 |
| * |
| * Copyright (c) 2013, 2014 Guenter Roeck <linux@roeck-us.net> |
| * |
| * Derived from lm95241.c |
| * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/sysfs.h> |
| |
| #define DRVNAME "lm95234" |
| |
| enum chips { lm95233, lm95234 }; |
| |
| static const unsigned short normal_i2c[] = { |
| 0x18, 0x2a, 0x2b, 0x4d, 0x4e, I2C_CLIENT_END }; |
| |
| /* LM95234 registers */ |
| #define LM95234_REG_MAN_ID 0xFE |
| #define LM95234_REG_CHIP_ID 0xFF |
| #define LM95234_REG_STATUS 0x02 |
| #define LM95234_REG_CONFIG 0x03 |
| #define LM95234_REG_CONVRATE 0x04 |
| #define LM95234_REG_STS_FAULT 0x07 |
| #define LM95234_REG_STS_TCRIT1 0x08 |
| #define LM95234_REG_STS_TCRIT2 0x09 |
| #define LM95234_REG_TEMPH(x) ((x) + 0x10) |
| #define LM95234_REG_TEMPL(x) ((x) + 0x20) |
| #define LM95234_REG_UTEMPH(x) ((x) + 0x19) /* Remote only */ |
| #define LM95234_REG_UTEMPL(x) ((x) + 0x29) |
| #define LM95234_REG_REM_MODEL 0x30 |
| #define LM95234_REG_REM_MODEL_STS 0x38 |
| #define LM95234_REG_OFFSET(x) ((x) + 0x31) /* Remote only */ |
| #define LM95234_REG_TCRIT1(x) ((x) + 0x40) |
| #define LM95234_REG_TCRIT2(x) ((x) + 0x49) /* Remote channel 1,2 */ |
| #define LM95234_REG_TCRIT_HYST 0x5a |
| |
| #define NATSEMI_MAN_ID 0x01 |
| #define LM95233_CHIP_ID 0x89 |
| #define LM95234_CHIP_ID 0x79 |
| |
| /* Client data (each client gets its own) */ |
| struct lm95234_data { |
| struct i2c_client *client; |
| const struct attribute_group *groups[3]; |
| struct mutex update_lock; |
| unsigned long last_updated, interval; /* in jiffies */ |
| bool valid; /* false until following fields are valid */ |
| /* registers values */ |
| int temp[5]; /* temperature (signed) */ |
| u32 status; /* fault/alarm status */ |
| u8 tcrit1[5]; /* critical temperature limit */ |
| u8 tcrit2[2]; /* high temperature limit */ |
| s8 toffset[4]; /* remote temperature offset */ |
| u8 thyst; /* common hysteresis */ |
| |
| u8 sensor_type; /* temperature sensor type */ |
| }; |
| |
| static int lm95234_read_temp(struct i2c_client *client, int index, int *t) |
| { |
| int val; |
| u16 temp = 0; |
| |
| if (index) { |
| val = i2c_smbus_read_byte_data(client, |
| LM95234_REG_UTEMPH(index - 1)); |
| if (val < 0) |
| return val; |
| temp = val << 8; |
| val = i2c_smbus_read_byte_data(client, |
| LM95234_REG_UTEMPL(index - 1)); |
| if (val < 0) |
| return val; |
| temp |= val; |
| *t = temp; |
| } |
| /* |
| * Read signed temperature if unsigned temperature is 0, |
| * or if this is the local sensor. |
| */ |
| if (!temp) { |
| val = i2c_smbus_read_byte_data(client, |
| LM95234_REG_TEMPH(index)); |
| if (val < 0) |
| return val; |
| temp = val << 8; |
| val = i2c_smbus_read_byte_data(client, |
| LM95234_REG_TEMPL(index)); |
| if (val < 0) |
| return val; |
| temp |= val; |
| *t = (s16)temp; |
| } |
| return 0; |
| } |
| |
| static u16 update_intervals[] = { 143, 364, 1000, 2500 }; |
| |
| /* Fill value cache. Must be called with update lock held. */ |
| |
| static int lm95234_fill_cache(struct lm95234_data *data, |
| struct i2c_client *client) |
| { |
| int i, ret; |
| |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE); |
| if (ret < 0) |
| return ret; |
| |
| data->interval = msecs_to_jiffies(update_intervals[ret & 0x03]); |
| |
| for (i = 0; i < ARRAY_SIZE(data->tcrit1); i++) { |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT1(i)); |
| if (ret < 0) |
| return ret; |
| data->tcrit1[i] = ret; |
| } |
| for (i = 0; i < ARRAY_SIZE(data->tcrit2); i++) { |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT2(i)); |
| if (ret < 0) |
| return ret; |
| data->tcrit2[i] = ret; |
| } |
| for (i = 0; i < ARRAY_SIZE(data->toffset); i++) { |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_OFFSET(i)); |
