drivers/input/touchscreen/ti_am335x_tsc.c - linux - Git at Google

 /*
  * TI Touch Screen driver
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation version 2.
  *
  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  * kind, whether express or implied; without even the implied warranty
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */


 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/input.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/sort.h>
 #include <linux/pm_wakeirq.h>

 #include <linux/mfd/ti_am335x_tscadc.h>

 #define ADCFSM_STEPID		0x10
 #define SEQ_SETTLE		275
 #define MAX_12BIT		((1 << 12) - 1)

 #define TSC_IRQENB_MASK		(IRQENB_FIFO0THRES | IRQENB_EOS | IRQENB_HW_PEN)

 static const int config_pins[] = {
 	STEPCONFIG_XPP,
 	STEPCONFIG_XNN,
 	STEPCONFIG_YPP,
 	STEPCONFIG_YNN,
 };

 struct titsc {
 	struct input_dev	*input;
 	struct ti_tscadc_dev	*mfd_tscadc;
 	struct device		*dev;
 	unsigned int		irq;
 	unsigned int		wires;
 	unsigned int		x_plate_resistance;
 	bool			pen_down;
 	int			coordinate_readouts;
 	u32			config_inp[4];
 	u32			bit_xp, bit_xn, bit_yp, bit_yn;
 	u32			inp_xp, inp_xn, inp_yp, inp_yn;
 	u32			step_mask;
 	u32			charge_delay;
 };

 static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
 {
 	return readl(ts->mfd_tscadc->tscadc_base + reg);
 }

 static void titsc_writel(struct titsc *tsc, unsigned int reg,
 					unsigned int val)
 {
 	writel(val, tsc->mfd_tscadc->tscadc_base + reg);
 }

 static int titsc_config_wires(struct titsc *ts_dev)
 {
 	u32 analog_line[4];
 	u32 wire_order[4];
 	int i, bit_cfg;

 	for (i = 0; i < 4; i++) {
 		/*
 		 * Get the order in which TSC wires are attached
 		 * w.r.t. each of the analog input lines on the EVM.
 		 */
 		analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4;
 		wire_order[i] = ts_dev->config_inp[i] & 0x0F;
 		if (WARN_ON(analog_line[i] > 7))
 			return -EINVAL;
 		if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins)))
 			return -EINVAL;
 	}

 	for (i = 0; i < 4; i++) {
 		int an_line;
 		int wi_order;

 		an_line = analog_line[i];
 		wi_order = wire_order[i];
 		bit_cfg = config_pins[wi_order];
 		if (bit_cfg == 0)
 			return -EINVAL;
 		switch (wi_order) {
 		case 0:
 			ts_dev->bit_xp = bit_cfg;
 			ts_dev->inp_xp = an_line;
 			break;

 		case 1:
 			ts_dev->bit_xn = bit_cfg;
 			ts_dev->inp_xn = an_line;
 			break;

 		case 2:
 			ts_dev->bit_yp = bit_cfg;
 			ts_dev->inp_yp = an_line;
 			break;
 		case 3:
 			ts_dev->bit_yn = bit_cfg;
 			ts_dev->inp_yn = an_line;
 			break;
 		}
 	}
 	return 0;
 }

 static void titsc_step_config(struct titsc *ts_dev)
 {
 	unsigned int	config;
 	int i, n;
 	int end_step, first_step, tsc_steps;
 	u32 stepenable;

 	config = STEPCONFIG_MODE_HWSYNC |
 			STEPCONFIG_AVG_16 | ts_dev->bit_xp |
 			STEPCONFIG_INM_ADCREFM;
 	switch (ts_dev->wires) {
 	case 4:
 		config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
 		break;
 	case 5:
 		config |= ts_dev->bit_yn |
 				STEPCONFIG_INP_AN4 | ts_dev->bit_xn |
 				ts_dev->bit_yp;
 		break;
 	case 8:
 		config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
 		break;
 	}

 	tsc_steps = ts_dev->coordinate_readouts * 2 + 2;
 	first_step = TOTAL_STEPS - tsc_steps;
 	/* Steps 16 to 16-coordinate_readouts is for X */
 	end_step = first_step + tsc_steps;
 	n = 0;
 	for (i = end_step - ts_dev->coordinate_readouts; i < end_step; i++) {
 		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
 		titsc_writel(ts_dev, REG_STEPDELAY(i),
 			     n++ == 0 ? STEPCONFIG_OPENDLY : 0);
 	}

 	config = 0;
 	config = STEPCONFIG_MODE_HWSYNC |
 			STEPCONFIG_AVG_16 | ts_dev->bit_yn |
 			STEPCONFIG_INM_ADCREFM;
 	switch (ts_dev->wires) {
 	case 4:
 		config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
 		break;
 	case 5:
 		config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
 				STEPCONFIG_XNP | STEPCONFIG_YPN;
 		break;
 	case 8:
 		config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
 		break;
 	}

