| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef _ASM_GENERIC_GPIO_H |
| #define _ASM_GENERIC_GPIO_H |
| |
| #include <linux/types.h> |
| #include <linux/errno.h> |
| |
| #ifdef CONFIG_GPIOLIB |
| |
| #include <linux/compiler.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/gpio/consumer.h> |
| |
| /* |
| * Platforms may implement their GPIO interface with library code, |
| * at a small performance cost for non-inlined operations and some |
| * extra memory (for code and for per-GPIO table entries). |
| */ |
| |
| /* |
| * At the end we want all GPIOs to be dynamically allocated from 0. |
| * However, some legacy drivers still perform fixed allocation. |
| * Until they are all fixed, leave 0-512 space for them. |
| */ |
| #define GPIO_DYNAMIC_BASE 512 |
| |
| struct device; |
| struct gpio; |
| struct seq_file; |
| struct module; |
| struct device_node; |
| struct gpio_desc; |
| |
| /* caller holds gpio_lock *OR* gpio is marked as requested */ |
| static inline struct gpio_chip *gpio_to_chip(unsigned gpio) |
| { |
| return gpiod_to_chip(gpio_to_desc(gpio)); |
| } |
| |
| /* Always use the library code for GPIO management calls, |
| * or when sleeping may be involved. |
| */ |
| extern int gpio_request(unsigned gpio, const char *label); |
| extern void gpio_free(unsigned gpio); |
| |
| static inline int gpio_direction_input(unsigned gpio) |
| { |
| return gpiod_direction_input(gpio_to_desc(gpio)); |
| } |
| static inline int gpio_direction_output(unsigned gpio, int value) |
| { |
| return gpiod_direction_output_raw(gpio_to_desc(gpio), value); |
| } |
| |
| static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) |
| { |
| return gpiod_set_debounce(gpio_to_desc(gpio), debounce); |
| } |
| |
| static inline int gpio_get_value_cansleep(unsigned gpio) |
| { |
| return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio)); |
| } |
| static inline void gpio_set_value_cansleep(unsigned gpio, int value) |
| { |
| return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value); |
| } |
| |
| |
| /* A platform's <asm/gpio.h> code may want to inline the I/O calls when |
| * the GPIO is constant and refers to some always-present controller, |
| * giving direct access to chip registers and tight bitbanging loops. |
| */ |
| static inline int __gpio_get_value(unsigned gpio) |
| { |
| return gpiod_get_raw_value(gpio_to_desc(gpio)); |
| } |
| static inline void __gpio_set_value(unsigned gpio, int value) |
| { |
| return gpiod_set_raw_value(gpio_to_desc(gpio), value); |
| } |
| |
| static inline int __gpio_cansleep(unsigned gpio) |
| { |
| return gpiod_cansleep(gpio_to_desc(gpio)); |
| } |
| |
| static inline int __gpio_to_irq(unsigned gpio) |
| { |
| return gpiod_to_irq(gpio_to_desc(gpio)); |
| } |
| |
| extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); |
| extern int gpio_request_array(const struct gpio *array, size_t num); |
| extern void gpio_free_array(const struct gpio *array, size_t num); |
| |
| /* |
| * A sysfs interface can be exported by individual drivers if they want, |
| * but more typically is configured entirely from userspace. |
| */ |
| static inline int gpio_export(unsigned gpio, bool direction_may_change) |
| { |
| return gpiod_export(gpio_to_desc(gpio), direction_may_change); |
| } |
| |
| static inline int gpio_export_link(struct device *dev, const char *name, |
| unsigned gpio) |
| { |
| return gpiod_export_link(dev, name, gpio_to_desc(gpio)); |
| } |
| |
| static inline void gpio_unexport(unsigned gpio) |
| { |
| gpiod_unexport(gpio_to_desc(gpio)); |
| } |
| |
| #else /* !CONFIG_GPIOLIB */ |
| |
| #include <linux/kernel.h> |
| |
| /* platforms that don't directly support access to GPIOs through I2C, SPI, |
| * or other blocking infrastructure can use these wrappers. |
| */ |
| |
| static inline int gpio_cansleep(unsigned gpio) |
| { |
| return 0; |
| } |
| |
| static inline int gpio_get_value_cansleep(unsigned gpio) |
| { |
| might_sleep(); |
| return __gpio_get_value(gpio); |
| } |
| |
| static inline void gpio_set_value_cansleep(unsigned gpio, int value) |
| { |
| might_sleep(); |
| __gpio_set_value(gpio, value); |
| } |
| |
| #endif /* !CONFIG_GPIOLIB */ |
| |
| /* |
| * "valid" GPIO numbers are nonnegative and may be passed to |
| * setup routines like gpio_request(). only some valid numbers |
| * can successfully be requested and used. |
| * |
| * Invalid GPIO numbers are useful for indicating no-such-GPIO in |
| * platform data and other tables. |
| */ |
| |
| static inline bool gpio_is_valid(int number) |
| { |
| /* only non-negative numbers are valid */ |
| return number >= 0; |
| } |
| |
| #endif /* _ASM_GENERIC_GPIO_H */ |