| // SPDX-License-Identifier: GPL-2.0-only |
| /* MCP23S08 SPI/I2C GPIO driver */ |
| |
| #include <linux/bitops.h> |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/mutex.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/export.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/slab.h> |
| #include <asm/byteorder.h> |
| #include <linux/interrupt.h> |
| #include <linux/regmap.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| |
| #include "pinctrl-mcp23s08.h" |
| |
| /* Registers are all 8 bits wide. |
| * |
| * The mcp23s17 has twice as many bits, and can be configured to work |
| * with either 16 bit registers or with two adjacent 8 bit banks. |
| */ |
| #define MCP_IODIR 0x00 /* init/reset: all ones */ |
| #define MCP_IPOL 0x01 |
| #define MCP_GPINTEN 0x02 |
| #define MCP_DEFVAL 0x03 |
| #define MCP_INTCON 0x04 |
| #define MCP_IOCON 0x05 |
| # define IOCON_MIRROR (1 << 6) |
| # define IOCON_SEQOP (1 << 5) |
| # define IOCON_HAEN (1 << 3) |
| # define IOCON_ODR (1 << 2) |
| # define IOCON_INTPOL (1 << 1) |
| # define IOCON_INTCC (1) |
| #define MCP_GPPU 0x06 |
| #define MCP_INTF 0x07 |
| #define MCP_INTCAP 0x08 |
| #define MCP_GPIO 0x09 |
| #define MCP_OLAT 0x0a |
| |
| static const struct reg_default mcp23x08_defaults[] = { |
| {.reg = MCP_IODIR, .def = 0xff}, |
| {.reg = MCP_IPOL, .def = 0x00}, |
| {.reg = MCP_GPINTEN, .def = 0x00}, |
| {.reg = MCP_DEFVAL, .def = 0x00}, |
| {.reg = MCP_INTCON, .def = 0x00}, |
| {.reg = MCP_IOCON, .def = 0x00}, |
| {.reg = MCP_GPPU, .def = 0x00}, |
| {.reg = MCP_OLAT, .def = 0x00}, |
| }; |
| |
| static const struct regmap_range mcp23x08_volatile_range = { |
| .range_min = MCP_INTF, |
| .range_max = MCP_GPIO, |
| }; |
| |
| static const struct regmap_access_table mcp23x08_volatile_table = { |
| .yes_ranges = &mcp23x08_volatile_range, |
| .n_yes_ranges = 1, |
| }; |
| |
| static const struct regmap_range mcp23x08_precious_range = { |
| .range_min = MCP_GPIO, |
| .range_max = MCP_GPIO, |
| }; |
| |
| static const struct regmap_access_table mcp23x08_precious_table = { |
| .yes_ranges = &mcp23x08_precious_range, |
| .n_yes_ranges = 1, |
| }; |
| |
| const struct regmap_config mcp23x08_regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .reg_stride = 1, |
| .volatile_table = &mcp23x08_volatile_table, |
| .precious_table = &mcp23x08_precious_table, |
| .reg_defaults = mcp23x08_defaults, |
| .num_reg_defaults = ARRAY_SIZE(mcp23x08_defaults), |
| .cache_type = REGCACHE_FLAT, |
| .max_register = MCP_OLAT, |
| }; |
| EXPORT_SYMBOL_GPL(mcp23x08_regmap); |
| |
| static const struct reg_default mcp23x17_defaults[] = { |
| {.reg = MCP_IODIR << 1, .def = 0xffff}, |
| {.reg = MCP_IPOL << 1, .def = 0x0000}, |
| {.reg = MCP_GPINTEN << 1, .def = 0x0000}, |
| {.reg = MCP_DEFVAL << 1, .def = 0x0000}, |
| {.reg = MCP_INTCON << 1, .def = 0x0000}, |
| {.reg = MCP_IOCON << 1, .def = 0x0000}, |
| {.reg = MCP_GPPU << 1, .def = 0x0000}, |
| {.reg = MCP_OLAT << 1, .def = 0x0000}, |
| }; |
| |
| static const struct regmap_range mcp23x17_volatile_range = { |
| .range_min = MCP_INTF << 1, |
| .range_max = MCP_GPIO << 1, |
| }; |
| |
