| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Xilinx 'Clocking Wizard' driver |
| * |
| * Copyright (C) 2013 - 2014 Xilinx |
| * |
| * Sören Brinkmann <soren.brinkmann@xilinx.com> |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/module.h> |
| #include <linux/err.h> |
| |
| #define WZRD_NUM_OUTPUTS 7 |
| #define WZRD_ACLK_MAX_FREQ 250000000UL |
| |
| #define WZRD_CLK_CFG_REG(n) (0x200 + 4 * (n)) |
| |
| #define WZRD_CLKOUT0_FRAC_EN BIT(18) |
| #define WZRD_CLKFBOUT_FRAC_EN BIT(26) |
| |
| #define WZRD_CLKFBOUT_MULT_SHIFT 8 |
| #define WZRD_CLKFBOUT_MULT_MASK (0xff << WZRD_CLKFBOUT_MULT_SHIFT) |
| #define WZRD_DIVCLK_DIVIDE_SHIFT 0 |
| #define WZRD_DIVCLK_DIVIDE_MASK (0xff << WZRD_DIVCLK_DIVIDE_SHIFT) |
| #define WZRD_CLKOUT_DIVIDE_SHIFT 0 |
| #define WZRD_CLKOUT_DIVIDE_MASK (0xff << WZRD_DIVCLK_DIVIDE_SHIFT) |
| |
| enum clk_wzrd_int_clks { |
| wzrd_clk_mul, |
| wzrd_clk_mul_div, |
| wzrd_clk_int_max |
| }; |
| |
| /** |
| * struct clk_wzrd: |
| * @clk_data: Clock data |
| * @nb: Notifier block |
| * @base: Memory base |
| * @clk_in1: Handle to input clock 'clk_in1' |
| * @axi_clk: Handle to input clock 's_axi_aclk' |
| * @clks_internal: Internal clocks |
| * @clkout: Output clocks |
| * @speed_grade: Speed grade of the device |
| * @suspended: Flag indicating power state of the device |
| */ |
| struct clk_wzrd { |
| struct clk_onecell_data clk_data; |
| struct notifier_block nb; |
| void __iomem *base; |
| struct clk *clk_in1; |
| struct clk *axi_clk; |
| struct clk *clks_internal[wzrd_clk_int_max]; |
| struct clk *clkout[WZRD_NUM_OUTPUTS]; |
| unsigned int speed_grade; |
| bool suspended; |
| }; |
| |
| #define to_clk_wzrd(_nb) container_of(_nb, struct clk_wzrd, nb) |
| |
| /* maximum frequencies for input/output clocks per speed grade */ |
| static const unsigned long clk_wzrd_max_freq[] = { |
| 800000000UL, |
| 933000000UL, |
| 1066000000UL |
| }; |
| |
| static int clk_wzrd_clk_notifier(struct notifier_block *nb, unsigned long event, |
| void *data) |
| { |
| unsigned long max; |
| struct clk_notifier_data *ndata = data; |
| struct clk_wzrd *clk_wzrd = to_clk_wzrd(nb); |
| |
| if (clk_wzrd->suspended) |
| return NOTIFY_OK; |
| |
| if (ndata->clk == clk_wzrd->clk_in1) |
| max = clk_wzrd_max_freq[clk_wzrd->speed_grade - 1]; |
| else if (ndata->clk == clk_wzrd->axi_clk) |
| max = WZRD_ACLK_MAX_FREQ; |
| else |
| return NOTIFY_DONE; /* should never happen */ |
| |
| switch (event) { |
| case PRE_RATE_CHANGE: |
| if (ndata->new_rate > max) |
| return NOTIFY_BAD; |
| return NOTIFY_OK; |
| case POST_RATE_CHANGE: |
| case ABORT_RATE_CHANGE: |
| default: |
| return NOTIFY_DONE; |
| } |
| } |
| |
| static int __maybe_unused clk_wzrd_suspend(struct device *dev) |
| { |
| struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev); |
| |
| clk_disable_unprepare(clk_wzrd->axi_clk); |
| clk_wzrd->suspended = true; |
| |
| return 0; |
| } |
| |
| static int __maybe_unused clk_wzrd_resume(struct device *dev) |
| { |
| int ret; |
| struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev); |
| |
| ret = clk_prepare_enable(clk_wzrd->axi_clk); |
| if (ret) { |
| dev_err(dev, "unable to enable s_axi_aclk\n"); |
| return ret; |
| } |
| |