 	/* 1 ... coordinate_readouts is for Y */
 	end_step = first_step + ts_dev->coordinate_readouts;
 	n = 0;
 	for (i = first_step; i < end_step; i++) {
 		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
 		titsc_writel(ts_dev, REG_STEPDELAY(i),
 			     n++ == 0 ? STEPCONFIG_OPENDLY : 0);
 	}

 	/* Make CHARGECONFIG same as IDLECONFIG */

 	config = titsc_readl(ts_dev, REG_IDLECONFIG);
 	titsc_writel(ts_dev, REG_CHARGECONFIG, config);
 	titsc_writel(ts_dev, REG_CHARGEDELAY, ts_dev->charge_delay);

 	/* coordinate_readouts + 1 ... coordinate_readouts + 2 is for Z */
 	config = STEPCONFIG_MODE_HWSYNC |
 			STEPCONFIG_AVG_16 | ts_dev->bit_yp |
 			ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
 			STEPCONFIG_INP(ts_dev->inp_xp);
 	titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
 	titsc_writel(ts_dev, REG_STEPDELAY(end_step),
 			STEPCONFIG_OPENDLY);

 	end_step++;
 	config = STEPCONFIG_MODE_HWSYNC |
 			STEPCONFIG_AVG_16 | ts_dev->bit_yp |
 			ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
 			STEPCONFIG_INP(ts_dev->inp_yn);
 	titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
 	titsc_writel(ts_dev, REG_STEPDELAY(end_step),
 			STEPCONFIG_OPENDLY);

 	/* The steps end ... end - readouts * 2 + 2 and bit 0 for TS_Charge */
 	stepenable = 1;
 	for (i = 0; i < tsc_steps; i++)
 		stepenable |= 1 << (first_step + i + 1);

 	ts_dev->step_mask = stepenable;
 	am335x_tsc_se_set_cache(ts_dev->mfd_tscadc, ts_dev->step_mask);
 }

 static int titsc_cmp_coord(const void *a, const void *b)
 {
 	return *(int *)a - *(int *)b;
 }

 static void titsc_read_coordinates(struct titsc *ts_dev,
 		u32 *x, u32 *y, u32 *z1, u32 *z2)
 {
 	unsigned int yvals[7], xvals[7];
 	unsigned int i, xsum = 0, ysum = 0;
 	unsigned int creads = ts_dev->coordinate_readouts;

 	for (i = 0; i < creads; i++) {
 		yvals[i] = titsc_readl(ts_dev, REG_FIFO0);
 		yvals[i] &= 0xfff;
 	}

 	*z1 = titsc_readl(ts_dev, REG_FIFO0);
 	*z1 &= 0xfff;
 	*z2 = titsc_readl(ts_dev, REG_FIFO0);
 	*z2 &= 0xfff;

 	for (i = 0; i < creads; i++) {
 		xvals[i] = titsc_readl(ts_dev, REG_FIFO0);
 		xvals[i] &= 0xfff;
 	}

 	/*
 	 * If co-ordinates readouts is less than 4 then
 	 * report the average. In case of 4 or more
 	 * readouts, sort the co-ordinate samples, drop
 	 * min and max values and report the average of
 	 * remaining values.
 	 */
 	if (creads <=  3) {
 		for (i = 0; i < creads; i++) {
 			ysum += yvals[i];
 			xsum += xvals[i];
 		}
 		ysum /= creads;
 		xsum /= creads;
 	} else {
 		sort(yvals, creads, sizeof(unsigned int),
 		     titsc_cmp_coord, NULL);
 		sort(xvals, creads, sizeof(unsigned int),
 		     titsc_cmp_coord, NULL);
 		for (i = 1; i < creads - 1; i++) {
 			ysum += yvals[i];
 			xsum += xvals[i];
 		}
 		ysum /= creads - 2;
 		xsum /= creads - 2;
 	}
 	*y = ysum;
 	*x = xsum;
 }

 static irqreturn_t titsc_irq(int irq, void *dev)
 {
 	struct titsc *ts_dev = dev;
 	struct input_dev *input_dev = ts_dev->input;
 	unsigned int fsm, status, irqclr = 0;
 	unsigned int x = 0, y = 0;
 	unsigned int z1, z2, z;