| static const struct regmap_access_table mcp23x17_volatile_table = { |
| .yes_ranges = &mcp23x17_volatile_range, |
| .n_yes_ranges = 1, |
| }; |
| |
| static const struct regmap_range mcp23x17_precious_range = { |
| .range_min = MCP_INTCAP << 1, |
| .range_max = MCP_GPIO << 1, |
| }; |
| |
| static const struct regmap_access_table mcp23x17_precious_table = { |
| .yes_ranges = &mcp23x17_precious_range, |
| .n_yes_ranges = 1, |
| }; |
| |
| const struct regmap_config mcp23x17_regmap = { |
| .reg_bits = 8, |
| .val_bits = 16, |
| |
| .reg_stride = 2, |
| .max_register = MCP_OLAT << 1, |
| .volatile_table = &mcp23x17_volatile_table, |
| .precious_table = &mcp23x17_precious_table, |
| .reg_defaults = mcp23x17_defaults, |
| .num_reg_defaults = ARRAY_SIZE(mcp23x17_defaults), |
| .cache_type = REGCACHE_FLAT, |
| .val_format_endian = REGMAP_ENDIAN_LITTLE, |
| }; |
| EXPORT_SYMBOL_GPL(mcp23x17_regmap); |
| |
| static int mcp_read(struct mcp23s08 *mcp, unsigned int reg, unsigned int *val) |
| { |
| return regmap_read(mcp->regmap, reg << mcp->reg_shift, val); |
| } |
| |
| static int mcp_write(struct mcp23s08 *mcp, unsigned int reg, unsigned int val) |
| { |
| return regmap_write(mcp->regmap, reg << mcp->reg_shift, val); |
| } |
| |
| static int mcp_set_mask(struct mcp23s08 *mcp, unsigned int reg, |
| unsigned int mask, bool enabled) |
| { |
| u16 val = enabled ? 0xffff : 0x0000; |
| return regmap_update_bits(mcp->regmap, reg << mcp->reg_shift, |
| mask, val); |
| } |
| |
| static int mcp_set_bit(struct mcp23s08 *mcp, unsigned int reg, |
| unsigned int pin, bool enabled) |
| { |
| u16 mask = BIT(pin); |
| return mcp_set_mask(mcp, reg, mask, enabled); |
| } |
| |
| static const struct pinctrl_pin_desc mcp23x08_pins[] = { |
| PINCTRL_PIN(0, "gpio0"), |
| PINCTRL_PIN(1, "gpio1"), |
| PINCTRL_PIN(2, "gpio2"), |
| PINCTRL_PIN(3, "gpio3"), |
| PINCTRL_PIN(4, "gpio4"), |
| PINCTRL_PIN(5, "gpio5"), |
| PINCTRL_PIN(6, "gpio6"), |
| PINCTRL_PIN(7, "gpio7"), |
| }; |
| |
| static const struct pinctrl_pin_desc mcp23x17_pins[] = { |
| PINCTRL_PIN(0, "gpio0"), |
| PINCTRL_PIN(1, "gpio1"), |
| PINCTRL_PIN(2, "gpio2"), |
| PINCTRL_PIN(3, "gpio3"), |
| PINCTRL_PIN(4, "gpio4"), |
| PINCTRL_PIN(5, "gpio5"), |
| PINCTRL_PIN(6, "gpio6"), |
| PINCTRL_PIN(7, "gpio7"), |
| PINCTRL_PIN(8, "gpio8"), |
| PINCTRL_PIN(9, "gpio9"), |
| PINCTRL_PIN(10, "gpio10"), |
| PINCTRL_PIN(11, "gpio11"), |
| PINCTRL_PIN(12, "gpio12"), |
| PINCTRL_PIN(13, "gpio13"), |
| PINCTRL_PIN(14, "gpio14"), |
| PINCTRL_PIN(15, "gpio15"), |
| }; |
| |
| static int mcp_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) |
| { |
| return 0; |
| } |
| |
| static const char *mcp_pinctrl_get_group_name(struct pinctrl_dev *pctldev, |
| unsigned int group) |
| { |
| return NULL; |
| } |
| |
| static int mcp_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, |
| unsigned int group, |
| const unsigned int **pins, |
| unsigned int *num_pins) |
| { |
| return -ENOTSUPP; |
| } |
| |
| static const struct pinctrl_ops mcp_pinctrl_ops = { |
| .get_groups_count = mcp_pinctrl_get_groups_count, |
| .get_group_name = mcp_pinctrl_get_group_name, |
