| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * AM33XX Arch Power Management Routines |
| * |
| * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ |
| * Dave Gerlach |
| */ |
| |
| #include <linux/cpuidle.h> |
| #include <linux/platform_data/pm33xx.h> |
| #include <linux/suspend.h> |
| #include <asm/cpuidle.h> |
| #include <asm/smp_scu.h> |
| #include <asm/suspend.h> |
| #include <linux/errno.h> |
| #include <linux/clk.h> |
| #include <linux/cpu.h> |
| #include <linux/platform_data/gpio-omap.h> |
| #include <linux/pinctrl/pinmux.h> |
| #include <linux/wkup_m3_ipc.h> |
| #include <linux/of.h> |
| #include <linux/rtc.h> |
| |
| #include "cm33xx.h" |
| #include "common.h" |
| #include "control.h" |
| #include "clockdomain.h" |
| #include "iomap.h" |
| #include "pm.h" |
| #include "powerdomain.h" |
| #include "prm33xx.h" |
| #include "soc.h" |
| #include "sram.h" |
| #include "omap-secure.h" |
| |
| static struct powerdomain *cefuse_pwrdm, *gfx_pwrdm, *per_pwrdm, *mpu_pwrdm; |
| static struct clockdomain *gfx_l4ls_clkdm; |
| static void __iomem *scu_base; |
| |
| static int (*idle_fn)(u32 wfi_flags); |
| |
| struct amx3_idle_state { |
| int wfi_flags; |
| }; |
| |
| static struct amx3_idle_state *idle_states; |
| |
| static int am43xx_map_scu(void) |
| { |
| scu_base = ioremap(scu_a9_get_base(), SZ_256); |
| |
| if (!scu_base) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static int am33xx_check_off_mode_enable(void) |
| { |
| if (enable_off_mode) |
| pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n"); |
| |
| /* off mode not supported on am335x so return 0 always */ |
| return 0; |
| } |
| |
| static int am43xx_check_off_mode_enable(void) |
| { |
| /* |
| * Check for am437x-gp-evm which has the right Hardware design to |
| * support this mode reliably. |
| */ |
| if (of_machine_is_compatible("ti,am437x-gp-evm") && enable_off_mode) |
| return enable_off_mode; |
| else if (enable_off_mode) |
| pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n"); |
| |
| return 0; |
| } |
| |
| static int amx3_common_init(int (*idle)(u32 wfi_flags)) |
| { |
| gfx_pwrdm = pwrdm_lookup("gfx_pwrdm"); |
| per_pwrdm = pwrdm_lookup("per_pwrdm"); |
| mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); |
| |
| if ((!gfx_pwrdm) || (!per_pwrdm) || (!mpu_pwrdm)) |
| return -ENODEV; |
| |
| (void)clkdm_for_each(omap_pm_clkdms_setup, NULL); |
| |
| /* CEFUSE domain can be turned off post bootup */ |
| cefuse_pwrdm = pwrdm_lookup("cefuse_pwrdm"); |
| if (!cefuse_pwrdm) |
| pr_err("PM: Failed to get cefuse_pwrdm\n"); |
| else if (omap_type() != OMAP2_DEVICE_TYPE_GP) |
| pr_info("PM: Leaving EFUSE power domain active\n"); |
| else |
| omap_set_pwrdm_state(cefuse_pwrdm, PWRDM_POWER_OFF); |
| |
| idle_fn = idle; |
| |
| return 0; |
| } |
| |
| static int am33xx_suspend_init(int (*idle)(u32 wfi_flags)) |
| { |
| int ret; |
| |
| gfx_l4ls_clkdm = clkdm_lookup("gfx_l4ls_gfx_clkdm"); |
| |
| if (!gfx_l4ls_clkdm) { |
| pr_err("PM: Cannot lookup gfx_l4ls_clkdm clockdomains\n"); |
| return -ENODEV; |
| } |
| |
| ret = amx3_common_init(idle); |
| |
| return ret; |
| } |
| |
| static int am43xx_suspend_init(int (*idle)(u32 wfi_flags)) |
| { |
| int ret = 0; |
| |
| ret = am43xx_map_scu(); |
| if (ret) { |
| pr_err("PM: Could not ioremap SCU\n"); |
| return ret; |
| } |
| |
| ret = amx3_common_init(idle); |
| |
| return ret; |
| } |
| |
| static int amx3_suspend_deinit(void) |
| { |
| idle_fn = NULL; |
| return 0; |
| } |
| |
| static void amx3_pre_suspend_common(void) |
| { |
| omap_set_pwrdm_state(gfx_pwrdm, PWRDM_POWER_OFF); |
| } |
| |
| static void amx3_post_suspend_common(void) |
| { |
| int status; |
| /* |
| * Because gfx_pwrdm is the only one under MPU control, |
