| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * Copyright IBM Corp. 1999, 2010 |
| * |
| * Author(s): Hartmut Penner <hp@de.ibm.com> |
| * Martin Schwidefsky <schwidefsky@de.ibm.com> |
| * Rob van der Heij <rvdhei@iae.nl> |
| * Heiko Carstens <heiko.carstens@de.ibm.com> |
| * |
| * There are 5 different IPL methods |
| * 1) load the image directly into ram at address 0 and do an PSW restart |
| * 2) linload will load the image from address 0x10000 to memory 0x10000 |
| * and start the code thru LPSW 0x0008000080010000 (VM only, deprecated) |
| * 3) generate the tape ipl header, store the generated image on a tape |
| * and ipl from it |
| * In case of SL tape you need to IPL 5 times to get past VOL1 etc |
| * 4) generate the vm reader ipl header, move the generated image to the |
| * VM reader (use option NOH!) and do a ipl from reader (VM only) |
| * 5) direct call of start by the SALIPL loader |
| * We use the cpuid to distinguish between VM and native ipl |
| * params for kernel are pushed to 0x10400 (see setup.h) |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/linkage.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/thread_info.h> |
| #include <asm/page.h> |
| #include <asm/ptrace.h> |
| |
| #define ARCH_OFFSET 4 |
| |
| __HEAD |
| |
| #define IPL_BS 0x730 |
| .org 0 |
| .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded |
| .long 0x02000018,0x60000050 # by ipl to addresses 0-23. |
| .long 0x02000068,0x60000050 # (a PSW and two CCWs). |
| .fill 80-24,1,0x40 # bytes 24-79 are discarded !! |
| .long 0x020000f0,0x60000050 # The next 160 byte are loaded |
| .long 0x02000140,0x60000050 # to addresses 0x18-0xb7 |
| .long 0x02000190,0x60000050 # They form the continuation |
| .long 0x020001e0,0x60000050 # of the CCW program started |
| .long 0x02000230,0x60000050 # by ipl and load the range |
| .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image |
| .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730 |
| .long 0x02000320,0x60000050 # in memory. At the end of |
| .long 0x02000370,0x60000050 # the channel program the PSW |
| .long 0x020003c0,0x60000050 # at location 0 is loaded. |
| .long 0x02000410,0x60000050 # Initial processing starts |
| .long 0x02000460,0x60000050 # at 0x200 = iplstart. |
| .long 0x020004b0,0x60000050 |
| .long 0x02000500,0x60000050 |
| .long 0x02000550,0x60000050 |
| .long 0x020005a0,0x60000050 |
| .long 0x020005f0,0x60000050 |
| .long 0x02000640,0x60000050 |
| .long 0x02000690,0x60000050 |
| .long 0x020006e0,0x20000050 |
| |
| .org 0x1a0 |
| .quad 0,iplstart |
| |
| .org 0x200 |
| |
| # |
| # subroutine to wait for end I/O |
| # |
| .Lirqwait: |
| mvc __LC_IO_NEW_PSW(16),.Lnewpsw # set up IO interrupt psw |
| lpsw .Lwaitpsw |
| .Lioint: |
| br %r14 |
| .align 8 |
| .Lnewpsw: |
| .quad 0x0000000080000000,.Lioint |
| .Lwaitpsw: |
| .long 0x020a0000,0x80000000+.Lioint |
| |
| # |
| # subroutine for loading cards from the reader |
| # |
| .Lloader: |
| la %r4,0(%r14) |
| la %r3,.Lorb # r2 = address of orb into r2 |
| la %r5,.Lirb # r4 = address of irb |
| la %r6,.Lccws |
| la %r7,20 |
| .Linit: |
| st %r2,4(%r6) # initialize CCW data addresses |
| la %r2,0x50(%r2) |
| la %r6,8(%r6) |
| bct 7,.Linit |
| |
| lctl %c6,%c6,.Lcr6 # set IO subclass mask |
| slr %r2,%r2 |
| .Lldlp: |
| ssch 0(%r3) # load chunk of 1600 bytes |
| bnz .Llderr |
| .Lwait4irq: |
| bas %r14,.Lirqwait |
| c %r1,__LC_SUBCHANNEL_ID # compare subchannel number |
| bne .Lwait4irq |
| tsch 0(%r5) |
| |
| slr %r0,%r0 |
| ic %r0,8(%r5) # get device status |
| chi %r0,8 # channel end ? |
| be .Lcont |
| chi %r0,12 # channel end + device end ? |
