| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Ampere Computing SoC's SMPro Hardware Monitoring Driver |
| * |
| * Copyright (c) 2022, Ampere Computing LLC |
| */ |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/kernel.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| |
| /* Logical Power Sensor Registers */ |
| #define SOC_TEMP 0x10 |
| #define SOC_VRD_TEMP 0x11 |
| #define DIMM_VRD_TEMP 0x12 |
| #define CORE_VRD_TEMP 0x13 |
| #define CH0_DIMM_TEMP 0x14 |
| #define CH1_DIMM_TEMP 0x15 |
| #define CH2_DIMM_TEMP 0x16 |
| #define CH3_DIMM_TEMP 0x17 |
| #define CH4_DIMM_TEMP 0x18 |
| #define CH5_DIMM_TEMP 0x19 |
| #define CH6_DIMM_TEMP 0x1A |
| #define CH7_DIMM_TEMP 0x1B |
| #define RCA_VRD_TEMP 0x1C |
| |
| #define CORE_VRD_PWR 0x20 |
| #define SOC_PWR 0x21 |
| #define DIMM_VRD1_PWR 0x22 |
| #define DIMM_VRD2_PWR 0x23 |
| #define CORE_VRD_PWR_MW 0x26 |
| #define SOC_PWR_MW 0x27 |
| #define DIMM_VRD1_PWR_MW 0x28 |
| #define DIMM_VRD2_PWR_MW 0x29 |
| #define RCA_VRD_PWR 0x2A |
| #define RCA_VRD_PWR_MW 0x2B |
| |
| #define MEM_HOT_THRESHOLD 0x32 |
| #define SOC_VR_HOT_THRESHOLD 0x33 |
| #define CORE_VRD_VOLT 0x34 |
| #define SOC_VRD_VOLT 0x35 |
| #define DIMM_VRD1_VOLT 0x36 |
| #define DIMM_VRD2_VOLT 0x37 |
| #define RCA_VRD_VOLT 0x38 |
| |
| #define CORE_VRD_CURR 0x39 |
| #define SOC_VRD_CURR 0x3A |
| #define DIMM_VRD1_CURR 0x3B |
| #define DIMM_VRD2_CURR 0x3C |
| #define RCA_VRD_CURR 0x3D |
| |
| struct smpro_hwmon { |
| struct regmap *regmap; |
| }; |
| |
| struct smpro_sensor { |
| const u8 reg; |
| const u8 reg_ext; |
| const char *label; |
| }; |
| |
| static const struct smpro_sensor temperature[] = { |
| { |
| .reg = SOC_TEMP, |
| .label = "temp1 SoC" |
| }, |
| { |
| .reg = SOC_VRD_TEMP, |
| .reg_ext = SOC_VR_HOT_THRESHOLD, |
| .label = "temp2 SoC VRD" |
| }, |
| { |
| .reg = DIMM_VRD_TEMP, |
| .label = "temp3 DIMM VRD" |
| }, |
| { |
| .reg = CORE_VRD_TEMP, |
| .label = "temp4 CORE VRD" |
| }, |
| { |
| .reg = CH0_DIMM_TEMP, |
| .reg_ext = MEM_HOT_THRESHOLD, |
| .label = "temp5 CH0 DIMM" |
| }, |
| { |
| .reg = CH1_DIMM_TEMP, |
| .reg_ext = MEM_HOT_THRESHOLD, |
| .label = "temp6 CH1 DIMM" |
| }, |
| { |
| .reg = CH2_DIMM_TEMP, |
| .reg_ext = MEM_HOT_THRESHOLD, |
| .label = "temp7 CH2 DIMM" |
| }, |
| { |
| .reg = CH3_DIMM_TEMP, |
| .reg_ext = MEM_HOT_THRESHOLD, |
| .label = "temp8 CH3 DIMM" |
| }, |
| { |
| .reg = CH4_DIMM_TEMP, |
| .reg_ext = MEM_HOT_THRESHOLD, |
| .label = "temp9 CH4 DIMM" |
| }, |
| { |
| .reg = CH5_DIMM_TEMP, |
| .reg_ext = MEM_HOT_THRESHOLD, |
| .label = "temp10 CH5 DIMM" |
| }, |
| { |
| .reg = CH6_DIMM_TEMP, |
| .reg_ext = MEM_HOT_THRESHOLD, |
| .label = "temp11 CH6 DIMM" |
| }, |
| { |
| .reg = CH7_DIMM_TEMP, |
| .reg_ext = MEM_HOT_THRESHOLD, |
| .label = "temp12 CH7 DIMM" |
| }, |
| { |
| .reg = RCA_VRD_TEMP, |
| .label = "temp13 RCA VRD" |
| }, |
| }; |
| |
| static const struct smpro_sensor voltage[] = { |
| { |
| .reg = CORE_VRD_VOLT, |
| .label = "vout0 CORE VRD" |
| }, |
| { |
| .reg = SOC_VRD_VOLT, |
| .label = "vout1 SoC VRD" |
| }, |
| { |
| .reg = DIMM_VRD1_VOLT, |
| .label = "vout2 DIMM VRD1" |
| }, |
| { |
| .reg = DIMM_VRD2_VOLT, |
| .label = "vout3 DIMM VRD2" |
| }, |
| { |
| .reg = RCA_VRD_VOLT, |
| .label = "vout4 RCA VRD" |
| }, |
| }; |
| |
| static const struct smpro_sensor curr_sensor[] = { |
| { |
| .reg = CORE_VRD_CURR, |
| .label = "iout1 CORE VRD" |
| }, |
| { |
| .reg = SOC_VRD_CURR, |
