| // SPDX-License-Identifier: GPL-2.0-only |
| // |
| // CS35L56 ALSA SoC audio driver SoundWire binding |
| // |
| // Copyright (C) 2023 Cirrus Logic, Inc. and |
| // Cirrus Logic International Semiconductor Ltd. |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/soundwire/sdw.h> |
| #include <linux/soundwire/sdw_registers.h> |
| #include <linux/soundwire/sdw_type.h> |
| #include <linux/swab.h> |
| #include <linux/types.h> |
| #include <linux/workqueue.h> |
| |
| #include "cs35l56.h" |
| |
| /* Register addresses are offset when sent over SoundWire */ |
| #define CS35L56_SDW_ADDR_OFFSET 0x8000 |
| |
| static int cs35l56_sdw_read_one(struct sdw_slave *peripheral, unsigned int reg, void *buf) |
| { |
| int ret; |
| |
| ret = sdw_nread_no_pm(peripheral, reg, 4, (u8 *)buf); |
| if (ret != 0) { |
| dev_err(&peripheral->dev, "Read failed @%#x:%d\n", reg, ret); |
| return ret; |
| } |
| |
| swab32s((u32 *)buf); |
| |
| return 0; |
| } |
| |
| static int cs35l56_sdw_read(void *context, const void *reg_buf, |
| const size_t reg_size, void *val_buf, |
| size_t val_size) |
| { |
| struct sdw_slave *peripheral = context; |
| u8 *buf8 = val_buf; |
| unsigned int reg, bytes; |
| int ret; |
| |
| reg = le32_to_cpu(*(const __le32 *)reg_buf); |
| reg += CS35L56_SDW_ADDR_OFFSET; |
| |
| if (val_size == 4) |
| return cs35l56_sdw_read_one(peripheral, reg, val_buf); |
| |
| while (val_size) { |
| bytes = SDW_REG_NO_PAGE - (reg & SDW_REGADDR); /* to end of page */ |
| if (bytes > val_size) |
| bytes = val_size; |
| |
| ret = sdw_nread_no_pm(peripheral, reg, bytes, buf8); |
| if (ret != 0) { |
| dev_err(&peripheral->dev, "Read failed @%#x..%#x:%d\n", |
| reg, reg + bytes - 1, ret); |
| return ret; |
| } |
| |
| swab32_array((u32 *)buf8, bytes / 4); |
| val_size -= bytes; |
| reg += bytes; |
| buf8 += bytes; |
| } |
| |
| return 0; |
| } |
| |
| static inline void cs35l56_swab_copy(void *dest, const void *src, size_t nbytes) |
| { |
| u32 *dest32 = dest; |
| const u32 *src32 = src; |
| |
| for (; nbytes > 0; nbytes -= 4) |
| *dest32++ = swab32(*src32++); |
| } |
| |
| static int cs35l56_sdw_write_one(struct sdw_slave *peripheral, unsigned int reg, const void *buf) |
| { |
| u32 val_le = swab32(*(u32 *)buf); |
| int ret; |
| |
| ret = sdw_nwrite_no_pm(peripheral, reg, 4, (u8 *)&val_le); |
| if (ret != 0) { |
| dev_err(&peripheral->dev, "Write failed @%#x:%d\n", reg, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int cs35l56_sdw_gather_write(void *context, |
| const void *reg_buf, size_t reg_size, |
| const void *val_buf, size_t val_size) |
| { |
| struct sdw_slave *peripheral = context; |
| const u8 *src_be = val_buf; |
| u32 val_le_buf[64]; /* Define u32 so it is 32-bit aligned */ |
| unsigned int reg, bytes; |
| int ret; |
| |
| reg = le32_to_cpu(*(const __le32 *)reg_buf); |
| reg += CS35L56_SDW_ADDR_OFFSET; |
| |
| if (val_size == 4) |
| return cs35l56_sdw_write_one(peripheral, reg, src_be); |
| |
| while (val_size) { |
| bytes = SDW_REG_NO_PAGE - (reg & SDW_REGADDR); /* to end of page */ |
| if (bytes > val_size) |
| bytes = val_size; |
| if (bytes > sizeof(val_le_buf)) |
| bytes = sizeof(val_le_buf); |
| |
| cs35l56_swab_copy(val_le_buf, src_be, bytes); |
| |
| ret = sdw_nwrite_no_pm(peripheral, reg, bytes, (u8 *)val_le_buf); |
| if (ret != 0) { |
| dev_err(&peripheral->dev, "Write failed @%#x..%#x:%d\n", |
| reg, reg + bytes - 1, ret); |
| return ret; |
| } |
| |
