| // SPDX-License-Identifier: GPL-2.0 |
| |
| #ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG |
| #include <linux/memblock.h> |
| #endif |
| #include <linux/console.h> |
| #include <linux/cpu.h> |
| #include <linux/kexec.h> |
| #include <linux/slab.h> |
| #include <linux/panic_notifier.h> |
| |
| #include <xen/xen.h> |
| #include <xen/features.h> |
| #include <xen/interface/sched.h> |
| #include <xen/interface/version.h> |
| #include <xen/page.h> |
| |
| #include <asm/xen/hypercall.h> |
| #include <asm/xen/hypervisor.h> |
| #include <asm/cpu.h> |
| #include <asm/e820/api.h> |
| #include <asm/setup.h> |
| |
| #include "xen-ops.h" |
| #include "smp.h" |
| #include "pmu.h" |
| |
| EXPORT_SYMBOL_GPL(hypercall_page); |
| |
| /* |
| * Pointer to the xen_vcpu_info structure or |
| * &HYPERVISOR_shared_info->vcpu_info[cpu]. See xen_hvm_init_shared_info |
| * and xen_vcpu_setup for details. By default it points to share_info->vcpu_info |
| * but during boot it is switched to point to xen_vcpu_info. |
| * The pointer is used in __xen_evtchn_do_upcall to acknowledge pending events. |
| */ |
| DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu); |
| DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info); |
| |
| /* Linux <-> Xen vCPU id mapping */ |
| DEFINE_PER_CPU(uint32_t, xen_vcpu_id); |
| EXPORT_PER_CPU_SYMBOL(xen_vcpu_id); |
| |
| unsigned long *machine_to_phys_mapping = (void *)MACH2PHYS_VIRT_START; |
| EXPORT_SYMBOL(machine_to_phys_mapping); |
| unsigned long machine_to_phys_nr; |
| EXPORT_SYMBOL(machine_to_phys_nr); |
| |
| struct start_info *xen_start_info; |
| EXPORT_SYMBOL_GPL(xen_start_info); |
| |
| struct shared_info xen_dummy_shared_info; |
| |
| __read_mostly int xen_have_vector_callback; |
| EXPORT_SYMBOL_GPL(xen_have_vector_callback); |
| |
| /* |
| * NB: These need to live in .data or alike because they're used by |
| * xen_prepare_pvh() which runs before clearing the bss. |
| */ |
| enum xen_domain_type __ro_after_init xen_domain_type = XEN_NATIVE; |
| EXPORT_SYMBOL_GPL(xen_domain_type); |
| uint32_t __ro_after_init xen_start_flags; |
| EXPORT_SYMBOL(xen_start_flags); |
| |
| /* |
| * Point at some empty memory to start with. We map the real shared_info |
| * page as soon as fixmap is up and running. |
| */ |
| struct shared_info *HYPERVISOR_shared_info = &xen_dummy_shared_info; |
| |
| static int xen_cpu_up_online(unsigned int cpu) |
| { |
| xen_init_lock_cpu(cpu); |
| return 0; |
| } |
| |
| int xen_cpuhp_setup(int (*cpu_up_prepare_cb)(unsigned int), |
| int (*cpu_dead_cb)(unsigned int)) |
| { |
| int rc; |
| |
| rc = cpuhp_setup_state_nocalls(CPUHP_XEN_PREPARE, |
| "x86/xen/guest:prepare", |
| cpu_up_prepare_cb, cpu_dead_cb); |
| if (rc >= 0) { |
| rc = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, |
| "x86/xen/guest:online", |
| xen_cpu_up_online, NULL); |
| if (rc < 0) |
| cpuhp_remove_state_nocalls(CPUHP_XEN_PREPARE); |
| } |
| |
| return rc >= 0 ? 0 : rc; |
| } |
| |
| static void xen_vcpu_setup_restore(int cpu) |
| { |
| /* Any per_cpu(xen_vcpu) is stale, so reset it */ |
| xen_vcpu_info_reset(cpu); |
| |
| /* |
| * For PVH and PVHVM, setup online VCPUs only. The rest will |
| * be handled by hotplug. |
| */ |
| if (xen_pv_domain() || |
| (xen_hvm_domain() && cpu_online(cpu))) |
