| /* |
| * Copyright (C) 2012 Red Hat |
| * |
| * based in parts on udlfb.c: |
| * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it> |
| * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com> |
| * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com> |
| |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License v2. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_plane_helper.h> |
| #include "udl_drv.h" |
| |
| /* |
| * All DisplayLink bulk operations start with 0xAF, followed by specific code |
| * All operations are written to buffers which then later get sent to device |
| */ |
| static char *udl_set_register(char *buf, u8 reg, u8 val) |
| { |
| *buf++ = 0xAF; |
| *buf++ = 0x20; |
| *buf++ = reg; |
| *buf++ = val; |
| return buf; |
| } |
| |
| static char *udl_vidreg_lock(char *buf) |
| { |
| return udl_set_register(buf, 0xFF, 0x00); |
| } |
| |
| static char *udl_vidreg_unlock(char *buf) |
| { |
| return udl_set_register(buf, 0xFF, 0xFF); |
| } |
| |
| /* |
| * On/Off for driving the DisplayLink framebuffer to the display |
| * 0x00 H and V sync on |
| * 0x01 H and V sync off (screen blank but powered) |
| * 0x07 DPMS powerdown (requires modeset to come back) |
| */ |
| static char *udl_set_blank(char *buf, int dpms_mode) |
| { |
| u8 reg; |
| switch (dpms_mode) { |
| case DRM_MODE_DPMS_OFF: |
| reg = 0x07; |
| break; |
| case DRM_MODE_DPMS_STANDBY: |
| reg = 0x05; |
| break; |
| case DRM_MODE_DPMS_SUSPEND: |
| reg = 0x01; |
| break; |
| case DRM_MODE_DPMS_ON: |
| reg = 0x00; |
| break; |
| } |
| |
| return udl_set_register(buf, 0x1f, reg); |
| } |
| |
| static char *udl_set_color_depth(char *buf, u8 selection) |
| { |
| return udl_set_register(buf, 0x00, selection); |
| } |
| |
| static char *udl_set_base16bpp(char *wrptr, u32 base) |
| { |
| /* the base pointer is 16 bits wide, 0x20 is hi byte. */ |
| wrptr = udl_set_register(wrptr, 0x20, base >> 16); |
| wrptr = udl_set_register(wrptr, 0x21, base >> 8); |
| return udl_set_register(wrptr, 0x22, base); |
| } |
| |
| /* |
| * DisplayLink HW has separate 16bpp and 8bpp framebuffers. |
| * In 24bpp modes, the low 323 RGB bits go in the 8bpp framebuffer |
| */ |
| static char *udl_set_base8bpp(char *wrptr, u32 base) |
| { |
| wrptr = udl_set_register(wrptr, 0x26, base >> 16); |
| wrptr = udl_set_register(wrptr, 0x27, base >> 8); |
| return udl_set_register(wrptr, 0x28, base); |
| } |
| |
| static char *udl_set_register_16(char *wrptr, u8 reg, u16 value) |
| { |
| wrptr = udl_set_register(wrptr, reg, value >> 8); |
| return udl_set_register(wrptr, reg+1, value); |
| } |
| |
| /* |
| * This is kind of weird because the controller takes some |
| * register values in a different byte order than other registers. |
| */ |
| static char *udl_set_register_16be(char *wrptr, u8 reg, u16 value) |
| { |
| wrptr = udl_set_register(wrptr, reg, value); |
| return udl_set_register(wrptr, reg+1, value >> 8); |
| } |
| |
| /* |
| * LFSR is linear feedback shift register. The reason we have this is |
| * because the display controller needs to minimize the clock depth of |
| * various counters used in the display path. So this code reverses the |
| * provided value into the lfsr16 value by counting backwards to get |
| * the value that needs to be set in the hardware comparator to get the |