| val_size -= bytes; |
| reg += bytes; |
| src_be += bytes; |
| } |
| |
| return 0; |
| } |
| |
| static int cs35l56_sdw_write(void *context, const void *val_buf, size_t val_size) |
| { |
| const u8 *src_buf = val_buf; |
| |
| /* First word of val_buf contains the destination address */ |
| return cs35l56_sdw_gather_write(context, &src_buf[0], 4, &src_buf[4], val_size - 4); |
| } |
| |
| /* |
| * Registers are big-endian on I2C and SPI but little-endian on SoundWire. |
| * Exported firmware controls are big-endian on I2C/SPI but little-endian on |
| * SoundWire. Firmware files are always big-endian and are opaque blobs. |
| * Present a big-endian regmap and hide the endianness swap, so that the ALSA |
| * byte controls always have the same byte order, and firmware file blobs |
| * can be written verbatim. |
| */ |
| static const struct regmap_bus cs35l56_regmap_bus_sdw = { |
| .read = cs35l56_sdw_read, |
| .write = cs35l56_sdw_write, |
| .gather_write = cs35l56_sdw_gather_write, |
| .reg_format_endian_default = REGMAP_ENDIAN_LITTLE, |
| .val_format_endian_default = REGMAP_ENDIAN_BIG, |
| }; |
| |
| static void cs35l56_sdw_init(struct sdw_slave *peripheral) |
| { |
| struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev); |
| int ret; |
| |
| pm_runtime_get_noresume(cs35l56->base.dev); |
| |
| regcache_cache_only(cs35l56->base.regmap, false); |
| |
| ret = cs35l56_init(cs35l56); |
| if (ret < 0) { |
| regcache_cache_only(cs35l56->base.regmap, true); |
| goto out; |
| } |
| |
| /* |
| * cs35l56_init can return with !init_done if it triggered |
| * a soft reset. |
| */ |
| if (cs35l56->base.init_done) { |
| /* Enable SoundWire interrupts */ |
| sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_MASK_1, |
| CS35L56_SDW_INT_MASK_CODEC_IRQ); |
| } |
| |
| out: |
| pm_runtime_mark_last_busy(cs35l56->base.dev); |
| pm_runtime_put_autosuspend(cs35l56->base.dev); |
| } |
| |
| static int cs35l56_sdw_interrupt(struct sdw_slave *peripheral, |
| struct sdw_slave_intr_status *status) |
| { |
| struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev); |
| |
| /* SoundWire core holds our pm_runtime when calling this function. */ |
| |
| dev_dbg(cs35l56->base.dev, "int control_port=%#x\n", status->control_port); |
| |
| if ((status->control_port & SDW_SCP_INT1_IMPL_DEF) == 0) |
| return 0; |
| |
| /* |
| * Prevent bus manager suspending and possibly issuing a |
| * bus-reset before the queued work has run. |
| */ |
| pm_runtime_get_noresume(cs35l56->base.dev); |
| |
| /* |
| * Mask and clear until it has been handled. The read of GEN_INT_STAT_1 |
| * is required as per the SoundWire spec for interrupt status bits |
| * to clear. GEN_INT_MASK_1 masks the _inputs_ to GEN_INT_STAT1. |
| * None of the interrupts are time-critical so use the |
| * power-efficient queue. |
| */ |
| sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_MASK_1, 0); |
| sdw_read_no_pm(peripheral, CS35L56_SDW_GEN_INT_STAT_1); |
| sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_STAT_1, 0xFF); |
| queue_work(system_power_efficient_wq, &cs35l56->sdw_irq_work); |
| |
| return 0; |
| } |
| |
| static void cs35l56_sdw_irq_work(struct work_struct *work) |
| { |
| struct cs35l56_private *cs35l56 = container_of(work, |
| struct cs35l56_private, |
| sdw_irq_work); |
| |
| cs35l56_irq(-1, &cs35l56->base); |
| |
| /* unmask interrupts */ |
| if (!cs35l56->sdw_irq_no_unmask) |