| * comment on transition status |
| */ |
| status = pwrdm_read_pwrst(gfx_pwrdm); |
| if (status != PWRDM_POWER_OFF) |
| pr_err("PM: GFX domain did not transition: %x\n", status); |
| } |
| |
| static int am33xx_suspend(unsigned int state, int (*fn)(unsigned long), |
| unsigned long args) |
| { |
| int ret = 0; |
| |
| amx3_pre_suspend_common(); |
| ret = cpu_suspend(args, fn); |
| amx3_post_suspend_common(); |
| |
| /* |
| * BUG: GFX_L4LS clock domain needs to be woken up to |
| * ensure thet L4LS clock domain does not get stuck in |
| * transition. If that happens L3 module does not get |
| * disabled, thereby leading to PER power domain |
| * transition failing |
| */ |
| |
| clkdm_wakeup(gfx_l4ls_clkdm); |
| clkdm_sleep(gfx_l4ls_clkdm); |
| |
| return ret; |
| } |
| |
| static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long), |
| unsigned long args) |
| { |
| int ret = 0; |
| |
| /* Suspend secure side on HS devices */ |
| if (omap_type() != OMAP2_DEVICE_TYPE_GP) { |
| if (optee_available) |
| omap_smccc_smc(AM43xx_PPA_SVC_PM_SUSPEND, 0); |
| else |
| omap_secure_dispatcher(AM43xx_PPA_SVC_PM_SUSPEND, |
| FLAG_START_CRITICAL, |
| 0, 0, 0, 0, 0); |
| } |
| |
| amx3_pre_suspend_common(); |
| scu_power_mode(scu_base, SCU_PM_POWEROFF); |
| ret = cpu_suspend(args, fn); |
| scu_power_mode(scu_base, SCU_PM_NORMAL); |
| |
| if (!am43xx_check_off_mode_enable()) |
| amx3_post_suspend_common(); |
| |
| /* |
| * Resume secure side on HS devices. |
| * |
| * Note that even on systems with OP-TEE available this resume call is |
| * issued to the ROM. This is because upon waking from suspend the ROM |
| * is restored as the secure monitor. On systems with OP-TEE ROM will |
| * restore OP-TEE during this call. |
| */ |
| if (omap_type() != OMAP2_DEVICE_TYPE_GP) |
| omap_secure_dispatcher(AM43xx_PPA_SVC_PM_RESUME, |
| FLAG_START_CRITICAL, |
| 0, 0, 0, 0, 0); |
| |
| return ret; |
| } |
| |
| static int am33xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args) |
| { |
| int ret = 0; |
| |
| if (omap_irq_pending() || need_resched()) |
| return ret; |
| |
| ret = cpu_suspend(args, fn); |
| |
| return ret; |
| } |
| |
| static int am43xx_cpu_suspend(int (*fn)(unsigned long), unsigned long args) |
| { |
| int ret = 0; |
| |
| if (!scu_base) |
| return 0; |
| |
| scu_power_mode(scu_base, SCU_PM_DORMANT); |
| ret = cpu_suspend(args, fn); |
| scu_power_mode(scu_base, SCU_PM_NORMAL); |
| |
| return ret; |
| } |
| |
| static void amx3_begin_suspend(void) |
| { |
| cpu_idle_poll_ctrl(true); |
| } |
| |
| static void amx3_finish_suspend(void) |
| { |
| cpu_idle_poll_ctrl(false); |
| } |
| |
| |
| static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void) |
| { |
| if (soc_is_am33xx()) |
| return &am33xx_pm_sram; |
| else if (soc_is_am437x()) |
| return &am43xx_pm_sram; |
| else |
| return NULL; |
| } |
| |
| static void am43xx_save_context(void) |
| { |
| } |
| |
| static void am33xx_save_context(void) |
| { |
| omap_intc_save_context(); |
| } |
| |
| static void am33xx_restore_context(void) |
| { |
| omap_intc_restore_context(); |
| } |
| |
| static void am43xx_restore_context(void) |
| { |
| /* |
| * HACK: restore dpll_per_clkdcoldo register contents, to avoid |
| * breaking suspend-resume |
| */ |
| writel_relaxed(0x0, AM33XX_L4_WK_IO_ADDRESS(0x44df2e14)); |
| } |
| |
| static struct am33xx_pm_platform_data am33xx_ops = { |
| .init = am33xx_suspend_init, |
| .deinit = amx3_suspend_deinit, |
| .soc_suspend = am33xx_suspend, |
| .cpu_suspend = am33xx_cpu_suspend, |
| .begin_suspend = amx3_begin_suspend, |
| .finish_suspend = amx3_finish_suspend, |
| .get_sram_addrs = amx3_get_sram_addrs, |
| .save_context = am33xx_save_context, |