| * same actual count. This makes sense once you read above a couple of |
| * times and think about it from a hardware perspective. |
| */ |
| static u16 udl_lfsr16(u16 actual_count) |
| { |
| u32 lv = 0xFFFF; /* This is the lfsr value that the hw starts with */ |
| |
| while (actual_count--) { |
| lv = ((lv << 1) | |
| (((lv >> 15) ^ (lv >> 4) ^ (lv >> 2) ^ (lv >> 1)) & 1)) |
| & 0xFFFF; |
| } |
| |
| return (u16) lv; |
| } |
| |
| /* |
| * This does LFSR conversion on the value that is to be written. |
| * See LFSR explanation above for more detail. |
| */ |
| static char *udl_set_register_lfsr16(char *wrptr, u8 reg, u16 value) |
| { |
| return udl_set_register_16(wrptr, reg, udl_lfsr16(value)); |
| } |
| |
| /* |
| * This takes a standard fbdev screeninfo struct and all of its monitor mode |
| * details and converts them into the DisplayLink equivalent register commands. |
| ERR(vreg(dev, 0x00, (color_depth == 16) ? 0 : 1)); |
| ERR(vreg_lfsr16(dev, 0x01, xDisplayStart)); |
| ERR(vreg_lfsr16(dev, 0x03, xDisplayEnd)); |
| ERR(vreg_lfsr16(dev, 0x05, yDisplayStart)); |
| ERR(vreg_lfsr16(dev, 0x07, yDisplayEnd)); |
| ERR(vreg_lfsr16(dev, 0x09, xEndCount)); |
| ERR(vreg_lfsr16(dev, 0x0B, hSyncStart)); |
| ERR(vreg_lfsr16(dev, 0x0D, hSyncEnd)); |
| ERR(vreg_big_endian(dev, 0x0F, hPixels)); |
| ERR(vreg_lfsr16(dev, 0x11, yEndCount)); |
| ERR(vreg_lfsr16(dev, 0x13, vSyncStart)); |
| ERR(vreg_lfsr16(dev, 0x15, vSyncEnd)); |
| ERR(vreg_big_endian(dev, 0x17, vPixels)); |
| ERR(vreg_little_endian(dev, 0x1B, pixelClock5KHz)); |
| |
| ERR(vreg(dev, 0x1F, 0)); |
| |
| ERR(vbuf(dev, WRITE_VIDREG_UNLOCK, DSIZEOF(WRITE_VIDREG_UNLOCK))); |
| */ |
| static char *udl_set_vid_cmds(char *wrptr, struct drm_display_mode *mode) |
| { |
| u16 xds, yds; |
| u16 xde, yde; |
| u16 yec; |
| |
| /* x display start */ |
| xds = mode->crtc_htotal - mode->crtc_hsync_start; |
| wrptr = udl_set_register_lfsr16(wrptr, 0x01, xds); |
| /* x display end */ |
| xde = xds + mode->crtc_hdisplay; |
| wrptr = udl_set_register_lfsr16(wrptr, 0x03, xde); |
| |
| /* y display start */ |
| yds = mode->crtc_vtotal - mode->crtc_vsync_start; |
| wrptr = udl_set_register_lfsr16(wrptr, 0x05, yds); |
| /* y display end */ |
| yde = yds + mode->crtc_vdisplay; |
| wrptr = udl_set_register_lfsr16(wrptr, 0x07, yde); |
| |
| /* x end count is active + blanking - 1 */ |
| wrptr = udl_set_register_lfsr16(wrptr, 0x09, |
| mode->crtc_htotal - 1); |
| |
| /* libdlo hardcodes hsync start to 1 */ |
| wrptr = udl_set_register_lfsr16(wrptr, 0x0B, 1); |
| |
| /* hsync end is width of sync pulse + 1 */ |
| wrptr = udl_set_register_lfsr16(wrptr, 0x0D, |
| mode->crtc_hsync_end - mode->crtc_hsync_start + 1); |
| |
| /* hpixels is active pixels */ |
| wrptr = udl_set_register_16(wrptr, 0x0F, mode->hdisplay); |
| |
| /* yendcount is vertical active + vertical blanking */ |
| yec = mode->crtc_vtotal; |
| wrptr = udl_set_register_lfsr16(wrptr, 0x11, yec); |
| |
| /* libdlo hardcodes vsync start to 0 */ |
| wrptr = udl_set_register_lfsr16(wrptr, 0x13, 0); |
| |
| /* vsync end is width of vsync pulse */ |
| wrptr = udl_set_register_lfsr16(wrptr, 0x15, mode->crtc_vsync_end - mode->crtc_vsync_start); |
| |
| /* vpixels is active pixels */ |
| wrptr = udl_set_register_16(wrptr, 0x17, mode->crtc_vdisplay); |
| |
| wrptr = udl_set_register_16be(wrptr, 0x1B, |