| .label = "iout2 SoC VRD" |
| }, |
| { |
| .reg = DIMM_VRD1_CURR, |
| .label = "iout3 DIMM VRD1" |
| }, |
| { |
| .reg = DIMM_VRD2_CURR, |
| .label = "iout4 DIMM VRD2" |
| }, |
| { |
| .reg = RCA_VRD_CURR, |
| .label = "iout5 RCA VRD" |
| }, |
| }; |
| |
| static const struct smpro_sensor power[] = { |
| { |
| .reg = CORE_VRD_PWR, |
| .reg_ext = CORE_VRD_PWR_MW, |
| .label = "power1 CORE VRD" |
| }, |
| { |
| .reg = SOC_PWR, |
| .reg_ext = SOC_PWR_MW, |
| .label = "power2 SoC" |
| }, |
| { |
| .reg = DIMM_VRD1_PWR, |
| .reg_ext = DIMM_VRD1_PWR_MW, |
| .label = "power3 DIMM VRD1" |
| }, |
| { |
| .reg = DIMM_VRD2_PWR, |
| .reg_ext = DIMM_VRD2_PWR_MW, |
| .label = "power4 DIMM VRD2" |
| }, |
| { |
| .reg = RCA_VRD_PWR, |
| .reg_ext = RCA_VRD_PWR_MW, |
| .label = "power5 RCA VRD" |
| }, |
| }; |
| |
| static int smpro_read_temp(struct device *dev, u32 attr, int channel, long *val) |
| { |
| struct smpro_hwmon *hwmon = dev_get_drvdata(dev); |
| unsigned int value; |
| int ret; |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| ret = regmap_read(hwmon->regmap, temperature[channel].reg, &value); |
| if (ret) |
| return ret; |
| break; |
| case hwmon_temp_crit: |
| ret = regmap_read(hwmon->regmap, temperature[channel].reg_ext, &value); |
| if (ret) |
| return ret; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| *val = sign_extend32(value, 8) * 1000; |
| return 0; |
| } |
| |
| static int smpro_read_in(struct device *dev, u32 attr, int channel, long *val) |
| { |
| struct smpro_hwmon *hwmon = dev_get_drvdata(dev); |
| unsigned int value; |
| int ret; |
| |
| switch (attr) { |
| case hwmon_in_input: |
| ret = regmap_read(hwmon->regmap, voltage[channel].reg, &value); |
| if (ret < 0) |
| return ret; |
| /* 15-bit value in 1mV */ |
| *val = value & 0x7fff; |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int smpro_read_curr(struct device *dev, u32 attr, int channel, long *val) |
| { |
| struct smpro_hwmon *hwmon = dev_get_drvdata(dev); |
| unsigned int value; |
| int ret; |
| |
| switch (attr) { |
| case hwmon_curr_input: |
| ret = regmap_read(hwmon->regmap, curr_sensor[channel].reg, &value); |
| if (ret < 0) |
| return ret; |
| /* Scale reported by the hardware is 1mA */ |
| *val = value & 0x7fff; |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int smpro_read_power(struct device *dev, u32 attr, int channel, long *val_pwr) |
| { |
| struct smpro_hwmon *hwmon = dev_get_drvdata(dev); |
| unsigned int val = 0, val_mw = 0; |
| int ret; |
| |
| switch (attr) { |
| case hwmon_power_input: |
| ret = regmap_read(hwmon->regmap, power[channel].reg, &val); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(hwmon->regmap, power[channel].reg_ext, &val_mw); |
| if (ret) |
| return ret; |
| /* 10-bit value */ |
| *val_pwr = (val & 0x3ff) * 1000000 + (val_mw & 0x3ff) * 1000; |
| return 0; |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int smpro_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| switch (type) { |
| case hwmon_temp: |
| return smpro_read_temp(dev, attr, channel, val); |
| case hwmon_in: |
| return smpro_read_in(dev, attr, channel, val); |
| case hwmon_power: |
| return smpro_read_power(dev, attr, channel, val); |
| case hwmon_curr: |
| return smpro_read_curr(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int smpro_read_string(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, const char **str) |
| { |
| switch (type) { |