| be .Lcont |
| |
| l %r0,4(%r5) |
| s %r0,8(%r3) # r0/8 = number of ccws executed |
| mhi %r0,10 # *10 = number of bytes in ccws |
| lh %r3,10(%r5) # get residual count |
| sr %r0,%r3 # #ccws*80-residual=#bytes read |
| ar %r2,%r0 |
| |
| br %r4 # r2 contains the total size |
| |
| .Lcont: |
| ahi %r2,0x640 # add 0x640 to total size |
| la %r6,.Lccws |
| la %r7,20 |
| .Lincr: |
| l %r0,4(%r6) # update CCW data addresses |
| ahi %r0,0x640 |
| st %r0,4(%r6) |
| ahi %r6,8 |
| bct 7,.Lincr |
| |
| b .Lldlp |
| .Llderr: |
| lpsw .Lcrash |
| |
| .align 8 |
| .Lorb: .long 0x00000000,0x0080ff00,.Lccws |
| .Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 |
| .Lcr6: .long 0xff000000 |
| .Lloadp:.long 0,0 |
| .align 8 |
| .Lcrash:.long 0x000a0000,0x00000000 |
| |
| .align 8 |
| .Lccws: .rept 19 |
| .long 0x02600050,0x00000000 |
| .endr |
| .long 0x02200050,0x00000000 |
| |
| iplstart: |
| mvi __LC_AR_MODE_ID,1 # set esame flag |
| slr %r0,%r0 # set cpuid to zero |
| lhi %r1,2 # mode 2 = esame (dump) |
| sigp %r1,%r0,0x12 # switch to esame mode |
| bras %r13,0f |
| .fill 16,4,0x0 |
| 0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs |
| sam31 # switch to 31 bit addressing mode |
| lh %r1,__LC_SUBCHANNEL_ID # test if subchannel number |
| bct %r1,.Lnoload # is valid |
| l %r1,__LC_SUBCHANNEL_ID # load ipl subchannel number |
| la %r2,IPL_BS # load start address |
| bas %r14,.Lloader # load rest of ipl image |
| l %r12,.Lparm # pointer to parameter area |
| st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number |
| |
| # |
| # load parameter file from ipl device |
| # |
| .Lagain1: |
| l %r2,.Linitrd # ramdisk loc. is temp |
| bas %r14,.Lloader # load parameter file |
| ltr %r2,%r2 # got anything ? |
| bz .Lnopf |
| chi %r2,895 |
| bnh .Lnotrunc |
| la %r2,895 |
| .Lnotrunc: |
| l %r4,.Linitrd |
| clc 0(3,%r4),.L_hdr # if it is HDRx |
| bz .Lagain1 # skip dataset header |
| clc 0(3,%r4),.L_eof # if it is EOFx |
| bz .Lagain1 # skip dateset trailer |
| la %r5,0(%r4,%r2) |
| lr %r3,%r2 |
| la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line |
| mvc 0(256,%r3),0(%r4) |
| mvc 256(256,%r3),256(%r4) |
| mvc 512(256,%r3),512(%r4) |
| mvc 768(122,%r3),768(%r4) |
| slr %r0,%r0 |
| b .Lcntlp |
| .Ldelspc: |
| ic %r0,0(%r2,%r3) |
| chi %r0,0x20 # is it a space ? |
| be .Lcntlp |
| ahi %r2,1 |
| b .Leolp |
| .Lcntlp: |
| brct %r2,.Ldelspc |
| .Leolp: |
| slr %r0,%r0 |
| stc %r0,0(%r2,%r3) # terminate buffer |
| .Lnopf: |
| |
| # |
| # load ramdisk from ipl device |
| # |
| .Lagain2: |
| l %r2,.Linitrd # addr of ramdisk |
| st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) |
| bas %r14,.Lloader # load ramdisk |
| st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd |
| ltr %r2,%r2 |
| bnz .Lrdcont |
| st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found |
| .Lrdcont: |
| l %r2,.Linitrd |
| |
| clc 0(3,%r2),.L_hdr # skip HDRx and EOFx |
| bz .Lagain2 |
| clc 0(3,%r2),.L_eof |
| bz .Lagain2 |
| |
| # |
| # reset files in VM reader |
| # |
| stidp .Lcpuid # store cpuid |
| tm .Lcpuid,0xff # running VM ? |
| bno .Lnoreset |
| la %r2,.Lreset |
| lhi %r3,26 |
| diag %r2,%r3,8 |
| la %r5,.Lirb |
| stsch 0(%r5) # check if irq is pending |
| tm 30(%r5),0x0f # by verifying if any of the |
| bnz .Lwaitforirq # activity or status control |
| tm 31(%r5),0xff # bits is set in the schib |
| bz .Lnoreset |
| .Lwaitforirq: |
| bas %r14,.Lirqwait # wait for IO interrupt |
| c %r1,__LC_SUBCHANNEL_ID # compare subchannel number |
| bne .Lwaitforirq |
| la %r5,.Lirb |
| tsch 0(%r5) |
| .Lnoreset: |
| b .Lnoload |
| |
| # |
