Merge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental)
OMAP: omap_device: only override _noirq methods, not normal suspend/resume
PM / Runtime: Correct documentation of pm_runtime_irq_safe()
ARM: mach-shmobile: sh7372 LCDC1 suspend fix
sh-sci / PM: Use power.irq_safe
PM: Use spinlock instead of mutex in clock management functions
diff --git a/MAINTAINERS b/MAINTAINERS
index 069ee3b..1a8cc60 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1883,7 +1883,7 @@
F: drivers/connector/
CONTROL GROUPS (CGROUPS)
-M: Paul Menage <menage@google.com>
+M: Paul Menage <paul@paulmenage.org>
M: Li Zefan <lizf@cn.fujitsu.com>
L: containers@lists.linux-foundation.org
S: Maintained
@@ -1932,7 +1932,7 @@
F: tools/power/cpupower
CPUSETS
-M: Paul Menage <menage@google.com>
+M: Paul Menage <paul@paulmenage.org>
W: http://www.bullopensource.org/cpuset/
W: http://oss.sgi.com/projects/cpusets/
S: Supported
@@ -5532,6 +5532,7 @@
SAMSUNG AUDIO (ASoC) DRIVERS
M: Jassi Brar <jassisinghbrar@gmail.com>
+M: Sangbeom Kim <sbkim73@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/samsung
@@ -7087,7 +7088,7 @@
F: drivers/mmc/host/vub300.c
W1 DALLAS'S 1-WIRE BUS
-M: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+M: Evgeniy Polyakov <zbr@ioremap.net>
S: Maintained
F: Documentation/w1/
F: drivers/w1/
diff --git a/arch/alpha/include/asm/sysinfo.h b/arch/alpha/include/asm/sysinfo.h
index 086aba2..e77d77c 100644
--- a/arch/alpha/include/asm/sysinfo.h
+++ b/arch/alpha/include/asm/sysinfo.h
@@ -27,13 +27,4 @@
#define UAC_NOFIX 2
#define UAC_SIGBUS 4
-
-#ifdef __KERNEL__
-
-/* This is the shift that is applied to the UAC bits as stored in the
- per-thread flags. See thread_info.h. */
-#define UAC_SHIFT 6
-
-#endif
-
#endif /* __ASM_ALPHA_SYSINFO_H */
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 6f32f9c..ff73db0 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -74,9 +74,9 @@
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_POLLING_NRFLAG 8 /* poll_idle is polling NEED_RESCHED */
#define TIF_DIE_IF_KERNEL 9 /* dik recursion lock */
-#define TIF_UAC_NOPRINT 10 /* see sysinfo.h */
-#define TIF_UAC_NOFIX 11
-#define TIF_UAC_SIGBUS 12
+#define TIF_UAC_NOPRINT 10 /* ! Preserve sequence of following */
+#define TIF_UAC_NOFIX 11 /* ! flags as they match */
+#define TIF_UAC_SIGBUS 12 /* ! userspace part of 'osf_sysinfo' */
#define TIF_MEMDIE 13 /* is terminating due to OOM killer */
#define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */
#define TIF_FREEZE 16 /* is freezing for suspend */
@@ -97,7 +97,7 @@
#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \
| _TIF_SYSCALL_TRACE)
-#define ALPHA_UAC_SHIFT 10
+#define ALPHA_UAC_SHIFT TIF_UAC_NOPRINT
#define ALPHA_UAC_MASK (1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
1 << TIF_UAC_SIGBUS)
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 326f0a2..01e8715 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -42,6 +42,7 @@
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/sysinfo.h>
+#include <asm/thread_info.h>
#include <asm/hwrpb.h>
#include <asm/processor.h>
@@ -633,9 +634,10 @@
case GSI_UACPROC:
if (nbytes < sizeof(unsigned int))
return -EINVAL;
- w = (current_thread_info()->flags >> UAC_SHIFT) & UAC_BITMASK;
- if (put_user(w, (unsigned int __user *)buffer))
- return -EFAULT;
+ w = (current_thread_info()->flags >> ALPHA_UAC_SHIFT) &
+ UAC_BITMASK;
+ if (put_user(w, (unsigned int __user *)buffer))
+ return -EFAULT;
return 1;
case GSI_PROC_TYPE:
@@ -756,8 +758,8 @@
case SSIN_UACPROC:
again:
old = current_thread_info()->flags;
- new = old & ~(UAC_BITMASK << UAC_SHIFT);
- new = new | (w & UAC_BITMASK) << UAC_SHIFT;
+ new = old & ~(UAC_BITMASK << ALPHA_UAC_SHIFT);
+ new = new | (w & UAC_BITMASK) << ALPHA_UAC_SHIFT;
if (cmpxchg(¤t_thread_info()->flags,
old, new) != old)
goto again;
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index b9c28f3..6acea1f 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -360,7 +360,7 @@
.quad sys_newuname
.quad sys_nanosleep /* 340 */
.quad sys_mremap
- .quad sys_nfsservctl
+ .quad sys_ni_syscall /* old nfsservctl */
.quad sys_setresuid
.quad sys_getresuid
.quad sys_pciconfig_read /* 345 */
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 80f7896..9943e9e 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -178,7 +178,7 @@
CALL(sys_ni_syscall) /* vm86 */
CALL(sys_ni_syscall) /* was sys_query_module */
CALL(sys_poll)
- CALL(sys_nfsservctl)
+ CALL(sys_ni_syscall) /* was nfsservctl */
/* 170 */ CALL(sys_setresgid16)
CALL(sys_getresgid16)
CALL(sys_prctl)
diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S
index c7fd394..6eba535 100644
--- a/arch/avr32/kernel/syscall_table.S
+++ b/arch/avr32/kernel/syscall_table.S
@@ -158,7 +158,7 @@
.long sys_sched_rr_get_interval
.long sys_nanosleep
.long sys_poll
- .long sys_nfsservctl /* 145 */
+ .long sys_ni_syscall /* 145 was nfsservctl */
.long sys_setresgid
.long sys_getresgid
.long sys_prctl
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 225d311..e413729 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1543,7 +1543,7 @@
.long _sys_ni_syscall /* for vm86 */
.long _sys_ni_syscall /* old "query_module" */
.long _sys_ni_syscall /* sys_poll */
- .long _sys_nfsservctl
+ .long _sys_ni_syscall /* old nfsservctl */
.long _sys_setresgid /* setresgid16 */ /* 170 */
.long _sys_getresgid /* getresgid16 */
.long _sys_prctl
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index 1161883..592fbe9 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -771,7 +771,7 @@
.long sys_ni_syscall /* sys_vm86 */
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* old nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 84fed7e9..c3ea4694 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -714,7 +714,7 @@
.long sys_ni_syscall /* sys_vm86 */
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* Old nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
diff --git a/arch/cris/include/asm/serial.h b/arch/cris/include/asm/serial.h
new file mode 100644
index 0000000..af7535a
--- /dev/null
+++ b/arch/cris/include/asm/serial.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_SERIAL_H */
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 017d6d7..5ba23f7 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1358,7 +1358,7 @@
.long sys_ni_syscall /* for vm86 */
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* Old nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S
index f4b2e67..4be2ea2 100644
--- a/arch/h8300/kernel/syscalls.S
+++ b/arch/h8300/kernel/syscalls.S
@@ -183,7 +183,7 @@
.long SYMBOL_NAME(sys_ni_syscall) /* for vm86 */
.long SYMBOL_NAME(sys_ni_syscall) /* sys_query_module */
.long SYMBOL_NAME(sys_poll)
- .long SYMBOL_NAME(sys_nfsservctl)
+ .long SYMBOL_NAME(sys_ni_syscall) /* old nfsservctl */
.long SYMBOL_NAME(sys_setresgid16) /* 170 */
.long SYMBOL_NAME(sys_getresgid16)
.long SYMBOL_NAME(sys_prctl)
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 97dd2ab..198c753 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1614,7 +1614,7 @@
data8 sys_sched_get_priority_min
data8 sys_sched_rr_get_interval
data8 sys_nanosleep
- data8 sys_nfsservctl
+ data8 sys_ni_syscall // old nfsservctl
data8 sys_prctl // 1170
data8 sys_getpagesize
data8 sys_mmap2
diff --git a/arch/m32r/kernel/syscall_table.S b/arch/m32r/kernel/syscall_table.S
index 528f2e6..f365c19 100644
--- a/arch/m32r/kernel/syscall_table.S
+++ b/arch/m32r/kernel/syscall_table.S
@@ -168,7 +168,7 @@
.long sys_tas /* vm86 syscall holder */
.long sys_ni_syscall /* query_module syscall holder */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* was nfsservctl */
.long sys_setresgid /* 170 */
.long sys_getresgid
.long sys_prctl
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index 00d1452..c468f2e 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -189,7 +189,7 @@
.long sys_getpagesize
.long sys_ni_syscall /* old "query_module" */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* old nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index d915a122..8789daa 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -173,7 +173,7 @@
.long sys_ni_syscall /* sys_vm86 */
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* old nfsservctl */
.long sys_setresgid /* 170 */
.long sys_getresgid
.long sys_prctl
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index e521420..865bc7a 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -424,7 +424,7 @@
sys sys_getresuid 3
sys sys_ni_syscall 0 /* was sys_query_module */
sys sys_poll 3
- sys sys_nfsservctl 3
+ sys sys_ni_syscall 0 /* was nfsservctl */
sys sys_setresgid 3 /* 4190 */
sys sys_getresgid 3
sys sys_prctl 5
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 85874d6..fb7334b 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -299,7 +299,7 @@
PTR sys_ni_syscall /* 5170, was get_kernel_syms */
PTR sys_ni_syscall /* was query_module */
PTR sys_quotactl
- PTR sys_nfsservctl
+ PTR sys_ni_syscall /* was nfsservctl */
PTR sys_ni_syscall /* res. for getpmsg */
PTR sys_ni_syscall /* 5175 for putpmsg */
PTR sys_ni_syscall /* res. for afs_syscall */
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index b85842f..f9296e8 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -294,7 +294,7 @@
PTR sys_ni_syscall /* 6170, was get_kernel_syms */
PTR sys_ni_syscall /* was query_module */
PTR sys_quotactl
- PTR compat_sys_nfsservctl
+ PTR sys_ni_syscall /* was nfsservctl */
PTR sys_ni_syscall /* res. for getpmsg */
PTR sys_ni_syscall /* 6175 for putpmsg */
PTR sys_ni_syscall /* res. for afs_syscall */
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 46c4763..4d7c982 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -392,7 +392,7 @@
PTR sys_getresuid
PTR sys_ni_syscall /* was query_module */
PTR sys_poll
- PTR compat_sys_nfsservctl
+ PTR sys_ni_syscall /* was nfsservctl */
PTR sys_setresgid /* 4190 */
PTR sys_getresgid
PTR sys_prctl
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index ae435e1..3e3620d 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -589,7 +589,7 @@
.long sys_ni_syscall /* vm86 */
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* was nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 2de8551..c65f75a 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -54,6 +54,7 @@
#define ODSR_CLEAR 0x1c00
#define LTLEECSR_ENABLE_ALL 0xFFC000FC
#define ESCSR_CLEAR 0x07120204
+#define IECSR_CLEAR 0x80000000
#define RIO_PORT1_EDCSR 0x0640
#define RIO_PORT2_EDCSR 0x0680
@@ -1089,11 +1090,11 @@
if (offset == 0) {
out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
- out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR);
out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
} else {
out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
- out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), 0);
+ out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR);
out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
}
}
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 08ab9aa..7526db6 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -665,12 +665,6 @@
lgfr %r4,%r4 # long
jg sys_poll # branch to system call
-ENTRY(compat_sys_nfsservctl_wrapper)
- lgfr %r2,%r2 # int
- llgtr %r3,%r3 # struct compat_nfsctl_arg*
- llgtr %r4,%r4 # union compat_nfsctl_res*
- jg compat_sys_nfsservctl # branch to system call
-
ENTRY(sys32_setresgid16_wrapper)
llgfr %r2,%r2 # __kernel_old_gid_emu31_t
llgfr %r3,%r3 # __kernel_old_gid_emu31_t
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 068f846..f297456 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -396,17 +396,19 @@
static __init void rescue_initrd(void)
{
#ifdef CONFIG_BLK_DEV_INITRD
+ unsigned long min_initrd_addr = (unsigned long) _end + (4UL << 20);
/*
- * Move the initrd right behind the bss section in case it starts
- * within the bss section. So we don't overwrite it when the bss
- * section gets cleared.
+ * Just like in case of IPL from VM reader we make sure there is a
+ * gap of 4MB between end of kernel and start of initrd.
+ * That way we can also be sure that saving an NSS will succeed,
+ * which however only requires different segments.
*/
if (!INITRD_START || !INITRD_SIZE)
return;
- if (INITRD_START >= (unsigned long) __bss_stop)
+ if (INITRD_START >= min_initrd_addr)
return;
- memmove(__bss_stop, (void *) INITRD_START, INITRD_SIZE);
- INITRD_START = (unsigned long) __bss_stop;
+ memmove((void *) min_initrd_addr, (void *) INITRD_START, INITRD_SIZE);
+ INITRD_START = min_initrd_addr;
#endif
}
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 04361d5..48c7102 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -1220,7 +1220,7 @@
/* sysfs: create fcp kset for mixing attr group and bin attrs */
reipl_fcp_kset = kset_create_and_add(IPL_FCP_STR, NULL,
&reipl_kset->kobj);
- if (!reipl_kset) {
+ if (!reipl_fcp_kset) {
free_page((unsigned long) reipl_block_fcp);
return -ENOMEM;
}
@@ -1618,7 +1618,8 @@
static void stop_run(struct shutdown_trigger *trigger)
{
- if (strcmp(trigger->name, ON_PANIC_STR) == 0)
+ if (strcmp(trigger->name, ON_PANIC_STR) == 0 ||
+ strcmp(trigger->name, ON_RESTART_STR) == 0)
disabled_wait((unsigned long) __builtin_return_address(0));
while (sigp(smp_processor_id(), sigp_stop) == sigp_busy)
cpu_relax();
@@ -1717,7 +1718,7 @@
/* on restart */
static struct shutdown_trigger on_restart_trigger = {ON_RESTART_STR,
- &reipl_action};
+ &stop_action};
static ssize_t on_restart_show(struct kobject *kobj,
struct kobj_attribute *attr, char *page)
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 6ee39ef..73eb08c 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -177,7 +177,7 @@
NI_SYSCALL /* for vm86 */
NI_SYSCALL /* old sys_query_module */
SYSCALL(sys_poll,sys_poll,sys32_poll_wrapper)
-SYSCALL(sys_nfsservctl,sys_nfsservctl,compat_sys_nfsservctl_wrapper)
+NI_SYSCALL /* old nfsservctl */
SYSCALL(sys_setresgid16,sys_ni_syscall,sys32_setresgid16_wrapper) /* 170 old setresgid16 syscall */
SYSCALL(sys_getresgid16,sys_ni_syscall,sys32_getresgid16_wrapper) /* old getresgid16 syscall */
SYSCALL(sys_prctl,sys_prctl,sys32_prctl_wrapper)
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index 39b051d..293e39c 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -185,7 +185,7 @@
.long sys_ni_syscall /* vm86 */
.long sys_ni_syscall /* old "query_module" */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* was nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index 089c4d8..ceb34b9 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -189,7 +189,7 @@
.long sys_ni_syscall /* vm86 */
.long sys_ni_syscall /* old "query_module" */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* was nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S
index 44e5faf..d97f3eb 100644
--- a/arch/sparc/kernel/sys32.S
+++ b/arch/sparc/kernel/sys32.S
@@ -81,7 +81,6 @@
SIGN2(sys32_fadvise64_64, compat_sys_fadvise64_64, %o0, %o5)
SIGN2(sys32_bdflush, sys_bdflush, %o0, %o1)
SIGN1(sys32_mlockall, sys_mlockall, %o0)
-SIGN1(sys32_nfsservctl, compat_sys_nfsservctl, %o0)
SIGN1(sys32_clock_nanosleep, compat_sys_clock_nanosleep, %o1)
SIGN1(sys32_timer_settime, compat_sys_timer_settime, %o1)
SIGN1(sys32_io_submit, compat_sys_io_submit, %o1)
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 6e492d5..09d8ec4 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -67,7 +67,7 @@
/*235*/ .long sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall
/*240*/ .long sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler
/*245*/ .long sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep
-/*250*/ .long sys_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
+/*250*/ .long sys_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_ni_syscall
/*255*/ .long sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep
/*260*/ .long sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun
/*265*/ .long sys_timer_delete, sys_timer_create, sys_nis_syscall, sys_io_setup, sys_io_destroy
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index f566518..c9296ab 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -145,7 +145,7 @@
.word sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall
/*240*/ .word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler
.word sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep
-/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
+/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nis_syscall
.word sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep
/*260*/ .word sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun
.word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index a0e866d..54edb207 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -672,7 +672,7 @@
.quad sys32_vm86_warning /* vm86 */
.quad quiet_ni_syscall /* query_module */
.quad sys_poll
- .quad compat_sys_nfsservctl
+ .quad quiet_ni_syscall /* old nfsservctl */
.quad sys_setresgid16 /* 170 */
.quad sys_getresgid16
.quad sys_prctl
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index d92641c..2010405 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -414,7 +414,7 @@
__SYSCALL(__NR_quotactl, sys_quotactl)
#define __NR_nfsservctl 180
-__SYSCALL(__NR_nfsservctl, sys_nfsservctl)
+__SYSCALL(__NR_nfsservctl, sys_ni_syscall)
/* reserved for LiS/STREAMS */
#define __NR_getpmsg 181
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 08119a3..6b96110 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -149,7 +149,6 @@
*/
static int mtrr_rendezvous_handler(void *info)
{
-#ifdef CONFIG_SMP
struct set_mtrr_data *data = info;
/*
@@ -171,7 +170,6 @@
} else if (mtrr_aps_delayed_init || !cpu_online(smp_processor_id())) {
mtrr_if->set_all();
}
-#endif
return 0;
}
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 5c1a9197..f3f6f53 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -54,6 +54,7 @@
#include <asm/ftrace.h>
#include <asm/irq_vectors.h>
#include <asm/cpufeature.h>
+#include <asm/alternative-asm.h>
/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
#include <linux/elf-em.h>
@@ -873,12 +874,7 @@
661: pushl_cfi $do_general_protection
662:
.section .altinstructions,"a"
- .balign 4
- .long 661b
- .long 663f
- .word X86_FEATURE_XMM
- .byte 662b-661b
- .byte 664f-663f
+ altinstruction_entry 661b, 663f, X86_FEATURE_XMM, 662b-661b, 664f-663f
.previous
.section .altinstr_replacement,"ax"
663: pushl $do_simd_coprocessor_error
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index fbb0a04..bc19be3 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -168,7 +168,7 @@
.long ptregs_vm86
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
- .long sys_nfsservctl
+ .long sys_ni_syscall /* Old nfsservctl */
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 7000e74b..58425ad 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -689,7 +689,9 @@
irq_attr.trigger = 1;
irq_attr.polarity = 1;
io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr);
- }
+ } else
+ pentry->irq = 0; /* No irq */
+
switch (pentry->type) {
case SFI_DEV_TYPE_IPC:
/* ID as IRQ is a hack that will go away */
diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h
index a6f934f..798ee6d 100644
--- a/arch/xtensa/include/asm/unistd.h
+++ b/arch/xtensa/include/asm/unistd.h
@@ -455,7 +455,7 @@
#define __NR_quotactl 204
__SYSCALL(204, sys_quotactl, 4)
#define __NR_nfsservctl 205
-__SYSCALL(205, sys_nfsservctl, 3)
+__SYSCALL(205, sys_ni_syscall, 0)
#define __NR__sysctl 206
__SYSCALL(206, sys_sysctl, 1)
#define __NR_bdflush 207
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index cf7a0c7..65cd748 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -397,6 +397,7 @@
static int release_nodes(struct device *dev, struct list_head *first,
struct list_head *end, unsigned long flags)
+ __releases(&dev->devres_lock)
{
LIST_HEAD(todo);
int cnt;
diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 33e1bed..a4760e0 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -376,7 +376,7 @@
return err;
}
-static __initdata DECLARE_COMPLETION(setup_done);
+static DECLARE_COMPLETION(setup_done);
static int handle(const char *name, mode_t mode, struct device *dev)
{
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index bbb03e6..06ed6b4 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -521,11 +521,6 @@
if (!firmware_p)
return -EINVAL;
- if (WARN_ON(usermodehelper_is_disabled())) {
- dev_err(device, "firmware: %s will not be loaded\n", name);
- return -EBUSY;
- }
-
*firmware_p = firmware = kzalloc(sizeof(*firmware), GFP_KERNEL);
if (!firmware) {
dev_err(device, "%s: kmalloc(struct firmware) failed\n",
@@ -539,6 +534,12 @@
return 0;
}
+ if (WARN_ON(usermodehelper_is_disabled())) {
+ dev_err(device, "firmware: %s will not be loaded\n", name);
+ retval = -EBUSY;
+ goto out;
+ }
+
if (uevent)
dev_dbg(device, "firmware: requesting %s\n", name);
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 0cad9c7..99a5272 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -33,7 +33,7 @@
/**
* arch_setup_pdev_archdata - Allow manipulation of archdata before its used
- * @dev: platform device
+ * @pdev: platform device
*
* This is called before platform_device_add() such that any pdev_archdata may
* be setup before the platform_notifier is called. So if a user needs to
diff --git a/drivers/char/msm_smd_pkt.c b/drivers/char/msm_smd_pkt.c
index b6f8a65..8eca55d 100644
--- a/drivers/char/msm_smd_pkt.c
+++ b/drivers/char/msm_smd_pkt.c
@@ -379,9 +379,8 @@
for (i = 0; i < NUM_SMD_PKT_PORTS; ++i) {
smd_pkt_devp[i] = kzalloc(sizeof(struct smd_pkt_dev),
GFP_KERNEL);
- if (IS_ERR(smd_pkt_devp[i])) {
- r = PTR_ERR(smd_pkt_devp[i]);
- pr_err("kmalloc() failed %d\n", r);
+ if (!smd_pkt_devp[i]) {
+ pr_err("kmalloc() failed\n");
goto clean_cdevs;
}
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 41841a3..17cef86 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1198,6 +1198,10 @@
{
struct fw_unit *unit = fw_unit(dev);
struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
+ struct sbp2_logical_unit *lu;
+
+ list_for_each_entry(lu, &tgt->lu_list, link)
+ cancel_delayed_work_sync(&lu->work);
sbp2_target_put(tgt);
return 0;
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
index 68810fd..aa83de9 100644
--- a/drivers/firmware/google/gsmi.c
+++ b/drivers/firmware/google/gsmi.c
@@ -420,7 +420,7 @@
static efi_status_t gsmi_set_variable(efi_char16_t *name,
efi_guid_t *vendor,
- unsigned long attr,
+ u32 attr,
unsigned long data_size,
void *data)
{
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index ee1d701..56a8554 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -878,7 +878,7 @@
int pp_reg, lvds_reg;
u32 val;
enum pipe panel_pipe = PIPE_A;
- bool locked = locked;
+ bool locked = true;
if (HAS_PCH_SPLIT(dev_priv->dev)) {
pp_reg = PCH_PP_CONTROL;
@@ -7238,8 +7238,6 @@
intel_encoder_clones(dev, encoder->clone_mask);
}
- intel_panel_setup_backlight(dev);
-
/* disable all the possible outputs/crtcs before entering KMS mode */
drm_helper_disable_unused_functions(dev);
}
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index c4c40be..d22f241 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -114,7 +114,6 @@
void __iomem *amb_mmio;
struct i5k_device_attribute *attrs;
unsigned int num_attrs;
- unsigned long chipset_id;
};
static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
@@ -444,8 +443,6 @@
goto out;
}
- data->chipset_id = devid;
-
res = 0;
out:
pci_dev_put(pcidev);
@@ -478,23 +475,13 @@
return res;
}
-static unsigned long i5k_channel_pci_id(struct i5k_amb_data *data,
- unsigned long channel)
-{
- switch (data->chipset_id) {
- case PCI_DEVICE_ID_INTEL_5000_ERR:
- return PCI_DEVICE_ID_INTEL_5000_FBD0 + channel;
- case PCI_DEVICE_ID_INTEL_5400_ERR:
- return PCI_DEVICE_ID_INTEL_5400_FBD0 + channel;
- default:
- BUG();
- }
-}
-
-static unsigned long chipset_ids[] = {
- PCI_DEVICE_ID_INTEL_5000_ERR,
- PCI_DEVICE_ID_INTEL_5400_ERR,
- 0
+static struct {
+ unsigned long err;
+ unsigned long fbd0;
+} chipset_ids[] __devinitdata = {
+ { PCI_DEVICE_ID_INTEL_5000_ERR, PCI_DEVICE_ID_INTEL_5000_FBD0 },
+ { PCI_DEVICE_ID_INTEL_5400_ERR, PCI_DEVICE_ID_INTEL_5400_FBD0 },
+ { 0, 0 }
};
#ifdef MODULE
@@ -510,8 +497,7 @@
{
struct i5k_amb_data *data;
struct resource *reso;
- int i;
- int res = -ENODEV;
+ int i, res;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
@@ -520,22 +506,22 @@
/* Figure out where the AMB registers live */
i = 0;
do {
- res = i5k_find_amb_registers(data, chipset_ids[i]);
+ res = i5k_find_amb_registers(data, chipset_ids[i].err);
+ if (res == 0)
+ break;
i++;
- } while (res && chipset_ids[i]);
+ } while (chipset_ids[i].err);
if (res)
goto err;
/* Copy the DIMM presence map for the first two channels */
- res = i5k_channel_probe(&data->amb_present[0],
- i5k_channel_pci_id(data, 0));
+ res = i5k_channel_probe(&data->amb_present[0], chipset_ids[i].fbd0);
if (res)
goto err;
/* Copy the DIMM presence map for the optional second two channels */
- i5k_channel_probe(&data->amb_present[2],
- i5k_channel_pci_id(data, 1));
+ i5k_channel_probe(&data->amb_present[2], chipset_ids[i].fbd0 + 1);
/* Set up resource regions */
reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME);
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index d7926f4..eab1161 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -211,8 +211,7 @@
if (data->comp[mid].ohm <= ohm) {
*i_low = mid;
*i_high = mid - 1;
- }
- if (data->comp[mid].ohm > ohm) {
+ } else {
*i_low = mid + 1;
*i_high = mid;
}
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 0c731ca..b228e09 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -146,6 +146,7 @@
* @stop: stop condition
* @xfer_complete: acknowledge completion for a I2C message
* @result: controller propogated result
+ * @regulator: pointer to i2c regulator
* @busy: Busy doing transfer
*/
struct nmk_i2c_dev {
@@ -417,12 +418,12 @@
writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
dev->virtbase + I2C_IMSCR);
- timeout = wait_for_completion_interruptible_timeout(
+ timeout = wait_for_completion_timeout(
&dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