| sdw_write_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_MASK_1, |
| CS35L56_SDW_INT_MASK_CODEC_IRQ); |
| |
| pm_runtime_put_autosuspend(cs35l56->base.dev); |
| } |
| |
| static int cs35l56_sdw_read_prop(struct sdw_slave *peripheral) |
| { |
| struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev); |
| struct sdw_slave_prop *prop = &peripheral->prop; |
| struct sdw_dpn_prop *ports; |
| |
| ports = devm_kcalloc(cs35l56->base.dev, 2, sizeof(*ports), GFP_KERNEL); |
| if (!ports) |
| return -ENOMEM; |
| |
| prop->source_ports = BIT(CS35L56_SDW1_CAPTURE_PORT); |
| prop->sink_ports = BIT(CS35L56_SDW1_PLAYBACK_PORT); |
| prop->paging_support = true; |
| prop->clk_stop_mode1 = false; |
| prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; |
| prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY | SDW_SCP_INT1_IMPL_DEF; |
| |
| /* DP1 - playback */ |
| ports[0].num = CS35L56_SDW1_PLAYBACK_PORT; |
| ports[0].type = SDW_DPN_FULL; |
| ports[0].ch_prep_timeout = 10; |
| prop->sink_dpn_prop = &ports[0]; |
| |
| /* DP3 - capture */ |
| ports[1].num = CS35L56_SDW1_CAPTURE_PORT; |
| ports[1].type = SDW_DPN_FULL; |
| ports[1].ch_prep_timeout = 10; |
| prop->src_dpn_prop = &ports[1]; |
| |
| return 0; |
| } |
| |
| static int cs35l56_sdw_update_status(struct sdw_slave *peripheral, |
| enum sdw_slave_status status) |
| { |
| struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev); |
| |
| switch (status) { |
| case SDW_SLAVE_ATTACHED: |
| dev_dbg(cs35l56->base.dev, "%s: ATTACHED\n", __func__); |
| if (cs35l56->sdw_attached) |
| break; |
| |
| if (!cs35l56->base.init_done || cs35l56->soft_resetting) |
| cs35l56_sdw_init(peripheral); |
| |
| cs35l56->sdw_attached = true; |
| break; |
| case SDW_SLAVE_UNATTACHED: |
| dev_dbg(cs35l56->base.dev, "%s: UNATTACHED\n", __func__); |
| cs35l56->sdw_attached = false; |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int cs35l56_a1_kick_divider(struct cs35l56_private *cs35l56, |
| struct sdw_slave *peripheral) |
| { |
| unsigned int curr_scale_reg, next_scale_reg; |
| int curr_scale, next_scale, ret; |
| |
| if (!cs35l56->base.init_done) |
| return 0; |
| |
| if (peripheral->bus->params.curr_bank) { |
| curr_scale_reg = SDW_SCP_BUSCLOCK_SCALE_B1; |
| next_scale_reg = SDW_SCP_BUSCLOCK_SCALE_B0; |
| } else { |
| curr_scale_reg = SDW_SCP_BUSCLOCK_SCALE_B0; |
| next_scale_reg = SDW_SCP_BUSCLOCK_SCALE_B1; |
| } |
| |
| /* |
| * Current clock scale value must be different to new value. |
| * Modify current to guarantee this. If next still has the dummy |
| * value we wrote when it was current, the core code has not set |
| * a new scale so restore its original good value |
| */ |
| curr_scale = sdw_read_no_pm(peripheral, curr_scale_reg); |
| if (curr_scale < 0) { |
| dev_err(cs35l56->base.dev, "Failed to read current clock scale: %d\n", curr_scale); |
| return curr_scale; |
| } |
| |
| next_scale = sdw_read_no_pm(peripheral, next_scale_reg); |
| if (next_scale < 0) { |
| dev_err(cs35l56->base.dev, "Failed to read next clock scale: %d\n", next_scale); |
| return next_scale; |
| } |
| |
| if (next_scale == CS35L56_SDW_INVALID_BUS_SCALE) { |
| next_scale = cs35l56->old_sdw_clock_scale; |
| ret = sdw_write_no_pm(peripheral, next_scale_reg, next_scale); |
| if (ret < 0) { |
| dev_err(cs35l56->base.dev, "Failed to modify current clock scale: %d\n", |
| ret); |
| return ret; |
| } |
| } |
| |
| cs35l56->old_sdw_clock_scale = curr_scale; |
