| /* |
| * spi-mt7621.c -- MediaTek MT7621 SPI controller driver |
| * |
| * Copyright (C) 2011 Sergiy <piratfm@gmail.com> |
| * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org> |
| * Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name> |
| * |
| * Some parts are based on spi-orion.c: |
| * Author: Shadi Ammouri <shadi@marvell.com> |
| * Copyright (C) 2007-2008 Marvell Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/reset.h> |
| #include <linux/spi/spi.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/swab.h> |
| |
| #include <ralink_regs.h> |
| |
| #define SPI_BPW_MASK(bits) BIT((bits) - 1) |
| |
| #define DRIVER_NAME "spi-mt7621" |
| /* in usec */ |
| #define RALINK_SPI_WAIT_MAX_LOOP 2000 |
| |
| /* SPISTAT register bit field */ |
| #define SPISTAT_BUSY BIT(0) |
| |
| #define MT7621_SPI_TRANS 0x00 |
| #define SPITRANS_BUSY BIT(16) |
| |
| #define MT7621_SPI_OPCODE 0x04 |
| #define MT7621_SPI_DATA0 0x08 |
| #define MT7621_SPI_DATA4 0x18 |
| #define SPI_CTL_TX_RX_CNT_MASK 0xff |
| #define SPI_CTL_START BIT(8) |
| |
| #define MT7621_SPI_POLAR 0x38 |
| #define MT7621_SPI_MASTER 0x28 |
| #define MT7621_SPI_MOREBUF 0x2c |
| #define MT7621_SPI_SPACE 0x3c |
| |
| #define MT7621_CPHA BIT(5) |
| #define MT7621_CPOL BIT(4) |
| #define MT7621_LSB_FIRST BIT(3) |
| |
| #define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | \ |
| SPI_LSB_FIRST | SPI_CS_HIGH) |
| |
| struct mt7621_spi; |
| |
| struct mt7621_spi { |
| struct spi_master *master; |
| void __iomem *base; |
| unsigned int sys_freq; |
| unsigned int speed; |
| struct clk *clk; |
| int pending_write; |
| |
| struct mt7621_spi_ops *ops; |
| }; |
| |
| static inline struct mt7621_spi *spidev_to_mt7621_spi(struct spi_device *spi) |
| { |
| return spi_master_get_devdata(spi->master); |
| } |
| |
| static inline u32 mt7621_spi_read(struct mt7621_spi *rs, u32 reg) |
| { |
| return ioread32(rs->base + reg); |
| } |
| |
| static inline void mt7621_spi_write(struct mt7621_spi *rs, u32 reg, u32 val) |
| { |
| iowrite32(val, rs->base + reg); |
| } |
| |
| static void mt7621_spi_reset(struct mt7621_spi *rs, int duplex) |
| { |
| u32 master = mt7621_spi_read(rs, MT7621_SPI_MASTER); |
| |
| master |= 7 << 29; |
| master |= 1 << 2; |
| if (duplex) |
| master |= 1 << 10; |
| else |
| master &= ~(1 << 10); |
| |
| mt7621_spi_write(rs, MT7621_SPI_MASTER, master); |
| rs->pending_write = 0; |
| } |
| |
| static void mt7621_spi_set_cs(struct spi_device *spi, int enable) |
| { |
| struct mt7621_spi *rs = spidev_to_mt7621_spi(spi); |
| int cs = spi->chip_select; |
| u32 polar = 0; |
| |
| mt7621_spi_reset(rs, cs); |
| if (enable) |
| polar = BIT(cs); |
| mt7621_spi_write(rs, MT7621_SPI_POLAR, polar); |
| } |
| |
| static int mt7621_spi_prepare(struct spi_device *spi, unsigned int speed) |
| { |
| struct mt7621_spi *rs = spidev_to_mt7621_spi(spi); |
| u32 rate; |
| u32 reg; |
| |
| dev_dbg(&spi->dev, "speed:%u\n", speed); |
| |
| rate = DIV_ROUND_UP(rs->sys_freq, speed); |
| dev_dbg(&spi->dev, "rate-1:%u\n", rate); |
| |
| if (rate > 4097) |
| return -EINVAL; |
| |
| if (rate < 2) |