dev_err(&dev->pdev->dev,
- "wait_for_completion_interruptible_timeout"
+ "wait_for_completion_timeout"
"returned %d waiting for event\n", timeout);
status = timeout;
}
@@ -504,12 +505,12 @@
writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
dev->virtbase + I2C_IMSCR);
- timeout = wait_for_completion_interruptible_timeout(
+ timeout = wait_for_completion_timeout(
&dev->xfer_complete, dev->adap.timeout);
if (timeout < 0) {
dev_err(&dev->pdev->dev,
- "wait_for_completion_interruptible_timeout"
+ "wait_for_completion_timeout "
"returned %d waiting for event\n", timeout);
status = timeout;
}
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 1a766cf..2dfb631 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1139,41 +1139,12 @@
return 0;
}
-#ifdef CONFIG_SUSPEND
-static int omap_i2c_suspend(struct device *dev)
-{
- if (!pm_runtime_suspended(dev))
- if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend)
- dev->bus->pm->runtime_suspend(dev);
-
- return 0;
-}
-
-static int omap_i2c_resume(struct device *dev)
-{
- if (!pm_runtime_suspended(dev))
- if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume)
- dev->bus->pm->runtime_resume(dev);
-
- return 0;
-}
-
-static struct dev_pm_ops omap_i2c_pm_ops = {
- .suspend = omap_i2c_suspend,
- .resume = omap_i2c_resume,
-};
-#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
-#else
-#define OMAP_I2C_PM_OPS NULL
-#endif
-
static struct platform_driver omap_i2c_driver = {
.probe = omap_i2c_probe,
.remove = omap_i2c_remove,
.driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
- .pm = OMAP_I2C_PM_OPS,
},
};
diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c
index b982603..8c00937 100644
--- a/drivers/leds/leds-ams-delta.c
+++ b/drivers/leds/leds-ams-delta.c
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 3ebe382..ea21855 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -662,6 +662,11 @@
static void bd2802_unregister_led_classdev(struct bd2802_led *led)
{
cancel_work_sync(&led->work);
+ led_classdev_unregister(&led->cdev_led2b);
+ led_classdev_unregister(&led->cdev_led2g);
+ led_classdev_unregister(&led->cdev_led2r);
+ led_classdev_unregister(&led->cdev_led1b);
+ led_classdev_unregister(&led->cdev_led1g);
led_classdev_unregister(&led->cdev_led1r);
}
diff --git a/drivers/leds/leds-hp6xx.c b/drivers/leds/leds-hp6xx.c
index e4ce1fd..bcfbd3a 100644
--- a/drivers/leds/leds-hp6xx.c
+++ b/drivers/leds/leds-hp6xx.c
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 0a4d86c..2d6423c 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -146,6 +146,7 @@
config INTEL_MID_PTI
tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
+ depends on PCI
default n
help
The PTI (Parallel Trace Interface) driver directs
diff --git a/drivers/misc/ab8500-pwm.c b/drivers/misc/ab8500-pwm.c
index 54e3d05..3590315 100644
--- a/drivers/misc/ab8500-pwm.c
+++ b/drivers/misc/ab8500-pwm.c
@@ -164,5 +164,5 @@
module_exit(ab8500_pwm_exit);
MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
-MODULE_ALIAS("AB8500 PWM driver");
+MODULE_ALIAS("platform:ab8500-pwm");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/fsa9480.c b/drivers/misc/fsa9480.c
index 5325a7e..27dc0d2 100644
--- a/drivers/misc/fsa9480.c
+++ b/drivers/misc/fsa9480.c
@@ -455,7 +455,7 @@
fail2:
if (client->irq)
- free_irq(client->irq, NULL);
+ free_irq(client->irq, usbsw);
fail1:
i2c_set_clientdata(client, NULL);
kfree(usbsw);
@@ -466,7 +466,7 @@
{
struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
if (client->irq)
- free_irq(client->irq, NULL);
+ free_irq(client->irq, usbsw);
i2c_set_clientdata(client, NULL);
sysfs_remove_group(&client->dev.kobj, &fsa9480_group);
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index 8653bd0..06df187 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -33,6 +33,8 @@
#include <linux/mutex.h>
#include <linux/miscdevice.h>
#include <linux/pti.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
#define DRIVERNAME "pti"
#define PCINAME "pciPTI"
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 54c91ff..ba168a7 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -338,6 +338,12 @@
/* Unknow packet? */
default:
type = *ptr;
+ if (st_gdata->list[type] == NULL) {
+ pr_err("chip/interface misbehavior dropping"
+ " frame starting with 0x%02x", type);
+ goto done;
+
+ }
st_gdata->rx_skb = alloc_skb(
st_gdata->list[type]->max_frame_size,
GFP_ATOMIC);
@@ -354,6 +360,7 @@
ptr++;
count--;
}
+done:
spin_unlock_irqrestore(&st_gdata->lock, flags);
pr_debug("done %s", __func__);
return;
@@ -717,9 +724,10 @@
*/
spin_lock_irqsave(&st_gdata->lock, flags);
for (i = ST_BT; i < ST_MAX_CHANNELS; i++) {
- if (st_gdata->list[i] != NULL)
+ if (st_gdata->is_registered[i] == true)
pr_err("%d not un-registered", i);
st_gdata->list[i] = NULL;
+ st_gdata->is_registered[i] = false;
}
st_gdata->protos_registered = 0;
spin_unlock_irqrestore(&st_gdata->lock, flags);
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 38fd2f0..3a35805 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -68,6 +68,7 @@
if (unlikely(skb->data[5] != 0)) {
pr_err("no proper response during fw download");
pr_err("data6 %x", skb->data[5]);
+ kfree_skb(skb);
return; /* keep waiting for the proper response */
}
/* becos of all the script being downloaded */
@@ -210,6 +211,7 @@
pr_err(" waiting for ver info- timed out ");
return -ETIMEDOUT;
}
+ INIT_COMPLETION(kim_gdata->kim_rcvd);
version =
MAKEWORD(kim_gdata->resp_buffer[13],
@@ -298,6 +300,7 @@
switch (((struct bts_action *)ptr)->type) {
case ACTION_SEND_COMMAND: /* action send */
+ pr_debug("S");
action_ptr = &(((struct bts_action *)ptr)->data[0]);
if (unlikely
(((struct hci_command *)action_ptr)->opcode ==
@@ -335,6 +338,10 @@
release_firmware(kim_gdata->fw_entry);
return -ETIMEDOUT;
}
+ /* reinit completion before sending for the
+ * relevant wait
+ */
+ INIT_COMPLETION(kim_gdata->kim_rcvd);
/*
* Free space found in uart buffer, call st_int_write
@@ -361,6 +368,7 @@
}
break;
case ACTION_WAIT_EVENT: /* wait */
+ pr_debug("W");
if (!wait_for_completion_timeout
(&kim_gdata->kim_rcvd,
msecs_to_jiffies(CMD_RESP_TIME))) {
@@ -434,11 +442,17 @@
{
long err = 0;
long retry = POR_RETRY_COUNT;
+ struct ti_st_plat_data *pdata;
struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
pr_info(" %s", __func__);
+ pdata = kim_gdata->kim_pdev->dev.platform_data;
do {
+ /* platform specific enabling code here */
+ if (pdata->chip_enable)
+ pdata->chip_enable(kim_gdata);
+
/* Configure BT nShutdown to HIGH state */
gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
mdelay(5); /* FIXME: a proper toggle */
@@ -460,6 +474,12 @@
pr_info("ldisc_install = 0");
sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
NULL, "install");
+ /* the following wait is never going to be completed,
+ * since the ldisc was never installed, hence serving
+ * as a mdelay of LDISC_TIME msecs */
+ err = wait_for_completion_timeout
+ (&kim_gdata->ldisc_installed,
+ msecs_to_jiffies(LDISC_TIME));
err = -ETIMEDOUT;
continue;
} else {
@@ -472,6 +492,13 @@
pr_info("ldisc_install = 0");
sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
NULL, "install");
+ /* this wait might be completed, though in the
+ * tty_close() since the ldisc is already
+ * installed */
+ err = wait_for_completion_timeout
+ (&kim_gdata->ldisc_installed,
+ msecs_to_jiffies(LDISC_TIME));
+ err = -EINVAL;
continue;
} else { /* on success don't retry */
break;
@@ -489,6 +516,8 @@
{
long err = 0;
struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
+ struct ti_st_plat_data *pdata =
+ kim_gdata->kim_pdev->dev.platform_data;
INIT_COMPLETION(kim_gdata->ldisc_installed);
@@ -515,6 +544,10 @@
gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
mdelay(1);
gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
+
+ /* platform specific disable */
+ if (pdata->chip_disable)
+ pdata->chip_disable(kim_gdata);
return err;
}
diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c
index 3f24951..1ff460a 100644
--- a/drivers/misc/ti-st/st_ll.c
+++ b/drivers/misc/ti-st/st_ll.c
@@ -22,6 +22,7 @@
#define pr_fmt(fmt) "(stll) :" fmt
#include <linux/skbuff.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/ti_wilink_st.h>
/**********************************************************************/
@@ -37,6 +38,9 @@
static void ll_device_want_to_sleep(struct st_data_s *st_data)
{
+ struct kim_data_s *kim_data;
+ struct ti_st_plat_data *pdata;
+
pr_debug("%s", __func__);
/* sanity check */
if (st_data->ll_state != ST_LL_AWAKE)
@@ -46,10 +50,19 @@
send_ll_cmd(st_data, LL_SLEEP_ACK);
/* update state */
st_data->ll_state = ST_LL_ASLEEP;
+
+ /* communicate to platform about chip asleep */
+ kim_data = st_data->kim_data;
+ pdata = kim_data->kim_pdev->dev.platform_data;
+ if (pdata->chip_asleep)
+ pdata->chip_asleep(NULL);
}
static void ll_device_want_to_wakeup(struct st_data_s *st_data)
{
+ struct kim_data_s *kim_data;
+ struct ti_st_plat_data *pdata;
+
/* diff actions in diff states */
switch (st_data->ll_state) {
case ST_LL_ASLEEP:
@@ -70,6 +83,12 @@
}
/* update state */
st_data->ll_state = ST_LL_AWAKE;
+
+ /* communicate to platform about chip wakeup */
+ kim_data = st_data->kim_data;
+ pdata = kim_data->kim_pdev->dev.platform_data;
+ if (pdata->chip_asleep)
+ pdata->chip_awake(NULL);
}
/**********************************************************************/
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index 86ac38c..3bb1311 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -80,13 +80,13 @@
*/
static struct rio_dev **rionet_active;
-#define is_rionet_capable(pef, src_ops, dst_ops) \
- ((pef & RIO_PEF_INB_MBOX) && \
- (pef & RIO_PEF_INB_DOORBELL) && \
+#define is_rionet_capable(src_ops, dst_ops) \
+ ((src_ops & RIO_SRC_OPS_DATA_MSG) && \
+ (dst_ops & RIO_DST_OPS_DATA_MSG) && \
(src_ops & RIO_SRC_OPS_DOORBELL) && \
(dst_ops & RIO_DST_OPS_DOORBELL))
#define dev_rionet_capable(dev) \
- is_rionet_capable(dev->pef, dev->src_ops, dev->dst_ops)
+ is_rionet_capable(dev->src_ops, dev->dst_ops)
#define RIONET_MAC_MATCH(x) (*(u32 *)x == 0x00010001)
#define RIONET_GET_DESTID(x) (*(u16 *)(x + 4))
@@ -282,7 +282,6 @@
{
int i, rc = 0;
struct rionet_peer *peer, *tmp;
- u32 pwdcsr;
struct rionet_private *rnet = netdev_priv(ndev);
if (netif_msg_ifup(rnet))
@@ -332,13 +331,8 @@
continue;
}
- /*
- * If device has initialized inbound doorbells,
- * send a join message
- */
- rio_read_config_32(peer->rdev, RIO_WRITE_PORT_CSR, &pwdcsr);
- if (pwdcsr & RIO_DOORBELL_AVAIL)
- rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN);
+ /* Send a join message */
+ rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN);
}
out:
@@ -492,7 +486,7 @@
static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id)
{
int rc = -ENODEV;
- u32 lpef, lsrc_ops, ldst_ops;
+ u32 lsrc_ops, ldst_ops;
struct rionet_peer *peer;
struct net_device *ndev = NULL;
@@ -515,12 +509,11 @@
* on later probes
*/
if (!rionet_check) {
- rio_local_read_config_32(rdev->net->hport, RIO_PEF_CAR, &lpef);
rio_local_read_config_32(rdev->net->hport, RIO_SRC_OPS_CAR,
&lsrc_ops);
rio_local_read_config_32(rdev->net->hport, RIO_DST_OPS_CAR,
&ldst_ops);
- if (!is_rionet_capable(lpef, lsrc_ops, ldst_ops)) {
+ if (!is_rionet_capable(lsrc_ops, ldst_ops)) {
printk(KERN_ERR
"%s: local device is not network capable\n",
DRV_NAME);
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index ee89358..ebe77dd 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -505,8 +505,7 @@
rdev->dev.dma_mask = &rdev->dma_mask;
rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- if ((rdev->pef & RIO_PEF_INB_DOORBELL) &&
- (rdev->dst_ops & RIO_DST_OPS_DOORBELL))
+ if (rdev->dst_ops & RIO_DST_OPS_DOORBELL)
rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
0, 0xffff);
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 9329dbb..4e7c04e 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -152,10 +152,6 @@
goto retry_get_time;
}
- pr_debug("read time %04d.%02d.%02d %02d:%02d:%02d\n",
- 1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
- rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
-
rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
@@ -164,6 +160,11 @@
rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
rtc_tm->tm_year += 100;
+
+ pr_debug("read time %04d.%02d.%02d %02d:%02d:%02d\n",
+ 1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday,
+ rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec);
+
rtc_tm->tm_mon -= 1;
clk_disable(rtc_clk);
@@ -269,10 +270,9 @@
clk_enable(rtc_clk);
pr_debug("s3c_rtc_setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
alrm->enabled,
- 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
+ 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
-
alrm_en = readb(base + S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN;
writeb(0x00, base + S3C2410_RTCALM);
@@ -319,49 +319,7 @@
return 0;
}
-static int s3c_rtc_open(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
- int ret;
-
- ret = request_irq(s3c_rtc_alarmno, s3c_rtc_alarmirq,
- IRQF_DISABLED, "s3c2410-rtc alarm", rtc_dev);
-
- if (ret) {
- dev_err(dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret);
- return ret;
- }
-
- ret = request_irq(s3c_rtc_tickno, s3c_rtc_tickirq,
- IRQF_DISABLED, "s3c2410-rtc tick", rtc_dev);
-
- if (ret) {
- dev_err(dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret);
- goto tick_err;
- }
-
- return ret;
-
- tick_err:
- free_irq(s3c_rtc_alarmno, rtc_dev);
- return ret;
-}
-
-static void s3c_rtc_release(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
-
- /* do not clear AIE here, it may be needed for wake */
-
- free_irq(s3c_rtc_alarmno, rtc_dev);
- free_irq(s3c_rtc_tickno, rtc_dev);
-}
-
static const struct rtc_class_ops s3c_rtcops = {
- .open = s3c_rtc_open,
- .release = s3c_rtc_release,
.read_time = s3c_rtc_gettime,
.set_time = s3c_rtc_settime,
.read_alarm = s3c_rtc_getalarm,
@@ -425,6 +383,9 @@
{
struct rtc_device *rtc = platform_get_drvdata(dev);
+ free_irq(s3c_rtc_alarmno, rtc);
+ free_irq(s3c_rtc_tickno, rtc);
+
platform_set_drvdata(dev, NULL);
rtc_device_unregister(rtc);
@@ -548,10 +509,32 @@
s3c_rtc_setfreq(&pdev->dev, 1);
+ ret = request_irq(s3c_rtc_alarmno, s3c_rtc_alarmirq,
+ IRQF_DISABLED, "s3c2410-rtc alarm", rtc);
+ if (ret) {
+ dev_err(&pdev->dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret);
+ goto err_alarm_irq;
+ }
+
+ ret = request_irq(s3c_rtc_tickno, s3c_rtc_tickirq,
+ IRQF_DISABLED, "s3c2410-rtc tick", rtc);
+ if (ret) {
+ dev_err(&pdev->dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret);
+ free_irq(s3c_rtc_alarmno, rtc);
+ goto err_tick_irq;
+ }
+
clk_disable(rtc_clk);
return 0;
+ err_tick_irq:
+ free_irq(s3c_rtc_alarmno, rtc);
+
+ err_alarm_irq:
+ platform_set_drvdata(pdev, NULL);
+ rtc_device_unregister(rtc);
+
err_nortc:
s3c_rtc_enable(pdev, 0);
clk_disable(rtc_clk);
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index eb4e034..f1a2016 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -249,6 +249,7 @@
static int dasd_ioctl_read_profile(struct dasd_block *block, void __user *argp)
{
struct dasd_profile_info_t *data;
+ int rc = 0;
data = kmalloc(sizeof(*data), GFP_KERNEL);
if (!data)
@@ -279,11 +280,14 @@
spin_unlock_bh(&block->profile.lock);
} else {
spin_unlock_bh(&block->profile.lock);
- return -EIO;
+ rc = -EIO;
+ goto out;
}
if (copy_to_user(argp, data, sizeof(*data)))
- return -EFAULT;
- return 0;
+ rc = -EFAULT;
+out:
+ kfree(data);
+ return rc;
}
#else
static int dasd_ioctl_reset_profile(struct dasd_block *block)
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index be55fb2..837e0102 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -383,8 +383,10 @@
switch (sccb->header.response_code) {
case 0x0020:
set_bit(id, sclp_storage_ids);
- for (i = 0; i < sccb->assigned; i++)
- sclp_unassign_storage(sccb->entries[i] >> 16);
+ for (i = 0; i < sccb->assigned; i++) {
+ if (sccb->entries[i])
+ sclp_unassign_storage(sccb->entries[i] >> 16);
+ }
break;
default:
rc = -EIO;
diff --git a/drivers/staging/brcm80211/brcmsmac/otp.c b/drivers/staging/brcm80211/brcmsmac/otp.c
index 34253cf..4a70180 100644
--- a/drivers/staging/brcm80211/brcmsmac/otp.c
+++ b/drivers/staging/brcm80211/brcmsmac/otp.c
@@ -16,6 +16,7 @@
#include <linux/io.h>
#include <linux/errno.h>
+#include <linux/string.h>
#include <brcm_hw_ids.h>
#include <chipcommon.h>
diff --git a/drivers/staging/brcm80211/brcmsmac/types.h b/drivers/staging/brcm80211/brcmsmac/types.h
index bbf2189..823b5e4 100644
--- a/drivers/staging/brcm80211/brcmsmac/types.h
+++ b/drivers/staging/brcm80211/brcmsmac/types.h
@@ -18,6 +18,7 @@
#define _BRCM_TYPES_H_
#include <linux/types.h>
+#include <linux/io.h>
/* Bus types */
#define SI_BUS 0 /* SOC Interconnect */
diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c
index 9c0d2936..c3d73f8 100644
--- a/drivers/staging/octeon/ethernet-rgmii.c
+++ b/drivers/staging/octeon/ethernet-rgmii.c
@@ -26,6 +26,7 @@
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/interrupt.h>
#include <linux/phy.h>
#include <linux/ratelimit.h>
#include <net/dst.h>
diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c
index 9708254..d0e2d51 100644
--- a/drivers/staging/octeon/ethernet-spi.c
+++ b/drivers/staging/octeon/ethernet-spi.c
@@ -26,6 +26,7 @@
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/interrupt.h>
#include <net/dst.h>
#include <asm/octeon/octeon.h>
diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c
index 589a055..3d1279c 100644
--- a/drivers/staging/tidspbridge/core/dsp-clock.c
+++ b/drivers/staging/tidspbridge/core/dsp-clock.c
@@ -209,7 +209,6 @@
break;
#ifdef CONFIG_OMAP_MCBSP
case MCBSP_CLK:
- omap_mcbsp_set_io_type(MCBSP_ID(clk_id), OMAP_MCBSP_POLL_IO);
omap_mcbsp_request(MCBSP_ID(clk_id));
omap2_mcbsp_set_clks_src(MCBSP_ID(clk_id), MCBSP_CLKS_PAD_SRC);
break;
diff --git a/drivers/staging/zcache/tmem.c b/drivers/staging/zcache/tmem.c
index 975e34b..1ca66ea 100644
--- a/drivers/staging/zcache/tmem.c
+++ b/drivers/staging/zcache/tmem.c
@@ -604,7 +604,7 @@
struct tmem_obj *obj;
void *pampd;
bool ephemeral = is_ephemeral(pool);
- uint32_t ret = -1;
+ int ret = -1;
struct tmem_hashbucket *hb;
bool free = (get_and_free == 1) || ((get_and_free == 0) && ephemeral);
bool lock_held = false;
diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c
index 855a5bb..a3f5162 100644
--- a/drivers/staging/zcache/zcache-main.c
+++ b/drivers/staging/zcache/zcache-main.c
@@ -1158,7 +1158,7 @@
size_t clen;
int ret;
unsigned long count;
- struct page *page = virt_to_page(data);
+ struct page *page = (struct page *)(data);
struct zcache_client *cli = pool->client;
uint16_t client_id = get_client_id_from_client(cli);
unsigned long zv_mean_zsize;
@@ -1227,7 +1227,7 @@
int ret = 0;
BUG_ON(is_ephemeral(pool));
- zv_decompress(virt_to_page(data), pampd);
+ zv_decompress((struct page *)(data), pampd);
return ret;
}
@@ -1539,7 +1539,7 @@
goto out;
if (!zcache_freeze && zcache_do_preload(pool) == 0) {
/* preload does preempt_disable on success */
- ret = tmem_put(pool, oidp, index, page_address(page),
+ ret = tmem_put(pool, oidp, index, (char *)(page),
PAGE_SIZE, 0, is_ephemeral(pool));
if (ret < 0) {
if (is_ephemeral(pool))
@@ -1572,7 +1572,7 @@
pool = zcache_get_pool_by_id(cli_id, pool_id);
if (likely(pool != NULL)) {
if (atomic_read(&pool->obj_count) > 0)
- ret = tmem_get(pool, oidp, index, page_address(page),
+ ret = tmem_get(pool, oidp, index, (char *)(page),
&size, 0, is_ephemeral(pool));
zcache_put_pool(pool);
}
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index c24fb10..6a4ea29 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -2243,7 +2243,6 @@
case 0:
return iscsit_handle_recovery_datain_or_r2t(conn, buf,
hdr->itt, hdr->ttt, hdr->begrun, hdr->runlength);
- return 0;
case ISCSI_FLAG_SNACK_TYPE_STATUS:
return iscsit_handle_status_snack(conn, hdr->itt, hdr->ttt,
hdr->begrun, hdr->runlength);
diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
index f095e65..f1643db 100644
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -268,7 +268,7 @@
ISCSI_TCP);
if (IS_ERR(tpg_np)) {
iscsit_put_tpg(tpg);
- return ERR_PTR(PTR_ERR(tpg_np));
+ return ERR_CAST(tpg_np);
}
pr_debug("LIO_Target_ConfigFS: addnptotpg done!\n");
@@ -1285,7 +1285,7 @@
tiqn = iscsit_add_tiqn((unsigned char *)name);
if (IS_ERR(tiqn))
- return ERR_PTR(PTR_ERR(tiqn));
+ return ERR_CAST(tiqn);
/*
* Setup struct iscsi_wwn_stat_grps for se_wwn->fabric_stat_group.
*/
diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c
index 9806507..c4c68da 100644
--- a/drivers/target/iscsi/iscsi_target_erl1.c
+++ b/drivers/target/iscsi/iscsi_target_erl1.c
@@ -834,7 +834,7 @@
*/
list_for_each_entry(ooo_tmp, &sess->sess_ooo_cmdsn_list,
ooo_list) {
- while (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn)
+ if (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn)
continue;
list_add(&ooo_cmdsn->ooo_list,
diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c
index bcaf82f..daad362 100644
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -1013,19 +1013,9 @@
ISCSI_LOGIN_STATUS_TARGET_ERROR);
goto new_sess_out;
}
-#if 0
- if (!iscsi_ntop6((const unsigned char *)
- &sock_in6.sin6_addr.in6_u,
- (char *)&conn->ipv6_login_ip[0],
- IPV6_ADDRESS_SPACE)) {
- pr_err("iscsi_ntop6() failed\n");
- iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
- ISCSI_LOGIN_STATUS_TARGET_ERROR);
- goto new_sess_out;
- }
-#else
- pr_debug("Skipping iscsi_ntop6()\n");
-#endif
+ snprintf(conn->login_ip, sizeof(conn->login_ip), "%pI6c",
+ &sock_in6.sin6_addr.in6_u);
+ conn->login_port = ntohs(sock_in6.sin6_port);
} else {
memset(&sock_in, 0, sizeof(struct sockaddr_in));
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index 252e246..497b2e7 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -545,13 +545,13 @@
struct iscsi_param_list *src_param_list,
int leading)
{
- struct iscsi_param *new_param = NULL, *param = NULL;
+ struct iscsi_param *param = NULL;
+ struct iscsi_param *new_param = NULL;
struct iscsi_param_list *param_list = NULL;
param_list = kzalloc(sizeof(struct iscsi_param_list), GFP_KERNEL);
if (!param_list) {
- pr_err("Unable to allocate memory for"
- " struct iscsi_param_list.\n");
+ pr_err("Unable to allocate memory for struct iscsi_param_list.\n");
goto err_out;
}
INIT_LIST_HEAD(¶m_list->param_list);
@@ -567,8 +567,17 @@
new_param = kzalloc(sizeof(struct iscsi_param), GFP_KERNEL);
if (!new_param) {
- pr_err("Unable to allocate memory for"
- " struct iscsi_param.\n");
+ pr_err("Unable to allocate memory for struct iscsi_param.\n");
+ goto err_out;
+ }
+
+ new_param->name = kstrdup(param->name, GFP_KERNEL);
+ new_param->value = kstrdup(param->value, GFP_KERNEL);
+ if (!new_param->value || !new_param->name) {
+ kfree(new_param->value);
+ kfree(new_param->name);
+ kfree(new_param);
+ pr_err("Unable to allocate memory for parameter name/value.\n");
goto err_out;
}
@@ -580,32 +589,12 @@
new_param->use = param->use;
new_param->type_range = param->type_range;
- new_param->name = kzalloc(strlen(param->name) + 1, GFP_KERNEL);
- if (!new_param->name) {
- pr_err("Unable to allocate memory for"
- " parameter name.\n");
- goto err_out;
- }
-
- new_param->value = kzalloc(strlen(param->value) + 1,
- GFP_KERNEL);
- if (!new_param->value) {
- pr_err("Unable to allocate memory for"
- " parameter value.\n");
- goto err_out;
- }
-
- memcpy(new_param->name, param->name, strlen(param->name));
- new_param->name[strlen(param->name)] = '\0';
- memcpy(new_param->value, param->value, strlen(param->value));
- new_param->value[strlen(param->value)] = '\0';
-
list_add_tail(&new_param->p_list, ¶m_list->param_list);
}
- if (!list_empty(¶m_list->param_list))
+ if (!list_empty(¶m_list->param_list)) {
*dst_param_list = param_list;
- else {
+ } else {
pr_err("No parameters allocated.\n");
goto err_out;
}
diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c
index a1acb01..a0d23bc 100644
--- a/drivers/target/iscsi/iscsi_target_util.c
+++ b/drivers/target/iscsi/iscsi_target_util.c
@@ -243,7 +243,7 @@
if (!cmd->tmr_req) {
pr_err("Unable to allocate memory for"
" Task Management command!\n");
- return NULL;
+ goto out;
}
/*
* TASK_REASSIGN for ERL=2 / connection stays inside of
@@ -298,8 +298,6 @@
return cmd;
out:
iscsit_release_cmd(cmd);
- if (se_cmd)
- transport_free_se_cmd(se_cmd);
return NULL;
}
diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c
index 8ae09a1..89ae923 100644
--- a/drivers/target/target_core_cdb.c
+++ b/drivers/target/target_core_cdb.c
@@ -67,6 +67,7 @@
{
struct se_lun *lun = cmd->se_lun;
struct se_device *dev = cmd->se_dev;
+ struct se_portal_group *tpg = lun->lun_sep->sep_tpg;
unsigned char *buf;
/*
@@ -81,9 +82,13 @@
buf = transport_kmap_first_data_page(cmd);
- buf[0] = dev->transport->get_device_type(dev);
- if (buf[0] == TYPE_TAPE)
- buf[1] = 0x80;
+ if (dev == tpg->tpg_virt_lun0.lun_se_dev) {
+ buf[0] = 0x3f; /* Not connected */
+ } else {
+ buf[0] = dev->transport->get_device_type(dev);
+ if (buf[0] == TYPE_TAPE)
+ buf[1] = 0x80;
+ }
buf[2] = dev->transport->get_device_rev(dev);
/*
@@ -915,8 +920,8 @@
length += target_modesense_control(dev, &buf[offset+length]);
break;
default:
- pr_err("Got Unknown Mode Page: 0x%02x\n",
- cdb[2] & 0x3f);
+ pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n",
+ cdb[2] & 0x3f, cdb[3]);
return PYX_TRANSPORT_UNKNOWN_MODE_PAGE;
}
offset += length;
@@ -1072,8 +1077,6 @@
size -= 16;
}
- task->task_scsi_status = GOOD;
- transport_complete_task(task, 1);
err:
transport_kunmap_first_data_page(cmd);
@@ -1085,24 +1088,17 @@
* Note this is not used for TCM/pSCSI passthrough
*/
static int
-target_emulate_write_same(struct se_task *task, int write_same32)
+target_emulate_write_same(struct se_task *task, u32 num_blocks)
{
struct se_cmd *cmd = task->task_se_cmd;
struct se_device *dev = cmd->se_dev;
sector_t range;
sector_t lba = cmd->t_task_lba;
- unsigned int num_blocks;
int ret;
/*
- * Extract num_blocks from the WRITE_SAME_* CDB. Then use the explict
- * range when non zero is supplied, otherwise calculate the remaining
- * range based on ->get_blocks() - starting LBA.