 	status = titsc_readl(ts_dev, REG_RAWIRQSTATUS);
 	if (status & IRQENB_HW_PEN) {
 		ts_dev->pen_down = true;
 		irqclr |= IRQENB_HW_PEN;
 		pm_stay_awake(ts_dev->dev);
 	}

 	if (status & IRQENB_PENUP) {
 		fsm = titsc_readl(ts_dev, REG_ADCFSM);
 		if (fsm == ADCFSM_STEPID) {
 			ts_dev->pen_down = false;
 			input_report_key(input_dev, BTN_TOUCH, 0);
 			input_report_abs(input_dev, ABS_PRESSURE, 0);
 			input_sync(input_dev);
 			pm_relax(ts_dev->dev);
 		} else {
 			ts_dev->pen_down = true;
 		}
 		irqclr |= IRQENB_PENUP;
 	}

 	if (status & IRQENB_EOS)
 		irqclr |= IRQENB_EOS;

 	/*
 	 * ADC and touchscreen share the IRQ line.
 	 * FIFO1 interrupts are used by ADC. Handle FIFO0 IRQs here only
 	 */
 	if (status & IRQENB_FIFO0THRES) {

 		titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);

 		if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
 			/*
 			 * Calculate pressure using formula
 			 * Resistance(touch) = x plate resistance *
 			 * x position/4096 * ((z2 / z1) - 1)
 			 */
 			z = z1 - z2;
 			z *= x;
 			z *= ts_dev->x_plate_resistance;
 			z /= z2;
 			z = (z + 2047) >> 12;

 			if (z <= MAX_12BIT) {
 				input_report_abs(input_dev, ABS_X, x);
 				input_report_abs(input_dev, ABS_Y, y);
 				input_report_abs(input_dev, ABS_PRESSURE, z);
 				input_report_key(input_dev, BTN_TOUCH, 1);
 				input_sync(input_dev);
 			}
 		}
 		irqclr |= IRQENB_FIFO0THRES;
 	}
 	if (irqclr) {
 		titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
 		if (status & IRQENB_EOS)
 			am335x_tsc_se_set_cache(ts_dev->mfd_tscadc,
 						ts_dev->step_mask);
 		return IRQ_HANDLED;
 	}
 	return IRQ_NONE;
 }

 static int titsc_parse_dt(struct platform_device *pdev,
 					struct titsc *ts_dev)
 {
 	struct device_node *node = pdev->dev.of_node;
 	int err;

 	if (!node)
 		return -EINVAL;

 	err = of_property_read_u32(node, "ti,wires", &ts_dev->wires);
 	if (err < 0)
 		return err;
 	switch (ts_dev->wires) {
 	case 4:
 	case 5:
 	case 8:
 		break;
 	default:
 		return -EINVAL;
 	}

 	err = of_property_read_u32(node, "ti,x-plate-resistance",
 			&ts_dev->x_plate_resistance);
 	if (err < 0)
 		return err;

 	/*
 	 * Try with the new binding first. If it fails, try again with
 	 * bogus, miss-spelled version.
 	 */
 	err = of_property_read_u32(node, "ti,coordinate-readouts",
 			&ts_dev->coordinate_readouts);
 	if (err < 0) {
 		dev_warn(&pdev->dev, "please use 'ti,coordinate-readouts' instead\n");
 		err = of_property_read_u32(node, "ti,coordiante-readouts",
 				&ts_dev->coordinate_readouts);
 	}

 	if (err < 0)
 		return err;

 	if (ts_dev->coordinate_readouts <= 0) {
 		dev_warn(&pdev->dev,
 			 "invalid co-ordinate readouts, resetting it to 5\n");
 		ts_dev->coordinate_readouts = 5;
 	}

 	err = of_property_read_u32(node, "ti,charge-delay",
 				   &ts_dev->charge_delay);
 	/*
 	 * If ti,charge-delay value is not specified, then use
 	 * CHARGEDLY_OPENDLY as the default value.
 	 */
 	if (err < 0) {
 		ts_dev->charge_delay = CHARGEDLY_OPENDLY;
 		dev_warn(&pdev->dev, "ti,charge-delay not specified\n");
 	}

 	return of_property_read_u32_array(node, "ti,wire-config",
 			ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp));
 }

 /*
  * The functions for inserting/removing driver as a module.
  */

 static int titsc_probe(struct platform_device *pdev)
 {
 	struct titsc *ts_dev;
 	struct input_dev *input_dev;
 	struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
 	int err;