| rate = 2; |
| |
| reg = mt7621_spi_read(rs, MT7621_SPI_MASTER); |
| reg &= ~(0xfff << 16); |
| reg |= (rate - 2) << 16; |
| rs->speed = speed; |
| |
| reg &= ~MT7621_LSB_FIRST; |
| if (spi->mode & SPI_LSB_FIRST) |
| reg |= MT7621_LSB_FIRST; |
| |
| reg &= ~(MT7621_CPHA | MT7621_CPOL); |
| switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { |
| case SPI_MODE_0: |
| break; |
| case SPI_MODE_1: |
| reg |= MT7621_CPHA; |
| break; |
| case SPI_MODE_2: |
| reg |= MT7621_CPOL; |
| break; |
| case SPI_MODE_3: |
| reg |= MT7621_CPOL | MT7621_CPHA; |
| break; |
| } |
| mt7621_spi_write(rs, MT7621_SPI_MASTER, reg); |
| |
| return 0; |
| } |
| |
| static inline int mt7621_spi_wait_till_ready(struct mt7621_spi *rs) |
| { |
| int i; |
| |
| for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) { |
| u32 status; |
| |
| status = mt7621_spi_read(rs, MT7621_SPI_TRANS); |
| if ((status & SPITRANS_BUSY) == 0) |
| return 0; |
| cpu_relax(); |
| udelay(1); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static void mt7621_spi_read_half_duplex(struct mt7621_spi *rs, |
| int rx_len, u8 *buf) |
| { |
| /* Combine with any pending write, and perform one or |
| * more half-duplex transactions reading 'len' bytes. |
| * Data to be written is already in MT7621_SPI_DATA* |
| */ |
| int tx_len = rs->pending_write; |
| |
| rs->pending_write = 0; |
| |
| while (rx_len || tx_len) { |
| int i; |
| u32 val = (min(tx_len, 4) * 8) << 24; |
| int rx = min(rx_len, 32); |
| |
| if (tx_len > 4) |
| val |= (tx_len - 4) * 8; |
| val |= (rx * 8) << 12; |
| mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val); |
| |
| tx_len = 0; |
| |
| val = mt7621_spi_read(rs, MT7621_SPI_TRANS); |
| val |= SPI_CTL_START; |
| mt7621_spi_write(rs, MT7621_SPI_TRANS, val); |
| |
| mt7621_spi_wait_till_ready(rs); |
| |
| for (i = 0; i < rx; i++) { |
| if ((i % 4) == 0) |
| val = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i); |
| *buf++ = val & 0xff; |
| val >>= 8; |
| } |
| rx_len -= i; |
| } |
| } |
| |
| static inline void mt7621_spi_flush(struct mt7621_spi *rs) |
| { |
| mt7621_spi_read_half_duplex(rs, 0, NULL); |
| } |
| |
| static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs, |
| int tx_len, const u8 *buf) |
| { |
| int val = 0; |
| int len = rs->pending_write; |
| |
| if (len & 3) { |
| val = mt7621_spi_read(rs, MT7621_SPI_OPCODE + (len & ~3)); |
| if (len < 4) { |
| val <<= (4 - len) * 8; |
| val = swab32(val); |
| } |
| } |
| |
| while (tx_len > 0) { |
| if (len >= 36) { |
| rs->pending_write = len; |
| mt7621_spi_flush(rs); |
| len = 0; |
| } |
| |
| val |= *buf++ << (8 * (len & 3)); |
| len++; |
| if ((len & 3) == 0) { |
| if (len == 4) |
| /* The byte-order of the opcode is weird! */ |
| val = swab32(val); |
| mt7621_spi_write(rs, MT7621_SPI_OPCODE + len - 4, val); |
| val = 0; |
| } |
| tx_len -= 1; |
| } |
| if (len & 3) { |
| if (len < 4) { |
| val = swab32(val); |
| val >>= (4 - len) * 8; |
| } |
| mt7621_spi_write(rs, MT7621_SPI_OPCODE + (len & ~3), val); |
| } |
| rs->pending_write = len; |
| } |
| |