| if (ret < 0) |
| return ret; |
| data->toffset[i] = ret; |
| } |
| |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT_HYST); |
| if (ret < 0) |
| return ret; |
| data->thyst = ret; |
| |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); |
| if (ret < 0) |
| return ret; |
| data->sensor_type = ret; |
| |
| return 0; |
| } |
| |
| static int lm95234_update_device(struct lm95234_data *data) |
| { |
| struct i2c_client *client = data->client; |
| int ret; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + data->interval) || |
| !data->valid) { |
| int i; |
| |
| if (!data->valid) { |
| ret = lm95234_fill_cache(data, client); |
| if (ret < 0) |
| goto abort; |
| } |
| |
| data->valid = false; |
| for (i = 0; i < ARRAY_SIZE(data->temp); i++) { |
| ret = lm95234_read_temp(client, i, &data->temp[i]); |
| if (ret < 0) |
| goto abort; |
| } |
| |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_FAULT); |
| if (ret < 0) |
| goto abort; |
| data->status = ret; |
| |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT1); |
| if (ret < 0) |
| goto abort; |
| data->status |= ret << 8; |
| |
| ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT2); |
| if (ret < 0) |
| goto abort; |
| data->status |= ret << 16; |
| |
| data->last_updated = jiffies; |
| data->valid = true; |
| } |
| ret = 0; |
| abort: |
| mutex_unlock(&data->update_lock); |
| |
| return ret; |
| } |
| |
| static ssize_t temp_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| int ret = lm95234_update_device(data); |
| |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%d\n", |
| DIV_ROUND_CLOSEST(data->temp[index] * 125, 32)); |
| } |
| |
| static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| u32 mask = to_sensor_dev_attr(attr)->index; |
| int ret = lm95234_update_device(data); |
| |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%u", !!(data->status & mask)); |
| } |
| |
| static ssize_t type_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| u8 mask = to_sensor_dev_attr(attr)->index; |
| int ret = lm95234_update_device(data); |
| |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, data->sensor_type & mask ? "1\n" : "2\n"); |
| } |
| |
| static ssize_t type_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| unsigned long val; |
| u8 mask = to_sensor_dev_attr(attr)->index; |
| int ret = lm95234_update_device(data); |
| |
| if (ret) |
| return ret; |
| |
| ret = kstrtoul(buf, 10, &val); |
| if (ret < 0) |
| return ret; |
| |
| if (val != 1 && val != 2) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| if (val == 1) |
| data->sensor_type |= mask; |
| else |
| data->sensor_type &= ~mask; |
| data->valid = false; |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_REM_MODEL, |
| data->sensor_type); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t tcrit2_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| int ret = lm95234_update_device(data); |
| |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%u", data->tcrit2[index] * 1000); |
| } |
| |
| static ssize_t tcrit2_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| long val; |
| int ret = lm95234_update_device(data); |
| |
| if (ret) |
| return ret; |
| |
| ret = kstrtol(buf, 10, &val); |
| if (ret < 0) |
| return ret; |
| |
| val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, index ? 255 : 127); |
| |
| mutex_lock(&data->update_lock); |
| data->tcrit2[index] = val; |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT2(index), val); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t tcrit2_hyst_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| int ret = lm95234_update_device(data); |
| |
| if (ret) |
| return ret; |
| |
| /* Result can be negative, so be careful with unsigned operands */ |