| .get_group_pins = mcp_pinctrl_get_group_pins, |
| #ifdef CONFIG_OF |
| .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, |
| .dt_free_map = pinconf_generic_dt_free_map, |
| #endif |
| }; |
| |
| static int mcp_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, |
| unsigned long *config) |
| { |
| struct mcp23s08 *mcp = pinctrl_dev_get_drvdata(pctldev); |
| enum pin_config_param param = pinconf_to_config_param(*config); |
| unsigned int data, status; |
| int ret; |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_PULL_UP: |
| ret = mcp_read(mcp, MCP_GPPU, &data); |
| if (ret < 0) |
| return ret; |
| status = (data & BIT(pin)) ? 1 : 0; |
| break; |
| default: |
| return -ENOTSUPP; |
| } |
| |
| *config = 0; |
| |
| return status ? 0 : -EINVAL; |
| } |
| |
| static int mcp_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, |
| unsigned long *configs, unsigned int num_configs) |
| { |
| struct mcp23s08 *mcp = pinctrl_dev_get_drvdata(pctldev); |
| enum pin_config_param param; |
| u32 arg; |
| int ret = 0; |
| int i; |
| |
| for (i = 0; i < num_configs; i++) { |
| param = pinconf_to_config_param(configs[i]); |
| arg = pinconf_to_config_argument(configs[i]); |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_PULL_UP: |
| ret = mcp_set_bit(mcp, MCP_GPPU, pin, arg); |
| break; |
| default: |
| dev_dbg(mcp->dev, "Invalid config param %04x\n", param); |
| return -ENOTSUPP; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static const struct pinconf_ops mcp_pinconf_ops = { |
| .pin_config_get = mcp_pinconf_get, |
| .pin_config_set = mcp_pinconf_set, |
| .is_generic = true, |
| }; |
| |
| /*----------------------------------------------------------------------*/ |
| |
| static int mcp23s08_direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| struct mcp23s08 *mcp = gpiochip_get_data(chip); |
| int status; |
| |
| mutex_lock(&mcp->lock); |
| status = mcp_set_bit(mcp, MCP_IODIR, offset, true); |
| mutex_unlock(&mcp->lock); |
| |
| return status; |
| } |
| |
| static int mcp23s08_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct mcp23s08 *mcp = gpiochip_get_data(chip); |
| int status, ret; |
| |
| mutex_lock(&mcp->lock); |
| |
| /* REVISIT reading this clears any IRQ ... */ |
| ret = mcp_read(mcp, MCP_GPIO, &status); |
| if (ret < 0) |
| status = 0; |
| else { |
| mcp->cached_gpio = status; |
| status = !!(status & (1 << offset)); |
| } |
| |
| mutex_unlock(&mcp->lock); |
| return status; |
| } |
| |
| static int __mcp23s08_set(struct mcp23s08 *mcp, unsigned mask, bool value) |
| { |
| return mcp_set_mask(mcp, MCP_OLAT, mask, value); |
| } |
| |
| static void mcp23s08_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct mcp23s08 *mcp = gpiochip_get_data(chip); |
| unsigned mask = BIT(offset); |
| |
| mutex_lock(&mcp->lock); |
| __mcp23s08_set(mcp, mask, !!value); |
| mutex_unlock(&mcp->lock); |
| } |
| |
| static int |
| mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct mcp23s08 *mcp = gpiochip_get_data(chip); |
| unsigned mask = BIT(offset); |
| int status; |
| |
| mutex_lock(&mcp->lock); |
| status = __mcp23s08_set(mcp, mask, value); |
| if (status == 0) { |
