| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * mpq7932.c - hwmon with optional regulator driver for mps mpq7932 |
| * Copyright 2022 Monolithic Power Systems, Inc |
| * |
| * Author: Saravanan Sekar <saravanan@linumiz.com> |
| */ |
| |
| #include <linux/bits.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/pmbus.h> |
| #include "pmbus.h" |
| |
| #define MPQ7932_BUCK_UV_MIN 206250 |
| #define MPQ7932_UV_STEP 6250 |
| #define MPQ7932_N_VOLTAGES 256 |
| #define MPQ7932_VOUT_MAX 0xFF |
| #define MPQ7932_NUM_PAGES 6 |
| #define MPQ2286_NUM_PAGES 1 |
| |
| #define MPQ7932_TON_DELAY 0x60 |
| #define MPQ7932_VOUT_STARTUP_SLEW 0xA3 |
| #define MPQ7932_VOUT_SHUTDOWN_SLEW 0xA5 |
| #define MPQ7932_VOUT_SLEW_MASK GENMASK(1, 0) |
| #define MPQ7932_TON_DELAY_MASK GENMASK(4, 0) |
| |
| struct mpq7932_data { |
| struct pmbus_driver_info info; |
| struct pmbus_platform_data pdata; |
| }; |
| |
| #if IS_ENABLED(CONFIG_SENSORS_MPQ7932_REGULATOR) |
| static struct regulator_desc mpq7932_regulators_desc[] = { |
| PMBUS_REGULATOR_STEP("buck", 0, MPQ7932_N_VOLTAGES, |
| MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), |
| PMBUS_REGULATOR_STEP("buck", 1, MPQ7932_N_VOLTAGES, |
| MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), |
| PMBUS_REGULATOR_STEP("buck", 2, MPQ7932_N_VOLTAGES, |
| MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), |
| PMBUS_REGULATOR_STEP("buck", 3, MPQ7932_N_VOLTAGES, |
| MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), |
| PMBUS_REGULATOR_STEP("buck", 4, MPQ7932_N_VOLTAGES, |
| MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), |
| PMBUS_REGULATOR_STEP("buck", 5, MPQ7932_N_VOLTAGES, |
| MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), |
| }; |
| |
| static const struct regulator_desc mpq7932_regulators_desc_one[] = { |
| PMBUS_REGULATOR_STEP_ONE("buck", MPQ7932_N_VOLTAGES, |
| MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), |
| }; |
| #endif |
| |
| static int mpq7932_write_word_data(struct i2c_client *client, int page, int reg, |
| u16 word) |
| { |
| switch (reg) { |
| /* |
| * chip supports only byte access for VOUT_COMMAND otherwise |
| * access results -EREMOTEIO |
| */ |
| case PMBUS_VOUT_COMMAND: |
| return pmbus_write_byte_data(client, page, reg, word & 0xFF); |
| |
| default: |
| return -ENODATA; |
| } |
| } |
| |
| static int mpq7932_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| switch (reg) { |
| /* |
| * chip supports neither (PMBUS_VOUT_MARGIN_HIGH, PMBUS_VOUT_MARGIN_LOW) |
| * nor (PMBUS_MFR_VOUT_MIN, PMBUS_MFR_VOUT_MAX). As a result set voltage |
| * fails due to error in pmbus_regulator_get_low_margin, so faked. |
| */ |
| case PMBUS_MFR_VOUT_MIN: |
| return 0; |
| |
| case PMBUS_MFR_VOUT_MAX: |
| return MPQ7932_VOUT_MAX; |
| |
| /* |
| * chip supports only byte access for VOUT_COMMAND otherwise |
| * access results in -EREMOTEIO |
| */ |
| case PMBUS_READ_VOUT: |
| return pmbus_read_byte_data(client, page, PMBUS_VOUT_COMMAND); |
| |
| default: |
| return -ENODATA; |
| } |
| } |
| |
| static int mpq7932_probe(struct i2c_client *client) |
| { |
| struct mpq7932_data *data; |
| struct pmbus_driver_info *info; |
| struct device *dev = &client->dev; |
| int i; |
| |
| data = devm_kzalloc(dev, sizeof(struct mpq7932_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| info = &data->info; |
| info->pages = (int)(unsigned long)device_get_match_data(&client->dev); |
| info->format[PSC_VOLTAGE_OUT] = direct; |
| info->m[PSC_VOLTAGE_OUT] = 160; |
| info->b[PSC_VOLTAGE_OUT] = -33; |
| for (i = 0; i < info->pages; i++) { |
| info->func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_STATUS_TEMP; |
| } |
| |
| #if IS_ENABLED(CONFIG_SENSORS_MPQ7932_REGULATOR) |
| info->num_regulators = info->pages; |
| if (info->num_regulators == 1) |
| info->reg_desc = mpq7932_regulators_desc_one; |
| else |
| info->reg_desc = mpq7932_regulators_desc; |
| #endif |
| |
| info->read_word_data = mpq7932_read_word_data; |
| info->write_word_data = mpq7932_write_word_data; |
| |
| data->pdata.flags = PMBUS_NO_CAPABILITY; |
| dev->platform_data = &data->pdata; |
| |
| return pmbus_do_probe(client, info); |
| } |
| |
| static const struct of_device_id mpq7932_of_match[] = { |
| { .compatible = "mps,mpq2286", .data = (void *)MPQ2286_NUM_PAGES }, |
| { .compatible = "mps,mpq7932", .data = (void *)MPQ7932_NUM_PAGES }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mpq7932_of_match); |
| |
| static const struct i2c_device_id mpq7932_id[] = { |
| { "mpq2286", }, |
| { "mpq7932", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, mpq7932_id); |
| |
| static struct i2c_driver mpq7932_regulator_driver = { |
| .driver = { |
| .name = "mpq7932", |
| .of_match_table = mpq7932_of_match, |
| }, |
| .probe = mpq7932_probe, |
| .id_table = mpq7932_id, |
| }; |
| module_i2c_driver(mpq7932_regulator_driver); |
| |
| MODULE_AUTHOR("Saravanan Sekar <saravanan@linumiz.com>"); |
| MODULE_DESCRIPTION("MPQ7932 PMIC regulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(PMBUS); |