| xen_vcpu_setup(cpu); |
| } |
| |
| /* |
| * On restore, set the vcpu placement up again. |
| * If it fails, then we're in a bad state, since |
| * we can't back out from using it... |
| */ |
| void xen_vcpu_restore(void) |
| { |
| int cpu; |
| |
| for_each_possible_cpu(cpu) { |
| bool other_cpu = (cpu != smp_processor_id()); |
| bool is_up; |
| |
| if (xen_vcpu_nr(cpu) == XEN_VCPU_ID_INVALID) |
| continue; |
| |
| /* Only Xen 4.5 and higher support this. */ |
| is_up = HYPERVISOR_vcpu_op(VCPUOP_is_up, |
| xen_vcpu_nr(cpu), NULL) > 0; |
| |
| if (other_cpu && is_up && |
| HYPERVISOR_vcpu_op(VCPUOP_down, xen_vcpu_nr(cpu), NULL)) |
| BUG(); |
| |
| if (xen_pv_domain() || xen_feature(XENFEAT_hvm_safe_pvclock)) |
| xen_setup_runstate_info(cpu); |
| |
| xen_vcpu_setup_restore(cpu); |
| |
| if (other_cpu && is_up && |
| HYPERVISOR_vcpu_op(VCPUOP_up, xen_vcpu_nr(cpu), NULL)) |
| BUG(); |
| } |
| } |
| |
| void xen_vcpu_info_reset(int cpu) |
| { |
| if (xen_vcpu_nr(cpu) < MAX_VIRT_CPUS) { |
| per_cpu(xen_vcpu, cpu) = |
| &HYPERVISOR_shared_info->vcpu_info[xen_vcpu_nr(cpu)]; |
| } else { |
| /* Set to NULL so that if somebody accesses it we get an OOPS */ |
| per_cpu(xen_vcpu, cpu) = NULL; |
| } |
| } |
| |
| void xen_vcpu_setup(int cpu) |
| { |
| struct vcpu_register_vcpu_info info; |
| int err; |
| struct vcpu_info *vcpup; |
| |
| BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); |
| |
| /* |
| * This path is called on PVHVM at bootup (xen_hvm_smp_prepare_boot_cpu) |
| * and at restore (xen_vcpu_restore). Also called for hotplugged |
| * VCPUs (cpu_init -> xen_hvm_cpu_prepare_hvm). |
| * However, the hypercall can only be done once (see below) so if a VCPU |
| * is offlined and comes back online then let's not redo the hypercall. |
| * |
| * For PV it is called during restore (xen_vcpu_restore) and bootup |
| * (xen_setup_vcpu_info_placement). The hotplug mechanism does not |
| * use this function. |
| */ |
| if (xen_hvm_domain()) { |
| if (per_cpu(xen_vcpu, cpu) == &per_cpu(xen_vcpu_info, cpu)) |
| return; |
| } |
| |
| vcpup = &per_cpu(xen_vcpu_info, cpu); |
| info.mfn = arbitrary_virt_to_mfn(vcpup); |
| info.offset = offset_in_page(vcpup); |
| |
| /* |
| * N.B. This hypercall can _only_ be called once per CPU. |
| * Subsequent calls will error out with -EINVAL. This is due to |
| * the fact that hypervisor has no unregister variant and this |
| * hypercall does not allow to over-write info.mfn and |
| * info.offset. |
| */ |
| err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, xen_vcpu_nr(cpu), |
| &info); |
| if (err) |
| panic("register_vcpu_info failed: cpu=%d err=%d\n", cpu, err); |
| |
| per_cpu(xen_vcpu, cpu) = vcpup; |
| } |
| |
| void __init xen_banner(void) |
| { |
| unsigned version = HYPERVISOR_xen_version(XENVER_version, NULL); |
| struct xen_extraversion extra; |
| |
| HYPERVISOR_xen_version(XENVER_extraversion, &extra); |
| |
| pr_info("Booting kernel on %s\n", pv_info.name); |
| pr_info("Xen version: %u.%u%s%s\n", |
| version >> 16, version & 0xffff, extra.extraversion, |
| xen_feature(XENFEAT_mmu_pt_update_preserve_ad) |
| ? " (preserve-AD)" : ""); |
| } |
| |
| /* Check if running on Xen version (major, minor) or later */ |
| bool xen_running_on_version_or_later(unsigned int major, unsigned int minor) |
