| /* |
| * Copyright (c) 2000-2005 Silicon Graphics, Inc. |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it would be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_format.h" |
| #include "xfs_bit.h" |
| #include "xfs_log.h" |
| #include "xfs_trans.h" |
| #include "xfs_trans_priv.h" |
| #include "xfs_sb.h" |
| #include "xfs_ag.h" |
| #include "xfs_mount.h" |
| #include "xfs_da_btree.h" |
| #include "xfs_bmap_btree.h" |
| #include "xfs_attr_sf.h" |
| #include "xfs_dinode.h" |
| #include "xfs_inode.h" |
| #include "xfs_alloc.h" |
| #include "xfs_inode_item.h" |
| #include "xfs_bmap.h" |
| #include "xfs_bmap_util.h" |
| #include "xfs_attr.h" |
| #include "xfs_attr_leaf.h" |
| #include "xfs_attr_remote.h" |
| #include "xfs_error.h" |
| #include "xfs_quota.h" |
| #include "xfs_trans_space.h" |
| #include "xfs_trace.h" |
| |
| /* |
| * xfs_attr.c |
| * |
| * Provide the external interfaces to manage attribute lists. |
| */ |
| |
| /*======================================================================== |
| * Function prototypes for the kernel. |
| *========================================================================*/ |
| |
| /* |
| * Internal routines when attribute list fits inside the inode. |
| */ |
| STATIC int xfs_attr_shortform_addname(xfs_da_args_t *args); |
| |
| /* |
| * Internal routines when attribute list is one block. |
| */ |
| STATIC int xfs_attr_leaf_get(xfs_da_args_t *args); |
| STATIC int xfs_attr_leaf_addname(xfs_da_args_t *args); |
| STATIC int xfs_attr_leaf_removename(xfs_da_args_t *args); |
| |
| /* |
| * Internal routines when attribute list is more than one block. |
| */ |
| STATIC int xfs_attr_node_get(xfs_da_args_t *args); |
| STATIC int xfs_attr_node_addname(xfs_da_args_t *args); |
| STATIC int xfs_attr_node_removename(xfs_da_args_t *args); |
| STATIC int xfs_attr_fillstate(xfs_da_state_t *state); |
| STATIC int xfs_attr_refillstate(xfs_da_state_t *state); |
| |
| |
| STATIC int |
| xfs_attr_name_to_xname( |
| struct xfs_name *xname, |
| const unsigned char *aname) |
| { |
| if (!aname) |
| return EINVAL; |
| xname->name = aname; |
| xname->len = strlen((char *)aname); |
| if (xname->len >= MAXNAMELEN) |
| return EFAULT; /* match IRIX behaviour */ |
| |
| return 0; |
| } |
| |
| int |
| xfs_inode_hasattr( |
| struct xfs_inode *ip) |
| { |
| if (!XFS_IFORK_Q(ip) || |
| (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && |
| ip->i_d.di_anextents == 0)) |
| return 0; |
| return 1; |
| } |
| |
| /*======================================================================== |
| * Overall external interface routines. |
| *========================================================================*/ |
| |
| STATIC int |
| xfs_attr_get_int( |
| struct xfs_inode *ip, |
| struct xfs_name *name, |
| unsigned char *value, |
| int *valuelenp, |
| int flags) |
| { |
| xfs_da_args_t args; |
| int error; |
| |
| if (!xfs_inode_hasattr(ip)) |
| return ENOATTR; |
| |
| /* |
| * Fill in the arg structure for this request. |
| */ |
| memset((char *)&args, 0, sizeof(args)); |
| args.name = name->name; |
| args.namelen = name->len; |
| args.value = value; |
| args.valuelen = *valuelenp; |
| args.flags = flags; |
| args.hashval = xfs_da_hashname(args.name, args.namelen); |
| args.dp = ip; |
| args.whichfork = XFS_ATTR_FORK; |
| |
| /* |
| * Decide on what work routines to call based on the inode size. |
| */ |
| if (ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { |
| error = xfs_attr_shortform_getvalue(&args); |
| } else if (xfs_bmap_one_block(ip, XFS_ATTR_FORK)) { |
| error = xfs_attr_leaf_get(&args); |
| } else { |
| error = xfs_attr_node_get(&args); |
| } |
| |
| /* |
| * Return the number of bytes in the value to the caller. |
| */ |