+ * Use the explicit range when non zero is supplied, otherwise calculate
+ * the remaining range based on ->get_blocks() - starting LBA.
*/
- if (write_same32)
- num_blocks = get_unaligned_be32(&cmd->t_task_cdb[28]);
- else
- num_blocks = get_unaligned_be32(&cmd->t_task_cdb[10]);
-
if (num_blocks != 0)
range = num_blocks;
else
@@ -1117,8 +1113,6 @@
return ret;
}
- task->task_scsi_status = GOOD;
- transport_complete_task(task, 1);
return 0;
}
@@ -1165,13 +1159,23 @@
}
ret = target_emulate_unmap(task);
break;
+ case WRITE_SAME:
+ if (!dev->transport->do_discard) {
+ pr_err("WRITE_SAME emulation not supported"
+ " for: %s\n", dev->transport->name);
+ return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
+ }
+ ret = target_emulate_write_same(task,
+ get_unaligned_be16(&cmd->t_task_cdb[7]));
+ break;
case WRITE_SAME_16:
if (!dev->transport->do_discard) {
pr_err("WRITE_SAME_16 emulation not supported"
" for: %s\n", dev->transport->name);
return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
}
- ret = target_emulate_write_same(task, 0);
+ ret = target_emulate_write_same(task,
+ get_unaligned_be32(&cmd->t_task_cdb[10]));
break;
case VARIABLE_LENGTH_CMD:
service_action =
@@ -1184,7 +1188,8 @@
dev->transport->name);
return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE;
}
- ret = target_emulate_write_same(task, 1);
+ ret = target_emulate_write_same(task,
+ get_unaligned_be32(&cmd->t_task_cdb[28]));
break;
default:
pr_err("Unsupported VARIABLE_LENGTH_CMD SA:"
@@ -1219,8 +1224,14 @@
if (ret < 0)
return ret;
- task->task_scsi_status = GOOD;
- transport_complete_task(task, 1);
+ /*
+ * Handle the successful completion here unless a caller
+ * has explictly requested an asychronous completion.
+ */
+ if (!(cmd->se_cmd_flags & SCF_EMULATE_CDB_ASYNC)) {
+ task->task_scsi_status = GOOD;
+ transport_complete_task(task, 1);
+ }
return PYX_TRANSPORT_SENT_TO_TRANSPORT;
}
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index b38b6c9..ca6e4a4d 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -472,9 +472,9 @@
struct se_dev_entry *deve;
u32 i;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
list_for_each_entry(nacl, &tpg->acl_node_list, acl_list) {
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
spin_lock_irq(&nacl->device_list_lock);
for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) {
@@ -491,9 +491,9 @@
}
spin_unlock_irq(&nacl->device_list_lock);
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
}
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
}
static struct se_port *core_alloc_port(struct se_device *dev)
@@ -839,6 +839,24 @@
return ret;
}
+u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size)
+{
+ u32 tmp, aligned_max_sectors;
+ /*
+ * Limit max_sectors to a PAGE_SIZE aligned value for modern
+ * transport_allocate_data_tasks() operation.
+ */
+ tmp = rounddown((max_sectors * block_size), PAGE_SIZE);
+ aligned_max_sectors = (tmp / block_size);
+ if (max_sectors != aligned_max_sectors) {
+ printk(KERN_INFO "Rounding down aligned max_sectors from %u"
+ " to %u\n", max_sectors, aligned_max_sectors);
+ return aligned_max_sectors;
+ }
+
+ return max_sectors;
+}
+
void se_dev_set_default_attribs(
struct se_device *dev,
struct se_dev_limits *dev_limits)
@@ -878,6 +896,11 @@
* max_sectors is based on subsystem plugin dependent requirements.
*/
dev->se_sub_dev->se_dev_attrib.hw_max_sectors = limits->max_hw_sectors;
+ /*
+ * Align max_sectors down to PAGE_SIZE to follow transport_allocate_data_tasks()
+ */
+ limits->max_sectors = se_dev_align_max_sectors(limits->max_sectors,
+ limits->logical_block_size);
dev->se_sub_dev->se_dev_attrib.max_sectors = limits->max_sectors;
/*
* Set optimal_sectors from max_sectors, which can be lowered via
@@ -1242,6 +1265,11 @@
return -EINVAL;
}
}
+ /*
+ * Align max_sectors down to PAGE_SIZE to follow transport_allocate_data_tasks()
+ */
+ max_sectors = se_dev_align_max_sectors(max_sectors,
+ dev->se_sub_dev->se_dev_attrib.block_size);
dev->se_sub_dev->se_dev_attrib.max_sectors = max_sectors;
pr_debug("dev[%p]: SE Device max_sectors changed to %u\n",
@@ -1344,15 +1372,17 @@
*/
if (tpg->se_tpg_tfo->tpg_check_demo_mode(tpg)) {
struct se_node_acl *acl;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
list_for_each_entry(acl, &tpg->acl_node_list, acl_list) {
- if (acl->dynamic_node_acl) {
- spin_unlock_bh(&tpg->acl_node_lock);
+ if (acl->dynamic_node_acl &&
+ (!tpg->se_tpg_tfo->tpg_check_demo_mode_login_only ||
+ !tpg->se_tpg_tfo->tpg_check_demo_mode_login_only(tpg))) {
+ spin_unlock_irq(&tpg->acl_node_lock);
core_tpg_add_node_to_devs(acl, tpg);
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
}
}
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
}
return lun_p;
diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c
index f165469..55bbe08 100644
--- a/drivers/target/target_core_fabric_configfs.c
+++ b/drivers/target/target_core_fabric_configfs.c
@@ -481,7 +481,7 @@
se_nacl = tf->tf_ops.fabric_make_nodeacl(se_tpg, group, name);
if (IS_ERR(se_nacl))
- return ERR_PTR(PTR_ERR(se_nacl));
+ return ERR_CAST(se_nacl);
nacl_cg = &se_nacl->acl_group;
nacl_cg->default_groups = se_nacl->acl_default_groups;
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 1c1b849..7fd3a16 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -1598,14 +1598,14 @@
* from the decoded fabric module specific TransportID
* at *i_str.
*/
- spin_lock_bh(&tmp_tpg->acl_node_lock);
+ spin_lock_irq(&tmp_tpg->acl_node_lock);
dest_node_acl = __core_tpg_get_initiator_node_acl(
tmp_tpg, i_str);
if (dest_node_acl) {
atomic_inc(&dest_node_acl->acl_pr_ref_count);
smp_mb__after_atomic_inc();
}
- spin_unlock_bh(&tmp_tpg->acl_node_lock);
+ spin_unlock_irq(&tmp_tpg->acl_node_lock);
if (!dest_node_acl) {
core_scsi3_tpg_undepend_item(tmp_tpg);
@@ -3496,14 +3496,14 @@
/*
* Locate the destination struct se_node_acl from the received Transport ID
*/
- spin_lock_bh(&dest_se_tpg->acl_node_lock);
+ spin_lock_irq(&dest_se_tpg->acl_node_lock);
dest_node_acl = __core_tpg_get_initiator_node_acl(dest_se_tpg,
initiator_str);
if (dest_node_acl) {
atomic_inc(&dest_node_acl->acl_pr_ref_count);
smp_mb__after_atomic_inc();
}
- spin_unlock_bh(&dest_se_tpg->acl_node_lock);
+ spin_unlock_irq(&dest_se_tpg->acl_node_lock);
if (!dest_node_acl) {
pr_err("Unable to locate %s dest_node_acl for"
diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c
index 3dd81d2..e567e12 100644
--- a/drivers/target/target_core_rd.c
+++ b/drivers/target/target_core_rd.c
@@ -390,12 +390,10 @@
length = req->rd_size;
dst = sg_virt(&sg_d[i++]) + dst_offset;
- if (!dst)
- BUG();
+ BUG_ON(!dst);
src = sg_virt(&sg_s[j]) + src_offset;
- if (!src)
- BUG();
+ BUG_ON(!src);
dst_offset = 0;
src_offset = length;
@@ -415,8 +413,7 @@
length = req->rd_size;
dst = sg_virt(&sg_d[i]) + dst_offset;
- if (!dst)
- BUG();
+ BUG_ON(!dst);
if (sg_d[i].length == length) {
i++;
@@ -425,8 +422,7 @@
dst_offset = length;
src = sg_virt(&sg_s[j++]) + src_offset;
- if (!src)
- BUG();
+ BUG_ON(!src);
src_offset = 0;
page_end = 1;
@@ -510,12 +506,10 @@
length = req->rd_size;
src = sg_virt(&sg_s[i++]) + src_offset;
- if (!src)
- BUG();
+ BUG_ON(!src);
dst = sg_virt(&sg_d[j]) + dst_offset;
- if (!dst)
- BUG();
+ BUG_ON(!dst);
src_offset = 0;
dst_offset = length;
@@ -535,8 +529,7 @@
length = req->rd_size;
src = sg_virt(&sg_s[i]) + src_offset;
- if (!src)
- BUG();
+ BUG_ON(!src);
if (sg_s[i].length == length) {
i++;
@@ -545,8 +538,7 @@
src_offset = length;
dst = sg_virt(&sg_d[j++]) + dst_offset;
- if (!dst)
- BUG();
+ BUG_ON(!dst);
dst_offset = 0;
page_end = 1;
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index 4f1ba4c..162b736 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -137,15 +137,15 @@
{
struct se_node_acl *acl;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
list_for_each_entry(acl, &tpg->acl_node_list, acl_list) {
if (!strcmp(acl->initiatorname, initiatorname) &&
!acl->dynamic_node_acl) {
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return acl;
}
}
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return NULL;
}
@@ -298,13 +298,21 @@
tpg->se_tpg_tfo->tpg_release_fabric_acl(tpg, acl);
return NULL;
}
+ /*
+ * Here we only create demo-mode MappedLUNs from the active
+ * TPG LUNs if the fabric is not explictly asking for
+ * tpg_check_demo_mode_login_only() == 1.
+ */
+ if ((tpg->se_tpg_tfo->tpg_check_demo_mode_login_only != NULL) &&
+ (tpg->se_tpg_tfo->tpg_check_demo_mode_login_only(tpg) == 1))
+ do { ; } while (0);
+ else
+ core_tpg_add_node_to_devs(acl, tpg);
- core_tpg_add_node_to_devs(acl, tpg);
-
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
list_add_tail(&acl->acl_list, &tpg->acl_node_list);
tpg->num_node_acls++;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
pr_debug("%s_TPG[%u] - Added DYNAMIC ACL with TCQ Depth: %d for %s"
" Initiator Node: %s\n", tpg->se_tpg_tfo->get_fabric_name(),
@@ -354,7 +362,7 @@
{
struct se_node_acl *acl = NULL;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname);
if (acl) {
if (acl->dynamic_node_acl) {
@@ -362,7 +370,7 @@
pr_debug("%s_TPG[%u] - Replacing dynamic ACL"
" for %s\n", tpg->se_tpg_tfo->get_fabric_name(),
tpg->se_tpg_tfo->tpg_get_tag(tpg), initiatorname);
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
/*
* Release the locally allocated struct se_node_acl
* because * core_tpg_add_initiator_node_acl() returned
@@ -378,10 +386,10 @@
" Node %s already exists for TPG %u, ignoring"
" request.\n", tpg->se_tpg_tfo->get_fabric_name(),
initiatorname, tpg->se_tpg_tfo->tpg_get_tag(tpg));
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return ERR_PTR(-EEXIST);
}
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
if (!se_nacl) {
pr_err("struct se_node_acl pointer is NULL\n");
@@ -418,10 +426,10 @@
return ERR_PTR(-EINVAL);
}
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
list_add_tail(&acl->acl_list, &tpg->acl_node_list);
tpg->num_node_acls++;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
done:
pr_debug("%s_TPG[%hu] - Added ACL with TCQ Depth: %d for %s"
@@ -445,14 +453,14 @@
struct se_session *sess, *sess_tmp;
int dynamic_acl = 0;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
if (acl->dynamic_node_acl) {
acl->dynamic_node_acl = 0;
dynamic_acl = 1;
}
list_del(&acl->acl_list);
tpg->num_node_acls--;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
spin_lock_bh(&tpg->session_lock);
list_for_each_entry_safe(sess, sess_tmp,
@@ -503,21 +511,21 @@
struct se_node_acl *acl;
int dynamic_acl = 0;
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname);
if (!acl) {
pr_err("Access Control List entry for %s Initiator"
" Node %s does not exists for TPG %hu, ignoring"
" request.\n", tpg->se_tpg_tfo->get_fabric_name(),
initiatorname, tpg->se_tpg_tfo->tpg_get_tag(tpg));
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return -ENODEV;
}
if (acl->dynamic_node_acl) {
acl->dynamic_node_acl = 0;
dynamic_acl = 1;
}
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
spin_lock_bh(&tpg->session_lock);
list_for_each_entry(sess, &tpg->tpg_sess_list, sess_list) {
@@ -533,10 +541,10 @@
tpg->se_tpg_tfo->get_fabric_name(), initiatorname);
spin_unlock_bh(&tpg->session_lock);
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
if (dynamic_acl)
acl->dynamic_node_acl = 1;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return -EEXIST;
}
/*
@@ -571,10 +579,10 @@
if (init_sess)
tpg->se_tpg_tfo->close_session(init_sess);
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
if (dynamic_acl)
acl->dynamic_node_acl = 1;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return -EINVAL;
}
spin_unlock_bh(&tpg->session_lock);
@@ -590,10 +598,10 @@
initiatorname, tpg->se_tpg_tfo->get_fabric_name(),
tpg->se_tpg_tfo->tpg_get_tag(tpg));
- spin_lock_bh(&tpg->acl_node_lock);
+ spin_lock_irq(&tpg->acl_node_lock);
if (dynamic_acl)
acl->dynamic_node_acl = 1;
- spin_unlock_bh(&tpg->acl_node_lock);
+ spin_unlock_irq(&tpg->acl_node_lock);
return 0;
}
@@ -717,20 +725,20 @@
* not been released because of TFO->tpg_check_demo_mode_cache() == 1
* in transport_deregister_session().
*/
- spin_lock_bh(&se_tpg->acl_node_lock);
+ spin_lock_irq(&se_tpg->acl_node_lock);
list_for_each_entry_safe(nacl, nacl_tmp, &se_tpg->acl_node_list,
acl_list) {
list_del(&nacl->acl_list);
se_tpg->num_node_acls--;
- spin_unlock_bh(&se_tpg->acl_node_lock);
+ spin_unlock_irq(&se_tpg->acl_node_lock);
core_tpg_wait_for_nacl_pr_ref(nacl);
core_free_device_list_for_node(nacl, se_tpg);
se_tpg->se_tpg_tfo->tpg_release_fabric_acl(se_tpg, nacl);
- spin_lock_bh(&se_tpg->acl_node_lock);
+ spin_lock_irq(&se_tpg->acl_node_lock);
}
- spin_unlock_bh(&se_tpg->acl_node_lock);
+ spin_unlock_irq(&se_tpg->acl_node_lock);
if (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL)
core_tpg_release_virtual_lun0(se_tpg);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 8976032..8d0c58e 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -389,17 +389,18 @@
{
struct se_portal_group *se_tpg = se_sess->se_tpg;
struct se_node_acl *se_nacl;
+ unsigned long flags;
if (!se_tpg) {
transport_free_session(se_sess);
return;
}
- spin_lock_bh(&se_tpg->session_lock);
+ spin_lock_irqsave(&se_tpg->session_lock, flags);
list_del(&se_sess->sess_list);
se_sess->se_tpg = NULL;
se_sess->fabric_sess_ptr = NULL;
- spin_unlock_bh(&se_tpg->session_lock);
+ spin_unlock_irqrestore(&se_tpg->session_lock, flags);
/*
* Determine if we need to do extra work for this initiator node's
@@ -407,22 +408,22 @@
*/
se_nacl = se_sess->se_node_acl;
if (se_nacl) {
- spin_lock_bh(&se_tpg->acl_node_lock);
+ spin_lock_irqsave(&se_tpg->acl_node_lock, flags);
if (se_nacl->dynamic_node_acl) {
if (!se_tpg->se_tpg_tfo->tpg_check_demo_mode_cache(
se_tpg)) {
list_del(&se_nacl->acl_list);
se_tpg->num_node_acls--;
- spin_unlock_bh(&se_tpg->acl_node_lock);
+ spin_unlock_irqrestore(&se_tpg->acl_node_lock, flags);
core_tpg_wait_for_nacl_pr_ref(se_nacl);
core_free_device_list_for_node(se_nacl, se_tpg);
se_tpg->se_tpg_tfo->tpg_release_fabric_acl(se_tpg,
se_nacl);
- spin_lock_bh(&se_tpg->acl_node_lock);
+ spin_lock_irqsave(&se_tpg->acl_node_lock, flags);
}
}
- spin_unlock_bh(&se_tpg->acl_node_lock);
+ spin_unlock_irqrestore(&se_tpg->acl_node_lock, flags);
}
transport_free_session(se_sess);
@@ -2053,8 +2054,14 @@
cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE;
break;
}
-
- if (!sc)
+ /*
+ * If a fabric does not define a cmd->se_tfo->new_cmd_map caller,
+ * make the call to transport_send_check_condition_and_sense()
+ * directly. Otherwise expect the fabric to make the call to
+ * transport_send_check_condition_and_sense() after handling
+ * possible unsoliticied write data payloads.
+ */
+ if (!sc && !cmd->se_tfo->new_cmd_map)
transport_new_cmd_failure(cmd);
else {
ret = transport_send_check_condition_and_sense(cmd,
@@ -2847,12 +2854,42 @@
" transport_dev_end_lba(): %llu\n",
cmd->t_task_lba, sectors,
transport_dev_end_lba(dev));
- pr_err(" We should return CHECK_CONDITION"
- " but we don't yet\n");
- return 0;
+ return -EINVAL;
}
- return sectors;
+ return 0;
+}
+
+static int target_check_write_same_discard(unsigned char *flags, struct se_device *dev)
+{
+ /*
+ * Determine if the received WRITE_SAME is used to for direct
+ * passthrough into Linux/SCSI with struct request via TCM/pSCSI
+ * or we are signaling the use of internal WRITE_SAME + UNMAP=1
+ * emulation for -> Linux/BLOCK disbard with TCM/IBLOCK code.
+ */
+ int passthrough = (dev->transport->transport_type ==
+ TRANSPORT_PLUGIN_PHBA_PDEV);
+
+ if (!passthrough) {
+ if ((flags[0] & 0x04) || (flags[0] & 0x02)) {
+ pr_err("WRITE_SAME PBDATA and LBDATA"
+ " bits not supported for Block Discard"
+ " Emulation\n");
+ return -ENOSYS;
+ }
+ /*
+ * Currently for the emulated case we only accept
+ * tpws with the UNMAP=1 bit set.
+ */
+ if (!(flags[0] & 0x08)) {
+ pr_err("WRITE_SAME w/o UNMAP bit not"
+ " supported for Block Discard Emulation\n");
+ return -ENOSYS;
+ }
+ }
+
+ return 0;
}
/* transport_generic_cmd_sequencer():
@@ -3065,7 +3102,7 @@
goto out_unsupported_cdb;
if (sectors)
- size = transport_get_size(sectors, cdb, cmd);
+ size = transport_get_size(1, cdb, cmd);
else {
pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not"
" supported\n");
@@ -3075,27 +3112,9 @@
cmd->t_task_lba = get_unaligned_be64(&cdb[12]);
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
- /*
- * Skip the remaining assignments for TCM/PSCSI passthrough
- */
- if (passthrough)
- break;
+ if (target_check_write_same_discard(&cdb[10], dev) < 0)
+ goto out_invalid_cdb_field;
- if ((cdb[10] & 0x04) || (cdb[10] & 0x02)) {
- pr_err("WRITE_SAME PBDATA and LBDATA"
- " bits not supported for Block Discard"
- " Emulation\n");
- goto out_invalid_cdb_field;
- }
- /*
- * Currently for the emulated case we only accept
- * tpws with the UNMAP=1 bit set.
- */
- if (!(cdb[10] & 0x08)) {
- pr_err("WRITE_SAME w/o UNMAP bit not"
- " supported for Block Discard Emulation\n");
- goto out_invalid_cdb_field;
- }
break;
default:
pr_err("VARIABLE_LENGTH_CMD service action"
@@ -3330,10 +3349,12 @@
cmd->se_cmd_flags |= SCF_EMULATE_CDB_ASYNC;
/*
* Check to ensure that LBA + Range does not exceed past end of
- * device.
+ * device for IBLOCK and FILEIO ->do_sync_cache() backend calls
*/
- if (!transport_cmd_get_valid_sectors(cmd))
- goto out_invalid_cdb_field;
+ if ((cmd->t_task_lba != 0) || (sectors != 0)) {
+ if (transport_cmd_get_valid_sectors(cmd) < 0)
+ goto out_invalid_cdb_field;
+ }
break;
case UNMAP:
size = get_unaligned_be16(&cdb[7]);
@@ -3345,40 +3366,38 @@
goto out_unsupported_cdb;
if (sectors)
- size = transport_get_size(sectors, cdb, cmd);
+ size = transport_get_size(1, cdb, cmd);
else {
pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n");
goto out_invalid_cdb_field;
}
cmd->t_task_lba = get_unaligned_be64(&cdb[2]);
- passthrough = (dev->transport->transport_type ==
- TRANSPORT_PLUGIN_PHBA_PDEV);
- /*
- * Determine if the received WRITE_SAME_16 is used to for direct
- * passthrough into Linux/SCSI with struct request via TCM/pSCSI
- * or we are signaling the use of internal WRITE_SAME + UNMAP=1
- * emulation for -> Linux/BLOCK disbard with TCM/IBLOCK and
- * TCM/FILEIO subsystem plugin backstores.
- */
- if (!passthrough) {
- if ((cdb[1] & 0x04) || (cdb[1] & 0x02)) {
- pr_err("WRITE_SAME PBDATA and LBDATA"
- " bits not supported for Block Discard"
- " Emulation\n");
- goto out_invalid_cdb_field;
- }
- /*
- * Currently for the emulated case we only accept
- * tpws with the UNMAP=1 bit set.
- */
- if (!(cdb[1] & 0x08)) {
- pr_err("WRITE_SAME w/o UNMAP bit not "
- " supported for Block Discard Emulation\n");
- goto out_invalid_cdb_field;
- }
- }
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+
+ if (target_check_write_same_discard(&cdb[1], dev) < 0)
+ goto out_invalid_cdb_field;
+ break;
+ case WRITE_SAME:
+ sectors = transport_get_sectors_10(cdb, cmd, §or_ret);
+ if (sector_ret)
+ goto out_unsupported_cdb;
+
+ if (sectors)
+ size = transport_get_size(1, cdb, cmd);
+ else {
+ pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n");
+ goto out_invalid_cdb_field;
+ }
+
+ cmd->t_task_lba = get_unaligned_be32(&cdb[2]);
+ cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ /*
+ * Follow sbcr26 with WRITE_SAME (10) and check for the existence
+ * of byte 1 bit 3 UNMAP instead of original reserved field
+ */
+ if (target_check_write_same_discard(&cdb[1], dev) < 0)
+ goto out_invalid_cdb_field;
break;
case ALLOW_MEDIUM_REMOVAL:
case GPCMD_CLOSE_TRACK:
@@ -3873,9 +3892,7 @@
static int transport_new_cmd_obj(struct se_cmd *cmd)
{
struct se_device *dev = cmd->se_dev;
- u32 task_cdbs;
- u32 rc;
- int set_counts = 1;
+ int set_counts = 1, rc, task_cdbs;
/*
* Setup any BIDI READ tasks and memory from
@@ -3893,7 +3910,7 @@
cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
cmd->scsi_sense_reason =
TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- return PYX_TRANSPORT_LU_COMM_FAILURE;
+ return -EINVAL;
}
atomic_inc(&cmd->t_fe_count);
atomic_inc(&cmd->t_se_count);
@@ -3912,7 +3929,7 @@
cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
cmd->scsi_sense_reason =
TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- return PYX_TRANSPORT_LU_COMM_FAILURE;
+ return -EINVAL;
}
if (set_counts) {
@@ -4028,8 +4045,6 @@
if (!task->task_sg)
continue;
- BUG_ON(!task->task_padded_sg);
-
if (!sg_first) {
sg_first = task->task_sg;
chained_nents = task->task_sg_nents;
@@ -4037,9 +4052,19 @@
sg_chain(sg_prev, sg_prev_nents, task->task_sg);
chained_nents += task->task_sg_nents;
}
+ /*
+ * For the padded tasks, use the extra SGL vector allocated
+ * in transport_allocate_data_tasks() for the sg_prev_nents
+ * offset into sg_chain() above.. The last task of a
+ * multi-task list, or a single task will not have
+ * task->task_sg_padded set..