 	/* Allocate memory for device */
 	ts_dev = kzalloc(sizeof(*ts_dev), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!ts_dev || !input_dev) {
 		dev_err(&pdev->dev, "failed to allocate memory.\n");
 		err = -ENOMEM;
 		goto err_free_mem;
 	}

 	tscadc_dev->tsc = ts_dev;
 	ts_dev->mfd_tscadc = tscadc_dev;
 	ts_dev->input = input_dev;
 	ts_dev->irq = tscadc_dev->irq;
 	ts_dev->dev = &pdev->dev;

 	err = titsc_parse_dt(pdev, ts_dev);
 	if (err) {
 		dev_err(&pdev->dev, "Could not find valid DT data.\n");
 		goto err_free_mem;
 	}

 	err = request_irq(ts_dev->irq, titsc_irq,
 			  IRQF_SHARED, pdev->dev.driver->name, ts_dev);
 	if (err) {
 		dev_err(&pdev->dev, "failed to allocate irq.\n");
 		goto err_free_mem;
 	}

 	device_init_wakeup(&pdev->dev, true);
 	err = dev_pm_set_wake_irq(&pdev->dev, ts_dev->irq);
 	if (err)
 		dev_err(&pdev->dev, "irq wake enable failed.\n");

 	titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
 	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
 	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_EOS);
 	err = titsc_config_wires(ts_dev);
 	if (err) {
 		dev_err(&pdev->dev, "wrong i/p wire configuration\n");
 		goto err_free_irq;
 	}
 	titsc_step_config(ts_dev);
 	titsc_writel(ts_dev, REG_FIFO0THR,
 			ts_dev->coordinate_readouts * 2 + 2 - 1);

 	input_dev->name = "ti-tsc";
 	input_dev->dev.parent = &pdev->dev;

 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);

 	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
 	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);

 	/* register to the input system */
 	err = input_register_device(input_dev);
 	if (err)
 		goto err_free_irq;

 	platform_set_drvdata(pdev, ts_dev);
 	return 0;

 err_free_irq:
 	dev_pm_clear_wake_irq(&pdev->dev);
 	device_init_wakeup(&pdev->dev, false);
 	free_irq(ts_dev->irq, ts_dev);
 err_free_mem:
 	input_free_device(input_dev);
 	kfree(ts_dev);
 	return err;
 }

 static void titsc_remove(struct platform_device *pdev)
 {
 	struct titsc *ts_dev = platform_get_drvdata(pdev);
 	u32 steps;

 	dev_pm_clear_wake_irq(&pdev->dev);
 	device_init_wakeup(&pdev->dev, false);
 	free_irq(ts_dev->irq, ts_dev);

 	/* total steps followed by the enable mask */
 	steps = 2 * ts_dev->coordinate_readouts + 2;
 	steps = (1 << steps) - 1;
 	am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps);

 	input_unregister_device(ts_dev->input);

 	kfree(ts_dev);
 }

 static int titsc_suspend(struct device *dev)
 {
 	struct titsc *ts_dev = dev_get_drvdata(dev);
 	unsigned int idle;

 	if (device_may_wakeup(dev)) {
 		titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
 		idle = titsc_readl(ts_dev, REG_IRQENABLE);
 		titsc_writel(ts_dev, REG_IRQENABLE,
 				(idle | IRQENB_HW_PEN));
 		titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
 	}
 	return 0;
 }

 static int titsc_resume(struct device *dev)
 {
 	struct titsc *ts_dev = dev_get_drvdata(dev);

 	if (device_may_wakeup(dev)) {
 		titsc_writel(ts_dev, REG_IRQWAKEUP,
 				0x00);
 		titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
 		pm_relax(dev);
 	}
 	titsc_step_config(ts_dev);
 	titsc_writel(ts_dev, REG_FIFO0THR,
 			ts_dev->coordinate_readouts * 2 + 2 - 1);
 	return 0;
 }

 static DEFINE_SIMPLE_DEV_PM_OPS(titsc_pm_ops, titsc_suspend, titsc_resume);

 static const struct of_device_id ti_tsc_dt_ids[] = {
 	{ .compatible = "ti,am3359-tsc", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids);

 static struct platform_driver ti_tsc_driver = {
 	.probe	= titsc_probe,
 	.remove_new = titsc_remove,
 	.driver	= {
 		.name   = "TI-am335x-tsc",
 		.pm	= pm_sleep_ptr(&titsc_pm_ops),
 		.of_match_table = ti_tsc_dt_ids,
 	},
 };
 module_platform_driver(ti_tsc_driver);

 MODULE_DESCRIPTION("TI touchscreen controller driver");
 MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
 MODULE_LICENSE("GPL");
	/*
	* TI Touch Screen driver
	*
	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation version 2.
	*
	* This program is distributed "as is" WITHOUT ANY WARRANTY of any
	* kind, whether express or implied; without even the implied warranty
	* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/