| { |
| unsigned int version; |
| |
| if (!xen_domain()) |
| return false; |
| |
| version = HYPERVISOR_xen_version(XENVER_version, NULL); |
| if ((((version >> 16) == major) && ((version & 0xffff) >= minor)) || |
| ((version >> 16) > major)) |
| return true; |
| return false; |
| } |
| |
| void __init xen_add_preferred_consoles(void) |
| { |
| add_preferred_console("xenboot", 0, NULL); |
| if (!boot_params.screen_info.orig_video_isVGA) |
| add_preferred_console("tty", 0, NULL); |
| add_preferred_console("hvc", 0, NULL); |
| if (boot_params.screen_info.orig_video_isVGA) |
| add_preferred_console("tty", 0, NULL); |
| } |
| |
| void xen_reboot(int reason) |
| { |
| struct sched_shutdown r = { .reason = reason }; |
| int cpu; |
| |
| for_each_online_cpu(cpu) |
| xen_pmu_finish(cpu); |
| |
| if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r)) |
| BUG(); |
| } |
| |
| static int reboot_reason = SHUTDOWN_reboot; |
| static bool xen_legacy_crash; |
| void xen_emergency_restart(void) |
| { |
| xen_reboot(reboot_reason); |
| } |
| |
| static int |
| xen_panic_event(struct notifier_block *this, unsigned long event, void *ptr) |
| { |
| if (!kexec_crash_loaded()) { |
| if (xen_legacy_crash) |
| xen_reboot(SHUTDOWN_crash); |
| |
| reboot_reason = SHUTDOWN_crash; |
| |
| /* |
| * If panic_timeout==0 then we are supposed to wait forever. |
| * However, to preserve original dom0 behavior we have to drop |
| * into hypervisor. (domU behavior is controlled by its |
| * config file) |
| */ |
| if (panic_timeout == 0) |
| panic_timeout = -1; |
| } |
| return NOTIFY_DONE; |
| } |
| |
| static int __init parse_xen_legacy_crash(char *arg) |
| { |
| xen_legacy_crash = true; |
| return 0; |
| } |
| early_param("xen_legacy_crash", parse_xen_legacy_crash); |
| |
| static struct notifier_block xen_panic_block = { |
| .notifier_call = xen_panic_event, |
| .priority = INT_MIN |
| }; |
| |
| int xen_panic_handler_init(void) |
| { |
| atomic_notifier_chain_register(&panic_notifier_list, &xen_panic_block); |
| return 0; |
| } |
| |
| void xen_pin_vcpu(int cpu) |
| { |
| static bool disable_pinning; |
| struct sched_pin_override pin_override; |
| int ret; |
| |
| if (disable_pinning) |
| return; |
| |
| pin_override.pcpu = cpu; |
| ret = HYPERVISOR_sched_op(SCHEDOP_pin_override, &pin_override); |
| |
| /* Ignore errors when removing override. */ |
| if (cpu < 0) |
| return; |
| |
| switch (ret) { |
| case -ENOSYS: |
| pr_warn("Unable to pin on physical cpu %d. In case of problems consider vcpu pinning.\n", |
| cpu); |
| disable_pinning = true; |
| break; |
| case -EPERM: |
| WARN(1, "Trying to pin vcpu without having privilege to do so\n"); |
| disable_pinning = true; |
| break; |
| case -EINVAL: |
| case -EBUSY: |
| pr_warn("Physical cpu %d not available for pinning. Check Xen cpu configuration.\n", |
| cpu); |
| break; |
| case 0: |
| break; |
| default: |
| WARN(1, "rc %d while trying to pin vcpu\n", ret); |
| disable_pinning = true; |
| } |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| void xen_arch_register_cpu(int num) |
| { |
| arch_register_cpu(num); |
| } |
| EXPORT_SYMBOL(xen_arch_register_cpu); |
| |
| void xen_arch_unregister_cpu(int num) |
| { |
| arch_unregister_cpu(num); |
| } |
| EXPORT_SYMBOL(xen_arch_unregister_cpu); |
| #endif |