| return sprintf(buf, "%d", |
| ((int)data->tcrit2[index] - (int)data->thyst) * 1000); |
| } |
| |
| static ssize_t tcrit1_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| |
| return sprintf(buf, "%u", data->tcrit1[index] * 1000); |
| } |
| |
| static ssize_t tcrit1_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| int ret = lm95234_update_device(data); |
| long val; |
| |
| if (ret) |
| return ret; |
| |
| ret = kstrtol(buf, 10, &val); |
| if (ret < 0) |
| return ret; |
| |
| val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 255); |
| |
| mutex_lock(&data->update_lock); |
| data->tcrit1[index] = val; |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT1(index), val); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t tcrit1_hyst_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| int ret = lm95234_update_device(data); |
| |
| if (ret) |
| return ret; |
| |
| /* Result can be negative, so be careful with unsigned operands */ |
| return sprintf(buf, "%d", |
| ((int)data->tcrit1[index] - (int)data->thyst) * 1000); |
| } |
| |
| static ssize_t tcrit1_hyst_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| int ret = lm95234_update_device(data); |
| long val; |
| |
| if (ret) |
| return ret; |
| |
| ret = kstrtol(buf, 10, &val); |
| if (ret < 0) |
| return ret; |
| |
| val = DIV_ROUND_CLOSEST(val, 1000); |
| val = clamp_val((int)data->tcrit1[index] - val, 0, 31); |
| |
| mutex_lock(&data->update_lock); |
| data->thyst = val; |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT_HYST, val); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t offset_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| int ret = lm95234_update_device(data); |
| |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%d", data->toffset[index] * 500); |
| } |
| |
| static ssize_t offset_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| int ret = lm95234_update_device(data); |
| long val; |
| |
| if (ret) |
| return ret; |
| |
| ret = kstrtol(buf, 10, &val); |
| if (ret < 0) |
| return ret; |
| |
| /* Accuracy is 1/2 degrees C */ |
| val = clamp_val(DIV_ROUND_CLOSEST(val, 500), -128, 127); |
| |
| mutex_lock(&data->update_lock); |
| data->toffset[index] = val; |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_OFFSET(index), val); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t update_interval_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int ret = lm95234_update_device(data); |
| |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%lu\n", |
| DIV_ROUND_CLOSEST(data->interval * 1000, HZ)); |
| } |
| |
| static ssize_t update_interval_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct lm95234_data *data = dev_get_drvdata(dev); |
| int ret = lm95234_update_device(data); |
| unsigned long val; |
| u8 regval; |
| |
| if (ret) |
| return ret; |
| |
| ret = kstrtoul(buf, 10, &val); |
| if (ret < 0) |
| return ret; |
| |
| for (regval = 0; regval < 3; regval++) { |
| if (val <= update_intervals[regval]) |
| break; |
| } |
| |
| mutex_lock(&data->update_lock); |
| data->interval = msecs_to_jiffies(update_intervals[regval]); |
| i2c_smbus_write_byte_data(data->client, LM95234_REG_CONVRATE, regval); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); |
| static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); |
| static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); |
| static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3); |
| static SENSOR_DEVICE_ATTR_RO(temp5_input, temp, 4); |
| |
| static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, BIT(0) | BIT(1)); |
| static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, BIT(2) | BIT(3)); |