| # everything loaded, go for it |
| # |
| .Lnoload: |
| l %r1,.Lstartup |
| br %r1 |
| |
| .Linitrd:.long _end # default address of initrd |
| .Lparm: .long PARMAREA |
| .Lstartup: .long startup |
| .Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 |
| .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 |
| .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" |
| .L_eof: .long 0xc5d6c600 /* C'EOF' */ |
| .L_hdr: .long 0xc8c4d900 /* C'HDR' */ |
| .align 8 |
| .Lcpuid:.fill 8,1,0 |
| |
| # |
| # startup-code at 0x10000, running in absolute addressing mode |
| # this is called either by the ipl loader or directly by PSW restart |
| # or linload or SALIPL |
| # |
| .org 0x10000 |
| ENTRY(startup) |
| j .Lep_startup_normal |
| .org EP_OFFSET |
| # |
| # This is a list of s390 kernel entry points. At address 0x1000f the number of |
| # valid entry points is stored. |
| # |
| # IMPORTANT: Do not change this table, it is s390 kernel ABI! |
| # |
| .ascii EP_STRING |
| .byte 0x00,0x01 |
| # |
| # kdump startup-code at 0x10010, running in 64 bit absolute addressing mode |
| # |
| .org 0x10010 |
| ENTRY(startup_kdump) |
| j .Lep_startup_kdump |
| .Lep_startup_normal: |
| mvi __LC_AR_MODE_ID,1 # set esame flag |
| slr %r0,%r0 # set cpuid to zero |
| lhi %r1,2 # mode 2 = esame (dump) |
| sigp %r1,%r0,0x12 # switch to esame mode |
| bras %r13,0f |
| .fill 16,4,0x0 |
| 0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs |
| sam64 # switch to 64 bit addressing mode |
| basr %r13,0 # get base |
| .LPG0: |
| xc 0x200(256),0x200 # partially clear lowcore |
| xc 0x300(256),0x300 |
| xc 0xe00(256),0xe00 |
| xc 0xf00(256),0xf00 |
| lctlg %c0,%c15,.Lctl-.LPG0(%r13) # load control registers |
| stcke __LC_BOOT_CLOCK |
| mvc __LC_LAST_UPDATE_CLOCK(8),__LC_BOOT_CLOCK+1 |
| spt 6f-.LPG0(%r13) |
| mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13) |
| l %r15,.Lstack-.LPG0(%r13) |
| brasl %r14,verify_facilities |
| brasl %r14,startup_kernel |
| |
| .Lstack: |
| .long 0x8000 + (1<<(PAGE_SHIFT+BOOT_STACK_ORDER)) - STACK_FRAME_OVERHEAD |
| .align 8 |
| 6: .long 0x7fffffff,0xffffffff |
| |
| .Lctl: .quad 0x04040000 # cr0: AFP registers & secondary space |
| .quad 0 # cr1: primary space segment table |
| .quad .Lduct # cr2: dispatchable unit control table |
| .quad 0 # cr3: instruction authorization |
| .quad 0xffff # cr4: instruction authorization |
| .quad .Lduct # cr5: primary-aste origin |
| .quad 0 # cr6: I/O interrupts |
| .quad 0 # cr7: secondary space segment table |
| .quad 0 # cr8: access registers translation |
| .quad 0 # cr9: tracing off |
| .quad 0 # cr10: tracing off |
| .quad 0 # cr11: tracing off |
| .quad 0 # cr12: tracing off |
| .quad 0 # cr13: home space segment table |
| .quad 0xc0000000 # cr14: machine check handling off |
| .quad .Llinkage_stack # cr15: linkage stack operations |
| |
| .section .dma.data,"aw",@progbits |
| .Lduct: .long 0,.Laste,.Laste,0,.Lduald,0,0,0 |
| .long 0,0,0,0,0,0,0,0 |
| .Llinkage_stack: |
| .long 0,0,0x89000000,0,0,0,0x8a000000,0 |
| .align 64 |
| .Laste: .quad 0,0xffffffffffffffff,0,0,0,0,0,0 |
| .align 128 |
| .Lduald:.rept 8 |
| .long 0x80000000,0,0,0 # invalid access-list entries |
| .endr |
| .previous |
| |
| #include "head_kdump.S" |
| |
| # |
| # params at 10400 (setup.h) |
| # Must be keept in sync with struct parmarea in setup.h |
| # |
| .org PARMAREA |
| .quad 0 # IPL_DEVICE |
| .quad 0 # INITRD_START |
| .quad 0 # INITRD_SIZE |
| .quad 0 # OLDMEM_BASE |
| .quad 0 # OLDMEM_SIZE |
| |
| .org COMMAND_LINE |
| .byte "root=/dev/ram0 ro" |
| .byte 0 |
| |
| .org EARLY_SCCB_OFFSET |
| .fill 4096 |
| |
| .org HEAD_END |