| mode->clock / 5); |
| |
| return wrptr; |
| } |
| |
| static char *udl_dummy_render(char *wrptr) |
| { |
| *wrptr++ = 0xAF; |
| *wrptr++ = 0x6A; /* copy */ |
| *wrptr++ = 0x00; /* from addr */ |
| *wrptr++ = 0x00; |
| *wrptr++ = 0x00; |
| *wrptr++ = 0x01; /* one pixel */ |
| *wrptr++ = 0x00; /* to address */ |
| *wrptr++ = 0x00; |
| *wrptr++ = 0x00; |
| return wrptr; |
| } |
| |
| static int udl_crtc_write_mode_to_hw(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct udl_device *udl = dev->dev_private; |
| struct urb *urb; |
| char *buf; |
| int retval; |
| |
| urb = udl_get_urb(dev); |
| if (!urb) |
| return -ENOMEM; |
| |
| buf = (char *)urb->transfer_buffer; |
| |
| memcpy(buf, udl->mode_buf, udl->mode_buf_len); |
| retval = udl_submit_urb(dev, urb, udl->mode_buf_len); |
| DRM_DEBUG("write mode info %d\n", udl->mode_buf_len); |
| return retval; |
| } |
| |
| |
| static void udl_crtc_dpms(struct drm_crtc *crtc, int mode) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct udl_device *udl = dev->dev_private; |
| int retval; |
| |
| if (mode == DRM_MODE_DPMS_OFF) { |
| char *buf; |
| struct urb *urb; |
| urb = udl_get_urb(dev); |
| if (!urb) |
| return; |
| |
| buf = (char *)urb->transfer_buffer; |
| buf = udl_vidreg_lock(buf); |
| buf = udl_set_blank(buf, mode); |
| buf = udl_vidreg_unlock(buf); |
| |
| buf = udl_dummy_render(buf); |
| retval = udl_submit_urb(dev, urb, buf - (char *) |
| urb->transfer_buffer); |
| } else { |
| if (udl->mode_buf_len == 0) { |
| DRM_ERROR("Trying to enable DPMS with no mode\n"); |
| return; |
| } |
| udl_crtc_write_mode_to_hw(crtc); |
| } |
| |
| } |
| |
| #if 0 |
| static int |
| udl_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, |
| int x, int y, enum mode_set_atomic state) |
| { |
| return 0; |
| } |
| |
| static int |
| udl_pipe_set_base(struct drm_crtc *crtc, int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| return 0; |
| } |
| #endif |
| |
| static int udl_crtc_mode_set(struct drm_crtc *crtc, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode, |
| int x, int y, |
| struct drm_framebuffer *old_fb) |
| |
| { |
| struct drm_device *dev = crtc->dev; |
| struct udl_framebuffer *ufb = to_udl_fb(crtc->primary->fb); |
| struct udl_device *udl = dev->dev_private; |
| char *buf; |
| char *wrptr; |
| int color_depth = 0; |
| |
| udl->crtc = crtc; |
| |
| buf = (char *)udl->mode_buf; |
| |
| /* for now we just clip 24 -> 16 - if we fix that fix this */ |
| /*if (crtc->fb->bits_per_pixel != 16) |
| color_depth = 1; */ |
| |
| /* This first section has to do with setting the base address on the |
| * controller * associated with the display. There are 2 base |
| * pointers, currently, we only * use the 16 bpp segment. |
| */ |
| wrptr = udl_vidreg_lock(buf); |
| wrptr = udl_set_color_depth(wrptr, color_depth); |
| /* set base for 16bpp segment to 0 */ |
| wrptr = udl_set_base16bpp(wrptr, 0); |
| /* set base for 8bpp segment to end of fb */ |
| wrptr = udl_set_base8bpp(wrptr, 2 * mode->vdisplay * mode->hdisplay); |
| |
| wrptr = udl_set_vid_cmds(wrptr, adjusted_mode); |
| wrptr = udl_set_blank(wrptr, DRM_MODE_DPMS_ON); |
| wrptr = udl_vidreg_unlock(wrptr); |
| |
| wrptr = udl_dummy_render(wrptr); |
| |
| if (old_fb) { |
| struct udl_framebuffer *uold_fb = to_udl_fb(old_fb); |
| uold_fb->active_16 = false; |
| } |