| status = mcp_set_mask(mcp, MCP_IODIR, mask, false); |
| } |
| mutex_unlock(&mcp->lock); |
| return status; |
| } |
| |
| /*----------------------------------------------------------------------*/ |
| static irqreturn_t mcp23s08_irq(int irq, void *data) |
| { |
| struct mcp23s08 *mcp = data; |
| int intcap, intcon, intf, i, gpio, gpio_orig, intcap_mask, defval; |
| unsigned int child_irq; |
| bool intf_set, intcap_changed, gpio_bit_changed, |
| defval_changed, gpio_set; |
| |
| mutex_lock(&mcp->lock); |
| if (mcp_read(mcp, MCP_INTF, &intf)) |
| goto unlock; |
| |
| if (intf == 0) { |
| /* There is no interrupt pending */ |
| goto unlock; |
| } |
| |
| if (mcp_read(mcp, MCP_INTCAP, &intcap)) |
| goto unlock; |
| |
| if (mcp_read(mcp, MCP_INTCON, &intcon)) |
| goto unlock; |
| |
| if (mcp_read(mcp, MCP_DEFVAL, &defval)) |
| goto unlock; |
| |
| /* This clears the interrupt(configurable on S18) */ |
| if (mcp_read(mcp, MCP_GPIO, &gpio)) |
| goto unlock; |
| |
| gpio_orig = mcp->cached_gpio; |
| mcp->cached_gpio = gpio; |
| mutex_unlock(&mcp->lock); |
| |
| dev_dbg(mcp->chip.parent, |
| "intcap 0x%04X intf 0x%04X gpio_orig 0x%04X gpio 0x%04X\n", |
| intcap, intf, gpio_orig, gpio); |
| |
| for (i = 0; i < mcp->chip.ngpio; i++) { |
| /* We must check all of the inputs on the chip, |
| * otherwise we may not notice a change on >=2 pins. |
| * |
| * On at least the mcp23s17, INTCAP is only updated |
| * one byte at a time(INTCAPA and INTCAPB are |
| * not written to at the same time - only on a per-bank |
| * basis). |
| * |
| * INTF only contains the single bit that caused the |
| * interrupt per-bank. On the mcp23s17, there is |
| * INTFA and INTFB. If two pins are changed on the A |
| * side at the same time, INTF will only have one bit |
| * set. If one pin on the A side and one pin on the B |
| * side are changed at the same time, INTF will have |
| * two bits set. Thus, INTF can't be the only check |
| * to see if the input has changed. |
| */ |
| |
| intf_set = intf & BIT(i); |
| if (i < 8 && intf_set) |
| intcap_mask = 0x00FF; |
| else if (i >= 8 && intf_set) |
| intcap_mask = 0xFF00; |
| else |
| intcap_mask = 0x00; |
| |
| intcap_changed = (intcap_mask & |
| (intcap & BIT(i))) != |
| (intcap_mask & (BIT(i) & gpio_orig)); |
| gpio_set = BIT(i) & gpio; |
| gpio_bit_changed = (BIT(i) & gpio_orig) != |
| (BIT(i) & gpio); |
| defval_changed = (BIT(i) & intcon) && |
| ((BIT(i) & gpio) != |
| (BIT(i) & defval)); |
| |
| if (((gpio_bit_changed || intcap_changed) && |
| (BIT(i) & mcp->irq_rise) && gpio_set) || |
| ((gpio_bit_changed || intcap_changed) && |
| (BIT(i) & mcp->irq_fall) && !gpio_set) || |
| defval_changed) { |
| child_irq = irq_find_mapping(mcp->chip.irq.domain, i); |
| handle_nested_irq(child_irq); |
| } |
| } |
| |
| return IRQ_HANDLED; |
| |
| unlock: |
| mutex_unlock(&mcp->lock); |
| return IRQ_HANDLED; |
| } |
| |
| static void mcp23s08_irq_mask(struct irq_data *data) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(data); |
| struct mcp23s08 *mcp = gpiochip_get_data(gc); |
| unsigned int pos = data->hwirq; |
| |
| mcp_set_bit(mcp, MCP_GPINTEN, pos, false); |