	#include <linux/kernel.h>
	#include <linux/err.h>
	#include <linux/module.h>
	#include <linux/input.h>
	#include <linux/slab.h>
	#include <linux/interrupt.h>
	#include <linux/clk.h>
	#include <linux/platform_device.h>
	#include <linux/io.h>
	#include <linux/delay.h>
	#include <linux/of.h>
	#include <linux/sort.h>
	#include <linux/pm_wakeirq.h>

	#include <linux/mfd/ti_am335x_tscadc.h>

	#define ADCFSM_STEPID 0x10
	#define SEQ_SETTLE 275
	#define MAX_12BIT ((1 << 12) - 1)

	#define TSC_IRQENB_MASK (IRQENB_FIFO0THRES \| IRQENB_EOS \| IRQENB_HW_PEN)

	static const int config_pins[] = {
	STEPCONFIG_XPP,
	STEPCONFIG_XNN,
	STEPCONFIG_YPP,
	STEPCONFIG_YNN,
	};

	struct titsc {
	struct input_dev *input;
	struct ti_tscadc_dev *mfd_tscadc;
	struct device *dev;
	unsigned int irq;
	unsigned int wires;
	unsigned int x_plate_resistance;
	bool pen_down;
	int coordinate_readouts;
	u32 config_inp[4];
	u32 bit_xp, bit_xn, bit_yp, bit_yn;
	u32 inp_xp, inp_xn, inp_yp, inp_yn;
	u32 step_mask;
	u32 charge_delay;
	};

	static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
	{
	return readl(ts->mfd_tscadc->tscadc_base + reg);
	}

	static void titsc_writel(struct titsc *tsc, unsigned int reg,
	unsigned int val)
	{
	writel(val, tsc->mfd_tscadc->tscadc_base + reg);
	}

	static int titsc_config_wires(struct titsc *ts_dev)
	{
	u32 analog_line[4];
	u32 wire_order[4];
	int i, bit_cfg;

	for (i = 0; i < 4; i++) {
	/*
	* Get the order in which TSC wires are attached
	* w.r.t. each of the analog input lines on the EVM.
	*/
	analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4;
	wire_order[i] = ts_dev->config_inp[i] & 0x0F;
	if (WARN_ON(analog_line[i] > 7))
	return -EINVAL;
	if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins)))
	return -EINVAL;
	}

	for (i = 0; i < 4; i++) {
	int an_line;
	int wi_order;

	an_line = analog_line[i];
	wi_order = wire_order[i];
	bit_cfg = config_pins[wi_order];
	if (bit_cfg == 0)
	return -EINVAL;
	switch (wi_order) {
	case 0:
	ts_dev->bit_xp = bit_cfg;
	ts_dev->inp_xp = an_line;
	break;

	case 1:
	ts_dev->bit_xn = bit_cfg;
	ts_dev->inp_xn = an_line;
	break;

	case 2:
	ts_dev->bit_yp = bit_cfg;
	ts_dev->inp_yp = an_line;
	break;
	case 3:
	ts_dev->bit_yn = bit_cfg;
	ts_dev->inp_yn = an_line;
	break;
	}
	}
	return 0;
	}

	static void titsc_step_config(struct titsc *ts_dev)
	{
	unsigned int config;
	int i, n;
	int end_step, first_step, tsc_steps;
	u32 stepenable;

	config = STEPCONFIG_MODE_HWSYNC \|
	STEPCONFIG_AVG_16 \| ts_dev->bit_xp \|
	STEPCONFIG_INM_ADCREFM;
	switch (ts_dev->wires) {
	case 4:
	config \|= STEPCONFIG_INP(ts_dev->inp_yp) \| ts_dev->bit_xn;
	break;
	case 5:
	config \|= ts_dev->bit_yn \|
	STEPCONFIG_INP_AN4 \| ts_dev->bit_xn \|
	ts_dev->bit_yp;
	break;
	case 8:
	config \|= STEPCONFIG_INP(ts_dev->inp_yp) \| ts_dev->bit_xn;
	break;
	}

	tsc_steps = ts_dev->coordinate_readouts * 2 + 2;
	first_step = TOTAL_STEPS - tsc_steps;
	/* Steps 16 to 16-coordinate_readouts is for X */
	end_step = first_step + tsc_steps;
	n = 0;
	for (i = end_step - ts_dev->coordinate_readouts; i < end_step; i++) {
	titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
	titsc_writel(ts_dev, REG_STEPDELAY(i),
	n++ == 0 ? STEPCONFIG_OPENDLY : 0);
	}

