| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm SC7280 Display MDSS |
| |
| maintainers: |
| - Krishna Manikandan <quic_mkrishn@quicinc.com> |
| |
| description: |
| Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates |
| sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree |
| bindings of MDSS are mentioned for SC7280. |
| |
| $ref: /schemas/display/msm/mdss-common.yaml# |
| |
| properties: |
| compatible: |
| const: qcom,sc7280-mdss |
| |
| clocks: |
| items: |
| - description: Display AHB clock from gcc |
| - description: Display AHB clock from dispcc |
| - description: Display core clock |
| |
| clock-names: |
| items: |
| - const: iface |
| - const: ahb |
| - const: core |
| |
| iommus: |
| maxItems: 1 |
| |
| interconnects: |
| items: |
| - description: Interconnect path from mdp0 port to the data bus |
| - description: Interconnect path from CPU to the reg bus |
| |
| interconnect-names: |
| items: |
| - const: mdp0-mem |
| - const: cpu-cfg |
| |
| patternProperties: |
| "^display-controller@[0-9a-f]+$": |
| type: object |
| additionalProperties: true |
| |
| properties: |
| compatible: |
| const: qcom,sc7280-dpu |
| |
| "^displayport-controller@[0-9a-f]+$": |
| type: object |
| additionalProperties: true |
| |
| properties: |
| compatible: |
| const: qcom,sc7280-dp |
| |
| "^dsi@[0-9a-f]+$": |
| type: object |
| additionalProperties: true |
| |
| properties: |
| compatible: |
| items: |
| - const: qcom,sc7280-dsi-ctrl |
| - const: qcom,mdss-dsi-ctrl |
| |
| "^edp@[0-9a-f]+$": |
| type: object |
| additionalProperties: true |
| |
| properties: |
| compatible: |
| const: qcom,sc7280-edp |
| |
| "^phy@[0-9a-f]+$": |
| type: object |
| additionalProperties: true |
| |
| properties: |
| compatible: |
| enum: |
| - qcom,sc7280-dsi-phy-7nm |
| - qcom,sc7280-edp-phy |
| |
| required: |
| - compatible |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/qcom,dispcc-sc7280.h> |
| #include <dt-bindings/clock/qcom,gcc-sc7280.h> |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interconnect/qcom,sc7280.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| |
| display-subsystem@ae00000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "qcom,sc7280-mdss"; |
| reg = <0xae00000 0x1000>; |
| reg-names = "mdss"; |
| power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; |
| clocks = <&gcc GCC_DISP_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>; |
| clock-names = "iface", |
| "ahb", |
| "core"; |
| |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>, |
| <&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_DISPLAY_CFG>; |
| interconnect-names = "mdp0-mem", |
| "cpu-cfg"; |
| |
| iommus = <&apps_smmu 0x900 0x402>; |
| ranges; |
| |
| display-controller@ae01000 { |
| compatible = "qcom,sc7280-dpu"; |
| reg = <0x0ae01000 0x8f000>, |
| <0x0aeb0000 0x2008>; |
| |
| reg-names = "mdp", "vbif"; |
| |
| clocks = <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&gcc GCC_DISP_SF_AXI_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>, |
| <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| clock-names = "bus", |
| "nrt_bus", |
| "iface", |
| "lut", |
| "core", |
| "vsync"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <0>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| operating-points-v2 = <&mdp_opp_table>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| dpu_intf1_out: endpoint { |
| remote-endpoint = <&dsi0_in>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| dpu_intf5_out: endpoint { |
| remote-endpoint = <&edp_in>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| dpu_intf0_out: endpoint { |
| remote-endpoint = <&dp_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| dsi@ae94000 { |
| compatible = "qcom,sc7280-dsi-ctrl", "qcom,mdss-dsi-ctrl"; |
| reg = <0x0ae94000 0x400>; |
| reg-names = "dsi_ctrl"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <4>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, |
| <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_PCLK0_CLK>, |
| <&dispcc DISP_CC_MDSS_ESC0_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>; |
| clock-names = "byte", |
| "byte_intf", |
| "pixel", |
| "core", |
| "iface", |
| "bus"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>; |
| |
| operating-points-v2 = <&dsi_opp_table>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| |
| phys = <&mdss_dsi_phy>; |
| phy-names = "dsi"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| dsi0_in: endpoint { |
| remote-endpoint = <&dpu_intf1_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| dsi0_out: endpoint { |
| }; |
| }; |
| }; |
| |
| dsi_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-187500000 { |
| opp-hz = /bits/ 64 <187500000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-300000000 { |
| opp-hz = /bits/ 64 <300000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-358000000 { |
| opp-hz = /bits/ 64 <358000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| }; |
| }; |
| |
| mdss_dsi_phy: phy@ae94400 { |
| compatible = "qcom,sc7280-dsi-phy-7nm"; |
| reg = <0x0ae94400 0x200>, |
| <0x0ae94600 0x280>, |
| <0x0ae94900 0x280>; |
| reg-names = "dsi_phy", |
| "dsi_phy_lane", |
| "dsi_pll"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", "ref"; |
| |
| vdds-supply = <&vreg_dsi_supply>; |
| }; |
| |
| edp@aea0000 { |
| compatible = "qcom,sc7280-edp"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&edp_hot_plug_det>; |
| |
| reg = <0xaea0000 0x200>, |
| <0xaea0200 0x200>, |
| <0xaea0400 0xc00>, |
| <0xaea1000 0x400>; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <14>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, |
| <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, |
| <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; |
| clock-names = "core_iface", |
| "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", |
| "stream_pixel"; |
| assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; |
| assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; |
| |
| phys = <&mdss_edp_phy>; |
| phy-names = "dp"; |
| |
| operating-points-v2 = <&edp_opp_table>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| edp_in: endpoint { |
| remote-endpoint = <&dpu_intf5_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| mdss_edp_out: endpoint { }; |
| }; |
| }; |
| |
| edp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss_edp_phy: phy@aec2a00 { |
| compatible = "qcom,sc7280-edp-phy"; |
| |
| reg = <0xaec2a00 0x19c>, |
| <0xaec2200 0xa0>, |
| <0xaec2600 0xa0>, |
| <0xaec2000 0x1c0>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_EDP_CLKREF_EN>; |
| clock-names = "aux", |
| "cfg_ahb"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| }; |
| |
| displayport-controller@ae90000 { |
| compatible = "qcom,sc7280-dp"; |
| |
| reg = <0xae90000 0x200>, |
| <0xae90200 0x200>, |
| <0xae90400 0xc00>, |
| <0xae91000 0x400>, |
| <0xae91400 0x400>; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <12>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, |
| <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, |
| <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; |
| clock-names = "core_iface", |
| "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", |
| "stream_pixel"; |
| assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; |
| assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>; |
| phys = <&dp_phy>; |
| phy-names = "dp"; |
| |
| operating-points-v2 = <&dp_opp_table>; |
| power-domains = <&rpmhpd SC7280_CX>; |
| |
| #sound-dai-cells = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| dp_in: endpoint { |
| remote-endpoint = <&dpu_intf0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| dp_out: endpoint { }; |
| }; |
| }; |
| |
| dp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-160000000 { |
| opp-hz = /bits/ 64 <160000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| }; |
| ... |