| ufb->active_16 = true; |
| udl->mode_buf_len = wrptr - buf; |
| |
| /* damage all of it */ |
| udl_handle_damage(ufb, 0, 0, ufb->base.width, ufb->base.height); |
| return 0; |
| } |
| |
| |
| static void udl_crtc_disable(struct drm_crtc *crtc) |
| { |
| udl_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); |
| } |
| |
| static void udl_crtc_destroy(struct drm_crtc *crtc) |
| { |
| drm_crtc_cleanup(crtc); |
| kfree(crtc); |
| } |
| |
| static int udl_crtc_page_flip(struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| struct drm_pending_vblank_event *event, |
| uint32_t page_flip_flags, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct udl_framebuffer *ufb = to_udl_fb(fb); |
| struct drm_device *dev = crtc->dev; |
| |
| struct drm_framebuffer *old_fb = crtc->primary->fb; |
| if (old_fb) { |
| struct udl_framebuffer *uold_fb = to_udl_fb(old_fb); |
| uold_fb->active_16 = false; |
| } |
| ufb->active_16 = true; |
| |
| udl_handle_damage(ufb, 0, 0, fb->width, fb->height); |
| |
| spin_lock_irq(&dev->event_lock); |
| if (event) |
| drm_crtc_send_vblank_event(crtc, event); |
| spin_unlock_irq(&dev->event_lock); |
| crtc->primary->fb = fb; |
| |
| return 0; |
| } |
| |
| static void udl_crtc_prepare(struct drm_crtc *crtc) |
| { |
| } |
| |
| static void udl_crtc_commit(struct drm_crtc *crtc) |
| { |
| udl_crtc_dpms(crtc, DRM_MODE_DPMS_ON); |
| } |
| |
| static const struct drm_crtc_helper_funcs udl_helper_funcs = { |
| .dpms = udl_crtc_dpms, |
| .mode_set = udl_crtc_mode_set, |
| .prepare = udl_crtc_prepare, |
| .commit = udl_crtc_commit, |
| .disable = udl_crtc_disable, |
| }; |
| |
| static const struct drm_crtc_funcs udl_crtc_funcs = { |
| .set_config = drm_crtc_helper_set_config, |
| .destroy = udl_crtc_destroy, |
| .page_flip = udl_crtc_page_flip, |
| }; |
| |
| static int udl_crtc_init(struct drm_device *dev) |
| { |
| struct drm_crtc *crtc; |
| |
| crtc = kzalloc(sizeof(struct drm_crtc) + sizeof(struct drm_connector *), GFP_KERNEL); |
| if (crtc == NULL) |
| return -ENOMEM; |
| |
| drm_crtc_init(dev, crtc, &udl_crtc_funcs); |
| drm_crtc_helper_add(crtc, &udl_helper_funcs); |
| |
| return 0; |
| } |
| |
| static const struct drm_mode_config_funcs udl_mode_funcs = { |
| .fb_create = udl_fb_user_fb_create, |
| .output_poll_changed = NULL, |
| }; |
| |
| int udl_modeset_init(struct drm_device *dev) |
| { |
| struct drm_encoder *encoder; |
| drm_mode_config_init(dev); |
| |
| dev->mode_config.min_width = 640; |
| dev->mode_config.min_height = 480; |
| |
| dev->mode_config.max_width = 2048; |
| dev->mode_config.max_height = 2048; |
| |
| dev->mode_config.prefer_shadow = 0; |
| dev->mode_config.preferred_depth = 24; |
| |
| dev->mode_config.funcs = &udl_mode_funcs; |
| |
| udl_crtc_init(dev); |
| |
| encoder = udl_encoder_init(dev); |
| |
| udl_connector_init(dev, encoder); |
| |
| return 0; |
| } |
| |
| void udl_modeset_restore(struct drm_device *dev) |
| { |
| struct udl_device *udl = dev->dev_private; |
| struct udl_framebuffer *ufb; |
| |
| if (!udl->crtc || !udl->crtc->primary->fb) |
| return; |
| udl_crtc_commit(udl->crtc); |
| ufb = to_udl_fb(udl->crtc->primary->fb); |
| udl_handle_damage(ufb, 0, 0, ufb->base.width, ufb->base.height); |
| } |
| |
| void udl_modeset_cleanup(struct drm_device *dev) |
| { |
| drm_mode_config_cleanup(dev); |
| } |