	config = 0;
	config = STEPCONFIG_MODE_HWSYNC \|
	STEPCONFIG_AVG_16 \| ts_dev->bit_yn \|
	STEPCONFIG_INM_ADCREFM;
	switch (ts_dev->wires) {
	case 4:
	config \|= ts_dev->bit_yp \| STEPCONFIG_INP(ts_dev->inp_xp);
	break;
	case 5:
	config \|= ts_dev->bit_xp \| STEPCONFIG_INP_AN4 \|
	STEPCONFIG_XNP \| STEPCONFIG_YPN;
	break;
	case 8:
	config \|= ts_dev->bit_yp \| STEPCONFIG_INP(ts_dev->inp_xp);
	break;
	}

	/* 1 ... coordinate_readouts is for Y */
	end_step = first_step + ts_dev->coordinate_readouts;
	n = 0;
	for (i = first_step; i < end_step; i++) {
	titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
	titsc_writel(ts_dev, REG_STEPDELAY(i),
	n++ == 0 ? STEPCONFIG_OPENDLY : 0);
	}

	/* Make CHARGECONFIG same as IDLECONFIG */

	config = titsc_readl(ts_dev, REG_IDLECONFIG);
	titsc_writel(ts_dev, REG_CHARGECONFIG, config);
	titsc_writel(ts_dev, REG_CHARGEDELAY, ts_dev->charge_delay);

	/* coordinate_readouts + 1 ... coordinate_readouts + 2 is for Z */
	config = STEPCONFIG_MODE_HWSYNC \|
	STEPCONFIG_AVG_16 \| ts_dev->bit_yp \|
	ts_dev->bit_xn \| STEPCONFIG_INM_ADCREFM \|
	STEPCONFIG_INP(ts_dev->inp_xp);
	titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
	titsc_writel(ts_dev, REG_STEPDELAY(end_step),
	STEPCONFIG_OPENDLY);

	end_step++;
	config = STEPCONFIG_MODE_HWSYNC \|
	STEPCONFIG_AVG_16 \| ts_dev->bit_yp \|
	ts_dev->bit_xn \| STEPCONFIG_INM_ADCREFM \|
	STEPCONFIG_INP(ts_dev->inp_yn);
	titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
	titsc_writel(ts_dev, REG_STEPDELAY(end_step),
	STEPCONFIG_OPENDLY);

	/* The steps end ... end - readouts * 2 + 2 and bit 0 for TS_Charge */
	stepenable = 1;
	for (i = 0; i < tsc_steps; i++)
	stepenable \|= 1 << (first_step + i + 1);

	ts_dev->step_mask = stepenable;
	am335x_tsc_se_set_cache(ts_dev->mfd_tscadc, ts_dev->step_mask);
	}

	static int titsc_cmp_coord(const void a, const void b)
	{
	return (int )a - (int )b;
	}

	static void titsc_read_coordinates(struct titsc *ts_dev,
	u32 x, u32 y, u32 z1, u32 z2)
	{
	unsigned int yvals[7], xvals[7];
	unsigned int i, xsum = 0, ysum = 0;
	unsigned int creads = ts_dev->coordinate_readouts;

	for (i = 0; i < creads; i++) {
	yvals[i] = titsc_readl(ts_dev, REG_FIFO0);
	yvals[i] &= 0xfff;
	}

	*z1 = titsc_readl(ts_dev, REG_FIFO0);
	*z1 &= 0xfff;
	*z2 = titsc_readl(ts_dev, REG_FIFO0);
	*z2 &= 0xfff;

	for (i = 0; i < creads; i++) {
	xvals[i] = titsc_readl(ts_dev, REG_FIFO0);
	xvals[i] &= 0xfff;
	}

	/*
	* If co-ordinates readouts is less than 4 then
	* report the average. In case of 4 or more
	* readouts, sort the co-ordinate samples, drop
	* min and max values and report the average of
	* remaining values.
	*/
	if (creads <= 3) {
	for (i = 0; i < creads; i++) {
	ysum += yvals[i];
	xsum += xvals[i];
	}
	ysum /= creads;
	xsum /= creads;
	} else {
	sort(yvals, creads, sizeof(unsigned int),
	titsc_cmp_coord, NULL);
	sort(xvals, creads, sizeof(unsigned int),
	titsc_cmp_coord, NULL);
	for (i = 1; i < creads - 1; i++) {
	ysum += yvals[i];
	xsum += xvals[i];
	}
	ysum /= creads - 2;
	xsum /= creads - 2;
	}
	*y = ysum;
	*x = xsum;
	}