| static SENSOR_DEVICE_ATTR_RO(temp4_fault, alarm, BIT(4) | BIT(5)); |
| static SENSOR_DEVICE_ATTR_RO(temp5_fault, alarm, BIT(6) | BIT(7)); |
| |
| static SENSOR_DEVICE_ATTR_RW(temp2_type, type, BIT(1)); |
| static SENSOR_DEVICE_ATTR_RW(temp3_type, type, BIT(2)); |
| static SENSOR_DEVICE_ATTR_RW(temp4_type, type, BIT(3)); |
| static SENSOR_DEVICE_ATTR_RW(temp5_type, type, BIT(4)); |
| |
| static SENSOR_DEVICE_ATTR_RW(temp1_max, tcrit1, 0); |
| static SENSOR_DEVICE_ATTR_RW(temp2_max, tcrit2, 0); |
| static SENSOR_DEVICE_ATTR_RW(temp3_max, tcrit2, 1); |
| static SENSOR_DEVICE_ATTR_RW(temp4_max, tcrit1, 3); |
| static SENSOR_DEVICE_ATTR_RW(temp5_max, tcrit1, 4); |
| |
| static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, tcrit1_hyst, 0); |
| static SENSOR_DEVICE_ATTR_RO(temp2_max_hyst, tcrit2_hyst, 0); |
| static SENSOR_DEVICE_ATTR_RO(temp3_max_hyst, tcrit2_hyst, 1); |
| static SENSOR_DEVICE_ATTR_RO(temp4_max_hyst, tcrit1_hyst, 3); |
| static SENSOR_DEVICE_ATTR_RO(temp5_max_hyst, tcrit1_hyst, 4); |
| |
| static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, BIT(0 + 8)); |
| static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, BIT(1 + 16)); |
| static SENSOR_DEVICE_ATTR_RO(temp3_max_alarm, alarm, BIT(2 + 16)); |
| static SENSOR_DEVICE_ATTR_RO(temp4_max_alarm, alarm, BIT(3 + 8)); |
| static SENSOR_DEVICE_ATTR_RO(temp5_max_alarm, alarm, BIT(4 + 8)); |
| |
| static SENSOR_DEVICE_ATTR_RW(temp2_crit, tcrit1, 1); |
| static SENSOR_DEVICE_ATTR_RW(temp3_crit, tcrit1, 2); |
| |
| static SENSOR_DEVICE_ATTR_RO(temp2_crit_hyst, tcrit1_hyst, 1); |
| static SENSOR_DEVICE_ATTR_RO(temp3_crit_hyst, tcrit1_hyst, 2); |
| |
| static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, BIT(1 + 8)); |
| static SENSOR_DEVICE_ATTR_RO(temp3_crit_alarm, alarm, BIT(2 + 8)); |
| |
| static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 0); |
| static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 1); |
| static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 2); |
| static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 3); |
| |
| static DEVICE_ATTR_RW(update_interval); |
| |
| static struct attribute *lm95234_common_attrs[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp3_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_fault.dev_attr.attr, |
| &sensor_dev_attr_temp3_fault.dev_attr.attr, |
| &sensor_dev_attr_temp2_type.dev_attr.attr, |
| &sensor_dev_attr_temp3_type.dev_attr.attr, |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp2_max.dev_attr.attr, |
| &sensor_dev_attr_temp3_max.dev_attr.attr, |
| &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_crit.dev_attr.attr, |
| &sensor_dev_attr_temp3_crit.dev_attr.attr, |
| &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_offset.dev_attr.attr, |
| &sensor_dev_attr_temp3_offset.dev_attr.attr, |
| &dev_attr_update_interval.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group lm95234_common_group = { |
| .attrs = lm95234_common_attrs, |
| }; |
| |
| static struct attribute *lm95234_attrs[] = { |
| &sensor_dev_attr_temp4_input.dev_attr.attr, |
| &sensor_dev_attr_temp5_input.dev_attr.attr, |
| &sensor_dev_attr_temp4_fault.dev_attr.attr, |
| &sensor_dev_attr_temp5_fault.dev_attr.attr, |
| &sensor_dev_attr_temp4_type.dev_attr.attr, |
| &sensor_dev_attr_temp5_type.dev_attr.attr, |
| &sensor_dev_attr_temp4_max.dev_attr.attr, |
| &sensor_dev_attr_temp5_max.dev_attr.attr, |
| &sensor_dev_attr_temp4_max_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp5_max_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp5_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp4_offset.dev_attr.attr, |
| &sensor_dev_attr_temp5_offset.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group lm95234_group = { |