+ */
+ if (task->task_padded_sg)
+ sg_prev_nents = (task->task_sg_nents + 1);
+ else
+ sg_prev_nents = task->task_sg_nents;
sg_prev = task->task_sg;
- sg_prev_nents = task->task_sg_nents;
}
/*
* Setup the starting pointer and total t_tasks_sg_linked_no including
@@ -4091,7 +4116,7 @@
cmd_sg = sgl;
for (i = 0; i < task_count; i++) {
- unsigned int task_size;
+ unsigned int task_size, task_sg_nents_padded;
int count;
task = transport_generic_get_task(cmd, data_direction);
@@ -4110,30 +4135,33 @@
/* Update new cdb with updated lba/sectors */
cmd->transport_split_cdb(task->task_lba, task->task_sectors, cdb);
-
+ /*
+ * This now assumes that passed sg_ents are in PAGE_SIZE chunks
+ * in order to calculate the number per task SGL entries
+ */
+ task->task_sg_nents = DIV_ROUND_UP(task->task_size, PAGE_SIZE);
/*
* Check if the fabric module driver is requesting that all
* struct se_task->task_sg[] be chained together.. If so,
* then allocate an extra padding SG entry for linking and
- * marking the end of the chained SGL.
- * Possibly over-allocate task sgl size by using cmd sgl size.
- * It's so much easier and only a waste when task_count > 1.
- * That is extremely rare.
+ * marking the end of the chained SGL for every task except
+ * the last one for (task_count > 1) operation, or skipping
+ * the extra padding for the (task_count == 1) case.
*/
- task->task_sg_nents = sgl_nents;
- if (cmd->se_tfo->task_sg_chaining) {
- task->task_sg_nents++;
+ if (cmd->se_tfo->task_sg_chaining && (i < (task_count - 1))) {
+ task_sg_nents_padded = (task->task_sg_nents + 1);
task->task_padded_sg = 1;
- }
+ } else
+ task_sg_nents_padded = task->task_sg_nents;
task->task_sg = kmalloc(sizeof(struct scatterlist) *
- task->task_sg_nents, GFP_KERNEL);
+ task_sg_nents_padded, GFP_KERNEL);
if (!task->task_sg) {
cmd->se_dev->transport->free_task(task);
return -ENOMEM;
}
- sg_init_table(task->task_sg, task->task_sg_nents);
+ sg_init_table(task->task_sg, task_sg_nents_padded);
task_size = task->task_size;
@@ -4230,10 +4258,13 @@
struct scatterlist *sgl,
unsigned int sgl_nents)
{
- if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)
+ if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) {
+ if (transport_cmd_get_valid_sectors(cmd) < 0)
+ return -EINVAL;
+
return transport_allocate_data_tasks(cmd, lba, data_direction,
sgl, sgl_nents);
- else
+ } else
return transport_allocate_control_task(cmd);
}
@@ -4726,6 +4757,13 @@
*/
switch (reason) {
case TCM_NON_EXISTENT_LUN:
+ /* CURRENT ERROR */
+ buffer[offset] = 0x70;
+ /* ILLEGAL REQUEST */
+ buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
+ /* LOGICAL UNIT NOT SUPPORTED */
+ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x25;
+ break;
case TCM_UNSUPPORTED_SCSI_OPCODE:
case TCM_SECTOR_COUNT_TOO_MANY:
/* CURRENT ERROR */
diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c
index 8781d1e..b15879d 100644
--- a/drivers/target/tcm_fc/tfc_conf.c
+++ b/drivers/target/tcm_fc/tfc_conf.c
@@ -256,7 +256,7 @@
struct se_portal_group *se_tpg = &tpg->se_tpg;
struct se_node_acl *se_acl;
- spin_lock_bh(&se_tpg->acl_node_lock);
+ spin_lock_irq(&se_tpg->acl_node_lock);
list_for_each_entry(se_acl, &se_tpg->acl_node_list, acl_list) {
acl = container_of(se_acl, struct ft_node_acl, se_node_acl);
pr_debug("acl %p port_name %llx\n",
@@ -270,7 +270,7 @@
break;
}
}
- spin_unlock_bh(&se_tpg->acl_node_lock);
+ spin_unlock_irq(&se_tpg->acl_node_lock);
return found;
}
@@ -655,9 +655,7 @@
synchronize_rcu();
}
-#ifdef MODULE
MODULE_DESCRIPTION("FC TCM fabric driver " FT_VERSION);
MODULE_LICENSE("GPL");
module_init(ft_init);
module_exit(ft_exit);
-#endif /* MODULE */
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 98b6e3b..e809e9d 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -446,8 +446,19 @@
int pty_limit = NR_UNIX98_PTY_DEFAULT;
static int pty_limit_min;
static int pty_limit_max = NR_UNIX98_PTY_MAX;
+static int tty_count;
static int pty_count;
+static inline void pty_inc_count(void)
+{
+ pty_count = (++tty_count) / 2;
+}
+
+static inline void pty_dec_count(void)
+{
+ pty_count = (--tty_count) / 2;
+}
+
static struct cdev ptmx_cdev;
static struct ctl_table pty_table[] = {
@@ -542,6 +553,7 @@
static void pty_unix98_shutdown(struct tty_struct *tty)
{
+ tty_driver_remove_tty(tty->driver, tty);
/* We have our own method as we don't use the tty index */
kfree(tty->termios);
}
@@ -588,7 +600,8 @@
*/
tty_driver_kref_get(driver);
tty->count++;
- pty_count++;
+ pty_inc_count(); /* tty */
+ pty_inc_count(); /* tty->link */
return 0;
err_free_mem:
deinitialize_tty_struct(o_tty);
@@ -602,7 +615,7 @@
static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
{
- pty_count--;
+ pty_dec_count();
}
static const struct tty_operations ptm_unix98_ops = {
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index f2dfec8..7f50999 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -1819,6 +1819,8 @@
unsigned int iir, ier = 0, lsr;
unsigned long flags;
+ spin_lock_irqsave(&up->port.lock, flags);
+
/*
* Must disable interrupts or else we risk racing with the interrupt
* based handler.
@@ -1836,10 +1838,8 @@
* the "Diva" UART used on the management processor on many HP
* ia64 and parisc boxes.
*/
- spin_lock_irqsave(&up->port.lock, flags);
lsr = serial_in(up, UART_LSR);
up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- spin_unlock_irqrestore(&up->port.lock, flags);
if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
(!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
(lsr & UART_LSR_THRE)) {
@@ -1848,11 +1848,13 @@
}
if (!(iir & UART_IIR_NO_INT))
- serial8250_handle_port(up);
+ transmit_chars(up);
if (is_real_interrupt(up->port.irq))
serial_out(up, UART_IER, ier);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
/* Standard timer interval plus 0.2s to keep the port running */
mod_timer(&up->timer,
jiffies + uart_poll_timeout(&up->port) + HZ / 5);
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 6b887d9..3abeca2 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -1599,11 +1599,6 @@
.device = 0x800D,
.init = pci_eg20t_init,
},
- {
- .vendor = 0x10DB,
- .device = 0x800D,
- .init = pci_eg20t_init,
- },
/*
* Cronyx Omega PCI (PLX-chip based)
*/
@@ -4021,7 +4016,7 @@
0, 0, pbn_NETMOS9900_2s_115200 },
/*
- * Best Connectivity PCI Multi I/O cards
+ * Best Connectivity and Rosewill PCI Multi I/O cards
*/
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
@@ -4029,6 +4024,10 @@
0, 0, pbn_b0_1_115200 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+ 0xA000, 0x3002,
+ 0, 0, pbn_b0_bt_2_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
0xA000, 0x3004,
0, 0, pbn_b0_bt_4_115200 },
/* Intel CE4100 */
diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250_pnp.c
index fc301f6..a2f2365 100644
--- a/drivers/tty/serial/8250_pnp.c
+++ b/drivers/tty/serial/8250_pnp.c
@@ -109,6 +109,9 @@
/* IBM */
/* IBM Thinkpad 701 Internal Modem Voice */
{ "IBM0033", 0 },
+ /* Intermec */
+ /* Intermec CV60 touchscreen port */
+ { "PNP4972", 0 },
/* Intertex */
/* Intertex 28k8 33k6 Voice EXT PnP */
{ "IXDC801", 0 },
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index af9b781..b922f5d 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1609,9 +1609,11 @@
static int __init atmel_console_init(void)
{
if (atmel_default_console_device) {
- add_preferred_console(ATMEL_DEVICENAME,
- atmel_default_console_device->id, NULL);
- atmel_init_port(&atmel_ports[atmel_default_console_device->id],
+ struct atmel_uart_data *pdata =
+ atmel_default_console_device->dev.platform_data;
+
+ add_preferred_console(ATMEL_DEVICENAME, pdata->num, NULL);
+ atmel_init_port(&atmel_ports[pdata->num],
atmel_default_console_device);
register_console(&atmel_console);
}
diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c
index a1fe304..d73aadd 100644
--- a/drivers/tty/serial/max3107-aava.c
+++ b/drivers/tty/serial/max3107-aava.c
@@ -340,5 +340,5 @@
MODULE_DESCRIPTION("MAX3107 driver");
MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("aava-max3107-spi");
+MODULE_ALIAS("spi:aava-max3107");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index 750b4f6..a816460 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -1209,5 +1209,5 @@
MODULE_DESCRIPTION("MAX3107 driver");
MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("max3107-spi");
+MODULE_ALIAS("spi:max3107");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index a764bf9..23bc743 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -917,4 +917,4 @@
module_exit(serial_m3110_exit);
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("max3110-uart");
+MODULE_ALIAS("spi:max3110-uart");
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index c37df8d..5e713d3 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -806,8 +806,7 @@
serial_omap_set_mctrl(&up->port, up->port.mctrl);
/* Software Flow Control Configuration */
- if (termios->c_iflag & (IXON | IXOFF))
- serial_omap_configure_xonxoff(up, termios);
+ serial_omap_configure_xonxoff(up, termios);
spin_unlock_irqrestore(&up->port.lock, flags);
dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 846dfcd..b46218d 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -598,7 +598,8 @@
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev
+ dma_dev = pci_get_bus_and_slot(priv->pdev->bus->number,
+ PCI_DEVFN(0xa, 0)); /* Get DMA's dev
information */
/* Set Tx DMA */
param = &priv->param_tx;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index afc6294..6edafb5 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1225,15 +1225,19 @@
.suspend = s3c24xx_serial_suspend,
.resume = s3c24xx_serial_resume,
};
+#define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops)
+
#else /* !CONFIG_PM_SLEEP */
-#define s3c24xx_serial_pm_ops NULL
+
+#define SERIAL_SAMSUNG_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP */
int s3c24xx_serial_init(struct platform_driver *drv,
struct s3c24xx_uart_info *info)
{
dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
- drv->driver.pm = &s3c24xx_serial_pm_ops;
+
+ drv->driver.pm = SERIAL_SAMSUNG_PM_OPS;
return platform_driver_register(drv);
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index db7912c..a3efbea 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -200,6 +200,11 @@
clear_bit(TTY_IO_ERROR, &tty->flags);
}
+ /*
+ * This is to allow setserial on this port. People may want to set
+ * port/irq/type and then reconfigure the port properly if it failed
+ * now.
+ */
if (retval && capable(CAP_SYS_ADMIN))
retval = 0;
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index c327218..9af9f08 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -235,7 +235,7 @@
return qe_port->bd_virt + (addr - qe_port->bd_dma_addr);
/* something nasty happened */
- printk(KERN_ERR "%s: addr=%x\n", __func__, addr);
+ printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr);
BUG();
return NULL;
}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 150e4f7..4f1fc81 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1295,8 +1295,7 @@
*
* Locking: tty_mutex for now
*/
-static void tty_driver_remove_tty(struct tty_driver *driver,
- struct tty_struct *tty)
+void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty)
{
if (driver->ops->remove)
driver->ops->remove(driver, tty);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 8669ba3..73cbbd8 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1775,6 +1775,8 @@
struct usb_interface *iface = usb_ifnum_to_if(udev,
cur_alt->desc.bInterfaceNumber);
+ if (!iface)
+ return -EINVAL;
if (iface->resetting_device) {
/*
* The USB core just reset the device, so the xHCI host
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 8f8d3f6..8f3eab1 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -434,6 +434,7 @@
config_ep_by_speed(gadget, f, fp->out_ep)) {
fp->in_ep->desc = NULL;
fp->out_ep->desc = NULL;
+ spin_unlock(&port->lock);
return -EINVAL;
}
usb_ep_enable(fp->out_ep);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index e051b30..4c32cb1 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -343,7 +343,7 @@
u32 temp;
u32 power_okay;
int i;
- u8 resume_needed = 0;
+ unsigned long resume_needed = 0;
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
@@ -416,7 +416,7 @@
if (test_bit(i, &ehci->bus_suspended) &&
(temp & PORT_SUSPEND)) {
temp |= PORT_RESUME;
- resume_needed = 1;
+ set_bit(i, &resume_needed);
}
ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
}
@@ -431,8 +431,7 @@
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
- if (test_bit(i, &ehci->bus_suspended) &&
- (temp & PORT_SUSPEND)) {
+ if (test_bit(i, &resume_needed)) {
temp &= ~(PORT_RWC_BITS | PORT_RESUME);
ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
ehci_vdbg (ehci, "resumed port %d\n", i + 1);
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index b3958b3..9e77f1c 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -86,6 +86,7 @@
goto fail_hcd;
}
+ s5p_ehci->hcd = hcd;
s5p_ehci->clk = clk_get(&pdev->dev, "usbhost");
if (IS_ERR(s5p_ehci->clk)) {
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 0be788c..1e96d1f 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -463,11 +463,12 @@
&& (temp & PORT_POWER))
status |= USB_PORT_STAT_SUSPEND;
}
- if ((temp & PORT_PLS_MASK) == XDEV_RESUME) {
+ if ((temp & PORT_PLS_MASK) == XDEV_RESUME &&
+ !DEV_SUPERSPEED(temp)) {
if ((temp & PORT_RESET) || !(temp & PORT_PE))
goto error;
- if (!DEV_SUPERSPEED(temp) && time_after_eq(jiffies,
- bus_state->resume_done[wIndex])) {
+ if (time_after_eq(jiffies,
+ bus_state->resume_done[wIndex])) {
xhci_dbg(xhci, "Resume USB2 port %d\n",
wIndex + 1);
bus_state->resume_done[wIndex] = 0;
@@ -487,6 +488,14 @@
xhci_ring_device(xhci, slot_id);
bus_state->port_c_suspend |= 1 << wIndex;
bus_state->suspended_ports &= ~(1 << wIndex);
+ } else {
+ /*
+ * The resume has been signaling for less than
+ * 20ms. Report the port status as SUSPEND,
+ * let the usbcore check port status again
+ * and clear resume signaling later.
+ */
+ status |= USB_PORT_STAT_SUSPEND;
}
}
if ((temp & PORT_PLS_MASK) == XDEV_U0
@@ -664,7 +673,7 @@
xhci_dbg(xhci, "PORTSC %04x\n", temp);
if (temp & PORT_RESET)
goto error;
- if (temp & XDEV_U3) {
+ if ((temp & PORT_PLS_MASK) == XDEV_U3) {
if ((temp & PORT_PE) == 0)
goto error;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 7113d16..54139a2 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -514,8 +514,12 @@
(unsigned long long) addr);
}
+/* flip_cycle means flip the cycle bit of all but the first and last TRB.
+ * (The last TRB actually points to the ring enqueue pointer, which is not part
+ * of this TD.) This is used to remove partially enqueued isoc TDs from a ring.
+ */
static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
- struct xhci_td *cur_td)
+ struct xhci_td *cur_td, bool flip_cycle)
{
struct xhci_segment *cur_seg;
union xhci_trb *cur_trb;
@@ -528,6 +532,12 @@
* leave the pointers intact.
*/
cur_trb->generic.field[3] &= cpu_to_le32(~TRB_CHAIN);
+ /* Flip the cycle bit (link TRBs can't be the first
+ * or last TRB).
+ */
+ if (flip_cycle)
+ cur_trb->generic.field[3] ^=
+ cpu_to_le32(TRB_CYCLE);
xhci_dbg(xhci, "Cancel (unchain) link TRB\n");
xhci_dbg(xhci, "Address = %p (0x%llx dma); "
"in seg %p (0x%llx dma)\n",
@@ -541,6 +551,11 @@
cur_trb->generic.field[2] = 0;
/* Preserve only the cycle bit of this TRB */
cur_trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
+ /* Flip the cycle bit except on the first or last TRB */
+ if (flip_cycle && cur_trb != cur_td->first_trb &&
+ cur_trb != cur_td->last_trb)
+ cur_trb->generic.field[3] ^=
+ cpu_to_le32(TRB_CYCLE);
cur_trb->generic.field[3] |= cpu_to_le32(
TRB_TYPE(TRB_TR_NOOP));
xhci_dbg(xhci, "Cancel TRB %p (0x%llx dma) "
@@ -719,14 +734,14 @@
cur_td->urb->stream_id,
cur_td, &deq_state);
else
- td_to_noop(xhci, ep_ring, cur_td);
+ td_to_noop(xhci, ep_ring, cur_td, false);
remove_finished_td:
/*
* The event handler won't see a completion for this TD anymore,
* so remove it from the endpoint ring's TD list. Keep it in
* the cancelled TD list for URB completion later.
*/
- list_del(&cur_td->td_list);
+ list_del_init(&cur_td->td_list);
}
last_unlinked_td = cur_td;
xhci_stop_watchdog_timer_in_irq(xhci, ep);
@@ -754,7 +769,7 @@
do {
cur_td = list_entry(ep->cancelled_td_list.next,
struct xhci_td, cancelled_td_list);
- list_del(&cur_td->cancelled_td_list);
+ list_del_init(&cur_td->cancelled_td_list);
/* Clean up the cancelled URB */
/* Doesn't matter what we pass for status, since the core will
@@ -862,9 +877,9 @@
cur_td = list_first_entry(&ring->td_list,
struct xhci_td,
td_list);
- list_del(&cur_td->td_list);
+ list_del_init(&cur_td->td_list);
if (!list_empty(&cur_td->cancelled_td_list))
- list_del(&cur_td->cancelled_td_list);
+ list_del_init(&cur_td->cancelled_td_list);
xhci_giveback_urb_in_irq(xhci, cur_td,
-ESHUTDOWN, "killed");
}
@@ -873,7 +888,7 @@
&temp_ep->cancelled_td_list,
struct xhci_td,
cancelled_td_list);
- list_del(&cur_td->cancelled_td_list);
+ list_del_init(&cur_td->cancelled_td_list);
xhci_giveback_urb_in_irq(xhci, cur_td,
-ESHUTDOWN, "killed");
}
@@ -1565,10 +1580,10 @@
else
*status = 0;
}
- list_del(&td->td_list);
+ list_del_init(&td->td_list);
/* Was this TD slated to be cancelled but completed anyway? */
if (!list_empty(&td->cancelled_td_list))
- list_del(&td->cancelled_td_list);
+ list_del_init(&td->cancelled_td_list);
urb_priv->td_cnt++;
/* Giveback the urb when all the tds are completed */
@@ -2500,11 +2515,8 @@
if (td_index == 0) {
ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb);
- if (unlikely(ret)) {
- xhci_urb_free_priv(xhci, urb_priv);
- urb->hcpriv = NULL;
+ if (unlikely(ret))
return ret;
- }
}
td->urb = urb;
@@ -2672,6 +2684,10 @@
{
int packets_transferred;
+ /* One TRB with a zero-length data packet. */
+ if (running_total == 0 && trb_buff_len == 0)
+ return 0;
+
/* All the TRB queueing functions don't count the current TRB in
* running_total.
*/
@@ -3113,21 +3129,16 @@
struct urb *urb, int i)
{
int num_trbs = 0;
- u64 addr, td_len, running_total;
+ u64 addr, td_len;
addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
td_len = urb->iso_frame_desc[i].length;
- running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
- running_total &= TRB_MAX_BUFF_SIZE - 1;
- if (running_total != 0)
+ num_trbs = DIV_ROUND_UP(td_len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
+ TRB_MAX_BUFF_SIZE);
+ if (num_trbs == 0)
num_trbs++;
- while (running_total < td_len) {
- num_trbs++;
- running_total += TRB_MAX_BUFF_SIZE;
- }
-
return num_trbs;
}
@@ -3226,6 +3237,7 @@
start_trb = &ep_ring->enqueue->generic;
start_cycle = ep_ring->cycle_state;
+ urb_priv = urb->hcpriv;
/* Queue the first TRB, even if it's zero-length */
for (i = 0; i < num_tds; i++) {
unsigned int total_packet_count;
@@ -3237,9 +3249,11 @@
addr = start_addr + urb->iso_frame_desc[i].offset;
td_len = urb->iso_frame_desc[i].length;
td_remain_len = td_len;
- /* FIXME: Ignoring zero-length packets, can those happen? */
total_packet_count = roundup(td_len,
le16_to_cpu(urb->ep->desc.wMaxPacketSize));
+ /* A zero-length transfer still involves at least one packet. */
+ if (total_packet_count == 0)
+ total_packet_count++;
burst_count = xhci_get_burst_count(xhci, urb->dev, urb,
total_packet_count);
residue = xhci_get_last_burst_packet_count(xhci,
@@ -3249,12 +3263,13 @@
ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
urb->stream_id, trbs_per_td, urb, i, mem_flags);
- if (ret < 0)
- return ret;
+ if (ret < 0) {
+ if (i == 0)
+ return ret;
+ goto cleanup;
+ }
- urb_priv = urb->hcpriv;
td = urb_priv->td[i];
-
for (j = 0; j < trbs_per_td; j++) {
u32 remainder = 0;
field = TRB_TBC(burst_count) | TRB_TLBPC(residue);
@@ -3344,6 +3359,27 @@
giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
start_cycle, start_trb);
return 0;
+cleanup:
+ /* Clean up a partially enqueued isoc transfer. */
+
+ for (i--; i >= 0; i--)
+ list_del_init(&urb_priv->td[i]->td_list);
+
+ /* Use the first TD as a temporary variable to turn the TDs we've queued
+ * into No-ops with a software-owned cycle bit. That way the hardware
+ * won't accidentally start executing bogus TDs when we partially
+ * overwrite them. td->first_trb and td->start_seg are already set.
+ */
+ urb_priv->td[0]->last_trb = ep_ring->enqueue;
+ /* Every TRB except the first & last will have its cycle bit flipped. */
+ td_to_noop(xhci, ep_ring, urb_priv->td[0], true);
+
+ /* Reset the ring enqueue back to the first TRB and its cycle bit. */
+ ep_ring->enqueue = urb_priv->td[0]->first_trb;
+ ep_ring->enq_seg = urb_priv->td[0]->start_seg;
+ ep_ring->cycle_state = start_cycle;
+ usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
+ return ret;
}
/*
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1c4432d..3a0f695 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1085,8 +1085,11 @@
if (urb->dev->speed == USB_SPEED_FULL) {
ret = xhci_check_maxpacket(xhci, slot_id,
ep_index, urb);
- if (ret < 0)
+ if (ret < 0) {
+ xhci_urb_free_priv(xhci, urb_priv);
+ urb->hcpriv = NULL;
return ret;
+ }
}
/* We have a spinlock and interrupts disabled, so we must pass
@@ -1097,6 +1100,8 @@
goto dying;
ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
+ if (ret)
+ goto free_priv;
spin_unlock_irqrestore(&xhci->lock, flags);
} else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) {
spin_lock_irqsave(&xhci->lock, flags);
@@ -1117,6 +1122,8 @@
ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
}
+ if (ret)
+ goto free_priv;
spin_unlock_irqrestore(&xhci->lock, flags);
} else if (usb_endpoint_xfer_int(&urb->ep->desc)) {
spin_lock_irqsave(&xhci->lock, flags);
@@ -1124,6 +1131,8 @@
goto dying;
ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
+ if (ret)
+ goto free_priv;
spin_unlock_irqrestore(&xhci->lock, flags);
} else {
spin_lock_irqsave(&xhci->lock, flags);
@@ -1131,18 +1140,22 @@
goto dying;
ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
+ if (ret)
+ goto free_priv;
spin_unlock_irqrestore(&xhci->lock, flags);
}
exit:
return ret;
dying:
- xhci_urb_free_priv(xhci, urb_priv);
- urb->hcpriv = NULL;
xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for "
"non-responsive xHCI host.\n",
urb->ep->desc.bEndpointAddress, urb);
+ ret = -ESHUTDOWN;
+free_priv:
+ xhci_urb_free_priv(xhci, urb_priv);
+ urb->hcpriv = NULL;
spin_unlock_irqrestore(&xhci->lock, flags);
- return -ESHUTDOWN;
+ return ret;
}
/* Get the right ring for the given URB.