	static irqreturn_t titsc_irq(int irq, void *dev)
	{
	struct titsc *ts_dev = dev;
	struct input_dev *input_dev = ts_dev->input;
	unsigned int fsm, status, irqclr = 0;
	unsigned int x = 0, y = 0;
	unsigned int z1, z2, z;

	status = titsc_readl(ts_dev, REG_RAWIRQSTATUS);
	if (status & IRQENB_HW_PEN) {
	ts_dev->pen_down = true;
	irqclr \|= IRQENB_HW_PEN;
	pm_stay_awake(ts_dev->dev);
	}

	if (status & IRQENB_PENUP) {
	fsm = titsc_readl(ts_dev, REG_ADCFSM);
	if (fsm == ADCFSM_STEPID) {
	ts_dev->pen_down = false;
	input_report_key(input_dev, BTN_TOUCH, 0);
	input_report_abs(input_dev, ABS_PRESSURE, 0);
	input_sync(input_dev);
	pm_relax(ts_dev->dev);
	} else {
	ts_dev->pen_down = true;
	}
	irqclr \|= IRQENB_PENUP;
	}

	if (status & IRQENB_EOS)
	irqclr \|= IRQENB_EOS;

	/*
	* ADC and touchscreen share the IRQ line.
	* FIFO1 interrupts are used by ADC. Handle FIFO0 IRQs here only
	*/
	if (status & IRQENB_FIFO0THRES) {

	titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);

	if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
	/*
	* Calculate pressure using formula
	* Resistance(touch) = x plate resistance *
	* x position/4096 * ((z2 / z1) - 1)
	*/
	z = z1 - z2;
	z *= x;
	z *= ts_dev->x_plate_resistance;
	z /= z2;
	z = (z + 2047) >> 12;

	if (z <= MAX_12BIT) {
	input_report_abs(input_dev, ABS_X, x);
	input_report_abs(input_dev, ABS_Y, y);
	input_report_abs(input_dev, ABS_PRESSURE, z);
	input_report_key(input_dev, BTN_TOUCH, 1);
	input_sync(input_dev);
	}
	}
	irqclr \|= IRQENB_FIFO0THRES;
	}
	if (irqclr) {
	titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
	if (status & IRQENB_EOS)
	am335x_tsc_se_set_cache(ts_dev->mfd_tscadc,
	ts_dev->step_mask);
	return IRQ_HANDLED;
	}
	return IRQ_NONE;
	}

	static int titsc_parse_dt(struct platform_device *pdev,
	struct titsc *ts_dev)
	{
	struct device_node *node = pdev->dev.of_node;
	int err;

	if (!node)
	return -EINVAL;

	err = of_property_read_u32(node, "ti,wires", &ts_dev->wires);
	if (err < 0)
	return err;
	switch (ts_dev->wires) {
	case 4:
	case 5:
	case 8:
	break;
	default:
	return -EINVAL;
	}

	err = of_property_read_u32(node, "ti,x-plate-resistance",
	&ts_dev->x_plate_resistance);
	if (err < 0)
	return err;

	/*
	* Try with the new binding first. If it fails, try again with
	* bogus, miss-spelled version.
	*/
	err = of_property_read_u32(node, "ti,coordinate-readouts",
	&ts_dev->coordinate_readouts);
	if (err < 0) {
	dev_warn(&pdev->dev, "please use 'ti,coordinate-readouts' instead\n");
	err = of_property_read_u32(node, "ti,coordiante-readouts",
	&ts_dev->coordinate_readouts);
	}

	if (err < 0)
	return err;

	if (ts_dev->coordinate_readouts <= 0) {
	dev_warn(&pdev->dev,
	"invalid co-ordinate readouts, resetting it to 5\n");
	ts_dev->coordinate_readouts = 5;
	}

	err = of_property_read_u32(node, "ti,charge-delay",
	&ts_dev->charge_delay);
	/*
	* If ti,charge-delay value is not specified, then use
	* CHARGEDLY_OPENDLY as the default value.
	*/
	if (err < 0) {
	ts_dev->charge_delay = CHARGEDLY_OPENDLY;
	dev_warn(&pdev->dev, "ti,charge-delay not specified\n");
	}

	return of_property_read_u32_array(node, "ti,wire-config",
	ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp));
	}

	/*
	* The functions for inserting/removing driver as a module.
	*/

	static int titsc_probe(struct platform_device *pdev)
	{
	struct titsc *ts_dev;
	struct input_dev *input_dev;
	struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
	int err;