| *valuelenp = args.valuelen; |
| |
| if (error == EEXIST) |
| error = 0; |
| return(error); |
| } |
| |
| int |
| xfs_attr_get( |
| xfs_inode_t *ip, |
| const unsigned char *name, |
| unsigned char *value, |
| int *valuelenp, |
| int flags) |
| { |
| int error; |
| struct xfs_name xname; |
| |
| XFS_STATS_INC(xs_attr_get); |
| |
| if (XFS_FORCED_SHUTDOWN(ip->i_mount)) |
| return(EIO); |
| |
| error = xfs_attr_name_to_xname(&xname, name); |
| if (error) |
| return error; |
| |
| xfs_ilock(ip, XFS_ILOCK_SHARED); |
| error = xfs_attr_get_int(ip, &xname, value, valuelenp, flags); |
| xfs_iunlock(ip, XFS_ILOCK_SHARED); |
| return(error); |
| } |
| |
| /* |
| * Calculate how many blocks we need for the new attribute, |
| */ |
| STATIC int |
| xfs_attr_calc_size( |
| struct xfs_inode *ip, |
| int namelen, |
| int valuelen, |
| int *local) |
| { |
| struct xfs_mount *mp = ip->i_mount; |
| int size; |
| int nblks; |
| |
| /* |
| * Determine space new attribute will use, and if it would be |
| * "local" or "remote" (note: local != inline). |
| */ |
| size = xfs_attr_leaf_newentsize(namelen, valuelen, |
| mp->m_sb.sb_blocksize, local); |
| |
| nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK); |
| if (*local) { |
| if (size > (mp->m_sb.sb_blocksize >> 1)) { |
| /* Double split possible */ |
| nblks *= 2; |
| } |
| } else { |
| /* |
| * Out of line attribute, cannot double split, but |
| * make room for the attribute value itself. |
| */ |
| uint dblocks = XFS_B_TO_FSB(mp, valuelen); |
| nblks += dblocks; |
| nblks += XFS_NEXTENTADD_SPACE_RES(mp, dblocks, XFS_ATTR_FORK); |
| } |
| |
| return nblks; |
| } |
| |
| STATIC int |
| xfs_attr_set_int( |
| struct xfs_inode *dp, |
| struct xfs_name *name, |
| unsigned char *value, |
| int valuelen, |
| int flags) |
| { |
| xfs_da_args_t args; |
| xfs_fsblock_t firstblock; |
| xfs_bmap_free_t flist; |
| int error, err2, committed; |
| xfs_mount_t *mp = dp->i_mount; |
| int rsvd = (flags & ATTR_ROOT) != 0; |
| int local; |
| |
| /* |
| * Attach the dquots to the inode. |
| */ |
| error = xfs_qm_dqattach(dp, 0); |
| if (error) |
| return error; |
| |
| /* |
| * If the inode doesn't have an attribute fork, add one. |
| * (inode must not be locked when we call this routine) |
| */ |
| if (XFS_IFORK_Q(dp) == 0) { |
| int sf_size = sizeof(xfs_attr_sf_hdr_t) + |
| XFS_ATTR_SF_ENTSIZE_BYNAME(name->len, valuelen); |
| |
| if ((error = xfs_bmap_add_attrfork(dp, sf_size, rsvd))) |
| return(error); |
| } |
| |
| /* |
| * Fill in the arg structure for this request. |
| */ |
| memset((char *)&args, 0, sizeof(args)); |
| args.name = name->name; |
| args.namelen = name->len; |
| args.value = value; |
| args.valuelen = valuelen; |
| args.flags = flags; |
| args.hashval = xfs_da_hashname(args.name, args.namelen); |
| args.dp = dp; |
| args.firstblock = &firstblock; |
| args.flist = &flist; |
| args.whichfork = XFS_ATTR_FORK; |
| args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT; |
| |
| /* Size is now blocks for attribute data */ |
| args.total = xfs_attr_calc_size(dp, name->len, valuelen, &local); |
| |
| /* |
| * Start our first transaction of the day. |
| * |
| * All future transactions during this code must be "chained" off |
| * this one via the trans_dup() call. All transactions will contain |
| * the inode, and the inode will always be marked with trans_ihold(). |
| * Since the inode will be locked in all transactions, we must log |
| * the inode in every transaction to let it float upward through |
| * the log. |
| */ |
| args.trans = xfs_trans_alloc(mp, XFS_TRANS_ATTR_SET); |
| |
| /* |
| * Root fork attributes can use reserved data blocks for this |
| * operation if necessary |
| */ |
| |
| if (rsvd) |
| args.trans->t_flags |= XFS_TRANS_RESERVE; |