@@ -1239,6 +1252,13 @@
if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) {
xhci_dbg(xhci, "HW died, freeing TD.\n");
urb_priv = urb->hcpriv;
+ for (i = urb_priv->td_cnt; i < urb_priv->length; i++) {
+ td = urb_priv->td[i];
+ if (!list_empty(&td->td_list))
+ list_del_init(&td->td_list);
+ if (!list_empty(&td->cancelled_td_list))
+ list_del_init(&td->cancelled_td_list);
+ }
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock_irqrestore(&xhci->lock, flags);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index ae8c396..5e7cfba 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/prefetch.h>
#include <asm/cacheflush.h>
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 149f3f3..318fb4e 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -226,8 +226,10 @@
struct cppi *controller;
void __iomem *tibase;
int i;
+ struct musb *musb;
controller = container_of(c, struct cppi, controller);
+ musb = controller->musb;
tibase = controller->tibase;
/* DISABLE INDIVIDUAL CHANNEL Interrupts */
@@ -289,9 +291,11 @@
u8 index;
struct cppi_channel *cppi_ch;
void __iomem *tibase;
+ struct musb *musb;
controller = container_of(c, struct cppi, controller);
tibase = controller->tibase;
+ musb = controller->musb;
/* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */
index = ep->epnum - 1;
@@ -339,7 +343,8 @@
c = container_of(channel, struct cppi_channel, channel);
tibase = c->controller->tibase;
if (!c->hw_ep)
- dev_dbg(musb->controller, "releasing idle DMA channel %p\n", c);
+ dev_dbg(c->controller->musb->controller,
+ "releasing idle DMA channel %p\n", c);
else if (!c->transmit)
core_rxirq_enable(tibase, c->index + 1);
@@ -357,10 +362,11 @@
musb_ep_select(base, c->index + 1);
- DBG(level, "RX DMA%d%s: %d left, csr %04x, "
- "%08x H%08x S%08x C%08x, "
- "B%08x L%08x %08x .. %08x"
- "\n",
+ dev_dbg(c->controller->musb->controller,
+ "RX DMA%d%s: %d left, csr %04x, "
+ "%08x H%08x S%08x C%08x, "
+ "B%08x L%08x %08x .. %08x"
+ "\n",
c->index, tag,
musb_readl(c->controller->tibase,
DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index),
@@ -387,10 +393,11 @@
musb_ep_select(base, c->index + 1);
- DBG(level, "TX DMA%d%s: csr %04x, "
- "H%08x S%08x C%08x %08x, "
- "F%08x L%08x .. %08x"
- "\n",
+ dev_dbg(c->controller->musb->controller,
+ "TX DMA%d%s: csr %04x, "
+ "H%08x S%08x C%08x %08x, "
+ "F%08x L%08x .. %08x"
+ "\n",
c->index, tag,
musb_readw(c->hw_ep->regs, MUSB_TXCSR),
@@ -1022,6 +1029,7 @@
int i;
dma_addr_t safe2ack;
void __iomem *regs = rx->hw_ep->regs;
+ struct musb *musb = cppi->musb;
cppi_dump_rx(6, rx, "/K");
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 668eeef..b3c065ab 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -172,7 +172,8 @@
#endif
/* TUSB mapping: "flat" plus ep0 special cases */
-#if defined(CONFIG_USB_MUSB_TUSB6010)
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
#define musb_ep_select(_mbase, _epnum) \
musb_writeb((_mbase), MUSB_INDEX, (_epnum))
#define MUSB_EP_OFFSET MUSB_TUSB_OFFSET
@@ -241,7 +242,8 @@
void __iomem *fifo;
void __iomem *regs;
-#ifdef CONFIG_USB_MUSB_TUSB6010
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
void __iomem *conf;
#endif
@@ -258,7 +260,8 @@
struct dma_channel *tx_channel;
struct dma_channel *rx_channel;
-#ifdef CONFIG_USB_MUSB_TUSB6010
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
/* TUSB has "asynchronous" and "synchronous" dma modes */
dma_addr_t fifo_async;
dma_addr_t fifo_sync;
@@ -356,7 +359,8 @@
void __iomem *ctrl_base;
void __iomem *mregs;
-#ifdef CONFIG_USB_MUSB_TUSB6010
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
dma_addr_t async;
dma_addr_t sync;
void __iomem *sync_va;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 8c41a2e..e818203 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1856,6 +1856,7 @@
return 0;
err:
+ musb->g.dev.parent = NULL;
device_unregister(&musb->g.dev);
return status;
}
@@ -1863,7 +1864,8 @@
void musb_gadget_cleanup(struct musb *musb)
{
usb_del_gadget_udc(&musb->g);
- device_unregister(&musb->g.dev);
+ if (musb->g.dev.parent)
+ device_unregister(&musb->g.dev);
}
/*
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 8241070..03f2655 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -234,7 +234,8 @@
#define MUSB_TESTMODE 0x0F /* 8 bit */
/* Get offset for a given FIFO from musb->mregs */
-#ifdef CONFIG_USB_MUSB_TUSB6010
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
#define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20))
#else
#define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4))
@@ -295,7 +296,8 @@
#define MUSB_FLAT_OFFSET(_epnum, _offset) \
(0x100 + (0x10*(_epnum)) + (_offset))
-#ifdef CONFIG_USB_MUSB_TUSB6010
+#if defined(CONFIG_USB_MUSB_TUSB6010) || \
+ defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
/* TUSB6010 EP0 configuration register is special */
#define MUSB_TUSB_OFFSET(_epnum, _offset) \
(0x10 + _offset)
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 9eec41f..ec14801 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/prefetch.h>
#include <linux/usb.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 07c8a73..b67b4bc 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -20,6 +20,7 @@
#include <plat/mux.h>
#include "musb_core.h"
+#include "tusb6010.h"
#define to_chdat(c) ((struct tusb_omap_dma_ch *)(c)->private_data)
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index cecace4..ef4333f 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -65,7 +65,8 @@
struct musb *musb = hw_ep->musb;
unsigned long flags;
- DBG(4, "DMA tx transfer done on hw_ep=%d\n", hw_ep->epnum);
+ dev_dbg(musb->controller, "DMA tx transfer done on hw_ep=%d\n",
+ hw_ep->epnum);
spin_lock_irqsave(&musb->lock, flags);
ux500_channel->channel.actual_len = ux500_channel->cur_len;
@@ -84,7 +85,8 @@
struct musb *musb = hw_ep->musb;
unsigned long flags;
- DBG(4, "DMA rx transfer done on hw_ep=%d\n", hw_ep->epnum);
+ dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n",
+ hw_ep->epnum);
spin_lock_irqsave(&musb->lock, flags);
ux500_channel->channel.actual_len = ux500_channel->cur_len;
@@ -116,9 +118,11 @@
enum dma_slave_buswidth addr_width;
dma_addr_t usb_fifo_addr = (MUSB_FIFO_OFFSET(hw_ep->epnum) +
ux500_channel->controller->phy_base);
+ struct musb *musb = ux500_channel->controller->private_data;
- DBG(4, "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n",
- packet_sz, mode, dma_addr, len, ux500_channel->is_tx);
+ dev_dbg(musb->controller,
+ "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n",
+ packet_sz, mode, dma_addr, len, ux500_channel->is_tx);
ux500_channel->cur_len = len;
@@ -133,15 +137,13 @@
DMA_SLAVE_BUSWIDTH_4_BYTES;
slave_conf.direction = direction;
- if (direction == DMA_FROM_DEVICE) {
- slave_conf.src_addr = usb_fifo_addr;
- slave_conf.src_addr_width = addr_width;
- slave_conf.src_maxburst = 16;
- } else {
- slave_conf.dst_addr = usb_fifo_addr;
- slave_conf.dst_addr_width = addr_width;
- slave_conf.dst_maxburst = 16;
- }
+ slave_conf.src_addr = usb_fifo_addr;
+ slave_conf.src_addr_width = addr_width;
+ slave_conf.src_maxburst = 16;
+ slave_conf.dst_addr = usb_fifo_addr;
+ slave_conf.dst_addr_width = addr_width;
+ slave_conf.dst_maxburst = 16;
+
dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG,
(unsigned long) &slave_conf);
@@ -166,6 +168,7 @@
struct ux500_dma_controller *controller = container_of(c,
struct ux500_dma_controller, controller);
struct ux500_dma_channel *ux500_channel = NULL;
+ struct musb *musb = controller->private_data;
u8 ch_num = hw_ep->epnum - 1;
u32 max_ch;
@@ -192,7 +195,7 @@
ux500_channel->hw_ep = hw_ep;
ux500_channel->is_allocated = 1;
- DBG(7, "hw_ep=%d, is_tx=0x%x, channel=%d\n",
+ dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n",
hw_ep->epnum, is_tx, ch_num);
return &(ux500_channel->channel);
@@ -201,8 +204,9 @@
static void ux500_dma_channel_release(struct dma_channel *channel)
{
struct ux500_dma_channel *ux500_channel = channel->private_data;
+ struct musb *musb = ux500_channel->controller->private_data;
- DBG(7, "channel=%d\n", ux500_channel->ch_num);
+ dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num);
if (ux500_channel->is_allocated) {
ux500_channel->is_allocated = 0;
@@ -252,8 +256,8 @@
void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs;
u16 csr;
- DBG(4, "channel=%d, is_tx=%d\n", ux500_channel->ch_num,
- ux500_channel->is_tx);
+ dev_dbg(musb->controller, "channel=%d, is_tx=%d\n",
+ ux500_channel->ch_num, ux500_channel->is_tx);
if (channel->status == MUSB_DMA_STATUS_BUSY) {
if (ux500_channel->is_tx) {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 78a2cf9..5fc13e717 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -101,6 +101,7 @@
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
static int ftdi_NDI_device_setup(struct usb_serial *serial);
static int ftdi_stmclite_probe(struct usb_serial *serial);
+static int ftdi_8u2232c_probe(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
@@ -128,6 +129,10 @@
.probe = ftdi_stmclite_probe,
};
+static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
+ .probe = ftdi_8u2232c_probe,
+};
+
/*
* The 8U232AM has the same API as the sio except for:
* - it can support MUCH higher baudrates; up to:
@@ -178,7 +183,8 @@
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
- { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) ,
+ .driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
@@ -1737,6 +1743,18 @@
return 0;
}
+static int ftdi_8u2232c_probe(struct usb_serial *serial)
+{
+ struct usb_device *udev = serial->dev;
+
+ dbg("%s", __func__);
+
+ if (strcmp(udev->manufacturer, "CALAO Systems") == 0)
+ return ftdi_jtag_probe(serial);
+
+ return 0;
+}
+
/*
* First and second port on STMCLiteadaptors is reserved for JTAG interface
* and the forth port for pio
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 8156561..fe22e90 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -148,6 +148,8 @@
#define HUAWEI_PRODUCT_K4505 0x1464
#define HUAWEI_PRODUCT_K3765 0x1465
#define HUAWEI_PRODUCT_E14AC 0x14AC
+#define HUAWEI_PRODUCT_K3806 0x14AE
+#define HUAWEI_PRODUCT_K4605 0x14C6
#define HUAWEI_PRODUCT_K3770 0x14C9
#define HUAWEI_PRODUCT_K3771 0x14CA
#define HUAWEI_PRODUCT_K4510 0x14CB
@@ -416,6 +418,56 @@
#define SAMSUNG_VENDOR_ID 0x04e8
#define SAMSUNG_PRODUCT_GT_B3730 0x6889
+/* YUGA products www.yuga-info.com*/
+#define YUGA_VENDOR_ID 0x257A
+#define YUGA_PRODUCT_CEM600 0x1601
+#define YUGA_PRODUCT_CEM610 0x1602
+#define YUGA_PRODUCT_CEM500 0x1603
+#define YUGA_PRODUCT_CEM510 0x1604
+#define YUGA_PRODUCT_CEM800 0x1605
+#define YUGA_PRODUCT_CEM900 0x1606
+
+#define YUGA_PRODUCT_CEU818 0x1607
+#define YUGA_PRODUCT_CEU816 0x1608
+#define YUGA_PRODUCT_CEU828 0x1609
+#define YUGA_PRODUCT_CEU826 0x160A
+#define YUGA_PRODUCT_CEU518 0x160B
+#define YUGA_PRODUCT_CEU516 0x160C
+#define YUGA_PRODUCT_CEU528 0x160D
+#define YUGA_PRODUCT_CEU526 0x160F
+
+#define YUGA_PRODUCT_CWM600 0x2601
+#define YUGA_PRODUCT_CWM610 0x2602
+#define YUGA_PRODUCT_CWM500 0x2603
+#define YUGA_PRODUCT_CWM510 0x2604
+#define YUGA_PRODUCT_CWM800 0x2605
+#define YUGA_PRODUCT_CWM900 0x2606
+
+#define YUGA_PRODUCT_CWU718 0x2607
+#define YUGA_PRODUCT_CWU716 0x2608
+#define YUGA_PRODUCT_CWU728 0x2609
+#define YUGA_PRODUCT_CWU726 0x260A
+#define YUGA_PRODUCT_CWU518 0x260B
+#define YUGA_PRODUCT_CWU516 0x260C
+#define YUGA_PRODUCT_CWU528 0x260D
+#define YUGA_PRODUCT_CWU526 0x260F
+
+#define YUGA_PRODUCT_CLM600 0x2601
+#define YUGA_PRODUCT_CLM610 0x2602
+#define YUGA_PRODUCT_CLM500 0x2603
+#define YUGA_PRODUCT_CLM510 0x2604
+#define YUGA_PRODUCT_CLM800 0x2605
+#define YUGA_PRODUCT_CLM900 0x2606
+
+#define YUGA_PRODUCT_CLU718 0x2607
+#define YUGA_PRODUCT_CLU716 0x2608
+#define YUGA_PRODUCT_CLU728 0x2609
+#define YUGA_PRODUCT_CLU726 0x260A
+#define YUGA_PRODUCT_CLU518 0x260B
+#define YUGA_PRODUCT_CLU516 0x260C
+#define YUGA_PRODUCT_CLU528 0x260D
+#define YUGA_PRODUCT_CLU526 0x260F
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@@ -551,6 +603,8 @@
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },
@@ -1005,6 +1059,48 @@
{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM500) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM510) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM800) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM900) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU818) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU816) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU828) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU826) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU518) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU516) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU528) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU526) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM600) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM610) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM500) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM510) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM800) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM900) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU718) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU716) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU728) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU726) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU518) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU516) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU528) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU526) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM600) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM610) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM500) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM510) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM800) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM900) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU718) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU716) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU728) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU726) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU518) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
@@ -1134,11 +1230,13 @@
serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
return -ENODEV;
- /* Don't bind network interfaces on Huawei K3765 & K4505 */
+ /* Don't bind network interfaces on Huawei K3765, K4505 & K4605 */
if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID &&
(serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 ||
- serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) &&
- serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
+ serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505 ||
+ serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4605) &&
+ (serial->interface->cur_altsetting->desc.bInterfaceNumber == 1 ||
+ serial->interface->cur_altsetting->desc.bInterfaceNumber == 2))
return -ENODEV;
/* Don't bind network interface on Samsung GT-B3730, it is handled by a separate module */
diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c
index 05a8832..d06886a 100644
--- a/drivers/video/backlight/adp8870_bl.c
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -1009,4 +1009,4 @@
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("ADP8870 Backlight driver");
-MODULE_ALIAS("platform:adp8870-backlight");
+MODULE_ALIAS("i2c:adp8870-backlight");
diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c
index 9f1e389..b058291 100644
--- a/drivers/video/backlight/ep93xx_bl.c
+++ b/drivers/video/backlight/ep93xx_bl.c
@@ -11,7 +11,7 @@
* BRIGHT, on the Cirrus EP9307, EP9312, and EP9315 processors.
*/
-
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/fb.h>
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index b8f38ec..8b5b2a4 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -28,6 +28,8 @@
unsigned int lth_brightness;
int (*notify)(struct device *,
int brightness);
+ void (*notify_after)(struct device *,
+ int brightness);
int (*check_fb)(struct device *, struct fb_info *);
};
@@ -55,6 +57,10 @@
pwm_config(pb->pwm, brightness, pb->period);
pwm_enable(pb->pwm);
}
+
+ if (pb->notify_after)
+ pb->notify_after(pb->dev, brightness);
+
return 0;
}
@@ -105,6 +111,7 @@
pb->period = data->pwm_period_ns;
pb->notify = data->notify;
+ pb->notify_after = data->notify_after;
pb->check_fb = data->check_fb;
pb->lth_brightness = data->lth_brightness *
(data->pwm_period_ns / data->max_brightness);
@@ -172,6 +179,8 @@
pb->notify(pb->dev, 0);
pwm_config(pb->pwm, 0, pb->period);
pwm_disable(pb->pwm);
+ if (pb->notify_after)
+ pb->notify_after(pb->dev, 0);
return 0;
}
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 02bf7bf..b5abaae 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -1,7 +1,7 @@
/*
* dscore.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
@@ -1024,5 +1024,5 @@
module_exit(ds_fini);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("DS2490 USB <-> W1 bus master driver (DS9490*)");
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index 334d1cc..f667c26 100644
--- a/drivers/w1/masters/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -1,7 +1,7 @@
/*
* matrox_w1.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
@@ -39,7 +39,7 @@
#include "../w1_log.h"
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire prtocol) over VGA DDC(matrox gpio).");
static struct pci_device_id matrox_w1_tbl[] = {
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c
index c377818..7c8cdb8 100644
--- a/drivers/w1/slaves/w1_ds2408.c
+++ b/drivers/w1/slaves/w1_ds2408.c
@@ -373,7 +373,7 @@
static void w1_f29_remove_slave(struct w1_slave *sl)
{
int i;
- for (i = NB_SYSFS_BIN_FILES; i <= 0; --i)
+ for (i = NB_SYSFS_BIN_FILES - 1; i >= 0; --i)
sysfs_remove_bin_file(&sl->dev.kobj,
&(w1_f29_sysfs_bin_files[i]));
}
diff --git a/drivers/w1/slaves/w1_smem.c b/drivers/w1/slaves/w1_smem.c
index cc8c02e..8465562 100644
--- a/drivers/w1/slaves/w1_smem.c
+++ b/drivers/w1/slaves/w1_smem.c
@@ -1,7 +1,7 @@
/*
* w1_smem.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
@@ -32,7 +32,7 @@
#include "../w1_family.h"
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, 64bit memory family.");
static struct w1_family w1_smem_family_01 = {
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 402928b1..a1ef9b5 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -1,7 +1,7 @@
/*
* w1_therm.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
@@ -34,7 +34,7 @@
#include "../w1_family.h"
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, temperature family.");
/* Allow the strong pullup to be disabled, but default to enabled.
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 6c136c1..c374978 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -1,7 +1,7 @@
/*
* w1.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
@@ -42,7 +42,7 @@
#include "w1_netlink.h"
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol.");
static int w1_timeout = 10;
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
index 1ce23fc..4d012ca 100644
--- a/drivers/w1/w1.h
+++ b/drivers/w1/w1.h
@@ -1,7 +1,7 @@
/*
* w1.h
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c
index 4a09904..6335979 100644
--- a/drivers/w1/w1_family.c
+++ b/drivers/w1/w1_family.c
@@ -1,7 +1,7 @@
/*
* w1_family.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index 98a1ac0..490cda2 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -1,7 +1,7 @@
/*
* w1_family.h
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index b50be3f..d220bce 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -1,7 +1,7 @@
/*
* w1_int.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/w1/w1_int.h b/drivers/w1/w1_int.h
index 4274082..2ad7d44 100644
--- a/drivers/w1/w1_int.h
+++ b/drivers/w1/w1_int.h
@@ -1,7 +1,7 @@
/*
* w1_int.h
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 8e8b64c..765b37b 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -1,7 +1,7 @@
/*
* w1_io.c
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/w1/w1_log.h b/drivers/w1/w1_log.h
index e6ab7cf..9c7bd62 100644
--- a/drivers/w1/w1_log.h
+++ b/drivers/w1/w1_log.h
@@ -1,7 +1,7 @@
/*
* w1_log.h
*
- * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 55aabd9..40788c9 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -1,7 +1,7 @@
/*
* w1_netlink.c
*
- * Copyright (c) 2003 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2003 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h
index 27e950f..b0922dc 100644
--- a/drivers/w1/w1_netlink.h
+++ b/drivers/w1/w1_netlink.h
@@ -1,7 +1,7 @@
/*
* w1_netlink.h
*
- * Copyright (c) 2003 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2003 Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify
diff --git a/fs/compat.c b/fs/compat.c
index 0b48d01..58b1da4 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1675,11 +1675,6 @@
}
#endif /* HAVE_SET_RESTORE_SIGMASK */
-long asmlinkage compat_sys_nfsservctl(int cmd, void *notused, void *notused2)
-{
- return sys_ni_syscall();
-}
-
#ifdef CONFIG_EPOLL
#ifdef HAVE_SET_RESTORE_SIGMASK
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 87b6e04..ec88953 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -491,6 +491,7 @@
inode->i_op = &page_symlink_inode_operations;
break;
}
+ lockdep_annotate_inode_mutex_key(inode);
}
return inode;
}
diff --git a/fs/inode.c b/fs/inode.c
index 73920d5..ec79246 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -848,16 +848,9 @@
}
EXPORT_SYMBOL(new_inode);
-/**
- * unlock_new_inode - clear the I_NEW state and wake up any waiters
- * @inode: new inode to unlock
- *
- * Called when the inode is fully initialised to clear the new state of the
- * inode and wake up anyone waiting for the inode to finish initialisation.
- */
-void unlock_new_inode(struct inode *inode)
-{
#ifdef CONFIG_DEBUG_LOCK_ALLOC
+void lockdep_annotate_inode_mutex_key(struct inode *inode)
+{
if (S_ISDIR(inode->i_mode)) {
struct file_system_type *type = inode->i_sb->s_type;
@@ -873,7 +866,20 @@
&type->i_mutex_dir_key);
}
}
+}
+EXPORT_SYMBOL(lockdep_annotate_inode_mutex_key);
#endif
+
+/**
+ * unlock_new_inode - clear the I_NEW state and wake up any waiters
+ * @inode: new inode to unlock
+ *
+ * Called when the inode is fully initialised to clear the new state of the
+ * inode and wake up anyone waiting for the inode to finish initialisation.
+ */
+void unlock_new_inode(struct inode *inode)
+{
+ lockdep_annotate_inode_mutex_key(inode);
spin_lock(&inode->i_lock);
WARN_ON(!(inode->i_state & I_NEW));
inode->i_state &= ~I_NEW;
diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h
index 4f769593..f4c38d8c 100644
--- a/include/asm-generic/unistd.h
+++ b/include/asm-generic/unistd.h
@@ -143,7 +143,7 @@
/* fs/nfsctl.c */
#define __NR_nfsservctl 42
-__SC_COMP(__NR_nfsservctl, sys_nfsservctl, compat_sys_nfsservctl)
+__SYSCALL(__NR_nfsservctl, sys_ni_syscall)
/* fs/open.c */
#define __NR3264_statfs 43
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 8779405..c6e7523 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -438,7 +438,6 @@
struct compat_timespec __user *tsp,
const compat_sigset_t __user *sigmask,
compat_size_t sigsetsize);
-asmlinkage long compat_sys_nfsservctl(int cmd, void *notused, void *notused2);
asmlinkage long compat_sys_signalfd4(int ufd,
const compat_sigset_t __user *sigmask,
compat_size_t sigsetsize, int flags);
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 0c69ad8..3c9c54f 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -1,7 +1,7 @@
/*
* connector.h
*
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004-2005 Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 178cdb4..c2bd68f 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2318,6 +2318,11 @@
extern struct inode * iget_locked(struct super_block *, unsigned long);
extern int insert_inode_locked4(struct inode *, unsigned long, int (*test)(struct inode *, void *), void *);
extern int insert_inode_locked(struct inode *);
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+extern void lockdep_annotate_inode_mutex_key(struct inode *inode);
+#else
+static inline void lockdep_annotate_inode_mutex_key(struct inode *inode) { };
+#endif
extern void unlock_new_inode(struct inode *);
extern unsigned int get_next_ino(void);
diff --git a/include/linux/personality.h b/include/linux/personality.h
index eec3bae..8fc7dd1a 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -22,6 +22,7 @@
* These occupy the top three bytes.
*/
enum {
+ UNAME26 = 0x0020000,
ADDR_NO_RANDOMIZE = 0x0040000, /* disable randomization of VA space */
FDPIC_FUNCPTRS = 0x0080000, /* userspace function ptrs point to descriptors
* (signal handling)
diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h
index 5e3e25a..63d2df4 100644
--- a/include/linux/pwm_backlight.h
+++ b/include/linux/pwm_backlight.h
@@ -14,6 +14,7 @@
unsigned int pwm_period_ns;
int (*init)(struct device *dev);
int (*notify)(struct device *dev, int brightness);
+ void (*notify_after)(struct device *dev, int brightness);
void (*exit)(struct device *dev);
int (*check_fb)(struct device *dev, struct fb_info *info);
};
diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h
index 9026b30..218168a 100644
--- a/include/linux/rio_regs.h
+++ b/include/linux/rio_regs.h
@@ -36,12 +36,12 @@
#define RIO_PEF_PROCESSOR 0x20000000 /* [I] Processor */
#define RIO_PEF_SWITCH 0x10000000 /* [I] Switch */
#define RIO_PEF_MULTIPORT 0x08000000 /* [VI, 2.1] Multiport */
-#define RIO_PEF_INB_MBOX 0x00f00000 /* [II] Mailboxes */
-#define RIO_PEF_INB_MBOX0 0x00800000 /* [II] Mailbox 0 */
-#define RIO_PEF_INB_MBOX1 0x00400000 /* [II] Mailbox 1 */
-#define RIO_PEF_INB_MBOX2 0x00200000 /* [II] Mailbox 2 */
-#define RIO_PEF_INB_MBOX3 0x00100000 /* [II] Mailbox 3 */
-#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II] Doorbells */
+#define RIO_PEF_INB_MBOX 0x00f00000 /* [II, <= 1.2] Mailboxes */
+#define RIO_PEF_INB_MBOX0 0x00800000 /* [II, <= 1.2] Mailbox 0 */
+#define RIO_PEF_INB_MBOX1 0x00400000 /* [II, <= 1.2] Mailbox 1 */
+#define RIO_PEF_INB_MBOX2 0x00200000 /* [II, <= 1.2] Mailbox 2 */
+#define RIO_PEF_INB_MBOX3 0x00100000 /* [II, <= 1.2] Mailbox 3 */
+#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II, <= 1.2] Doorbells */
#define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */
#define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */
#define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */
@@ -102,7 +102,7 @@
#define RIO_SWITCH_RT_LIMIT 0x34 /* [III, 1.3] Switch Route Table Destination ID Limit CAR */
#define RIO_RT_MAX_DESTID 0x0000ffff
-#define RIO_MBOX_CSR 0x40 /* [II] Mailbox CSR */
+#define RIO_MBOX_CSR 0x40 /* [II, <= 1.2] Mailbox CSR */
#define RIO_MBOX0_AVAIL 0x80000000 /* [II] Mbox 0 avail */
#define RIO_MBOX0_FULL 0x40000000 /* [II] Mbox 0 full */
#define RIO_MBOX0_EMPTY 0x20000000 /* [II] Mbox 0 empty */
@@ -128,8 +128,8 @@
#define RIO_MBOX3_FAIL 0x00000008 /* [II] Mbox 3 fail */
#define RIO_MBOX3_ERROR 0x00000004 /* [II] Mbox 3 error */
-#define RIO_WRITE_PORT_CSR 0x44 /* [I] Write Port CSR */
-#define RIO_DOORBELL_CSR 0x44 /* [II] Doorbell CSR */
+#define RIO_WRITE_PORT_CSR 0x44 /* [I, <= 1.2] Write Port CSR */
+#define RIO_DOORBELL_CSR 0x44 /* [II, <= 1.2] Doorbell CSR */
#define RIO_DOORBELL_AVAIL 0x80000000 /* [II] Doorbell avail */
#define RIO_DOORBELL_FULL 0x40000000 /* [II] Doorbell full */
#define RIO_DOORBELL_EMPTY 0x20000000 /* [II] Doorbell empty */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 8c03b98..1ff0ec2 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -702,9 +702,6 @@
asmlinkage long sys_sysinfo(struct sysinfo __user *info);
asmlinkage long sys_sysfs(int option,
unsigned long arg1, unsigned long arg2);
-asmlinkage long sys_nfsservctl(int cmd,
- struct nfsctl_arg __user *arg,
- void __user *res);
asmlinkage long sys_syslog(int type, char __user *buf, int len);
asmlinkage long sys_uselib(const char __user *library);
asmlinkage long sys_ni_syscall(void);
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index b004e55..2ef4385 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -410,7 +410,28 @@
u16 plen;
} __attribute__ ((packed));
-/* platform data */
+/**
+ * struct ti_st_plat_data - platform data shared between ST driver and
+ * platform specific board file which adds the ST device.