| .attrs = lm95234_attrs, |
| }; |
| |
| static int lm95234_detect(struct i2c_client *client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| int address = client->addr; |
| u8 config_mask, model_mask; |
| int mfg_id, chip_id, val; |
| const char *name; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| mfg_id = i2c_smbus_read_byte_data(client, LM95234_REG_MAN_ID); |
| if (mfg_id != NATSEMI_MAN_ID) |
| return -ENODEV; |
| |
| chip_id = i2c_smbus_read_byte_data(client, LM95234_REG_CHIP_ID); |
| switch (chip_id) { |
| case LM95233_CHIP_ID: |
| if (address != 0x18 && address != 0x2a && address != 0x2b) |
| return -ENODEV; |
| config_mask = 0xbf; |
| model_mask = 0xf9; |
| name = "lm95233"; |
| break; |
| case LM95234_CHIP_ID: |
| if (address != 0x18 && address != 0x4d && address != 0x4e) |
| return -ENODEV; |
| config_mask = 0xbc; |
| model_mask = 0xe1; |
| name = "lm95234"; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_STATUS); |
| if (val & 0x30) |
| return -ENODEV; |
| |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG); |
| if (val & config_mask) |
| return -ENODEV; |
| |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE); |
| if (val & 0xfc) |
| return -ENODEV; |
| |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); |
| if (val & model_mask) |
| return -ENODEV; |
| |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS); |
| if (val & model_mask) |
| return -ENODEV; |
| |
| strscpy(info->type, name, I2C_NAME_SIZE); |
| return 0; |
| } |
| |
| static int lm95234_init_client(struct i2c_client *client) |
| { |
| int val, model; |
| |
| /* start conversion if necessary */ |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG); |
| if (val < 0) |
| return val; |
| if (val & 0x40) |
| i2c_smbus_write_byte_data(client, LM95234_REG_CONFIG, |
| val & ~0x40); |
| |
| /* If diode type status reports an error, try to fix it */ |
| val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS); |
| if (val < 0) |
| return val; |
| model = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL); |
| if (model < 0) |
| return model; |
| if (model & val) { |
| dev_notice(&client->dev, |
| "Fixing remote diode type misconfiguration (0x%x)\n", |
| val); |
| i2c_smbus_write_byte_data(client, LM95234_REG_REM_MODEL, |
| model & ~val); |
| } |
| return 0; |
| } |
| |
| static const struct i2c_device_id lm95234_id[]; |
| |
| static int lm95234_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct lm95234_data *data; |
| struct device *hwmon_dev; |
| int err; |
| |
| data = devm_kzalloc(dev, sizeof(struct lm95234_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->client = client; |
| mutex_init(&data->update_lock); |
| |
| /* Initialize the LM95234 chip */ |
| err = lm95234_init_client(client); |
| if (err < 0) |
| return err; |
| |
| data->groups[0] = &lm95234_common_group; |
| if (i2c_match_id(lm95234_id, client)->driver_data == lm95234) |
| data->groups[1] = &lm95234_group; |
| |
| hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, |
| data, data->groups); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| /* Driver data (common to all clients) */ |
| static const struct i2c_device_id lm95234_id[] = { |
| { "lm95233", lm95233 }, |
| { "lm95234", lm95234 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lm95234_id); |
| |
| static struct i2c_driver lm95234_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = DRVNAME, |
| }, |
| .probe = lm95234_probe, |
| .id_table = lm95234_id, |
| .detect = lm95234_detect, |
| .address_list = normal_i2c, |
| }; |
| |
| module_i2c_driver(lm95234_driver); |
| |
| MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); |
| MODULE_DESCRIPTION("LM95233/LM95234 sensor driver"); |
| MODULE_LICENSE("GPL"); |