| } |
| |
| static void mcp23s08_irq_unmask(struct irq_data *data) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(data); |
| struct mcp23s08 *mcp = gpiochip_get_data(gc); |
| unsigned int pos = data->hwirq; |
| |
| mcp_set_bit(mcp, MCP_GPINTEN, pos, true); |
| } |
| |
| static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(data); |
| struct mcp23s08 *mcp = gpiochip_get_data(gc); |
| unsigned int pos = data->hwirq; |
| |
| if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { |
| mcp_set_bit(mcp, MCP_INTCON, pos, false); |
| mcp->irq_rise |= BIT(pos); |
| mcp->irq_fall |= BIT(pos); |
| } else if (type & IRQ_TYPE_EDGE_RISING) { |
| mcp_set_bit(mcp, MCP_INTCON, pos, false); |
| mcp->irq_rise |= BIT(pos); |
| mcp->irq_fall &= ~BIT(pos); |
| } else if (type & IRQ_TYPE_EDGE_FALLING) { |
| mcp_set_bit(mcp, MCP_INTCON, pos, false); |
| mcp->irq_rise &= ~BIT(pos); |
| mcp->irq_fall |= BIT(pos); |
| } else if (type & IRQ_TYPE_LEVEL_HIGH) { |
| mcp_set_bit(mcp, MCP_INTCON, pos, true); |
| mcp_set_bit(mcp, MCP_DEFVAL, pos, false); |
| } else if (type & IRQ_TYPE_LEVEL_LOW) { |
| mcp_set_bit(mcp, MCP_INTCON, pos, true); |
| mcp_set_bit(mcp, MCP_DEFVAL, pos, true); |
| } else |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static void mcp23s08_irq_bus_lock(struct irq_data *data) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(data); |
| struct mcp23s08 *mcp = gpiochip_get_data(gc); |
| |
| mutex_lock(&mcp->lock); |
| regcache_cache_only(mcp->regmap, true); |
| } |
| |
| static void mcp23s08_irq_bus_unlock(struct irq_data *data) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(data); |
| struct mcp23s08 *mcp = gpiochip_get_data(gc); |
| |
| regcache_cache_only(mcp->regmap, false); |
| regcache_sync(mcp->regmap); |
| |
| mutex_unlock(&mcp->lock); |
| } |
| |
| static int mcp23s08_irq_setup(struct mcp23s08 *mcp) |
| { |
| struct gpio_chip *chip = &mcp->chip; |
| int err; |
| unsigned long irqflags = IRQF_ONESHOT | IRQF_SHARED; |
| |
| if (mcp->irq_active_high) |
| irqflags |= IRQF_TRIGGER_HIGH; |
| else |
| irqflags |= IRQF_TRIGGER_LOW; |
| |
| err = devm_request_threaded_irq(chip->parent, mcp->irq, NULL, |
| mcp23s08_irq, |
| irqflags, dev_name(chip->parent), mcp); |
| if (err != 0) { |
| dev_err(chip->parent, "unable to request IRQ#%d: %d\n", |
| mcp->irq, err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| /*----------------------------------------------------------------------*/ |
| |
| int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, |
| unsigned int addr, unsigned int type, unsigned int base) |
| { |
| int status, ret; |
| bool mirror = false; |
| bool open_drain = false; |
| |
| mutex_init(&mcp->lock); |
| |
| mcp->dev = dev; |
| mcp->addr = addr; |
| |
| mcp->irq_active_high = false; |
| mcp->irq_chip.name = dev_name(dev); |
| mcp->irq_chip.irq_mask = mcp23s08_irq_mask; |
| mcp->irq_chip.irq_unmask = mcp23s08_irq_unmask; |
| mcp->irq_chip.irq_set_type = mcp23s08_irq_set_type; |
| mcp->irq_chip.irq_bus_lock = mcp23s08_irq_bus_lock; |
| mcp->irq_chip.irq_bus_sync_unlock = mcp23s08_irq_bus_unlock; |
| |
