| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved. |
| * |
| * Description: |
| * MPC832xE MDS board specific routines. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/reboot.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/major.h> |
| #include <linux/console.h> |
| #include <linux/delay.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| #include <linux/initrd.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_device.h> |
| |
| #include <linux/atomic.h> |
| #include <asm/time.h> |
| #include <asm/io.h> |
| #include <asm/machdep.h> |
| #include <asm/ipic.h> |
| #include <asm/irq.h> |
| #include <asm/udbg.h> |
| #include <sysdev/fsl_soc.h> |
| #include <sysdev/fsl_pci.h> |
| #include <soc/fsl/qe/qe.h> |
| |
| #include "mpc83xx.h" |
| |
| #undef DEBUG |
| #ifdef DEBUG |
| #define DBG(fmt...) udbg_printf(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| /* ************************************************************************ |
| * |
| * Setup the architecture |
| * |
| */ |
| static void __init mpc832x_sys_setup_arch(void) |
| { |
| struct device_node *np; |
| u8 __iomem *bcsr_regs = NULL; |
| |
| mpc83xx_setup_arch(); |
| |
| /* Map BCSR area */ |
| np = of_find_node_by_name(NULL, "bcsr"); |
| if (np) { |
| struct resource res; |
| |
| of_address_to_resource(np, 0, &res); |
| bcsr_regs = ioremap(res.start, resource_size(&res)); |
| of_node_put(np); |
| } |
| |
| #ifdef CONFIG_QUICC_ENGINE |
| if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { |
| par_io_init(np); |
| of_node_put(np); |
| |
| for_each_node_by_name(np, "ucc") |
| par_io_of_config(np); |
| } |
| |
| if ((np = of_find_compatible_node(NULL, "network", "ucc_geth")) |
| != NULL){ |
| /* Reset the Ethernet PHYs */ |
| #define BCSR8_FETH_RST 0x50 |
| clrbits8(&bcsr_regs[8], BCSR8_FETH_RST); |
| udelay(1000); |
| setbits8(&bcsr_regs[8], BCSR8_FETH_RST); |
| iounmap(bcsr_regs); |
| of_node_put(np); |
| } |
| #endif /* CONFIG_QUICC_ENGINE */ |
| } |
| |
| machine_device_initcall(mpc832x_mds, mpc83xx_declare_of_platform_devices); |
| |
| /* |
| * Called very early, MMU is off, device-tree isn't unflattened |
| */ |
| static int __init mpc832x_sys_probe(void) |
| { |
| return of_machine_is_compatible("MPC832xMDS"); |
| } |
| |
| define_machine(mpc832x_mds) { |
| .name = "MPC832x MDS", |
| .probe = mpc832x_sys_probe, |
| .setup_arch = mpc832x_sys_setup_arch, |
| .discover_phbs = mpc83xx_setup_pci, |
| .init_IRQ = mpc83xx_ipic_init_IRQ, |
| .get_irq = ipic_get_irq, |
| .restart = mpc83xx_restart, |
| .time_init = mpc83xx_time_init, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = udbg_progress, |
| }; |