| ret = sdw_write_no_pm(peripheral, curr_scale_reg, CS35L56_SDW_INVALID_BUS_SCALE); |
| if (ret < 0) { |
| dev_err(cs35l56->base.dev, "Failed to modify current clock scale: %d\n", ret); |
| return ret; |
| } |
| |
| dev_dbg(cs35l56->base.dev, "Next bus scale: %#x\n", next_scale); |
| |
| return 0; |
| } |
| |
| static int cs35l56_sdw_bus_config(struct sdw_slave *peripheral, |
| struct sdw_bus_params *params) |
| { |
| struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev); |
| int sclk; |
| |
| sclk = params->curr_dr_freq / 2; |
| dev_dbg(cs35l56->base.dev, "%s: sclk=%u c=%u r=%u\n", |
| __func__, sclk, params->col, params->row); |
| |
| if (cs35l56->base.rev < 0xb0) |
| return cs35l56_a1_kick_divider(cs35l56, peripheral); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused cs35l56_sdw_clk_stop(struct sdw_slave *peripheral, |
| enum sdw_clk_stop_mode mode, |
| enum sdw_clk_stop_type type) |
| { |
| struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev); |
| |
| dev_dbg(cs35l56->base.dev, "%s: mode:%d type:%d\n", __func__, mode, type); |
| |
| return 0; |
| } |
| |
| static const struct sdw_slave_ops cs35l56_sdw_ops = { |
| .read_prop = cs35l56_sdw_read_prop, |
| .interrupt_callback = cs35l56_sdw_interrupt, |
| .update_status = cs35l56_sdw_update_status, |
| .bus_config = cs35l56_sdw_bus_config, |
| #ifdef DEBUG |
| .clk_stop = cs35l56_sdw_clk_stop, |
| #endif |
| }; |
| |
| static int __maybe_unused cs35l56_sdw_handle_unattach(struct cs35l56_private *cs35l56) |
| { |
| struct sdw_slave *peripheral = cs35l56->sdw_peripheral; |
| |
| if (peripheral->unattach_request) { |
| /* Cannot access registers until bus is re-initialized. */ |
| dev_dbg(cs35l56->base.dev, "Wait for initialization_complete\n"); |
| if (!wait_for_completion_timeout(&peripheral->initialization_complete, |
| msecs_to_jiffies(5000))) { |
| dev_err(cs35l56->base.dev, "initialization_complete timed out\n"); |
| return -ETIMEDOUT; |
| } |
| |
| peripheral->unattach_request = 0; |
| |
| /* |
| * Don't call regcache_mark_dirty(), we can't be sure that the |
| * Manager really did issue a Bus Reset. |
| */ |
| } |
| |
| return 0; |
| } |
| |
| static int __maybe_unused cs35l56_sdw_runtime_suspend(struct device *dev) |
| { |
| struct cs35l56_private *cs35l56 = dev_get_drvdata(dev); |
| |
| if (!cs35l56->base.init_done) |
| return 0; |
| |
| return cs35l56_runtime_suspend_common(&cs35l56->base); |
| } |
| |
| static int __maybe_unused cs35l56_sdw_runtime_resume(struct device *dev) |
| { |
| struct cs35l56_private *cs35l56 = dev_get_drvdata(dev); |
| int ret; |
| |
| dev_dbg(dev, "Runtime resume\n"); |
| |
| if (!cs35l56->base.init_done) |
| return 0; |
| |
| ret = cs35l56_sdw_handle_unattach(cs35l56); |
| if (ret < 0) |
| return ret; |
| |
| ret = cs35l56_runtime_resume_common(&cs35l56->base, true); |
| if (ret) |
| return ret; |
| |
| /* Re-enable SoundWire interrupts */ |
| sdw_write_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_MASK_1, |
| CS35L56_SDW_INT_MASK_CODEC_IRQ); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused cs35l56_sdw_system_suspend(struct device *dev) |
| { |
| struct cs35l56_private *cs35l56 = dev_get_drvdata(dev); |
| |
| if (!cs35l56->base.init_done) |
| return 0; |
| |
| /* |
| * Disable SoundWire interrupts. |
| * Flush - don't cancel because that could leave an unbalanced pm_runtime_get. |
| */ |
| cs35l56->sdw_irq_no_unmask = true; |