+ * @nshutdown_gpio: Host's GPIO line to which chip's BT_EN is connected.
+ * @dev_name: The UART/TTY name to which chip is interfaced. (eg: /dev/ttyS1)
+ * @flow_cntrl: Should always be 1, since UART's CTS/RTS is used for PM
+ * purposes.
+ * @baud_rate: The baud rate supported by the Host UART controller, this will
+ * be shared across with the chip via a HCI VS command from User-Space Init
+ * Mgr application.
+ * @suspend:
+ * @resume: legacy PM routines hooked to platform specific board file, so as
+ * to take chip-host interface specific action.
+ * @chip_enable:
+ * @chip_disable: Platform/Interface specific mux mode setting, GPIO
+ * configuring, Host side PM disabling etc.. can be done here.
+ * @chip_asleep:
+ * @chip_awake: Chip specific deep sleep states is communicated to Host
+ * specific board-xx.c to take actions such as cut UART clocks when chip
+ * asleep or run host faster when chip awake etc..
+ *
+ */
struct ti_st_plat_data {
long nshutdown_gpio;
unsigned char dev_name[UART_DEV_NAME_LEN]; /* uart name */
@@ -418,6 +439,10 @@
unsigned long baud_rate;
int (*suspend)(struct platform_device *, pm_message_t);
int (*resume)(struct platform_device *);
+ int (*chip_enable) (struct kim_data_s *);
+ int (*chip_disable) (struct kim_data_s *);
+ int (*chip_asleep) (struct kim_data_s *);
+ int (*chip_awake) (struct kim_data_s *);
};
#endif /* TI_WILINK_ST_H */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 44bc0c5..5f2ede8 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -421,6 +421,8 @@
extern void tty_throttle(struct tty_struct *tty);
extern void tty_unthrottle(struct tty_struct *tty);
extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
+extern void tty_driver_remove_tty(struct tty_driver *driver,
+ struct tty_struct *tty);
extern void tty_shutdown(struct tty_struct *tty);
extern void tty_free_termios(struct tty_struct *tty);
extern int is_current_pgrp_orphaned(void);
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 9deeac8..ecdaeb9 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -47,6 +47,9 @@
*
* This routine is called synchronously when a particular tty device
* is closed for the last time freeing up the resources.
+ * Note that tty_shutdown() is not called if ops->shutdown is defined.
+ * This means one is responsible to take care of calling ops->remove (e.g.
+ * via tty_driver_remove_tty) and releasing tty->termios.
*
*
* void (*cleanup)(struct tty_struct * tty);
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index f1bfa12e..2b8963f 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -12,15 +12,6 @@
*
* (thresh - thresh/DIRTY_FULL_SCOPE, thresh)
*
- * The 1/16 region above the global dirty limit will be put to maximum pauses:
- *
- * (limit, limit + limit/DIRTY_MAXPAUSE_AREA)
- *
- * The 1/16 region above the max-pause region, dirty exceeded bdi's will be put
- * to loops:
- *
- * (limit + limit/DIRTY_MAXPAUSE_AREA, limit + limit/DIRTY_PASSGOOD_AREA)
- *
* Further beyond, all dirtier tasks will enter a loop waiting (possibly long
* time) for the dirty pages to drop, unless written enough pages.
*
@@ -31,8 +22,6 @@
*/
#define DIRTY_SCOPE 8
#define DIRTY_FULL_SCOPE (DIRTY_SCOPE / 2)
-#define DIRTY_MAXPAUSE_AREA 16
-#define DIRTY_PASSGOOD_AREA 8
/*
* 4MB minimal write chunk size
diff --git a/include/target/target_core_fabric_ops.h b/include/target/target_core_fabric_ops.h
index 2de8fe9..126c675 100644
--- a/include/target/target_core_fabric_ops.h
+++ b/include/target/target_core_fabric_ops.h
@@ -27,6 +27,12 @@
int (*tpg_check_demo_mode_cache)(struct se_portal_group *);
int (*tpg_check_demo_mode_write_protect)(struct se_portal_group *);
int (*tpg_check_prod_mode_write_protect)(struct se_portal_group *);
+ /*
+ * Optionally used by fabrics to allow demo-mode login, but not
+ * expose any TPG LUNs, and return 'not connected' in standard
+ * inquiry response
+ */
+ int (*tpg_check_demo_mode_login_only)(struct se_portal_group *);
struct se_node_acl *(*tpg_alloc_fabric_acl)(
struct se_portal_group *);
void (*tpg_release_fabric_acl)(struct se_portal_group *,
diff --git a/kernel/printk.c b/kernel/printk.c
index 836a2ae..28a40d8 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1604,7 +1604,7 @@
struct console *con;
for_each_console(con) {
- if (con->flags & CON_BOOT) {
+ if (!keep_bootcon && con->flags & CON_BOOT) {
printk(KERN_INFO "turn off boot console %s%d\n",
con->name, con->index);
unregister_console(con);
diff --git a/kernel/sys.c b/kernel/sys.c
index dd948a1..18ee1d2 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -37,6 +37,8 @@
#include <linux/fs_struct.h>
#include <linux/gfp.h>
#include <linux/syscore_ops.h>
+#include <linux/version.h>
+#include <linux/ctype.h>
#include <linux/compat.h>
#include <linux/syscalls.h>
@@ -44,6 +46,8 @@
#include <linux/user_namespace.h>
#include <linux/kmsg_dump.h>
+/* Move somewhere else to avoid recompiling? */
+#include <generated/utsrelease.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -1161,6 +1165,34 @@
#define override_architecture(name) 0
#endif
+/*
+ * Work around broken programs that cannot handle "Linux 3.0".
+ * Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40
+ */
+static int override_release(char __user *release, int len)
+{
+ int ret = 0;
+ char buf[len];
+
+ if (current->personality & UNAME26) {
+ char *rest = UTS_RELEASE;
+ int ndots = 0;
+ unsigned v;
+
+ while (*rest) {
+ if (*rest == '.' && ++ndots >= 3)
+ break;
+ if (!isdigit(*rest) && *rest != '.')
+ break;
+ rest++;
+ }
+ v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40;
+ snprintf(buf, len, "2.6.%u%s", v, rest);
+ ret = copy_to_user(release, buf, len);
+ }
+ return ret;
+}
+
SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
{
int errno = 0;
@@ -1170,6 +1202,8 @@
errno = -EFAULT;
up_read(&uts_sem);
+ if (!errno && override_release(name->release, sizeof(name->release)))
+ errno = -EFAULT;
if (!errno && override_architecture(name))
errno = -EFAULT;
return errno;
@@ -1191,6 +1225,8 @@
error = -EFAULT;
up_read(&uts_sem);
+ if (!error && override_release(name->release, sizeof(name->release)))
+ error = -EFAULT;
if (!error && override_architecture(name))
error = -EFAULT;
return error;
@@ -1225,6 +1261,8 @@
if (!error && override_architecture(name))
error = -EFAULT;
+ if (!error && override_release(name->release, sizeof(name->release)))
+ error = -EFAULT;
return error ? -EFAULT : 0;
}
#endif
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 62cbc88..a9a5de0 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -16,7 +16,6 @@
return -ENOSYS;
}
-cond_syscall(sys_nfsservctl);
cond_syscall(sys_quotactl);
cond_syscall(sys32_quotactl);
cond_syscall(sys_acct);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 930de94..ebd1e86 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1841,29 +1841,23 @@
*/
static bool mem_cgroup_oom_lock(struct mem_cgroup *mem)
{
- int lock_count = -1;
struct mem_cgroup *iter, *failed = NULL;
bool cond = true;
for_each_mem_cgroup_tree_cond(iter, mem, cond) {
- bool locked = iter->oom_lock;
-
- iter->oom_lock = true;
- if (lock_count == -1)
- lock_count = iter->oom_lock;
- else if (lock_count != locked) {
+ if (iter->oom_lock) {
/*
* this subtree of our hierarchy is already locked
* so we cannot give a lock.
*/
- lock_count = 0;
failed = iter;
cond = false;
- }
+ } else
+ iter->oom_lock = true;
}
if (!failed)
- goto done;
+ return true;
/*
* OK, we failed to lock the whole subtree so we have to clean up
@@ -1877,8 +1871,7 @@
}
iter->oom_lock = false;
}
-done:
- return lock_count;
+ return false;
}
/*
@@ -2169,13 +2162,7 @@
/* Notify other cpus that system-wide "drain" is running */
get_online_cpus();
- /*
- * Get a hint for avoiding draining charges on the current cpu,
- * which must be exhausted by our charging. It is not required that
- * this be a precise check, so we use raw_smp_processor_id() instead of
- * getcpu()/putcpu().
- */
- curcpu = raw_smp_processor_id();
+ curcpu = get_cpu();
for_each_online_cpu(cpu) {
struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu);
struct mem_cgroup *mem;
@@ -2192,6 +2179,7 @@
schedule_work_on(cpu, &stock->work);
}
}
+ put_cpu();
if (!sync)
goto out;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index d196074..0e309cd 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -754,21 +754,10 @@
* 200ms is typically more than enough to curb heavy dirtiers;
* (b) the pause time limit makes the dirtiers more responsive.
*/
- if (nr_dirty < dirty_thresh +
- dirty_thresh / DIRTY_MAXPAUSE_AREA &&
+ if (nr_dirty < dirty_thresh &&
+ bdi_dirty < (task_bdi_thresh + bdi_thresh) / 2 &&
time_after(jiffies, start_time + MAX_PAUSE))
break;
- /*
- * pass-good area. When some bdi gets blocked (eg. NFS server
- * not responding), or write bandwidth dropped dramatically due
- * to concurrent reads, or dirty threshold suddenly dropped and
- * the dirty pages cannot be brought down anytime soon (eg. on
- * slow USB stick), at least let go of the good bdi's.
- */
- if (nr_dirty < dirty_thresh +
- dirty_thresh / DIRTY_PASSGOOD_AREA &&
- bdi_dirty < bdi_thresh)
- break;
/*
* Increase the delay for each loop, up to our previous
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 7ef6912..b7719ec 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2283,7 +2283,7 @@
.mem_cgroup = mem,
.memcg_record = rec,
};
- unsigned long start, end;
+ ktime_t start, end;
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
@@ -2292,7 +2292,7 @@
sc.may_writepage,
sc.gfp_mask);
- start = sched_clock();
+ start = ktime_get();
/*
* NOTE: Although we can get the priority field, using it
* here is not a good idea, since it limits the pages we can scan.
@@ -2301,10 +2301,10 @@
* the priority and make it zero.
*/
shrink_zone(0, zone, &sc);
- end = sched_clock();
+ end = ktime_get();
if (rec)
- rec->elapsed += end - start;
+ rec->elapsed += ktime_to_ns(ktime_sub(end, start));
*scanned = sc.nr_scanned;
trace_mm_vmscan_memcg_softlimit_reclaim_end(sc.nr_reclaimed);
@@ -2319,7 +2319,7 @@
{
struct zonelist *zonelist;
unsigned long nr_reclaimed;
- unsigned long start, end;
+ ktime_t start, end;
int nid;
struct scan_control sc = {
.may_writepage = !laptop_mode,
@@ -2337,7 +2337,7 @@
.gfp_mask = sc.gfp_mask,
};
- start = sched_clock();
+ start = ktime_get();
/*
* Unlike direct reclaim via alloc_pages(), memcg's reclaim doesn't
* take care of from where we get pages. So the node where we start the
@@ -2352,9 +2352,9 @@
sc.gfp_mask);
nr_reclaimed = do_try_to_free_pages(zonelist, &sc, &shrink);
- end = sched_clock();
+ end = ktime_get();
if (rec)
- rec->elapsed += end - start;
+ rec->elapsed += ktime_to_ns(ktime_sub(end, start));
trace_mm_vmscan_memcg_reclaim_end(nr_reclaimed);
@@ -2529,6 +2529,9 @@
high_wmark_pages(zone), 0, 0)) {
end_zone = i;
break;
+ } else {
+ /* If balanced, clear the congested flag */
+ zone_clear_flag(zone, ZONE_CONGESTED);
}
}
if (i < 0)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 9d761c9..3dfc471 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2574,7 +2574,8 @@
} else {
$cast = $cast2;
}
- WARN("$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . $herecurr);
+ WARN("MINMAX",
+ "$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . $herecurr);
}
}
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index eb2f1e6..4594f33 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -1389,7 +1389,7 @@
warn("$P: No supported VCS found. Add --nogit to options?\n");
warn("Using a git repository produces better results.\n");
warn("Try Linus Torvalds' latest git repository using:\n");
- warn("git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git\n");
+ warn("git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git\n");
$printed_novcs = 1;
}
return 0;
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 502fc94..7696d05 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3348,6 +3348,8 @@
#define MAX_AUTO_DACS 5
+#define DAC_SLAVE_FLAG 0x8000 /* filled dac is a slave */
+
/* fill analog DAC list from the widget tree */
static int fill_cx_auto_dacs(struct hda_codec *codec, hda_nid_t *dacs)
{
@@ -3370,16 +3372,26 @@
/* fill pin_dac_pair list from the pin and dac list */
static int fill_dacs_for_pins(struct hda_codec *codec, hda_nid_t *pins,
int num_pins, hda_nid_t *dacs, int *rest,
- struct pin_dac_pair *filled, int type)
+ struct pin_dac_pair *filled, int nums,
+ int type)
{
- int i, nums;
+ int i, start = nums;
- nums = 0;
- for (i = 0; i < num_pins; i++) {
+ for (i = 0; i < num_pins; i++, nums++) {
filled[nums].pin = pins[i];
filled[nums].type = type;
filled[nums].dac = get_unassigned_dac(codec, pins[i], dacs, rest);
- nums++;
+ if (filled[nums].dac)
+ continue;
+ if (filled[start].dac && get_connection_index(codec, pins[i], filled[start].dac) >= 0) {
+ filled[nums].dac = filled[start].dac | DAC_SLAVE_FLAG;
+ continue;
+ }
+ if (filled[0].dac && get_connection_index(codec, pins[i], filled[0].dac) >= 0) {
+ filled[nums].dac = filled[0].dac | DAC_SLAVE_FLAG;
+ continue;
+ }
+ snd_printdd("Failed to find a DAC for pin 0x%x", pins[i]);
}
return nums;
}
@@ -3395,19 +3407,19 @@
rest = fill_cx_auto_dacs(codec, dacs);
/* parse all analog output pins */
nums = fill_dacs_for_pins(codec, cfg->line_out_pins, cfg->line_outs,
- dacs, &rest, spec->dac_info,
- AUTO_PIN_LINE_OUT);
- nums += fill_dacs_for_pins(codec, cfg->hp_pins, cfg->hp_outs,
- dacs, &rest, spec->dac_info + nums,
- AUTO_PIN_HP_OUT);
- nums += fill_dacs_for_pins(codec, cfg->speaker_pins, cfg->speaker_outs,
- dacs, &rest, spec->dac_info + nums,
- AUTO_PIN_SPEAKER_OUT);
+ dacs, &rest, spec->dac_info, 0,
+ AUTO_PIN_LINE_OUT);
+ nums = fill_dacs_for_pins(codec, cfg->hp_pins, cfg->hp_outs,
+ dacs, &rest, spec->dac_info, nums,
+ AUTO_PIN_HP_OUT);
+ nums = fill_dacs_for_pins(codec, cfg->speaker_pins, cfg->speaker_outs,
+ dacs, &rest, spec->dac_info, nums,
+ AUTO_PIN_SPEAKER_OUT);
spec->dac_info_filled = nums;
/* fill multiout struct */
for (i = 0; i < nums; i++) {
hda_nid_t dac = spec->dac_info[i].dac;
- if (!dac)
+ if (!dac || (dac & DAC_SLAVE_FLAG))
continue;
switch (spec->dac_info[i].type) {
case AUTO_PIN_LINE_OUT:
@@ -3862,7 +3874,7 @@
}
if (imux->num_items >= 2 && cfg->num_inputs == imux->num_items)
cx_auto_check_auto_mic(codec);
- if (imux->num_items > 1 && !spec->auto_mic) {
+ if (imux->num_items > 1) {
for (i = 1; i < imux->num_items; i++) {
if (spec->imux_info[i].adc != spec->imux_info[0].adc) {
spec->adc_switching = 1;
@@ -4035,6 +4047,8 @@
nid = spec->dac_info[i].dac;
if (!nid)
nid = spec->multiout.dac_nids[0];
+ else if (nid & DAC_SLAVE_FLAG)
+ nid &= ~DAC_SLAVE_FLAG;
select_connection(codec, spec->dac_info[i].pin, nid);
}
if (spec->auto_mute) {
@@ -4167,9 +4181,11 @@
hda_nid_t pin, const char *name, int idx)
{
unsigned int caps;
- caps = query_amp_caps(codec, dac, HDA_OUTPUT);
- if (caps & AC_AMPCAP_NUM_STEPS)
- return cx_auto_add_pb_volume(codec, dac, name, idx);
+ if (dac && !(dac & DAC_SLAVE_FLAG)) {
+ caps = query_amp_caps(codec, dac, HDA_OUTPUT);
+ if (caps & AC_AMPCAP_NUM_STEPS)
+ return cx_auto_add_pb_volume(codec, dac, name, idx);
+ }
caps = query_amp_caps(codec, pin, HDA_OUTPUT);
if (caps & AC_AMPCAP_NUM_STEPS)
return cx_auto_add_pb_volume(codec, pin, name, idx);
@@ -4191,8 +4207,7 @@
for (i = 0; i < spec->dac_info_filled; i++) {
const char *label;
int idx, type;
- if (!spec->dac_info[i].dac)
- continue;
+ hda_nid_t dac = spec->dac_info[i].dac;
type = spec->dac_info[i].type;
if (type == AUTO_PIN_LINE_OUT)
type = spec->autocfg.line_out_type;
@@ -4211,7 +4226,7 @@
idx = num_spk++;
break;
}
- err = try_add_pb_volume(codec, spec->dac_info[i].dac,
+ err = try_add_pb_volume(codec, dac,
spec->dac_info[i].pin,
label, idx);
if (err < 0)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index fcb11af..7cabd73 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -565,11 +565,11 @@
{
struct alc_spec *spec = codec->spec;
- if (!spec->automute)
- return;
spec->jack_present =
detect_jacks(codec, ARRAY_SIZE(spec->autocfg.hp_pins),
spec->autocfg.hp_pins);
+ if (!spec->automute)
+ return;
update_speakers(codec);
}
@@ -578,11 +578,11 @@
{
struct alc_spec *spec = codec->spec;
- if (!spec->automute || !spec->detect_line)
- return;
spec->line_jack_present =
detect_jacks(codec, ARRAY_SIZE(spec->autocfg.line_out_pins),
spec->autocfg.line_out_pins);
+ if (!spec->automute || !spec->detect_line)
+ return;
update_speakers(codec);
}
@@ -3083,16 +3083,22 @@
static void alc_auto_init_extra_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- hda_nid_t pin;
+ hda_nid_t pin, dac;
pin = spec->autocfg.hp_pins[0];
- if (pin)
- alc_auto_set_output_and_unmute(codec, pin, PIN_HP,
- spec->multiout.hp_nid);
+ if (pin) {
+ dac = spec->multiout.hp_nid;
+ if (!dac)
+ dac = spec->multiout.dac_nids[0];
+ alc_auto_set_output_and_unmute(codec, pin, PIN_HP, dac);
+ }
pin = spec->autocfg.speaker_pins[0];
- if (pin)
- alc_auto_set_output_and_unmute(codec, pin, PIN_OUT,
- spec->multiout.extra_out_nid[0]);
+ if (pin) {
+ dac = spec->multiout.extra_out_nid[0];
+ if (!dac)
+ dac = spec->multiout.dac_nids[0];
+ alc_auto_set_output_and_unmute(codec, pin, PIN_OUT, dac);
+ }
}
/*
diff --git a/sound/soc/blackfin/bf5xx-ad193x.c b/sound/soc/blackfin/bf5xx-ad193x.c
index d6651c0..a118a0f 100644
--- a/sound/soc/blackfin/bf5xx-ad193x.c
+++ b/sound/soc/blackfin/bf5xx-ad193x.c
@@ -56,7 +56,7 @@
switch (params_rate(params)) {
case 48000:
- clk = 12288000;
+ clk = 24576000;
break;
}
diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c
index 2374ca5..eedb6f5 100644
--- a/sound/soc/codecs/ad193x.c
+++ b/sound/soc/codecs/ad193x.c
@@ -27,11 +27,6 @@
int sysclk;
};
-/* ad193x register cache & default register settings */
-static const u8 ad193x_reg[AD193X_NUM_REGS] = {
- 0, 0, 0, 0, 0, 0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0, 0, 0,
-};
-
/*
* AD193X volume/mute/de-emphasis etc. controls
*/
@@ -307,7 +302,8 @@
snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, reg);
reg = snd_soc_read(codec, AD193X_DAC_CTRL2);
- reg = (reg & (~AD193X_DAC_WORD_LEN_MASK)) | word_len;
+ reg = (reg & (~AD193X_DAC_WORD_LEN_MASK))
+ | (word_len << AD193X_DAC_WORD_LEN_SHFT);
snd_soc_write(codec, AD193X_DAC_CTRL2, reg);
reg = snd_soc_read(codec, AD193X_ADC_CTRL1);
@@ -389,9 +385,6 @@
static struct snd_soc_codec_driver soc_codec_dev_ad193x = {
.probe = ad193x_probe,
- .reg_cache_default = ad193x_reg,
- .reg_cache_size = AD193X_NUM_REGS,
- .reg_word_size = sizeof(u16),
};
#if defined(CONFIG_SPI_MASTER)
diff --git a/sound/soc/codecs/ad193x.h b/sound/soc/codecs/ad193x.h
index 9747b54..cccc2e8 100644
--- a/sound/soc/codecs/ad193x.h
+++ b/sound/soc/codecs/ad193x.h
@@ -34,7 +34,8 @@
#define AD193X_DAC_LEFT_HIGH (1 << 3)
#define AD193X_DAC_BCLK_INV (1 << 7)
#define AD193X_DAC_CTRL2 0x804
-#define AD193X_DAC_WORD_LEN_MASK 0xC
+#define AD193X_DAC_WORD_LEN_SHFT 3
+#define AD193X_DAC_WORD_LEN_MASK 0x18
#define AD193X_DAC_MASTER_MUTE 1
#define AD193X_DAC_CHNL_MUTE 0x805
#define AD193X_DACL1_MUTE 0
@@ -63,7 +64,7 @@
#define AD193X_ADC_CTRL1 0x80f
#define AD193X_ADC_SERFMT_MASK 0x60
#define AD193X_ADC_SERFMT_STEREO (0 << 5)
-#define AD193X_ADC_SERFMT_TDM (1 << 2)
+#define AD193X_ADC_SERFMT_TDM (1 << 5)
#define AD193X_ADC_SERFMT_AUX (2 << 5)
#define AD193X_ADC_WORD_LEN_MASK 0x3
#define AD193X_ADC_CTRL2 0x810
diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c
index 409d89d..fbd7eb9 100644
--- a/sound/soc/codecs/sta32x.c
+++ b/sound/soc/codecs/sta32x.c
@@ -857,6 +857,7 @@
ret = snd_soc_register_codec(&i2c->dev, &sta32x_codec, &sta32x_dai, 1);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to register codec (%d)\n", ret);
+ kfree(sta32x);
return ret;
}
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 60d740e..1725550 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2221,6 +2221,8 @@
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
if (fll) {
+ try_wait_for_completion(&wm8962->fll_lock);
+
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1,
WM8962_FLL_ENA, WM8962_FLL_ENA);
if (wm8962->irq) {
@@ -2927,10 +2929,6 @@
WM8962_BIAS_ENA | 0x180);
msleep(5);
-
- snd_soc_update_bits(codec, WM8962_CLOCKING2,
- WM8962_CLKREG_OVD,
- WM8962_CLKREG_OVD);
}
/* VMID 2*250k */
@@ -3288,6 +3286,8 @@
snd_soc_write(codec, WM8962_FLL_CONTROL_7, fll_div.lambda);
snd_soc_write(codec, WM8962_FLL_CONTROL_8, fll_div.n);
+ try_wait_for_completion(&wm8962->fll_lock);
+
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1,
WM8962_FLL_FRAC | WM8962_FLL_REFCLK_SRC_MASK |
WM8962_FLL_ENA, fll1);
@@ -3868,6 +3868,10 @@
*/
snd_soc_update_bits(codec, WM8962_CLOCKING2, WM8962_SYSCLK_ENA, 0);
+ /* Ensure we have soft control over all registers */
+ snd_soc_update_bits(codec, WM8962_CLOCKING2,
+ WM8962_CLKREG_OVD, WM8962_CLKREG_OVD);
+
regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
if (pdata) {
diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c
index ab8e9d1..0cdb9d1 100644
--- a/sound/soc/codecs/wm8996.c
+++ b/sound/soc/codecs/wm8996.c
@@ -420,7 +420,7 @@
};
static const struct soc_enum sidetone_hpf =
- SOC_ENUM_SINGLE(WM8996_SIDETONE, 7, 6, sidetone_hpf_text);
+ SOC_ENUM_SINGLE(WM8996_SIDETONE, 7, 7, sidetone_hpf_text);
static const char *hpf_mode_text[] = {
"HiFi", "Custom", "Voice"
@@ -988,15 +988,10 @@
SND_SOC_DAPM_PGA("IN1L PGA", WM8996_POWER_MANAGEMENT_2, 5, 0, NULL, 0),
SND_SOC_DAPM_PGA("IN1R PGA", WM8996_POWER_MANAGEMENT_2, 4, 0, NULL, 0),
-SND_SOC_DAPM_MUX("IN1L Mux", SND_SOC_NOPM, 0, 0, &in1_mux),
-SND_SOC_DAPM_MUX("IN1R Mux", SND_SOC_NOPM, 0, 0, &in1_mux),
-SND_SOC_DAPM_MUX("IN2L Mux", SND_SOC_NOPM, 0, 0, &in2_mux),
-SND_SOC_DAPM_MUX("IN2R Mux", SND_SOC_NOPM, 0, 0, &in2_mux),
-
-SND_SOC_DAPM_PGA("IN1L", WM8996_POWER_MANAGEMENT_7, 2, 0, NULL, 0),
-SND_SOC_DAPM_PGA("IN1R", WM8996_POWER_MANAGEMENT_7, 3, 0, NULL, 0),
-SND_SOC_DAPM_PGA("IN2L", WM8996_POWER_MANAGEMENT_7, 6, 0, NULL, 0),
-SND_SOC_DAPM_PGA("IN2R", WM8996_POWER_MANAGEMENT_7, 7, 0, NULL, 0),
+SND_SOC_DAPM_MUX("IN1L Mux", WM8996_POWER_MANAGEMENT_7, 2, 0, &in1_mux),
+SND_SOC_DAPM_MUX("IN1R Mux", WM8996_POWER_MANAGEMENT_7, 3, 0, &in1_mux),
+SND_SOC_DAPM_MUX("IN2L Mux", WM8996_POWER_MANAGEMENT_7, 6, 0, &in2_mux),
+SND_SOC_DAPM_MUX("IN2R Mux", WM8996_POWER_MANAGEMENT_7, 7, 0, &in2_mux),
SND_SOC_DAPM_SUPPLY("DMIC2", WM8996_POWER_MANAGEMENT_7, 9, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("DMIC1", WM8996_POWER_MANAGEMENT_7, 8, 0, NULL, 0),
@@ -1213,6 +1208,16 @@
{ "AIF2RX0", NULL, "AIFCLK" },
{ "AIF2RX1", NULL, "AIFCLK" },
+ { "AIF1TX0", NULL, "AIFCLK" },
+ { "AIF1TX1", NULL, "AIFCLK" },
+ { "AIF1TX2", NULL, "AIFCLK" },
+ { "AIF1TX3", NULL, "AIFCLK" },
+ { "AIF1TX4", NULL, "AIFCLK" },
+ { "AIF1TX5", NULL, "AIFCLK" },
+
+ { "AIF2TX0", NULL, "AIFCLK" },
+ { "AIF2TX1", NULL, "AIFCLK" },
+
{ "DSP1RXL", NULL, "SYSDSPCLK" },
{ "DSP1RXR", NULL, "SYSDSPCLK" },
{ "DSP2RXL", NULL, "SYSDSPCLK" },
@@ -2106,6 +2111,9 @@
snd_soc_write(codec, WM8996_FLL_EFS_1, fll_div.lambda);
+ /* Clear any pending completions (eg, from failed startups) */
+ try_wait_for_completion(&wm8996->fll_lock);
+
snd_soc_update_bits(codec, WM8996_FLL_CONTROL_1,
WM8996_FLL_ENA, WM8996_FLL_ENA);
diff --git a/sound/soc/ep93xx/ep93xx-i2s.c b/sound/soc/ep93xx/ep93xx-i2s.c
index 56efa0c..099614e 100644
--- a/sound/soc/ep93xx/ep93xx-i2s.c
+++ b/sound/soc/ep93xx/ep93xx-i2s.c
@@ -385,14 +385,14 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
err = -ENODEV;
- goto fail;
+ goto fail_free_info;
}
info->mem = request_mem_region(res->start, resource_size(res),
pdev->name);
if (!info->mem) {
err = -EBUSY;
- goto fail;
+ goto fail_free_info;
}
info->regs = ioremap(info->mem->start, resource_size(info->mem));
@@ -435,6 +435,7 @@
iounmap(info->regs);
fail_release_mem:
release_mem_region(info->mem->start, resource_size(info->mem));
+fail_free_info:
kfree(info);
fail:
return err;
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index 732208c..cb50598 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -879,10 +879,12 @@
* assume that device_node pointers are a valid comparison.
