| /* SPDX-License-Identifier: MIT */ |
| /* |
| * Copyright © 2022 Intel Corporation |
| */ |
| |
| #ifndef __INTEL_BACKLIGHT_REGS_H__ |
| #define __INTEL_BACKLIGHT_REGS_H__ |
| |
| #include "intel_display_reg_defs.h" |
| |
| #define _VLV_BLC_PWM_CTL2_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61250) |
| #define _VLV_BLC_PWM_CTL2_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61350) |
| #define VLV_BLC_PWM_CTL2(pipe) _MMIO_PIPE(pipe, _VLV_BLC_PWM_CTL2_A, \ |
| _VLV_BLC_PWM_CTL2_B) |
| |
| #define _VLV_BLC_PWM_CTL_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61254) |
| #define _VLV_BLC_PWM_CTL_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61354) |
| #define VLV_BLC_PWM_CTL(pipe) _MMIO_PIPE(pipe, _VLV_BLC_PWM_CTL_A, \ |
| _VLV_BLC_PWM_CTL_B) |
| |
| #define _VLV_BLC_HIST_CTL_A (DISPLAY_MMIO_BASE(dev_priv) + 0x61260) |
| #define _VLV_BLC_HIST_CTL_B (DISPLAY_MMIO_BASE(dev_priv) + 0x61360) |
| #define VLV_BLC_HIST_CTL(pipe) _MMIO_PIPE(pipe, _VLV_BLC_HIST_CTL_A, \ |
| _VLV_BLC_HIST_CTL_B) |
| |
| /* Backlight control */ |
| #define BLC_PWM_CTL2 _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61250) /* 965+ only */ |
| #define BLM_PWM_ENABLE (1 << 31) |
| #define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */ |
| #define BLM_PIPE_SELECT (1 << 29) |
| #define BLM_PIPE_SELECT_IVB (3 << 29) |
| #define BLM_PIPE_A (0 << 29) |
| #define BLM_PIPE_B (1 << 29) |
| #define BLM_PIPE_C (2 << 29) /* ivb + */ |
| #define BLM_TRANSCODER_A BLM_PIPE_A /* hsw */ |
| #define BLM_TRANSCODER_B BLM_PIPE_B |
| #define BLM_TRANSCODER_C BLM_PIPE_C |
| #define BLM_TRANSCODER_EDP (3 << 29) |
| #define BLM_PIPE(pipe) ((pipe) << 29) |
| #define BLM_POLARITY_I965 (1 << 28) /* gen4 only */ |
| #define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26) |
| #define BLM_PHASE_IN_ENABLE (1 << 25) |
| #define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24) |
| #define BLM_PHASE_IN_TIME_BASE_SHIFT (16) |
| #define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16) |
| #define BLM_PHASE_IN_COUNT_SHIFT (8) |
| #define BLM_PHASE_IN_COUNT_MASK (0xff << 8) |
| #define BLM_PHASE_IN_INCR_SHIFT (0) |
| #define BLM_PHASE_IN_INCR_MASK (0xff << 0) |
| #define BLC_PWM_CTL _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61254) |
| /* |
| * This is the most significant 15 bits of the number of backlight cycles in a |
| * complete cycle of the modulated backlight control. |
| * |
| * The actual value is this field multiplied by two. |
| */ |
| #define BACKLIGHT_MODULATION_FREQ_SHIFT (17) |
| #define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) |
| #define BLM_LEGACY_MODE (1 << 16) /* gen2 only */ |
| /* |
| * This is the number of cycles out of the backlight modulation cycle for which |
| * the backlight is on. |
| * |
| * This field must be no greater than the number of cycles in the complete |
| * backlight modulation cycle. |
| */ |
| #define BACKLIGHT_DUTY_CYCLE_SHIFT (0) |
| #define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) |
| #define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe) |
| #define BLM_POLARITY_PNV (1 << 0) /* pnv only */ |
| |
| #define BLC_HIST_CTL _MMIO(DISPLAY_MMIO_BASE(dev_priv) + 0x61260) |
| #define BLM_HISTOGRAM_ENABLE (1 << 31) |
| |
| /* New registers for PCH-split platforms. Safe where new bits show up, the |
| * register layout machtes with gen4 BLC_PWM_CTL[12]. */ |
| #define BLC_PWM_CPU_CTL2 _MMIO(0x48250) |
| #define BLC_PWM_CPU_CTL _MMIO(0x48254) |
| |
| #define HSW_BLC_PWM2_CTL _MMIO(0x48350) |
| |
| /* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is |
| * like the normal CTL from gen4 and earlier. Hooray for confusing naming. */ |
| #define BLC_PWM_PCH_CTL1 _MMIO(0xc8250) |
| #define BLM_PCH_PWM_ENABLE (1 << 31) |
| #define BLM_PCH_OVERRIDE_ENABLE (1 << 30) |
| #define BLM_PCH_POLARITY (1 << 29) |
| #define BLC_PWM_PCH_CTL2 _MMIO(0xc8254) |
| |
| /* BXT backlight register definition. */ |
| #define _BXT_BLC_PWM_CTL1 0xC8250 |
| #define BXT_BLC_PWM_ENABLE (1 << 31) |
| #define BXT_BLC_PWM_POLARITY (1 << 29) |
| #define _BXT_BLC_PWM_FREQ1 0xC8254 |
| #define _BXT_BLC_PWM_DUTY1 0xC8258 |
| |
| #define _BXT_BLC_PWM_CTL2 0xC8350 |
| #define _BXT_BLC_PWM_FREQ2 0xC8354 |
| #define _BXT_BLC_PWM_DUTY2 0xC8358 |
| |
| #define BXT_BLC_PWM_CTL(controller) _MMIO_PIPE(controller, \ |
| _BXT_BLC_PWM_CTL1, _BXT_BLC_PWM_CTL2) |
| #define BXT_BLC_PWM_FREQ(controller) _MMIO_PIPE(controller, \ |
| _BXT_BLC_PWM_FREQ1, _BXT_BLC_PWM_FREQ2) |
| #define BXT_BLC_PWM_DUTY(controller) _MMIO_PIPE(controller, \ |
| _BXT_BLC_PWM_DUTY1, _BXT_BLC_PWM_DUTY2) |
| |
| /* Utility pin */ |
| #define UTIL_PIN_CTL _MMIO(0x48400) |
| #define UTIL_PIN_ENABLE (1 << 31) |
| #define UTIL_PIN_PIPE_MASK (3 << 29) |
| #define UTIL_PIN_PIPE(x) ((x) << 29) |
| #define UTIL_PIN_MODE_MASK (0xf << 24) |
| #define UTIL_PIN_MODE_DATA (0 << 24) |
| #define UTIL_PIN_MODE_PWM (1 << 24) |
| #define UTIL_PIN_MODE_VBLANK (4 << 24) |
| #define UTIL_PIN_MODE_VSYNC (5 << 24) |
| #define UTIL_PIN_MODE_EYE_LEVEL (8 << 24) |
| #define UTIL_PIN_OUTPUT_DATA (1 << 23) |
| #define UTIL_PIN_POLARITY (1 << 22) |
| #define UTIL_PIN_DIRECTION_INPUT (1 << 19) |
| #define UTIL_PIN_INPUT_DATA (1 << 16) |
| |
| #endif /* __INTEL_BACKLIGHT_REGS_H__ */ |