| #!/bin/bash |
| # SPDX-License-Identifier: GPL-2.0 |
| # |
| # Tests sysctl options {arp,ndisc}_evict_nocarrier={0,1} |
| # |
| # Create a veth pair and set IPs/routes on both. Then ping to establish |
| # an entry in the ARP/ND table. Depending on the test set sysctl option to |
| # 1 or 0. Set remote veth down which will cause local veth to go into a no |
| # carrier state. Depending on the test check the ARP/ND table: |
| # |
| # {arp,ndisc}_evict_nocarrier=1 should contain no ARP/ND after no carrier |
| # {arp,ndisc}_evict_nocarrer=0 should still contain the single ARP/ND entry |
| # |
| |
| source lib.sh |
| |
| readonly V4_ADDR0=10.0.10.1 |
| readonly V4_ADDR1=10.0.10.2 |
| readonly V6_ADDR0=2001:db8:91::1 |
| readonly V6_ADDR1=2001:db8:91::2 |
| nsid=100 |
| ret=0 |
| |
| cleanup_v6() |
| { |
| cleanup_ns ${me} ${peer} |
| |
| sysctl -w net.ipv6.conf.veth1.ndisc_evict_nocarrier=1 >/dev/null 2>&1 |
| sysctl -w net.ipv6.conf.all.ndisc_evict_nocarrier=1 >/dev/null 2>&1 |
| } |
| |
| setup_v6() { |
| setup_ns me peer |
| |
| IP="ip -netns ${me}" |
| |
| $IP li add veth1 type veth peer name veth2 |
| $IP li set veth1 up |
| $IP -6 addr add $V6_ADDR0/64 dev veth1 nodad |
| $IP li set veth2 netns ${peer} up |
| ip -netns ${peer} -6 addr add $V6_ADDR1/64 dev veth2 nodad |
| |
| ip netns exec ${me} sysctl -w $1 >/dev/null 2>&1 |
| |
| # Establish an ND cache entry |
| ip netns exec ${me} ping -6 -c1 -Iveth1 $V6_ADDR1 >/dev/null 2>&1 |
| # Should have the veth1 entry in ND table |
| ip netns exec ${me} ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 |
| if [ $? -ne 0 ]; then |
| cleanup_v6 |
| echo "failed" |
| exit 1 |
| fi |
| |
| # Set veth2 down, which will put veth1 in NOCARRIER state |
| ip netns exec ${peer} ip link set veth2 down |
| } |
| |
| setup_v4() { |
| setup_ns PEER_NS |
| ip link add name veth0 type veth peer name veth1 |
| ip link set dev veth0 up |
| ip link set dev veth1 netns "${PEER_NS}" |
| ip netns exec "${PEER_NS}" ip link set dev veth1 up |
| ip addr add $V4_ADDR0/24 dev veth0 |
| ip netns exec "${PEER_NS}" ip addr add $V4_ADDR1/24 dev veth1 |
| ip netns exec ${PEER_NS} ip route add default via $V4_ADDR1 dev veth1 |
| ip route add default via $V4_ADDR0 dev veth0 |
| |
| sysctl -w "$1" >/dev/null 2>&1 |
| |
| # Establish an ARP cache entry |
| ping -c1 -I veth0 $V4_ADDR1 -q >/dev/null 2>&1 |
| # Should have the veth1 entry in ARP table |
| ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 |
| if [ $? -ne 0 ]; then |
| cleanup_v4 |
| echo "failed" |
| exit 1 |
| fi |
| |
| # Set veth1 down, which will put veth0 in NOCARRIER state |
| ip netns exec "${PEER_NS}" ip link set veth1 down |
| } |
| |
| cleanup_v4() { |
| ip neigh flush dev veth0 |
| ip link del veth0 |
| cleanup_ns $PEER_NS |
| |
| sysctl -w net.ipv4.conf.veth0.arp_evict_nocarrier=1 >/dev/null 2>&1 |
| sysctl -w net.ipv4.conf.all.arp_evict_nocarrier=1 >/dev/null 2>&1 |
| } |
| |
| # Run test when arp_evict_nocarrier = 1 (default). |
| run_arp_evict_nocarrier_enabled() { |
| echo "run arp_evict_nocarrier=1 test" |
| setup_v4 "net.ipv4.conf.veth0.arp_evict_nocarrier=1" |
| |
| # ARP table should be empty |
| ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 |
| |
| if [ $? -eq 0 ];then |
| echo "failed" |
| ret=1 |
| else |
| echo "ok" |
| fi |
| |
| cleanup_v4 |
| } |
| |
| # Run test when arp_evict_nocarrier = 0 |
| run_arp_evict_nocarrier_disabled() { |
| echo "run arp_evict_nocarrier=0 test" |
| setup_v4 "net.ipv4.conf.veth0.arp_evict_nocarrier=0" |
| |
| # ARP table should still contain the entry |
| ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 |
| |
| if [ $? -eq 0 ];then |
| echo "ok" |
| else |
| echo "failed" |
| ret=1 |
| fi |
| |
| cleanup_v4 |
| } |
| |
| run_arp_evict_nocarrier_disabled_all() { |
| echo "run all.arp_evict_nocarrier=0 test" |
| setup_v4 "net.ipv4.conf.all.arp_evict_nocarrier=0" |
| |
| # ARP table should still contain the entry |
| ip neigh get $V4_ADDR1 dev veth0 >/dev/null 2>&1 |
| |
| if [ $? -eq 0 ];then |
| echo "ok" |
| else |
| echo "failed" |
| fi |
| |
| cleanup_v4 |
| } |
| |
| run_ndisc_evict_nocarrier_enabled() { |
| echo "run ndisc_evict_nocarrier=1 test" |
| |
| setup_v6 "net.ipv6.conf.veth1.ndisc_evict_nocarrier=1" |
| |
| ip netns exec ${me} ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 |
| |
| if [ $? -eq 0 ];then |
| echo "failed" |
| ret=1 |
| else |
| echo "ok" |
| fi |
| |
| cleanup_v6 |
| } |
| |
| run_ndisc_evict_nocarrier_disabled() { |
| echo "run ndisc_evict_nocarrier=0 test" |
| |
| setup_v6 "net.ipv6.conf.veth1.ndisc_evict_nocarrier=0" |
| |
| ip netns exec ${me} ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 |
| |
| if [ $? -eq 0 ];then |
| echo "ok" |
| else |
| echo "failed" |
| ret=1 |
| fi |
| |
| cleanup_v6 |
| } |
| |
| run_ndisc_evict_nocarrier_disabled_all() { |
| echo "run all.ndisc_evict_nocarrier=0 test" |
| |
| setup_v6 "net.ipv6.conf.all.ndisc_evict_nocarrier=0" |
| |
| ip netns exec ${me} ip -6 neigh get $V6_ADDR1 dev veth1 >/dev/null 2>&1 |
| |
| if [ $? -eq 0 ];then |
| echo "ok" |
| else |
| echo "failed" |
| ret=1 |
| fi |
| |
| cleanup_v6 |
| } |
| |
| run_all_tests() { |
| run_arp_evict_nocarrier_enabled |
| run_arp_evict_nocarrier_disabled |
| run_arp_evict_nocarrier_disabled_all |
| run_ndisc_evict_nocarrier_enabled |
| run_ndisc_evict_nocarrier_disabled |
| run_ndisc_evict_nocarrier_disabled_all |
| } |
| |
| if [ "$(id -u)" -ne 0 ];then |
| echo "SKIP: Need root privileges" |
| exit $ksft_skip; |
| fi |
| |
| run_all_tests |
| exit $ret |