*/
np = of_parse_phandle(ssi_np, "fsl,playback-dma", 0);
+ of_node_put(np);
if (np == dma_channel_np)
return ssi_np;
np = of_parse_phandle(ssi_np, "fsl,capture-dma", 0);
+ of_node_put(np);
if (np == dma_channel_np)
return ssi_np;
}
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index a192979..358f0ba 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -345,8 +345,10 @@
}
machine_data = kzalloc(sizeof(struct mpc8610_hpcd_data), GFP_KERNEL);
- if (!machine_data)
- return -ENOMEM;
+ if (!machine_data) {
+ ret = -ENOMEM;
+ goto error_alloc;
+ }
machine_data->dai[0].cpu_dai_name = dev_name(&ssi_pdev->dev);
machine_data->dai[0].ops = &mpc8610_hpcd_ops;
@@ -494,7 +496,7 @@
ret = platform_device_add(sound_device);
if (ret) {
dev_err(&pdev->dev, "platform device add failed\n");
- goto error;
+ goto error_sound;
}
dev_set_drvdata(&pdev->dev, sound_device);
@@ -502,14 +504,12 @@
return 0;
+error_sound:
+ platform_device_unregister(sound_device);
error:
- of_node_put(codec_np);
-
- if (sound_device)
- platform_device_unregister(sound_device);
-
kfree(machine_data);
-
+error_alloc:
+ of_node_put(codec_np);
return ret;
}
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index 8fa4d5f..fcb862e 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -297,8 +297,10 @@
* dai->platform name should already point to an allocated buffer.
*/
ret = of_address_to_resource(dma_channel_np, 0, &res);
- if (ret)
+ if (ret) {
+ of_node_put(dma_channel_np);
return ret;
+ }
snprintf((char *)dai->platform_name, DAI_NAME_SIZE, "%llx.%s",
(unsigned long long) res.start, dma_channel_np->name);
diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c
index a33fc51..8f16cd3 100644
--- a/sound/soc/kirkwood/kirkwood-i2s.c
+++ b/sound/soc/kirkwood/kirkwood-i2s.c
@@ -424,7 +424,7 @@
if (!priv->mem) {
dev_err(&pdev->dev, "request_mem_region failed\n");
err = -EBUSY;
- goto error;
+ goto error_alloc;
}
priv->io = ioremap(priv->mem->start, SZ_16K);
diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
index 30fe0d0e..0aa475f 100644
--- a/sound/soc/omap/ams-delta.c
+++ b/sound/soc/omap/ams-delta.c
@@ -514,7 +514,7 @@
}
/* Set codec bias level */
- ams_delta_set_bias_level(card, SND_SOC_BIAS_STANDBY);
+ ams_delta_set_bias_level(card, dapm, SND_SOC_BIAS_STANDBY);
/* Add hook switch - can be used to control the codec from userspace
* even if line discipline fails */
@@ -649,7 +649,9 @@
ams_delta_hook_switch_gpios);
/* Keep modem power on */
- ams_delta_set_bias_level(&ams_delta_audio_card, SND_SOC_BIAS_STANDBY);
+ ams_delta_set_bias_level(&ams_delta_audio_card,
+ &ams_delta_audio_card.rtd[0].codec->dapm,
+ SND_SOC_BIAS_STANDBY);
platform_device_unregister(cx20442_platform_device);
platform_device_unregister(ams_delta_audio_platform_device);
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index b99091f..65f980e 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -185,6 +185,7 @@
select SND_SAMSUNG_I2S
select SND_SOC_WM8996
select SND_SOC_WM9081
+ select SND_SOC_WM1250_EV1
config SND_SOC_SPEYSIDE_WM8962
tristate "Audio support for Wolfson Speyside with WM8962"
diff --git a/sound/soc/samsung/h1940_uda1380.c b/sound/soc/samsung/h1940_uda1380.c
index 241f55d..c6c6589 100644
--- a/sound/soc/samsung/h1940_uda1380.c
+++ b/sound/soc/samsung/h1940_uda1380.c
@@ -13,6 +13,7 @@
*
*/
+#include <linux/types.h>
#include <linux/gpio.h>
#include <sound/soc.h>
diff --git a/sound/soc/samsung/rx1950_uda1380.c b/sound/soc/samsung/rx1950_uda1380.c
index 1e574a5..bc8c167 100644
--- a/sound/soc/samsung/rx1950_uda1380.c
+++ b/sound/soc/samsung/rx1950_uda1380.c
@@ -17,6 +17,7 @@
*
*/
+#include <linux/types.h>
#include <linux/gpio.h>
#include <sound/soc.h>
diff --git a/sound/soc/samsung/speyside_wm8962.c b/sound/soc/samsung/speyside_wm8962.c
index 0b9eb5f..72535f2 100644
--- a/sound/soc/samsung/speyside_wm8962.c
+++ b/sound/soc/samsung/speyside_wm8962.c
@@ -23,6 +23,9 @@
struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
int ret;
+ if (dapm->dev != codec_dai->dev)
+ return 0;
+
switch (level) {
case SND_SOC_BIAS_PREPARE:
if (dapm->bias_level == SND_SOC_BIAS_STANDBY) {
@@ -57,6 +60,9 @@
struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
int ret;
+ if (dapm->dev != codec_dai->dev)
+ return 0;
+
switch (level) {
case SND_SOC_BIAS_STANDBY:
ret = snd_soc_dai_set_sysclk(codec_dai, WM8962_SYSCLK_MCLK,
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 83ad8ca..b085d8e 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1913,7 +1913,7 @@
if (prefix) {
name_len = strlen(long_name) + strlen(prefix) + 2;
- name = kmalloc(name_len, GFP_ATOMIC);
+ name = kmalloc(name_len, GFP_KERNEL);
if (!name)
return NULL;
diff --git a/sound/soc/soc-io.c b/sound/soc/soc-io.c
index cca490c..a62f7dd 100644
--- a/sound/soc/soc-io.c
+++ b/sound/soc/soc-io.c
@@ -205,6 +205,25 @@
#define snd_soc_16_8_read_i2c NULL
#endif
+#if defined(CONFIG_SPI_MASTER)
+static unsigned int snd_soc_16_8_read_spi(struct snd_soc_codec *codec,
+ unsigned int r)
+{
+ struct spi_device *spi = codec->control_data;
+
+ const u16 reg = cpu_to_be16(r | 0x100);
+ u8 data;
+ int ret;
+
+ ret = spi_write_then_read(spi, ®, 2, &data, 1);
+ if (ret < 0)
+ return 0;
+ return data;
+}
+#else
+#define snd_soc_16_8_read_spi NULL
+#endif
+
static int snd_soc_16_8_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
@@ -295,6 +314,7 @@
int (*write)(struct snd_soc_codec *codec, unsigned int, unsigned int);
unsigned int (*read)(struct snd_soc_codec *, unsigned int);
unsigned int (*i2c_read)(struct snd_soc_codec *, unsigned int);
+ unsigned int (*spi_read)(struct snd_soc_codec *, unsigned int);
} io_types[] = {
{
.addr_bits = 4, .data_bits = 12,
@@ -318,6 +338,7 @@
.addr_bits = 16, .data_bits = 8,
.write = snd_soc_16_8_write,
.i2c_read = snd_soc_16_8_read_i2c,
+ .spi_read = snd_soc_16_8_read_spi,
},
{
.addr_bits = 16, .data_bits = 16,
@@ -383,6 +404,8 @@
#ifdef CONFIG_SPI_MASTER
codec->hw_write = do_spi_write;
#endif
+ if (io_types[i].spi_read)
+ codec->hw_read = io_types[i].spi_read;
codec->control_data = container_of(codec->dev,
struct spi_device,
diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index 7c17b98..38b0013 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -327,7 +327,7 @@
IRQF_TRIGGER_FALLING,
gpios[i].name,
&gpios[i]);
- if (ret)
+ if (ret < 0)
goto err;
if (gpios[i].wake) {
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index b575939..2879c88 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -290,6 +290,9 @@
codec_dai->active--;
codec->active--;
+ if (!cpu_dai->active && !codec_dai->active)
+ rtd->rate = 0;
+
/* Muting the DAC suppresses artifacts caused during digital
* shutdown, for example from stopping clocks.
*/
diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c
index 661373c..be27f1d 100644
--- a/sound/soc/tegra/tegra_wm8903.c
+++ b/sound/soc/tegra/tegra_wm8903.c
@@ -319,7 +319,7 @@
snd_soc_dapm_force_enable_pin(dapm, "Mic Bias");
/* FIXME: Calculate automatically based on DAPM routes? */
- if (!machine_is_harmony() && !machine_is_ventana())
+ if (!machine_is_harmony())
snd_soc_dapm_nc_pin(dapm, "IN1L");
if (!machine_is_seaboard() && !machine_is_aebl())
snd_soc_dapm_nc_pin(dapm, "IN1R");
@@ -395,7 +395,7 @@
platform_set_drvdata(pdev, card);
snd_soc_card_set_drvdata(card, machine);
- if (machine_is_harmony() || machine_is_ventana()) {
+ if (machine_is_harmony()) {
card->dapm_routes = harmony_audio_map;
card->num_dapm_routes = ARRAY_SIZE(harmony_audio_map);
} else if (machine_is_seaboard()) {
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index 94c2cf0a..e8a03ac 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -24,7 +24,7 @@
# Set the following to `true' to make a unstripped, unoptimized
# binary. Leave this set to `false' for production use.
-DEBUG ?= false
+DEBUG ?= true
# make the build silent. Set this to something else to make it noisy again.
V ?= false
@@ -35,7 +35,7 @@
# Set the following to 'true' to build/install the
# cpufreq-bench benchmarking tool
-CPUFRQ_BENCH ?= true
+CPUFREQ_BENCH ?= true
# Prefix to the directories we're installing to
DESTDIR ?=
@@ -137,9 +137,10 @@
ifeq ($(strip $(NLS)),true)
INSTALL_NLS += install-gmo
COMPILE_NLS += create-gmo
+ CFLAGS += -DNLS
endif
-ifeq ($(strip $(CPUFRQ_BENCH)),true)
+ifeq ($(strip $(CPUFREQ_BENCH)),true)
INSTALL_BENCH += install-bench
COMPILE_BENCH += compile-bench
endif
diff --git a/tools/power/cpupower/debug/x86_64/Makefile b/tools/power/cpupower/debug/x86_64/Makefile
index dbf1399..3326217 100644
--- a/tools/power/cpupower/debug/x86_64/Makefile
+++ b/tools/power/cpupower/debug/x86_64/Makefile
@@ -1,10 +1,10 @@
default: all
-centrino-decode: centrino-decode.c
- $(CC) $(CFLAGS) -o centrino-decode centrino-decode.c
+centrino-decode: ../i386/centrino-decode.c
+ $(CC) $(CFLAGS) -o $@ $<
-powernow-k8-decode: powernow-k8-decode.c
- $(CC) $(CFLAGS) -o powernow-k8-decode powernow-k8-decode.c
+powernow-k8-decode: ../i386/powernow-k8-decode.c
+ $(CC) $(CFLAGS) -o $@ $<
all: centrino-decode powernow-k8-decode
diff --git a/tools/power/cpupower/debug/x86_64/centrino-decode.c b/tools/power/cpupower/debug/x86_64/centrino-decode.c
deleted file mode 120000
index 26fb3f1..0000000
--- a/tools/power/cpupower/debug/x86_64/centrino-decode.c
+++ /dev/null
@@ -1 +0,0 @@
-../i386/centrino-decode.c
\ No newline at end of file
diff --git a/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c b/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c
deleted file mode 120000
index eb30c79..0000000
--- a/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c
+++ /dev/null
@@ -1 +0,0 @@
-../i386/powernow-k8-decode.c
\ No newline at end of file
diff --git a/tools/power/cpupower/man/cpupower-frequency-info.1 b/tools/power/cpupower/man/cpupower-frequency-info.1
index 3194811..bb60a8d 100644
--- a/tools/power/cpupower/man/cpupower-frequency-info.1
+++ b/tools/power/cpupower/man/cpupower-frequency-info.1
@@ -1,10 +1,10 @@
-.TH "cpufreq-info" "1" "0.1" "Mattia Dongili" ""
+.TH "cpupower-frequency-info" "1" "0.1" "Mattia Dongili" ""
.SH "NAME"
.LP
-cpufreq\-info \- Utility to retrieve cpufreq kernel information
+cpupower frequency\-info \- Utility to retrieve cpufreq kernel information
.SH "SYNTAX"
.LP
-cpufreq\-info [\fIoptions\fP]
+cpupower [ \-c cpulist ] frequency\-info [\fIoptions\fP]
.SH "DESCRIPTION"
.LP
A small tool which prints out cpufreq information helpful to developers and interested users.
diff --git a/tools/power/cpupower/man/cpupower-frequency-set.1 b/tools/power/cpupower/man/cpupower-frequency-set.1
index 26e3e13..685f469 100644
--- a/tools/power/cpupower/man/cpupower-frequency-set.1
+++ b/tools/power/cpupower/man/cpupower-frequency-set.1
@@ -1,13 +1,13 @@
-.TH "cpufreq-set" "1" "0.1" "Mattia Dongili" ""
+.TH "cpupower-freqency-set" "1" "0.1" "Mattia Dongili" ""
.SH "NAME"
.LP
-cpufreq\-set \- A small tool which allows to modify cpufreq settings.
+cpupower frequency\-set \- A small tool which allows to modify cpufreq settings.
.SH "SYNTAX"
.LP
-cpufreq\-set [\fIoptions\fP]
+cpupower [ \-c cpu ] frequency\-set [\fIoptions\fP]
.SH "DESCRIPTION"
.LP
-cpufreq\-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all the time.
+cpupower frequency\-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all the time.
.SH "OPTIONS"
.LP
.TP
diff --git a/tools/power/cpupower/man/cpupower.1 b/tools/power/cpupower/man/cpupower.1
index 78c20fe..baf741d 100644
--- a/tools/power/cpupower/man/cpupower.1
+++ b/tools/power/cpupower/man/cpupower.1
@@ -3,7 +3,7 @@
cpupower \- Shows and sets processor power related values
.SH SYNOPSIS
.ft B
-.B cpupower [ \-c cpulist ] subcommand [ARGS]
+.B cpupower [ \-c cpulist ] <command> [ARGS]
.B cpupower \-v|\-\-version
@@ -13,24 +13,24 @@
\fBcpupower \fP is a collection of tools to examine and tune power saving
related features of your processor.
-The manpages of the subcommands (cpupower\-<subcommand>(1)) provide detailed
+The manpages of the commands (cpupower\-<command>(1)) provide detailed
descriptions of supported features. Run \fBcpupower help\fP to get an overview
-of supported subcommands.
+of supported commands.
.SH Options
.PP
\-\-help, \-h
.RS 4
-Shows supported subcommands and general usage.
+Shows supported commands and general usage.
.RE
.PP
\-\-cpu cpulist, \-c cpulist
.RS 4
Only show or set values for specific cores.
-This option is not supported by all subcommands, details can be found in the
-manpages of the subcommands.
+This option is not supported by all commands, details can be found in the
+manpages of the commands.
-Some subcommands access all cores (typically the *\-set commands), some only
+Some commands access all cores (typically the *\-set commands), some only
the first core (typically the *\-info commands) by default.
The syntax for <cpulist> is based on how the kernel exports CPU bitmasks via
diff --git a/tools/power/cpupower/utils/builtin.h b/tools/power/cpupower/utils/builtin.h
index c870ffb..c10496f 100644
--- a/tools/power/cpupower/utils/builtin.h
+++ b/tools/power/cpupower/utils/builtin.h
@@ -8,11 +8,4 @@
extern int cmd_idle_info(int argc, const char **argv);
extern int cmd_monitor(int argc, const char **argv);
-extern void set_help(void);
-extern void info_help(void);
-extern void freq_set_help(void);
-extern void freq_info_help(void);
-extern void idle_info_help(void);
-extern void monitor_help(void);
-
#endif
diff --git a/tools/power/cpupower/utils/cpufreq-info.c b/tools/power/cpupower/utils/cpufreq-info.c
index 5a1d25f..28953c9 100644
--- a/tools/power/cpupower/utils/cpufreq-info.c
+++ b/tools/power/cpupower/utils/cpufreq-info.c
@@ -510,37 +510,6 @@
return 0;
}
-void freq_info_help(void)
-{
- printf(_("Usage: cpupower freqinfo [options]\n"));
- printf(_("Options:\n"));
- printf(_(" -e, --debug Prints out debug information [default]\n"));
- printf(_(" -f, --freq Get frequency the CPU currently runs at, according\n"
- " to the cpufreq core *\n"));
- printf(_(" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n"
- " it from hardware (only available to root) *\n"));
- printf(_(" -l, --hwlimits Determine the minimum and maximum CPU frequency allowed *\n"));
- printf(_(" -d, --driver Determines the used cpufreq kernel driver *\n"));
- printf(_(" -p, --policy Gets the currently used cpufreq policy *\n"));
- printf(_(" -g, --governors Determines available cpufreq governors *\n"));
- printf(_(" -r, --related-cpus Determines which CPUs run at the same hardware frequency *\n"));
- printf(_(" -a, --affected-cpus Determines which CPUs need to have their frequency\n"
- " coordinated by software *\n"));
- printf(_(" -s, --stats Shows cpufreq statistics if available\n"));
- printf(_(" -y, --latency Determines the maximum latency on CPU frequency changes *\n"));
- printf(_(" -b, --boost Checks for turbo or boost modes *\n"));
- printf(_(" -o, --proc Prints out information like provided by the /proc/cpufreq\n"
- " interface in 2.4. and early 2.6. kernels\n"));
- printf(_(" -m, --human human-readable output for the -f, -w, -s and -y parameters\n"));
- printf(_(" -h, --help Prints out this screen\n"));
-
- printf("\n");
- printf(_("If no argument is given, full output about\n"
- "cpufreq is printed which is useful e.g. for reporting bugs.\n\n"));
- printf(_("By default info of CPU 0 is shown which can be overridden\n"
- "with the cpupower --cpu main command option.\n"));
-}
-
static struct option info_opts[] = {
{ .name = "debug", .has_arg = no_argument, .flag = NULL, .val = 'e'},
{ .name = "boost", .has_arg = no_argument, .flag = NULL, .val = 'b'},
@@ -556,7 +525,6 @@
{ .name = "latency", .has_arg = no_argument, .flag = NULL, .val = 'y'},
{ .name = "proc", .has_arg = no_argument, .flag = NULL, .val = 'o'},
{ .name = "human", .has_arg = no_argument, .flag = NULL, .val = 'm'},
- { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'},
{ },
};
@@ -570,16 +538,12 @@
int output_param = 0;
do {
- ret = getopt_long(argc, argv, "hoefwldpgrasmyb", info_opts, NULL);
+ ret = getopt_long(argc, argv, "oefwldpgrasmyb", info_opts, NULL);
switch (ret) {
case '?':
output_param = '?';
cont = 0;
break;
- case 'h':
- output_param = 'h';
- cont = 0;
- break;
case -1:
cont = 0;
break;
@@ -642,11 +606,7 @@
return -EINVAL;
case '?':
printf(_("invalid or unknown argument\n"));
- freq_info_help();
return -EINVAL;
- case 'h':
- freq_info_help();
- return EXIT_SUCCESS;
case 'o':
proc_cpufreq_output();
return EXIT_SUCCESS;
diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c
index 5f78362..dd1539e 100644
--- a/tools/power/cpupower/utils/cpufreq-set.c
+++ b/tools/power/cpupower/utils/cpufreq-set.c
@@ -20,34 +20,11 @@
#define NORM_FREQ_LEN 32
-void freq_set_help(void)
-{
- printf(_("Usage: cpupower frequency-set [options]\n"));
- printf(_("Options:\n"));
- printf(_(" -d FREQ, --min FREQ new minimum CPU frequency the governor may select\n"));
- printf(_(" -u FREQ, --max FREQ new maximum CPU frequency the governor may select\n"));
- printf(_(" -g GOV, --governor GOV new cpufreq governor\n"));
- printf(_(" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n"
- " governor to be available and loaded\n"));
- printf(_(" -r, --related Switches all hardware-related CPUs\n"));
- printf(_(" -h, --help Prints out this screen\n"));
- printf("\n");
- printf(_("Notes:\n"
- "1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"));
- printf(_("2. The -f FREQ, --freq FREQ parameter cannot be combined with any other parameter\n"
- " except the -c CPU, --cpu CPU parameter\n"
- "3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
- " by postfixing the value with the wanted unit name, without any space\n"
- " (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"));
-
-}
-
static struct option set_opts[] = {
{ .name = "min", .has_arg = required_argument, .flag = NULL, .val = 'd'},
{ .name = "max", .has_arg = required_argument, .flag = NULL, .val = 'u'},
{ .name = "governor", .has_arg = required_argument, .flag = NULL, .val = 'g'},
{ .name = "freq", .has_arg = required_argument, .flag = NULL, .val = 'f'},
- { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'},
{ .name = "related", .has_arg = no_argument, .flag = NULL, .val='r'},
{ },
};
@@ -80,7 +57,6 @@
static void print_unknown_arg(void)
{
printf(_("invalid or unknown argument\n"));
- freq_set_help();
}
static unsigned long string_to_frequency(const char *str)
@@ -231,14 +207,11 @@
/* parameter parsing */
do {
- ret = getopt_long(argc, argv, "d:u:g:f:hr", set_opts, NULL);
+ ret = getopt_long(argc, argv, "d:u:g:f:r", set_opts, NULL);
switch (ret) {
case '?':
print_unknown_arg();
return -EINVAL;
- case 'h':
- freq_set_help();
- return 0;
case -1:
cont = 0;
break;
diff --git a/tools/power/cpupower/utils/cpuidle-info.c b/tools/power/cpupower/utils/cpuidle-info.c
index 70da357..b028267 100644
--- a/tools/power/cpupower/utils/cpuidle-info.c
+++ b/tools/power/cpupower/utils/cpuidle-info.c
@@ -139,30 +139,14 @@
}
}
-/* --freq / -f */
-
-void idle_info_help(void)
-{
- printf(_ ("Usage: cpupower idleinfo [options]\n"));
- printf(_ ("Options:\n"));
- printf(_ (" -s, --silent Only show general C-state information\n"));
- printf(_ (" -o, --proc Prints out information like provided by the /proc/acpi/processor/*/power\n"
- " interface in older kernels\n"));
- printf(_ (" -h, --help Prints out this screen\n"));
-
- printf("\n");
-}
-
static struct option info_opts[] = {
{ .name = "silent", .has_arg = no_argument, .flag = NULL, .val = 's'},
{ .name = "proc", .has_arg = no_argument, .flag = NULL, .val = 'o'},
- { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'},
{ },
};
static inline void cpuidle_exit(int fail)
{
- idle_info_help();
exit(EXIT_FAILURE);
}
@@ -174,7 +158,7 @@
unsigned int cpu = 0;
do {
- ret = getopt_long(argc, argv, "hos", info_opts, NULL);
+ ret = getopt_long(argc, argv, "os", info_opts, NULL);
if (ret == -1)
break;
switch (ret) {
@@ -182,10 +166,6 @@
output_param = '?';
cont = 0;
break;
- case 'h':
- output_param = 'h';
- cont = 0;
- break;
case 's':
verbose = 0;
break;
@@ -211,8 +191,6 @@
case '?':
printf(_("invalid or unknown argument\n"));
cpuidle_exit(EXIT_FAILURE);
- case 'h':
- cpuidle_exit(EXIT_SUCCESS);
}
/* Default is: show output of CPU 0 only */
diff --git a/tools/power/cpupower/utils/cpupower-info.c b/tools/power/cpupower/utils/cpupower-info.c
index 85253cb..3f68632 100644
--- a/tools/power/cpupower/utils/cpupower-info.c
+++ b/tools/power/cpupower/utils/cpupower-info.c
@@ -16,31 +16,16 @@
#include "helpers/helpers.h"
#include "helpers/sysfs.h"
-void info_help(void)
-{
- printf(_("Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"));
- printf(_("Options:\n"));
- printf(_(" -b, --perf-bias Gets CPU's power vs performance policy on some\n"
- " Intel models [0-15], see manpage for details\n"));
- printf(_(" -m, --sched-mc Gets the kernel's multi core scheduler policy.\n"));
- printf(_(" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n"));
- printf(_(" -h, --help Prints out this screen\n"));
- printf(_("\nPassing no option will show all info, by default only on core 0\n"));
- printf("\n");
-}
-
static struct option set_opts[] = {
{ .name = "perf-bias", .has_arg = optional_argument, .flag = NULL, .val = 'b'},
{ .name = "sched-mc", .has_arg = optional_argument, .flag = NULL, .val = 'm'},
{ .name = "sched-smt", .has_arg = optional_argument, .flag = NULL, .val = 's'},
- { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'},
{ },
};
static void print_wrong_arg_exit(void)
{
printf(_("invalid or unknown argument\n"));
- info_help();