	/* Allocate memory for device */
	ts_dev = kzalloc(sizeof(*ts_dev), GFP_KERNEL);
	input_dev = input_allocate_device();
	if (!ts_dev \|\| !input_dev) {
	dev_err(&pdev->dev, "failed to allocate memory.\n");
	err = -ENOMEM;
	goto err_free_mem;
	}

	tscadc_dev->tsc = ts_dev;
	ts_dev->mfd_tscadc = tscadc_dev;
	ts_dev->input = input_dev;
	ts_dev->irq = tscadc_dev->irq;
	ts_dev->dev = &pdev->dev;

	err = titsc_parse_dt(pdev, ts_dev);
	if (err) {
	dev_err(&pdev->dev, "Could not find valid DT data.\n");
	goto err_free_mem;
	}

	err = request_irq(ts_dev->irq, titsc_irq,
	IRQF_SHARED, pdev->dev.driver->name, ts_dev);
	if (err) {
	dev_err(&pdev->dev, "failed to allocate irq.\n");
	goto err_free_mem;
	}

	device_init_wakeup(&pdev->dev, true);
	err = dev_pm_set_wake_irq(&pdev->dev, ts_dev->irq);
	if (err)
	dev_err(&pdev->dev, "irq wake enable failed.\n");

	titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_EOS);
	err = titsc_config_wires(ts_dev);
	if (err) {
	dev_err(&pdev->dev, "wrong i/p wire configuration\n");
	goto err_free_irq;
	}
	titsc_step_config(ts_dev);
	titsc_writel(ts_dev, REG_FIFO0THR,
	ts_dev->coordinate_readouts * 2 + 2 - 1);

	input_dev->name = "ti-tsc";
	input_dev->dev.parent = &pdev->dev;

	input_dev->evbit[0] = BIT_MASK(EV_KEY) \| BIT_MASK(EV_ABS);
	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);

	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);

	/* register to the input system */
	err = input_register_device(input_dev);
	if (err)
	goto err_free_irq;

	platform_set_drvdata(pdev, ts_dev);
	return 0;

	err_free_irq:
	dev_pm_clear_wake_irq(&pdev->dev);
	device_init_wakeup(&pdev->dev, false);
	free_irq(ts_dev->irq, ts_dev);
	err_free_mem:
	input_free_device(input_dev);
	kfree(ts_dev);
	return err;
	}

	static void titsc_remove(struct platform_device *pdev)
	{
	struct titsc *ts_dev = platform_get_drvdata(pdev);
	u32 steps;

	dev_pm_clear_wake_irq(&pdev->dev);
	device_init_wakeup(&pdev->dev, false);
	free_irq(ts_dev->irq, ts_dev);

	/* total steps followed by the enable mask */
	steps = 2 * ts_dev->coordinate_readouts + 2;
	steps = (1 << steps) - 1;
	am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps);

	input_unregister_device(ts_dev->input);

	kfree(ts_dev);
	}

	static int titsc_suspend(struct device *dev)
	{
	struct titsc *ts_dev = dev_get_drvdata(dev);
	unsigned int idle;

	if (device_may_wakeup(dev)) {
	titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
	idle = titsc_readl(ts_dev, REG_IRQENABLE);
	titsc_writel(ts_dev, REG_IRQENABLE,
	(idle \| IRQENB_HW_PEN));
	titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
	}
	return 0;
	}

	static int titsc_resume(struct device *dev)
	{
	struct titsc *ts_dev = dev_get_drvdata(dev);

	if (device_may_wakeup(dev)) {
	titsc_writel(ts_dev, REG_IRQWAKEUP,
	0x00);
	titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
	pm_relax(dev);
	}
	titsc_step_config(ts_dev);
	titsc_writel(ts_dev, REG_FIFO0THR,
	ts_dev->coordinate_readouts * 2 + 2 - 1);
	return 0;
	}

	static DEFINE_SIMPLE_DEV_PM_OPS(titsc_pm_ops, titsc_suspend, titsc_resume);

	static const struct of_device_id ti_tsc_dt_ids[] = {
	{ .compatible = "ti,am3359-tsc", },
	{ }
	};
	MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids);

	static struct platform_driver ti_tsc_driver = {
	.probe = titsc_probe,
	.remove_new = titsc_remove,
	.driver = {
	.name = "TI-am335x-tsc",
	.pm = pm_sleep_ptr(&titsc_pm_ops),
	.of_match_table = ti_tsc_dt_ids,
	},
	};
	module_platform_driver(ti_tsc_driver);

	MODULE_DESCRIPTION("TI touchscreen controller driver");
	MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
	MODULE_LICENSE("GPL");