| flush_work(&cs35l56->sdw_irq_work); |
| |
| /* Mask interrupts and flush in case sdw_irq_work was queued again */ |
| sdw_write_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_MASK_1, 0); |
| sdw_read_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_STAT_1); |
| sdw_write_no_pm(cs35l56->sdw_peripheral, CS35L56_SDW_GEN_INT_STAT_1, 0xFF); |
| flush_work(&cs35l56->sdw_irq_work); |
| |
| return cs35l56_system_suspend(dev); |
| } |
| |
| static int __maybe_unused cs35l56_sdw_system_resume(struct device *dev) |
| { |
| struct cs35l56_private *cs35l56 = dev_get_drvdata(dev); |
| |
| cs35l56->sdw_irq_no_unmask = false; |
| /* runtime_resume re-enables the interrupt */ |
| |
| return cs35l56_system_resume(dev); |
| } |
| |
| static int cs35l56_sdw_probe(struct sdw_slave *peripheral, const struct sdw_device_id *id) |
| { |
| struct device *dev = &peripheral->dev; |
| struct cs35l56_private *cs35l56; |
| int ret; |
| |
| cs35l56 = devm_kzalloc(dev, sizeof(*cs35l56), GFP_KERNEL); |
| if (!cs35l56) |
| return -ENOMEM; |
| |
| cs35l56->base.dev = dev; |
| cs35l56->sdw_peripheral = peripheral; |
| INIT_WORK(&cs35l56->sdw_irq_work, cs35l56_sdw_irq_work); |
| |
| dev_set_drvdata(dev, cs35l56); |
| |
| cs35l56->base.regmap = devm_regmap_init(dev, &cs35l56_regmap_bus_sdw, |
| peripheral, &cs35l56_regmap_sdw); |
| if (IS_ERR(cs35l56->base.regmap)) { |
| ret = PTR_ERR(cs35l56->base.regmap); |
| return dev_err_probe(dev, ret, "Failed to allocate register map\n"); |
| } |
| |
| /* Start in cache-only until device is enumerated */ |
| regcache_cache_only(cs35l56->base.regmap, true); |
| |
| ret = cs35l56_common_probe(cs35l56); |
| if (ret != 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int cs35l56_sdw_remove(struct sdw_slave *peripheral) |
| { |
| struct cs35l56_private *cs35l56 = dev_get_drvdata(&peripheral->dev); |
| |
| /* Disable SoundWire interrupts */ |
| cs35l56->sdw_irq_no_unmask = true; |
| cancel_work_sync(&cs35l56->sdw_irq_work); |
| sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_MASK_1, 0); |
| sdw_read_no_pm(peripheral, CS35L56_SDW_GEN_INT_STAT_1); |
| sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_STAT_1, 0xFF); |
| |
| cs35l56_remove(cs35l56); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops cs35l56_sdw_pm = { |
| SET_RUNTIME_PM_OPS(cs35l56_sdw_runtime_suspend, cs35l56_sdw_runtime_resume, NULL) |
| SYSTEM_SLEEP_PM_OPS(cs35l56_sdw_system_suspend, cs35l56_sdw_system_resume) |
| LATE_SYSTEM_SLEEP_PM_OPS(cs35l56_system_suspend_late, cs35l56_system_resume_early) |
| /* NOIRQ stage not needed, SoundWire doesn't use a hard IRQ */ |
| }; |
| |
| static const struct sdw_device_id cs35l56_sdw_id[] = { |
| SDW_SLAVE_ENTRY(0x01FA, 0x3556, 0), |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(sdw, cs35l56_sdw_id); |
| |
| static struct sdw_driver cs35l56_sdw_driver = { |
| .driver = { |
| .name = "cs35l56", |
| .pm = pm_ptr(&cs35l56_sdw_pm), |
| }, |
| .probe = cs35l56_sdw_probe, |
| .remove = cs35l56_sdw_remove, |
| .ops = &cs35l56_sdw_ops, |
| .id_table = cs35l56_sdw_id, |
| }; |
| |
| module_sdw_driver(cs35l56_sdw_driver); |
| |
| MODULE_DESCRIPTION("ASoC CS35L56 SoundWire driver"); |
| MODULE_IMPORT_NS(SND_SOC_CS35L56_CORE); |
| MODULE_IMPORT_NS(SND_SOC_CS35L56_SHARED); |
| MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>"); |
| MODULE_AUTHOR("Simon Trimmer <simont@opensource.cirrus.com>"); |
| MODULE_LICENSE("GPL"); |