exit(EXIT_FAILURE);
}
@@ -64,11 +49,8 @@
textdomain(PACKAGE);
/* parameter parsing */
- while ((ret = getopt_long(argc, argv, "msbh", set_opts, NULL)) != -1) {
+ while ((ret = getopt_long(argc, argv, "msb", set_opts, NULL)) != -1) {
switch (ret) {
- case 'h':
- info_help();
- return 0;
case 'b':
if (params.perf_bias)
print_wrong_arg_exit();
diff --git a/tools/power/cpupower/utils/cpupower-set.c b/tools/power/cpupower/utils/cpupower-set.c
index bc1b391..dc4de37 100644
--- a/tools/power/cpupower/utils/cpupower-set.c
+++ b/tools/power/cpupower/utils/cpupower-set.c
@@ -17,30 +17,16 @@
#include "helpers/sysfs.h"
#include "helpers/bitmask.h"
-void set_help(void)
-{
- printf(_("Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"));
- printf(_("Options:\n"));
- printf(_(" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n"
- " Intel models [0-15], see manpage for details\n"));
- printf(_(" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n"));
- printf(_(" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler policy.\n"));
- printf(_(" -h, --help Prints out this screen\n"));
- printf("\n");
-}
-
static struct option set_opts[] = {
{ .name = "perf-bias", .has_arg = optional_argument, .flag = NULL, .val = 'b'},
{ .name = "sched-mc", .has_arg = optional_argument, .flag = NULL, .val = 'm'},
{ .name = "sched-smt", .has_arg = optional_argument, .flag = NULL, .val = 's'},
- { .name = "help", .has_arg = no_argument, .flag = NULL, .val = 'h'},
{ },
};
static void print_wrong_arg_exit(void)
{
printf(_("invalid or unknown argument\n"));
- set_help();
exit(EXIT_FAILURE);
}
@@ -66,12 +52,9 @@
params.params = 0;
/* parameter parsing */
- while ((ret = getopt_long(argc, argv, "m:s:b:h",
+ while ((ret = getopt_long(argc, argv, "m:s:b:",
set_opts, NULL)) != -1) {
switch (ret) {
- case 'h':
- set_help();
- return 0;
case 'b':
if (params.perf_bias)
print_wrong_arg_exit();
@@ -110,10 +93,8 @@
}
};
- if (!params.params) {
- set_help();
- return -EINVAL;
- }
+ if (!params.params)
+ print_wrong_arg_exit();
if (params.sched_mc) {
ret = sysfs_set_sched("mc", sched_mc);
diff --git a/tools/power/cpupower/utils/cpupower.c b/tools/power/cpupower/utils/cpupower.c
index 5844ae0..52bee59 100644
--- a/tools/power/cpupower/utils/cpupower.c
+++ b/tools/power/cpupower/utils/cpupower.c
@@ -11,6 +11,7 @@
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
+#include <errno.h>
#include "builtin.h"
#include "helpers/helpers.h"
@@ -19,13 +20,12 @@
struct cmd_struct {
const char *cmd;
int (*main)(int, const char **);
- void (*usage)(void);
int needs_root;
};
#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
-int cmd_help(int argc, const char **argv);
+static int cmd_help(int argc, const char **argv);
/* Global cpu_info object available for all binaries
* Info only retrieved from CPU 0
@@ -44,55 +44,66 @@
static void print_help(void);
static struct cmd_struct commands[] = {
- { "frequency-info", cmd_freq_info, freq_info_help, 0 },
- { "frequency-set", cmd_freq_set, freq_set_help, 1 },
- { "idle-info", cmd_idle_info, idle_info_help, 0 },
- { "set", cmd_set, set_help, 1 },
- { "info", cmd_info, info_help, 0 },
- { "monitor", cmd_monitor, monitor_help, 0 },
- { "help", cmd_help, print_help, 0 },
- /* { "bench", cmd_bench, NULL, 1 }, */
+ { "frequency-info", cmd_freq_info, 0 },
+ { "frequency-set", cmd_freq_set, 1 },
+ { "idle-info", cmd_idle_info, 0 },
+ { "set", cmd_set, 1 },
+ { "info", cmd_info, 0 },
+ { "monitor", cmd_monitor, 0 },
+ { "help", cmd_help, 0 },
+ /* { "bench", cmd_bench, 1 }, */
};
-int cmd_help(int argc, const char **argv)
-{
- unsigned int i;
-
- if (argc > 1) {
- for (i = 0; i < ARRAY_SIZE(commands); i++) {
- struct cmd_struct *p = commands + i;
- if (strcmp(p->cmd, argv[1]))
- continue;
- if (p->usage) {
- p->usage();
- return EXIT_SUCCESS;
- }
- }
- }
- print_help();
- if (argc == 1)
- return EXIT_SUCCESS; /* cpupower help */
- return EXIT_FAILURE;
-}
-
static void print_help(void)
{
unsigned int i;
#ifdef DEBUG
- printf(_("cpupower [ -d ][ -c cpulist ] subcommand [ARGS]\n"));
- printf(_(" -d, --debug May increase output (stderr) on some subcommands\n"));
+ printf(_("Usage:\tcpupower [-d|--debug] [-c|--cpu cpulist ] <command> [<args>]\n"));
#else
- printf(_("cpupower [ -c cpulist ] subcommand [ARGS]\n"));
+ printf(_("Usage:\tcpupower [-c|--cpu cpulist ] <command> [<args>]\n"));
#endif
- printf(_("cpupower --version\n"));
- printf(_("Supported subcommands are:\n"));
+ printf(_("Supported commands are:\n"));
for (i = 0; i < ARRAY_SIZE(commands); i++)
printf("\t%s\n", commands[i].cmd);
- printf(_("\nSome subcommands can make use of the -c cpulist option.\n"));
- printf(_("Look at the general cpupower manpage how to use it\n"));
- printf(_("and read up the subcommand's manpage whether it is supported.\n"));
- printf(_("\nUse cpupower help subcommand for getting help for above subcommands.\n"));
+ printf(_("\nNot all commands can make use of the -c cpulist option.\n"));
+ printf(_("\nUse 'cpupower help <command>' for getting help for above commands.\n"));
+}
+
+static int print_man_page(const char *subpage)
+{
+ int len;
+ char *page;
+
+ len = 10; /* enough for "cpupower-" */
+ if (subpage != NULL)
+ len += strlen(subpage);
+
+ page = malloc(len);
+ if (!page)
+ return -ENOMEM;
+
+ sprintf(page, "cpupower");
+ if ((subpage != NULL) && strcmp(subpage, "help")) {
+ strcat(page, "-");
+ strcat(page, subpage);
+ }
+
+ execlp("man", "man", page, NULL);
+
+ /* should not be reached */
+ return -EINVAL;
+}
+
+static int cmd_help(int argc, const char **argv)
+{
+ if (argc > 1) {
+ print_man_page(argv[1]); /* exits within execlp() */
+ return EXIT_FAILURE;
+ }
+
+ print_help();
+ return EXIT_SUCCESS;
}
static void print_version(void)
diff --git a/tools/power/cpupower/utils/helpers/helpers.h b/tools/power/cpupower/utils/helpers/helpers.h
index 592ee36..2747e73 100644
--- a/tools/power/cpupower/utils/helpers/helpers.h
+++ b/tools/power/cpupower/utils/helpers/helpers.h
@@ -16,11 +16,20 @@
#include "helpers/bitmask.h"
/* Internationalization ****************************/
+#ifdef NLS
+
#define _(String) gettext(String)
#ifndef gettext_noop
#define gettext_noop(String) String
#endif
#define N_(String) gettext_noop(String)
+
+#else /* !NLS */
+
+#define _(String) String
+#define N_(String) String
+
+#endif
/* Internationalization ****************************/
extern int run_as_root;
@@ -96,6 +105,9 @@
int pkg;
int core;
int cpu;
+
+ /* flags */
+ unsigned int is_online:1;
} *core_info;
};
diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c
index 55e2466..c634302 100644
--- a/tools/power/cpupower/utils/helpers/sysfs.c
+++ b/tools/power/cpupower/utils/helpers/sysfs.c
@@ -56,6 +56,56 @@
return (unsigned int) numwrite;
}
+/*
+ * Detect whether a CPU is online
+ *
+ * Returns:
+ * 1 -> if CPU is online
+ * 0 -> if CPU is offline
+ * negative errno values in error case
+ */
+int sysfs_is_cpu_online(unsigned int cpu)
+{
+ char path[SYSFS_PATH_MAX];
+ int fd;
+ ssize_t numread;
+ unsigned long long value;
+ char linebuf[MAX_LINE_LEN];
+ char *endp;
+ struct stat statbuf;
+
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u", cpu);
+
+ if (stat(path, &statbuf) != 0)
+ return 0;
+
+ /*
+ * kernel without CONFIG_HOTPLUG_CPU
+ * -> cpuX directory exists, but not cpuX/online file
+ */
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/online", cpu);
+ if (stat(path, &statbuf) != 0)
+ return 1;
+
+ fd = open(path, O_RDONLY);
+ if (fd == -1)
+ return -errno;
+
+ numread = read(fd, linebuf, MAX_LINE_LEN - 1);
+ if (numread < 1) {
+ close(fd);
+ return -EIO;
+ }
+ linebuf[numread] = '\0';
+ close(fd);
+
+ value = strtoull(linebuf, &endp, 0);
+ if (value > 1 || value < 0)
+ return -EINVAL;
+
+ return value;
+}
+
/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */
/*
diff --git a/tools/power/cpupower/utils/helpers/sysfs.h b/tools/power/cpupower/utils/helpers/sysfs.h
index f9373e0..8cb797b 100644
--- a/tools/power/cpupower/utils/helpers/sysfs.h
+++ b/tools/power/cpupower/utils/helpers/sysfs.h
@@ -7,6 +7,8 @@
extern unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen);
+extern int sysfs_is_cpu_online(unsigned int cpu);
+
extern unsigned long sysfs_get_idlestate_latency(unsigned int cpu,
unsigned int idlestate);
extern unsigned long sysfs_get_idlestate_usage(unsigned int cpu,
diff --git a/tools/power/cpupower/utils/helpers/topology.c b/tools/power/cpupower/utils/helpers/topology.c
index 385ee5c..4eae2c4 100644
--- a/tools/power/cpupower/utils/helpers/topology.c
+++ b/tools/power/cpupower/utils/helpers/topology.c
@@ -41,6 +41,8 @@
unsigned int pkg;
unsigned int thread;
unsigned int cpu;
+ /* flags */
+ unsigned int is_online:1;
};
static int __compare(const void *t1, const void *t2)
@@ -78,6 +80,8 @@
return -ENOMEM;
cpu_top->pkgs = cpu_top->cores = 0;
for (cpu = 0; cpu < cpus; cpu++) {
+ cpu_top->core_info[cpu].cpu = cpu;
+ cpu_top->core_info[cpu].is_online = sysfs_is_cpu_online(cpu);
cpu_top->core_info[cpu].pkg =
sysfs_topology_read_file(cpu, "physical_package_id");
if ((int)cpu_top->core_info[cpu].pkg != -1 &&
@@ -85,7 +89,6 @@
cpu_top->pkgs = cpu_top->core_info[cpu].pkg;
cpu_top->core_info[cpu].core =
sysfs_topology_read_file(cpu, "core_id");
- cpu_top->core_info[cpu].cpu = cpu;
}
cpu_top->pkgs++;
diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
index d048b96..bcd22a1 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
@@ -134,7 +134,7 @@
/* Assume idle state count is the same for all CPUs */
cpuidle_sysfs_monitor.hw_states_num = sysfs_get_idlestate_count(0);
- if (cpuidle_sysfs_monitor.hw_states_num == 0)
+ if (cpuidle_sysfs_monitor.hw_states_num <= 0)
return NULL;
for (num = 0; num < cpuidle_sysfs_monitor.hw_states_num; num++) {
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
index ba4bf06..0d6571e 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
@@ -43,6 +43,12 @@
/* ToDo: Document this in the manpage */
static char range_abbr[RANGE_MAX] = { 'T', 'C', 'P', 'M', };
+static void print_wrong_arg_exit(void)
+{
+ printf(_("invalid or unknown argument\n"));
+ exit(EXIT_FAILURE);
+}
+
long long timespec_diff_us(struct timespec start, struct timespec end)
{
struct timespec temp;
@@ -56,21 +62,6 @@
return (temp.tv_sec * 1000000) + (temp.tv_nsec / 1000);
}
-void monitor_help(void)
-{
- printf(_("cpupower monitor: [-m <mon1>,[<mon2>],.. ] command\n"));
- printf(_("cpupower monitor: [-m <mon1>,[<mon2>],.. ] [ -i interval_sec ]\n"));
- printf(_("cpupower monitor: -l\n"));
- printf(_("\t command: pass an arbitrary command to measure specific workload\n"));
- printf(_("\t -i: time intervall to measure for in seconds (default 1)\n"));
- printf(_("\t -l: list available CPU sleep monitors (for use with -m)\n"));
- printf(_("\t -m: show specific CPU sleep monitors only (in same order)\n"));
- printf(_("\t -h: print this help\n"));
- printf("\n");
- printf(_("only one of: -l, -m are allowed\nIf none of them is passed,"));
- printf(_(" all supported monitors are shown\n"));
-}
-
void print_n_spaces(int n)
{
int x;
@@ -149,6 +140,10 @@
unsigned long long result;
cstate_t s;
+ /* Be careful CPUs may got resorted for pkg value do not just use cpu */
+ if (!bitmask_isbitset(cpus_chosen, cpu_top.core_info[cpu].cpu))
+ return;
+
if (topology_depth > 2)
printf("%4d|", cpu_top.core_info[cpu].pkg);
if (topology_depth > 1)
@@ -190,9 +185,13 @@
}
}
}
- /* cpu offline */
- if (cpu_top.core_info[cpu].pkg == -1 ||
- cpu_top.core_info[cpu].core == -1) {
+ /*
+ * The monitor could still provide useful data, for example
+ * AMD HW counters partly sit in PCI config space.
+ * It's up to the monitor plug-in to check .is_online, this one
+ * is just for additional info.
+ */
+ if (!cpu_top.core_info[cpu].is_online) {
printf(_(" *is offline\n"));
return;
} else
@@ -238,7 +237,6 @@
if (hits == 0) {
printf(_("No matching monitor found in %s, "
"try -l option\n"), param);
- monitor_help();
exit(EXIT_FAILURE);
}
/* Override detected/registerd monitors array with requested one */
@@ -335,37 +333,27 @@
int opt;
progname = basename(argv[0]);
- while ((opt = getopt(argc, argv, "+hli:m:")) != -1) {
+ while ((opt = getopt(argc, argv, "+li:m:")) != -1) {
switch (opt) {
- case 'h':
- monitor_help();
- exit(EXIT_SUCCESS);
case 'l':
- if (mode) {
- monitor_help();
- exit(EXIT_FAILURE);
- }
+ if (mode)
+ print_wrong_arg_exit();
mode = list;
break;
case 'i':
/* only allow -i with -m or no option */
- if (mode && mode != show) {
- monitor_help();
- exit(EXIT_FAILURE);
- }
+ if (mode && mode != show)
+ print_wrong_arg_exit();
interval = atoi(optarg);
break;
case 'm':
- if (mode) {
- monitor_help();
- exit(EXIT_FAILURE);
- }
+ if (mode)
+ print_wrong_arg_exit();
mode = show;
show_monitors_param = optarg;
break;
default:
- monitor_help();
- exit(EXIT_FAILURE);
+ print_wrong_arg_exit();
}
}
if (!mode)
@@ -385,6 +373,10 @@
return EXIT_FAILURE;
}
+ /* Default is: monitor all CPUs */
+ if (bitmask_isallclear(cpus_chosen))
+ bitmask_setall(cpus_chosen);
+
dprint("System has up to %d CPU cores\n", cpu_count);
for (num = 0; all_monitors[num]; num++) {
diff --git a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
index 63ca87a..5650ab5 100644
--- a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
+++ b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
@@ -22,12 +22,15 @@
#define MSR_TSC 0x10
+#define MSR_AMD_HWCR 0xc0010015
+
enum mperf_id { C0 = 0, Cx, AVG_FREQ, MPERF_CSTATE_COUNT };
static int mperf_get_count_percent(unsigned int self_id, double *percent,
unsigned int cpu);
static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
unsigned int cpu);
+static struct timespec time_start, time_end;
static cstate_t mperf_cstates[MPERF_CSTATE_COUNT] = {
{
@@ -54,19 +57,33 @@
},
};
+enum MAX_FREQ_MODE { MAX_FREQ_SYSFS, MAX_FREQ_TSC_REF };
+static int max_freq_mode;
+/*
+ * The max frequency mperf is ticking at (in C0), either retrieved via:
+ * 1) calculated after measurements if we know TSC ticks at mperf/P0 frequency
+ * 2) cpufreq /sys/devices/.../cpu0/cpufreq/cpuinfo_max_freq at init time
+ * 1. Is preferred as it also works without cpufreq subsystem (e.g. on Xen)
+ */
+static unsigned long max_frequency;
+
static unsigned long long tsc_at_measure_start;
static unsigned long long tsc_at_measure_end;
-static unsigned long max_frequency;
static unsigned long long *mperf_previous_count;
static unsigned long long *aperf_previous_count;
static unsigned long long *mperf_current_count;
static unsigned long long *aperf_current_count;
+
/* valid flag for all CPUs. If a MSR read failed it will be zero */
static int *is_valid;
static int mperf_get_tsc(unsigned long long *tsc)
{
- return read_msr(0, MSR_TSC, tsc);
+ int ret;
+ ret = read_msr(0, MSR_TSC, tsc);
+ if (ret)
+ dprint("Reading TSC MSR failed, returning %llu\n", *tsc);
+ return ret;
}
static int mperf_init_stats(unsigned int cpu)
@@ -97,36 +114,11 @@
return 0;
}
-/*
- * get_average_perf()
- *
- * Returns the average performance (also considers boosted frequencies)
- *
- * Input:
- * aperf_diff: Difference of the aperf register over a time period
- * mperf_diff: Difference of the mperf register over the same time period
- * max_freq: Maximum frequency (P0)
- *
- * Returns:
- * Average performance over the time period
- */
-static unsigned long get_average_perf(unsigned long long aperf_diff,
- unsigned long long mperf_diff)
-{
- unsigned int perf_percent = 0;
- if (((unsigned long)(-1) / 100) < aperf_diff) {
- int shift_count = 7;
- aperf_diff >>= shift_count;
- mperf_diff >>= shift_count;
- }
- perf_percent = (aperf_diff * 100) / mperf_diff;
- return (max_frequency * perf_percent) / 100;
-}
-
static int mperf_get_count_percent(unsigned int id, double *percent,
unsigned int cpu)
{
unsigned long long aperf_diff, mperf_diff, tsc_diff;
+ unsigned long long timediff;
if (!is_valid[cpu])
return -1;
@@ -136,11 +128,19 @@
mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu];
aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
- tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
- *percent = 100.0 * mperf_diff / tsc_diff;
- dprint("%s: mperf_diff: %llu, tsc_diff: %llu\n",
- mperf_cstates[id].name, mperf_diff, tsc_diff);
+ if (max_freq_mode == MAX_FREQ_TSC_REF) {
+ tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
+ *percent = 100.0 * mperf_diff / tsc_diff;
+ dprint("%s: TSC Ref - mperf_diff: %llu, tsc_diff: %llu\n",
+ mperf_cstates[id].name, mperf_diff, tsc_diff);
+ } else if (max_freq_mode == MAX_FREQ_SYSFS) {
+ timediff = timespec_diff_us(time_start, time_end);
+ *percent = 100.0 * mperf_diff / timediff;
+ dprint("%s: MAXFREQ - mperf_diff: %llu, time_diff: %llu\n",
+ mperf_cstates[id].name, mperf_diff, timediff);
+ } else
+ return -1;
if (id == Cx)
*percent = 100.0 - *percent;
@@ -154,7 +154,7 @@
static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
unsigned int cpu)
{
- unsigned long long aperf_diff, mperf_diff;
+ unsigned long long aperf_diff, mperf_diff, time_diff, tsc_diff;
if (id != AVG_FREQ)
return 1;
@@ -165,11 +165,21 @@
mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu];
aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
- /* Return MHz for now, might want to return KHz if column width is more
- generic */
- *count = get_average_perf(aperf_diff, mperf_diff) / 1000;
- dprint("%s: %llu\n", mperf_cstates[id].name, *count);
+ if (max_freq_mode == MAX_FREQ_TSC_REF) {
+ /* Calculate max_freq from TSC count */
+ tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
+ time_diff = timespec_diff_us(time_start, time_end);
+ max_frequency = tsc_diff / time_diff;
+ }
+ *count = max_frequency * ((double)aperf_diff / mperf_diff);
+ dprint("%s: Average freq based on %s maximum frequency:\n",
+ mperf_cstates[id].name,
+ (max_freq_mode == MAX_FREQ_TSC_REF) ? "TSC calculated" : "sysfs read");
+ dprint("%max_frequency: %lu", max_frequency);
+ dprint("aperf_diff: %llu\n", aperf_diff);
+ dprint("mperf_diff: %llu\n", mperf_diff);
+ dprint("avg freq: %llu\n", *count);
return 0;
}
@@ -178,6 +188,7 @@
int cpu;
unsigned long long dbg;
+ clock_gettime(CLOCK_REALTIME, &time_start);
mperf_get_tsc(&tsc_at_measure_start);
for (cpu = 0; cpu < cpu_count; cpu++)
@@ -193,32 +204,104 @@
unsigned long long dbg;
int cpu;
- mperf_get_tsc(&tsc_at_measure_end);
-
for (cpu = 0; cpu < cpu_count; cpu++)
mperf_measure_stats(cpu);
+ mperf_get_tsc(&tsc_at_measure_end);
+ clock_gettime(CLOCK_REALTIME, &time_end);
+
mperf_get_tsc(&dbg);
dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end);
return 0;
}
-struct cpuidle_monitor mperf_monitor;
-
-struct cpuidle_monitor *mperf_register(void)
+/*
+ * Mperf register is defined to tick at P0 (maximum) frequency
+ *
+ * Instead of reading out P0 which can be tricky to read out from HW,
+ * we use TSC counter if it reliably ticks at P0/mperf frequency.
+ *
+ * Still try to fall back to:
+ * /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
+ * on older Intel HW without invariant TSC feature.
+ * Or on AMD machines where TSC does not tick at P0 (do not exist yet, but
+ * it's still double checked (MSR_AMD_HWCR)).
+ *
+ * On these machines the user would still get useful mperf
+ * stats when acpi-cpufreq driver is loaded.
+ */
+static int init_maxfreq_mode(void)
{
+ int ret;
+ unsigned long long hwcr;
unsigned long min;
- if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF))
- return NULL;
+ if (!cpupower_cpu_info.caps & CPUPOWER_CAP_INV_TSC)
+ goto use_sysfs;
- /* Assume min/max all the same on all cores */
+ if (cpupower_cpu_info.vendor == X86_VENDOR_AMD) {
+ /* MSR_AMD_HWCR tells us whether TSC runs at P0/mperf
+ * freq.
+ * A test whether hwcr is accessable/available would be:
+ * (cpupower_cpu_info.family > 0x10 ||
+ * cpupower_cpu_info.family == 0x10 &&
+ * cpupower_cpu_info.model >= 0x2))
+ * This should be the case for all aperf/mperf
+ * capable AMD machines and is therefore safe to test here.
+ * Compare with Linus kernel git commit: acf01734b1747b1ec4
+ */
+ ret = read_msr(0, MSR_AMD_HWCR, &hwcr);
+ /*
+ * If the MSR read failed, assume a Xen system that did
+ * not explicitly provide access to it and assume TSC works
+ */
+ if (ret != 0) {
+ dprint("TSC read 0x%x failed - assume TSC working\n",
+ MSR_AMD_HWCR);
+ return 0;
+ } else if (1 & (hwcr >> 24)) {
+ max_freq_mode = MAX_FREQ_TSC_REF;
+ return 0;
+ } else { /* Use sysfs max frequency if available */ }
+ } else if (cpupower_cpu_info.vendor == X86_VENDOR_INTEL) {
+ /*
+ * On Intel we assume mperf (in C0) is ticking at same
+ * rate than TSC
+ */
+ max_freq_mode = MAX_FREQ_TSC_REF;
+ return 0;
+ }
+use_sysfs:
if (cpufreq_get_hardware_limits(0, &min, &max_frequency)) {
dprint("Cannot retrieve max freq from cpufreq kernel "
"subsystem\n");
- return NULL;
+ return -1;
}
+ max_freq_mode = MAX_FREQ_SYSFS;
+ return 0;
+}
+
+/*
+ * This monitor provides:
+ *
+ * 1) Average frequency a CPU resided in
+ * This always works if the CPU has aperf/mperf capabilities
+ *
+ * 2) C0 and Cx (any sleep state) time a CPU resided in
+ * Works if mperf timer stops ticking in sleep states which
+ * seem to be the case on all current HW.
+ * Both is directly retrieved from HW registers and is independent
+ * from kernel statistics.
+ */
+struct cpuidle_monitor mperf_monitor;
+struct cpuidle_monitor *mperf_register(void)
+{
+ if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF))
+ return NULL;
+
+ if (init_maxfreq_mode())
+ return NULL;
/* Free this at program termination */
is_valid = calloc(cpu_count, sizeof(int));