| clk_wzrd->suspended = false; |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(clk_wzrd_dev_pm_ops, clk_wzrd_suspend, |
| clk_wzrd_resume); |
| |
| static int clk_wzrd_probe(struct platform_device *pdev) |
| { |
| int i, ret; |
| u32 reg; |
| unsigned long rate; |
| const char *clk_name; |
| struct clk_wzrd *clk_wzrd; |
| struct resource *mem; |
| struct device_node *np = pdev->dev.of_node; |
| |
| clk_wzrd = devm_kzalloc(&pdev->dev, sizeof(*clk_wzrd), GFP_KERNEL); |
| if (!clk_wzrd) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, clk_wzrd); |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| clk_wzrd->base = devm_ioremap_resource(&pdev->dev, mem); |
| if (IS_ERR(clk_wzrd->base)) |
| return PTR_ERR(clk_wzrd->base); |
| |
| ret = of_property_read_u32(np, "speed-grade", &clk_wzrd->speed_grade); |
| if (!ret) { |
| if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) { |
| dev_warn(&pdev->dev, "invalid speed grade '%d'\n", |
| clk_wzrd->speed_grade); |
| clk_wzrd->speed_grade = 0; |
| } |
| } |
| |
| clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1"); |
| if (IS_ERR(clk_wzrd->clk_in1)) { |
| if (clk_wzrd->clk_in1 != ERR_PTR(-EPROBE_DEFER)) |
| dev_err(&pdev->dev, "clk_in1 not found\n"); |
| return PTR_ERR(clk_wzrd->clk_in1); |
| } |
| |
| clk_wzrd->axi_clk = devm_clk_get(&pdev->dev, "s_axi_aclk"); |
| if (IS_ERR(clk_wzrd->axi_clk)) { |
| if (clk_wzrd->axi_clk != ERR_PTR(-EPROBE_DEFER)) |
| dev_err(&pdev->dev, "s_axi_aclk not found\n"); |
| return PTR_ERR(clk_wzrd->axi_clk); |
| } |
| ret = clk_prepare_enable(clk_wzrd->axi_clk); |
| if (ret) { |
| dev_err(&pdev->dev, "enabling s_axi_aclk failed\n"); |
| return ret; |
| } |
| rate = clk_get_rate(clk_wzrd->axi_clk); |
| if (rate > WZRD_ACLK_MAX_FREQ) { |
| dev_err(&pdev->dev, "s_axi_aclk frequency (%lu) too high\n", |
| rate); |
| ret = -EINVAL; |
| goto err_disable_clk; |
| } |
| |
| /* we don't support fractional div/mul yet */ |
| reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) & |
| WZRD_CLKFBOUT_FRAC_EN; |
| reg |= readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2)) & |
| WZRD_CLKOUT0_FRAC_EN; |
| if (reg) |
| dev_warn(&pdev->dev, "fractional div/mul not supported\n"); |
| |
| /* register multiplier */ |
| reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) & |
| WZRD_CLKFBOUT_MULT_MASK) >> WZRD_CLKFBOUT_MULT_SHIFT; |
| clk_name = kasprintf(GFP_KERNEL, "%s_mul", dev_name(&pdev->dev)); |
| if (!clk_name) { |
| ret = -ENOMEM; |
| goto err_disable_clk; |
| } |
| clk_wzrd->clks_internal[wzrd_clk_mul] = clk_register_fixed_factor( |
| &pdev->dev, clk_name, |
| __clk_get_name(clk_wzrd->clk_in1), |
| 0, reg, 1); |
| kfree(clk_name); |
| if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul])) { |
| dev_err(&pdev->dev, "unable to register fixed-factor clock\n"); |
| ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul]); |
| goto err_disable_clk; |
| } |
| |
| /* register div */ |
| reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) & |
| WZRD_DIVCLK_DIVIDE_MASK) >> WZRD_DIVCLK_DIVIDE_SHIFT; |
| clk_name = kasprintf(GFP_KERNEL, "%s_mul_div", dev_name(&pdev->dev)); |
| if (!clk_name) { |
| ret = -ENOMEM; |
| goto err_rm_int_clk; |
| } |
| |
| clk_wzrd->clks_internal[wzrd_clk_mul_div] = clk_register_fixed_factor( |
| &pdev->dev, clk_name, |