| |
| error = xfs_trans_reserve(args.trans, args.total, |
| XFS_ATTRSETM_LOG_RES(mp) + |
| XFS_ATTRSETRT_LOG_RES(mp) * args.total, |
| 0, XFS_TRANS_PERM_LOG_RES, |
| XFS_ATTRSET_LOG_COUNT); |
| if (error) { |
| xfs_trans_cancel(args.trans, 0); |
| return(error); |
| } |
| xfs_ilock(dp, XFS_ILOCK_EXCL); |
| |
| error = xfs_trans_reserve_quota_nblks(args.trans, dp, args.total, 0, |
| rsvd ? XFS_QMOPT_RES_REGBLKS | XFS_QMOPT_FORCE_RES : |
| XFS_QMOPT_RES_REGBLKS); |
| if (error) { |
| xfs_iunlock(dp, XFS_ILOCK_EXCL); |
| xfs_trans_cancel(args.trans, XFS_TRANS_RELEASE_LOG_RES); |
| return (error); |
| } |
| |
| xfs_trans_ijoin(args.trans, dp, 0); |
| |
| /* |
| * If the attribute list is non-existent or a shortform list, |
| * upgrade it to a single-leaf-block attribute list. |
| */ |
| if ((dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) || |
| ((dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS) && |
| (dp->i_d.di_anextents == 0))) { |
| |
| /* |
| * Build initial attribute list (if required). |
| */ |
| if (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS) |
| xfs_attr_shortform_create(&args); |
| |
| /* |
| * Try to add the attr to the attribute list in |
| * the inode. |
| */ |
| error = xfs_attr_shortform_addname(&args); |
| if (error != ENOSPC) { |
| /* |
| * Commit the shortform mods, and we're done. |
| * NOTE: this is also the error path (EEXIST, etc). |
| */ |
| ASSERT(args.trans != NULL); |
| |
| /* |
| * If this is a synchronous mount, make sure that |
| * the transaction goes to disk before returning |
| * to the user. |
| */ |
| if (mp->m_flags & XFS_MOUNT_WSYNC) { |
| xfs_trans_set_sync(args.trans); |
| } |
| |
| if (!error && (flags & ATTR_KERNOTIME) == 0) { |
| xfs_trans_ichgtime(args.trans, dp, |
| XFS_ICHGTIME_CHG); |
| } |
| err2 = xfs_trans_commit(args.trans, |
| XFS_TRANS_RELEASE_LOG_RES); |
| xfs_iunlock(dp, XFS_ILOCK_EXCL); |
| |
| return(error == 0 ? err2 : error); |
| } |
| |
| /* |
| * It won't fit in the shortform, transform to a leaf block. |
| * GROT: another possible req'mt for a double-split btree op. |
| */ |
| xfs_bmap_init(args.flist, args.firstblock); |
| error = xfs_attr_shortform_to_leaf(&args); |
| if (!error) { |
| error = xfs_bmap_finish(&args.trans, args.flist, |
| &committed); |
| } |
| if (error) { |
| ASSERT(committed); |
| args.trans = NULL; |
| xfs_bmap_cancel(&flist); |
| goto out; |
| } |
| |
| /* |
| * bmap_finish() may have committed the last trans and started |
| * a new one. We need the inode to be in all transactions. |
| */ |
| if (committed) |
| xfs_trans_ijoin(args.trans, dp, 0); |
| |
| /* |
| * Commit the leaf transformation. We'll need another (linked) |
| * transaction to add the new attribute to the leaf. |
| */ |
| |
| error = xfs_trans_roll(&args.trans, dp); |
| if (error) |
| goto out; |
| |
| } |
| |
| if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) { |
| error = xfs_attr_leaf_addname(&args); |
| } else { |
| error = xfs_attr_node_addname(&args); |
| } |
| if (error) { |
| goto out; |
| } |
| |
| /* |
| * If this is a synchronous mount, make sure that the |
| * transaction goes to disk before returning to the user. |
| */ |
| if (mp->m_flags & XFS_MOUNT_WSYNC) { |
| xfs_trans_set_sync(args.trans); |
| } |
| |
| if ((flags & ATTR_KERNOTIME) == 0) |
| xfs_trans_ichgtime(args.trans, dp, XFS_ICHGTIME_CHG); |
| |
| /* |
| * Commit the last in the sequence of transactions. |
| */ |
| xfs_trans_log_inode(args.trans, dp, XFS_ILOG_CORE); |
| error = xfs_trans_commit(args.trans, XFS_TRANS_RELEASE_LOG_RES); |
| xfs_iunlock(dp, XFS_ILOCK_EXCL); |
| |
| return(error); |
| |
| out: |
| if (args.trans) |
| xfs_trans_cancel(args.trans, |
| XFS_TRANS_RELEASE_LOG_RES|XFS_TRANS_ABORT); |