| .restore_context = am33xx_restore_context, |
| .check_off_mode_enable = am33xx_check_off_mode_enable, |
| }; |
| |
| static struct am33xx_pm_platform_data am43xx_ops = { |
| .init = am43xx_suspend_init, |
| .deinit = amx3_suspend_deinit, |
| .soc_suspend = am43xx_suspend, |
| .cpu_suspend = am43xx_cpu_suspend, |
| .begin_suspend = amx3_begin_suspend, |
| .finish_suspend = amx3_finish_suspend, |
| .get_sram_addrs = amx3_get_sram_addrs, |
| .save_context = am43xx_save_context, |
| .restore_context = am43xx_restore_context, |
| .check_off_mode_enable = am43xx_check_off_mode_enable, |
| }; |
| |
| static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void) |
| { |
| if (soc_is_am33xx()) |
| return &am33xx_ops; |
| else if (soc_is_am437x()) |
| return &am43xx_ops; |
| else |
| return NULL; |
| } |
| |
| #ifdef CONFIG_SUSPEND |
| /* |
| * Block system suspend initially. Later on pm33xx sets up it's own |
| * platform_suspend_ops after probe. That depends also on loaded |
| * wkup_m3_ipc and booted am335x-pm-firmware.elf. |
| */ |
| static int amx3_suspend_block(suspend_state_t state) |
| { |
| pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or am335x-pm-firmware.elf\n"); |
| |
| return -EINVAL; |
| } |
| |
| static int amx3_pm_valid(suspend_state_t state) |
| { |
| switch (state) { |
| case PM_SUSPEND_STANDBY: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static const struct platform_suspend_ops amx3_blocked_pm_ops = { |
| .begin = amx3_suspend_block, |
| .valid = amx3_pm_valid, |
| }; |
| |
| static void __init amx3_block_suspend(void) |
| { |
| suspend_set_ops(&amx3_blocked_pm_ops); |
| } |
| #else |
| static inline void amx3_block_suspend(void) |
| { |
| } |
| #endif /* CONFIG_SUSPEND */ |
| |
| int __init amx3_common_pm_init(void) |
| { |
| struct am33xx_pm_platform_data *pdata; |
| struct platform_device_info devinfo; |
| |
| pdata = am33xx_pm_get_pdata(); |
| |
| memset(&devinfo, 0, sizeof(devinfo)); |
| devinfo.name = "pm33xx"; |
| devinfo.data = pdata; |
| devinfo.size_data = sizeof(*pdata); |
| devinfo.id = -1; |
| platform_device_register_full(&devinfo); |
| amx3_block_suspend(); |
| |
| return 0; |
| } |
| |
| static int __init amx3_idle_init(struct device_node *cpu_node, int cpu) |
| { |
| struct device_node *state_node; |
| struct amx3_idle_state states[CPUIDLE_STATE_MAX]; |
| int i; |
| int state_count = 1; |
| |
| for (i = 0; ; i++) { |
| state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); |
| if (!state_node) |
| break; |
| |
| if (!of_device_is_available(state_node)) |
| continue; |
| |
| if (i == CPUIDLE_STATE_MAX) { |
| pr_warn("%s: cpuidle states reached max possible\n", |
| __func__); |
| break; |
| } |
| |
| states[state_count].wfi_flags = 0; |
| |
| if (of_property_read_bool(state_node, "ti,idle-wkup-m3")) |
| states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 | |
| WFI_FLAG_FLUSH_CACHE; |
| |
| state_count++; |
| } |
| |
| idle_states = kcalloc(state_count, sizeof(*idle_states), GFP_KERNEL); |
| if (!idle_states) |
| return -ENOMEM; |
| |
| for (i = 1; i < state_count; i++) |
| idle_states[i].wfi_flags = states[i].wfi_flags; |
| |
| return 0; |
| } |
| |
| static int amx3_idle_enter(unsigned long index) |
| { |
| struct amx3_idle_state *idle_state = &idle_states[index]; |
| |
| if (!idle_state) |
| return -EINVAL; |
| |
| if (idle_fn) |
| idle_fn(idle_state->wfi_flags); |
| |
| return 0; |
| } |
| |
| static struct cpuidle_ops amx3_cpuidle_ops __initdata = { |
| .init = amx3_idle_init, |
| .suspend = amx3_idle_enter, |
| }; |
| |
| CPUIDLE_METHOD_OF_DECLARE(pm33xx_idle, "ti,am3352", &amx3_cpuidle_ops); |
| CPUIDLE_METHOD_OF_DECLARE(pm43xx_idle, "ti,am4372", &amx3_cpuidle_ops); |