| case hwmon_temp: |
| switch (attr) { |
| case hwmon_temp_label: |
| *str = temperature[channel].label; |
| return 0; |
| default: |
| break; |
| } |
| break; |
| |
| case hwmon_in: |
| switch (attr) { |
| case hwmon_in_label: |
| *str = voltage[channel].label; |
| return 0; |
| default: |
| break; |
| } |
| break; |
| |
| case hwmon_curr: |
| switch (attr) { |
| case hwmon_curr_label: |
| *str = curr_sensor[channel].label; |
| return 0; |
| default: |
| break; |
| } |
| break; |
| |
| case hwmon_power: |
| switch (attr) { |
| case hwmon_power_label: |
| *str = power[channel].label; |
| return 0; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return -EOPNOTSUPP; |
| } |
| |
| static umode_t smpro_is_visible(const void *data, enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| const struct smpro_hwmon *hwmon = data; |
| unsigned int value; |
| int ret; |
| |
| switch (type) { |
| case hwmon_temp: |
| switch (attr) { |
| case hwmon_temp_input: |
| case hwmon_temp_label: |
| case hwmon_temp_crit: |
| ret = regmap_read(hwmon->regmap, temperature[channel].reg, &value); |
| if (ret || value == 0xFFFF) |
| return 0; |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return 0444; |
| } |
| |
| static const struct hwmon_channel_info * const smpro_info[] = { |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, |
| HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, |
| HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, |
| HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, |
| HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, |
| HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, |
| HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, |
| HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, |
| HWMON_T_INPUT | HWMON_T_LABEL), |
| HWMON_CHANNEL_INFO(in, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL), |
| HWMON_CHANNEL_INFO(power, |
| HWMON_P_INPUT | HWMON_P_LABEL, |
| HWMON_P_INPUT | HWMON_P_LABEL, |
| HWMON_P_INPUT | HWMON_P_LABEL, |
| HWMON_P_INPUT | HWMON_P_LABEL, |
| HWMON_P_INPUT | HWMON_P_LABEL), |
| HWMON_CHANNEL_INFO(curr, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL), |
| NULL |
| }; |
| |
| static const struct hwmon_ops smpro_hwmon_ops = { |
| .is_visible = smpro_is_visible, |
| .read = smpro_read, |
| .read_string = smpro_read_string, |
| }; |
| |
| static const struct hwmon_chip_info smpro_chip_info = { |
| .ops = &smpro_hwmon_ops, |
| .info = smpro_info, |
| }; |
| |
| static int smpro_hwmon_probe(struct platform_device *pdev) |
| { |
| struct smpro_hwmon *hwmon; |
| struct device *hwmon_dev; |
| |
| hwmon = devm_kzalloc(&pdev->dev, sizeof(struct smpro_hwmon), GFP_KERNEL); |
| if (!hwmon) |
| return -ENOMEM; |
| |
| hwmon->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!hwmon->regmap) |
| return -ENODEV; |
| |
| hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, "smpro_hwmon", |
| hwmon, &smpro_chip_info, NULL); |
| |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static struct platform_driver smpro_hwmon_driver = { |
| .probe = smpro_hwmon_probe, |
| .driver = { |
| .name = "smpro-hwmon", |
| }, |
| }; |
| |
| module_platform_driver(smpro_hwmon_driver); |
| |
| MODULE_AUTHOR("Thu Nguyen <thu@os.amperecomputing.com>"); |
| MODULE_AUTHOR("Quan Nguyen <quan@os.amperecomputing.com>"); |
| MODULE_DESCRIPTION("Ampere Altra SMPro hwmon driver"); |
| MODULE_LICENSE("GPL"); |