| __clk_get_name(clk_wzrd->clks_internal[wzrd_clk_mul]), |
| 0, 1, reg); |
| if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div])) { |
| dev_err(&pdev->dev, "unable to register divider clock\n"); |
| ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div]); |
| goto err_rm_int_clk; |
| } |
| |
| /* register div per output */ |
| for (i = WZRD_NUM_OUTPUTS - 1; i >= 0 ; i--) { |
| const char *clkout_name; |
| |
| if (of_property_read_string_index(np, "clock-output-names", i, |
| &clkout_name)) { |
| dev_err(&pdev->dev, |
| "clock output name not specified\n"); |
| ret = -EINVAL; |
| goto err_rm_int_clks; |
| } |
| reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2) + i * 12); |
| reg &= WZRD_CLKOUT_DIVIDE_MASK; |
| reg >>= WZRD_CLKOUT_DIVIDE_SHIFT; |
| clk_wzrd->clkout[i] = clk_register_fixed_factor(&pdev->dev, |
| clkout_name, clk_name, 0, 1, reg); |
| if (IS_ERR(clk_wzrd->clkout[i])) { |
| int j; |
| |
| for (j = i + 1; j < WZRD_NUM_OUTPUTS; j++) |
| clk_unregister(clk_wzrd->clkout[j]); |
| dev_err(&pdev->dev, |
| "unable to register divider clock\n"); |
| ret = PTR_ERR(clk_wzrd->clkout[i]); |
| goto err_rm_int_clks; |
| } |
| } |
| |
| kfree(clk_name); |
| |
| clk_wzrd->clk_data.clks = clk_wzrd->clkout; |
| clk_wzrd->clk_data.clk_num = ARRAY_SIZE(clk_wzrd->clkout); |
| of_clk_add_provider(np, of_clk_src_onecell_get, &clk_wzrd->clk_data); |
| |
| if (clk_wzrd->speed_grade) { |
| clk_wzrd->nb.notifier_call = clk_wzrd_clk_notifier; |
| |
| ret = clk_notifier_register(clk_wzrd->clk_in1, |
| &clk_wzrd->nb); |
| if (ret) |
| dev_warn(&pdev->dev, |
| "unable to register clock notifier\n"); |
| |
| ret = clk_notifier_register(clk_wzrd->axi_clk, &clk_wzrd->nb); |
| if (ret) |
| dev_warn(&pdev->dev, |
| "unable to register clock notifier\n"); |
| } |
| |
| return 0; |
| |
| err_rm_int_clks: |
| clk_unregister(clk_wzrd->clks_internal[1]); |
| err_rm_int_clk: |
| kfree(clk_name); |
| clk_unregister(clk_wzrd->clks_internal[0]); |
| err_disable_clk: |
| clk_disable_unprepare(clk_wzrd->axi_clk); |
| |
| return ret; |
| } |
| |
| static int clk_wzrd_remove(struct platform_device *pdev) |
| { |
| int i; |
| struct clk_wzrd *clk_wzrd = platform_get_drvdata(pdev); |
| |
| of_clk_del_provider(pdev->dev.of_node); |
| |
| for (i = 0; i < WZRD_NUM_OUTPUTS; i++) |
| clk_unregister(clk_wzrd->clkout[i]); |
| for (i = 0; i < wzrd_clk_int_max; i++) |
| clk_unregister(clk_wzrd->clks_internal[i]); |
| |
| if (clk_wzrd->speed_grade) { |
| clk_notifier_unregister(clk_wzrd->axi_clk, &clk_wzrd->nb); |
| clk_notifier_unregister(clk_wzrd->clk_in1, &clk_wzrd->nb); |
| } |
| |
| clk_disable_unprepare(clk_wzrd->axi_clk); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id clk_wzrd_ids[] = { |
| { .compatible = "xlnx,clocking-wizard" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, clk_wzrd_ids); |
| |
| static struct platform_driver clk_wzrd_driver = { |
| .driver = { |
| .name = "clk-wizard", |
| .of_match_table = clk_wzrd_ids, |
| .pm = &clk_wzrd_dev_pm_ops, |
| }, |
| .probe = clk_wzrd_probe, |
| .remove = clk_wzrd_remove, |
| }; |
| module_platform_driver(clk_wzrd_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com"); |
| MODULE_DESCRIPTION("Driver for the Xilinx Clocking Wizard IP core"); |