| static int mt7621_spi_transfer_half_duplex(struct spi_master *master, |
| struct spi_message *m) |
| { |
| struct mt7621_spi *rs = spi_master_get_devdata(master); |
| struct spi_device *spi = m->spi; |
| unsigned int speed = spi->max_speed_hz; |
| struct spi_transfer *t = NULL; |
| int status = 0; |
| |
| mt7621_spi_wait_till_ready(rs); |
| |
| list_for_each_entry(t, &m->transfers, transfer_list) |
| if (t->speed_hz < speed) |
| speed = t->speed_hz; |
| |
| if (mt7621_spi_prepare(spi, speed)) { |
| status = -EIO; |
| goto msg_done; |
| } |
| |
| mt7621_spi_set_cs(spi, 1); |
| m->actual_length = 0; |
| list_for_each_entry(t, &m->transfers, transfer_list) { |
| if (t->rx_buf) |
| mt7621_spi_read_half_duplex(rs, t->len, t->rx_buf); |
| else if (t->tx_buf) |
| mt7621_spi_write_half_duplex(rs, t->len, t->tx_buf); |
| m->actual_length += t->len; |
| } |
| mt7621_spi_flush(rs); |
| |
| mt7621_spi_set_cs(spi, 0); |
| msg_done: |
| m->status = status; |
| spi_finalize_current_message(master); |
| |
| return 0; |
| } |
| |
| static int mt7621_spi_transfer_full_duplex(struct spi_master *master, |
| struct spi_message *m) |
| { |
| struct mt7621_spi *rs = spi_master_get_devdata(master); |
| struct spi_device *spi = m->spi; |
| unsigned int speed = spi->max_speed_hz; |
| struct spi_transfer *t = NULL; |
| int status = 0; |
| int i, len = 0; |
| int rx_len = 0; |
| u32 data[9] = { 0 }; |
| u32 val = 0; |
| |
| mt7621_spi_wait_till_ready(rs); |
| |
| list_for_each_entry(t, &m->transfers, transfer_list) { |
| const u8 *buf = t->tx_buf; |
| |
| if (t->rx_buf) |
| rx_len += t->len; |
| |
| if (!buf) |
| continue; |
| |
| if (WARN_ON(len + t->len > 16)) { |
| status = -EIO; |
| goto msg_done; |
| } |
| |
| for (i = 0; i < t->len; i++, len++) |
| data[len / 4] |= buf[i] << (8 * (len & 3)); |
| if (speed > t->speed_hz) |
| speed = t->speed_hz; |
| } |
| |
| if (WARN_ON(rx_len > 16)) { |
| status = -EIO; |
| goto msg_done; |
| } |
| |
| if (mt7621_spi_prepare(spi, speed)) { |
| status = -EIO; |
| goto msg_done; |
| } |
| |
| for (i = 0; i < len; i += 4) |
| mt7621_spi_write(rs, MT7621_SPI_DATA0 + i, data[i / 4]); |
| |
| val |= len * 8; |
| val |= (rx_len * 8) << 12; |
| mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val); |
| |
| mt7621_spi_set_cs(spi, 1); |
| |
| val = mt7621_spi_read(rs, MT7621_SPI_TRANS); |
| val |= SPI_CTL_START; |
| mt7621_spi_write(rs, MT7621_SPI_TRANS, val); |
| |
| mt7621_spi_wait_till_ready(rs); |
| |
| mt7621_spi_set_cs(spi, 0); |
| |
| for (i = 0; i < rx_len; i += 4) |
| data[i / 4] = mt7621_spi_read(rs, MT7621_SPI_DATA4 + i); |
| |
| m->actual_length = rx_len; |
| |
| len = 0; |
| list_for_each_entry(t, &m->transfers, transfer_list) { |
| u8 *buf = t->rx_buf; |
| |
| if (!buf) |
| continue; |
| |
| for (i = 0; i < t->len; i++, len++) |
| buf[i] = data[len / 4] >> (8 * (len & 3)); |
| } |
| |
| msg_done: |
| m->status = status; |
| spi_finalize_current_message(master); |
| |
| return 0; |
| } |
| |
| static int mt7621_spi_transfer_one_message(struct spi_master *master, |
| struct spi_message *m) |
| { |
| struct spi_device *spi = m->spi; |
