|  | /* | 
|  | * drivers/power/process.c - Functions for starting/stopping processes on | 
|  | *                           suspend transitions. | 
|  | * | 
|  | * Originally from swsusp. | 
|  | */ | 
|  |  | 
|  |  | 
|  | #undef DEBUG | 
|  |  | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/oom.h> | 
|  | #include <linux/suspend.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/syscalls.h> | 
|  | #include <linux/freezer.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/workqueue.h> | 
|  |  | 
|  | /* | 
|  | * Timeout for stopping processes | 
|  | */ | 
|  | #define TIMEOUT	(20 * HZ) | 
|  |  | 
|  | static int try_to_freeze_tasks(bool user_only) | 
|  | { | 
|  | struct task_struct *g, *p; | 
|  | unsigned long end_time; | 
|  | unsigned int todo; | 
|  | bool wq_busy = false; | 
|  | struct timeval start, end; | 
|  | u64 elapsed_csecs64; | 
|  | unsigned int elapsed_csecs; | 
|  | bool wakeup = false; | 
|  |  | 
|  | do_gettimeofday(&start); | 
|  |  | 
|  | end_time = jiffies + TIMEOUT; | 
|  |  | 
|  | if (!user_only) | 
|  | freeze_workqueues_begin(); | 
|  |  | 
|  | while (true) { | 
|  | todo = 0; | 
|  | read_lock(&tasklist_lock); | 
|  | do_each_thread(g, p) { | 
|  | if (p == current || !freeze_task(p)) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * Now that we've done set_freeze_flag, don't | 
|  | * perturb a task in TASK_STOPPED or TASK_TRACED. | 
|  | * It is "frozen enough".  If the task does wake | 
|  | * up, it will immediately call try_to_freeze. | 
|  | * | 
|  | * Because freeze_task() goes through p's | 
|  | * scheduler lock after setting TIF_FREEZE, it's | 
|  | * guaranteed that either we see TASK_RUNNING or | 
|  | * try_to_stop() after schedule() in ptrace/signal | 
|  | * stop sees TIF_FREEZE. | 
|  | */ | 
|  | if (!task_is_stopped_or_traced(p) && | 
|  | !freezer_should_skip(p)) | 
|  | todo++; | 
|  | } while_each_thread(g, p); | 
|  | read_unlock(&tasklist_lock); | 
|  |  | 
|  | if (!user_only) { | 
|  | wq_busy = freeze_workqueues_busy(); | 
|  | todo += wq_busy; | 
|  | } | 
|  |  | 
|  | if (!todo || time_after(jiffies, end_time)) | 
|  | break; | 
|  |  | 
|  | if (pm_wakeup_pending()) { | 
|  | wakeup = true; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We need to retry, but first give the freezing tasks some | 
|  | * time to enter the regrigerator. | 
|  | */ | 
|  | msleep(10); | 
|  | } | 
|  |  | 
|  | do_gettimeofday(&end); | 
|  | elapsed_csecs64 = timeval_to_ns(&end) - timeval_to_ns(&start); | 
|  | do_div(elapsed_csecs64, NSEC_PER_SEC / 100); | 
|  | elapsed_csecs = elapsed_csecs64; | 
|  |  | 
|  | if (todo) { | 
|  | printk("\n"); | 
|  | printk(KERN_ERR "Freezing of tasks %s after %d.%02d seconds " | 
|  | "(%d tasks refusing to freeze, wq_busy=%d):\n", | 
|  | wakeup ? "aborted" : "failed", | 
|  | elapsed_csecs / 100, elapsed_csecs % 100, | 
|  | todo - wq_busy, wq_busy); | 
|  |  | 
|  | read_lock(&tasklist_lock); | 
|  | do_each_thread(g, p) { | 
|  | if (!wakeup && !freezer_should_skip(p) && | 
|  | p != current && freezing(p) && !frozen(p)) | 
|  | sched_show_task(p); | 
|  | } while_each_thread(g, p); | 
|  | read_unlock(&tasklist_lock); | 
|  | } else { | 
|  | printk("(elapsed %d.%02d seconds) ", elapsed_csecs / 100, | 
|  | elapsed_csecs % 100); | 
|  | } | 
|  |  | 
|  | return todo ? -EBUSY : 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * freeze_processes - Signal user space processes to enter the refrigerator. | 
|  | * | 
|  | * On success, returns 0.  On failure, -errno and system is fully thawed. | 
|  | */ | 
|  | int freeze_processes(void) | 
|  | { | 
|  | int error; | 
|  |  | 
|  | if (!pm_freezing) | 
|  | atomic_inc(&system_freezing_cnt); | 
|  |  | 
|  | printk("Freezing user space processes ... "); | 
|  | pm_freezing = true; | 
|  | error = try_to_freeze_tasks(true); | 
|  | if (!error) { | 
|  | printk("done."); | 
|  | oom_killer_disable(); | 
|  | } | 
|  | printk("\n"); | 
|  | BUG_ON(in_atomic()); | 
|  |  | 
|  | if (error) | 
|  | thaw_processes(); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * freeze_kernel_threads - Make freezable kernel threads go to the refrigerator. | 
|  | * | 
|  | * On success, returns 0.  On failure, -errno and system is fully thawed. | 
|  | */ | 
|  | int freeze_kernel_threads(void) | 
|  | { | 
|  | int error; | 
|  |  | 
|  | printk("Freezing remaining freezable tasks ... "); | 
|  | pm_nosig_freezing = true; | 
|  | error = try_to_freeze_tasks(false); | 
|  | if (!error) | 
|  | printk("done."); | 
|  |  | 
|  | printk("\n"); | 
|  | BUG_ON(in_atomic()); | 
|  |  | 
|  | if (error) | 
|  | thaw_processes(); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | void thaw_processes(void) | 
|  | { | 
|  | struct task_struct *g, *p; | 
|  |  | 
|  | if (pm_freezing) | 
|  | atomic_dec(&system_freezing_cnt); | 
|  | pm_freezing = false; | 
|  | pm_nosig_freezing = false; | 
|  |  | 
|  | oom_killer_enable(); | 
|  |  | 
|  | printk("Restarting tasks ... "); | 
|  |  | 
|  | thaw_workqueues(); | 
|  |  | 
|  | read_lock(&tasklist_lock); | 
|  | do_each_thread(g, p) { | 
|  | __thaw_task(p); | 
|  | } while_each_thread(g, p); | 
|  | read_unlock(&tasklist_lock); | 
|  |  | 
|  | schedule(); | 
|  | printk("done.\n"); | 
|  | } | 
|  |  |