| mcp->chip.direction_input = mcp23s08_direction_input; |
| mcp->chip.get = mcp23s08_get; |
| mcp->chip.direction_output = mcp23s08_direction_output; |
| mcp->chip.set = mcp23s08_set; |
| |
| mcp->chip.base = base; |
| mcp->chip.can_sleep = true; |
| mcp->chip.parent = dev; |
| mcp->chip.owner = THIS_MODULE; |
| |
| mcp->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); |
| |
| /* verify MCP_IOCON.SEQOP = 0, so sequential reads work, |
| * and MCP_IOCON.HAEN = 1, so we work with all chips. |
| */ |
| |
| ret = mcp_read(mcp, MCP_IOCON, &status); |
| if (ret < 0) |
| return dev_err_probe(dev, ret, "can't identify chip %d\n", addr); |
| |
| mcp->irq_controller = |
| device_property_read_bool(dev, "interrupt-controller"); |
| if (mcp->irq && mcp->irq_controller) { |
| mcp->irq_active_high = |
| device_property_read_bool(dev, |
| "microchip,irq-active-high"); |
| |
| mirror = device_property_read_bool(dev, "microchip,irq-mirror"); |
| open_drain = device_property_read_bool(dev, "drive-open-drain"); |
| } |
| |
| if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror || |
| mcp->irq_active_high || open_drain) { |
| /* mcp23s17 has IOCON twice, make sure they are in sync */ |
| status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8)); |
| status |= IOCON_HAEN | (IOCON_HAEN << 8); |
| if (mcp->irq_active_high) |
| status |= IOCON_INTPOL | (IOCON_INTPOL << 8); |
| else |
| status &= ~(IOCON_INTPOL | (IOCON_INTPOL << 8)); |
| |
| if (mirror) |
| status |= IOCON_MIRROR | (IOCON_MIRROR << 8); |
| |
| if (open_drain) |
| status |= IOCON_ODR | (IOCON_ODR << 8); |
| |
| if (type == MCP_TYPE_S18 || type == MCP_TYPE_018) |
| status |= IOCON_INTCC | (IOCON_INTCC << 8); |
| |
| ret = mcp_write(mcp, MCP_IOCON, status); |
| if (ret < 0) |
| return dev_err_probe(dev, ret, "can't write IOCON %d\n", addr); |
| } |
| |
| if (mcp->irq && mcp->irq_controller) { |
| struct gpio_irq_chip *girq = &mcp->chip.irq; |
| |
| girq->chip = &mcp->irq_chip; |
| /* This will let us handle the parent IRQ in the driver */ |
| girq->parent_handler = NULL; |
| girq->num_parents = 0; |
| girq->parents = NULL; |
| girq->default_type = IRQ_TYPE_NONE; |
| girq->handler = handle_simple_irq; |
| girq->threaded = true; |
| } |
| |
| ret = devm_gpiochip_add_data(dev, &mcp->chip, mcp); |
| if (ret < 0) |
| return dev_err_probe(dev, ret, "can't add GPIO chip\n"); |
| |
| mcp->pinctrl_desc.pctlops = &mcp_pinctrl_ops; |
| mcp->pinctrl_desc.confops = &mcp_pinconf_ops; |
| mcp->pinctrl_desc.npins = mcp->chip.ngpio; |
| if (mcp->pinctrl_desc.npins == 8) |
| mcp->pinctrl_desc.pins = mcp23x08_pins; |
| else if (mcp->pinctrl_desc.npins == 16) |
| mcp->pinctrl_desc.pins = mcp23x17_pins; |
| mcp->pinctrl_desc.owner = THIS_MODULE; |
| |
| mcp->pctldev = devm_pinctrl_register(dev, &mcp->pinctrl_desc, mcp); |
| if (IS_ERR(mcp->pctldev)) |
| return dev_err_probe(dev, PTR_ERR(mcp->pctldev), "can't register controller\n"); |
| |
| if (mcp->irq) { |
| ret = mcp23s08_irq_setup(mcp); |
| if (ret) |
| return dev_err_probe(dev, ret, "can't setup IRQ\n"); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mcp23s08_probe_one); |
| |
| MODULE_LICENSE("GPL"); |