| int cs = spi->chip_select; |
| |
| if (cs) |
| return mt7621_spi_transfer_full_duplex(master, m); |
| return mt7621_spi_transfer_half_duplex(master, m); |
| } |
| |
| static int mt7621_spi_setup(struct spi_device *spi) |
| { |
| struct mt7621_spi *rs = spidev_to_mt7621_spi(spi); |
| |
| if ((spi->max_speed_hz == 0) || |
| (spi->max_speed_hz > (rs->sys_freq / 2))) |
| spi->max_speed_hz = (rs->sys_freq / 2); |
| |
| if (spi->max_speed_hz < (rs->sys_freq / 4097)) { |
| dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n", |
| spi->max_speed_hz); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mt7621_spi_match[] = { |
| { .compatible = "ralink,mt7621-spi" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mt7621_spi_match); |
| |
| static int mt7621_spi_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *match; |
| struct spi_master *master; |
| struct mt7621_spi *rs; |
| void __iomem *base; |
| struct resource *r; |
| int status = 0; |
| struct clk *clk; |
| struct mt7621_spi_ops *ops; |
| |
| match = of_match_device(mt7621_spi_match, &pdev->dev); |
| if (!match) |
| return -EINVAL; |
| ops = (struct mt7621_spi_ops *)match->data; |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(&pdev->dev, r); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(clk)) { |
| dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n", |
| status); |
| return PTR_ERR(clk); |
| } |
| |
| status = clk_prepare_enable(clk); |
| if (status) |
| return status; |
| |
| master = spi_alloc_master(&pdev->dev, sizeof(*rs)); |
| if (master == NULL) { |
| dev_info(&pdev->dev, "master allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| master->mode_bits = RT2880_SPI_MODE_BITS; |
| |
| master->setup = mt7621_spi_setup; |
| master->transfer_one_message = mt7621_spi_transfer_one_message; |
| master->bits_per_word_mask = SPI_BPW_MASK(8); |
| master->dev.of_node = pdev->dev.of_node; |
| master->num_chipselect = 2; |
| |
| dev_set_drvdata(&pdev->dev, master); |
| |
| rs = spi_master_get_devdata(master); |
| rs->base = base; |
| rs->clk = clk; |
| rs->master = master; |
| rs->sys_freq = clk_get_rate(rs->clk); |
| rs->ops = ops; |
| rs->pending_write = 0; |
| dev_info(&pdev->dev, "sys_freq: %u\n", rs->sys_freq); |
| |
| device_reset(&pdev->dev); |
| |
| mt7621_spi_reset(rs, 0); |
| |
| return spi_register_master(master); |
| } |
| |
| static int mt7621_spi_remove(struct platform_device *pdev) |
| { |
| struct spi_master *master; |
| struct mt7621_spi *rs; |
| |
| master = dev_get_drvdata(&pdev->dev); |
| rs = spi_master_get_devdata(master); |
| |
| clk_disable(rs->clk); |
| spi_unregister_master(master); |
| |
| return 0; |
| } |
| |
| MODULE_ALIAS("platform:" DRIVER_NAME); |
| |
| static struct platform_driver mt7621_spi_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = mt7621_spi_match, |
| }, |
| .probe = mt7621_spi_probe, |
| .remove = mt7621_spi_remove, |
| }; |
| |
| module_platform_driver(mt7621_spi_driver); |
| |
| MODULE_DESCRIPTION("MT7621 SPI driver"); |
| MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>"); |
| MODULE_LICENSE("GPL"); |