| xfs_iunlock(dp, XFS_ILOCK_EXCL); |
| return(error); |
| } |
| |
| int |
| xfs_attr_set( |
| xfs_inode_t *dp, |
| const unsigned char *name, |
| unsigned char *value, |
| int valuelen, |
| int flags) |
| { |
| int error; |
| struct xfs_name xname; |
| |
| XFS_STATS_INC(xs_attr_set); |
| |
| if (XFS_FORCED_SHUTDOWN(dp->i_mount)) |
| return (EIO); |
| |
| error = xfs_attr_name_to_xname(&xname, name); |
| if (error) |
| return error; |
| |
| return xfs_attr_set_int(dp, &xname, value, valuelen, flags); |
| } |
| |
| /* |
| * Generic handler routine to remove a name from an attribute list. |
| * Transitions attribute list from Btree to shortform as necessary. |
| */ |
| STATIC int |
| xfs_attr_remove_int(xfs_inode_t *dp, struct xfs_name *name, int flags) |
| { |
| xfs_da_args_t args; |
| xfs_fsblock_t firstblock; |
| xfs_bmap_free_t flist; |
| int error; |
| xfs_mount_t *mp = dp->i_mount; |
| |
| /* |
| * Fill in the arg structure for this request. |
| */ |
| memset((char *)&args, 0, sizeof(args)); |
| args.name = name->name; |
| args.namelen = name->len; |
| args.flags = flags; |
| args.hashval = xfs_da_hashname(args.name, args.namelen); |
| args.dp = dp; |
| args.firstblock = &firstblock; |
| args.flist = &flist; |
| args.total = 0; |
| args.whichfork = XFS_ATTR_FORK; |
| |
| /* |
| * we have no control over the attribute names that userspace passes us |
| * to remove, so we have to allow the name lookup prior to attribute |
| * removal to fail. |
| */ |
| args.op_flags = XFS_DA_OP_OKNOENT; |
| |
| /* |
| * Attach the dquots to the inode. |
| */ |
| error = xfs_qm_dqattach(dp, 0); |
| if (error) |
| return error; |
| |
| /* |
| * Start our first transaction of the day. |
| * |
| * All future transactions during this code must be "chained" off |
| * this one via the trans_dup() call. All transactions will contain |
| * the inode, and the inode will always be marked with trans_ihold(). |
| * Since the inode will be locked in all transactions, we must log |
| * the inode in every transaction to let it float upward through |
| * the log. |
| */ |
| args.trans = xfs_trans_alloc(mp, XFS_TRANS_ATTR_RM); |
| |
| /* |
| * Root fork attributes can use reserved data blocks for this |
| * operation if necessary |
| */ |
| |
| if (flags & ATTR_ROOT) |
| args.trans->t_flags |= XFS_TRANS_RESERVE; |
| |
| if ((error = xfs_trans_reserve(args.trans, |
| XFS_ATTRRM_SPACE_RES(mp), |
| XFS_ATTRRM_LOG_RES(mp), |
| 0, XFS_TRANS_PERM_LOG_RES, |
| XFS_ATTRRM_LOG_COUNT))) { |
| xfs_trans_cancel(args.trans, 0); |
| return(error); |
| } |
| |
| xfs_ilock(dp, XFS_ILOCK_EXCL); |
| /* |
| * No need to make quota reservations here. We expect to release some |
| * blocks not allocate in the common case. |
| */ |
| xfs_trans_ijoin(args.trans, dp, 0); |
| |
| /* |
| * Decide on what work routines to call based on the inode size. |
| */ |
| if (!xfs_inode_hasattr(dp)) { |
| error = XFS_ERROR(ENOATTR); |
| goto out; |
| } |
| if (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { |
| ASSERT(dp->i_afp->if_flags & XFS_IFINLINE); |
| error = xfs_attr_shortform_remove(&args); |
| if (error) { |
| goto out; |
| } |
| } else if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) { |
| error = xfs_attr_leaf_removename(&args); |
| } else { |
| error = xfs_attr_node_removename(&args); |
| } |
| if (error) { |
| goto out; |
| } |
| |
| /* |
| * If this is a synchronous mount, make sure that the |
| * transaction goes to disk before returning to the user. |
| */ |
| if (mp->m_flags & XFS_MOUNT_WSYNC) { |
| xfs_trans_set_sync(args.trans); |
| } |
| |
| if ((flags & ATTR_KERNOTIME) == 0) |
| xfs_trans_ichgtime(args.trans, dp, XFS_ICHGTIME_CHG); |
| |
| /* |
| * Commit the last in the sequence of transactions. |
| */ |
| xfs_trans_log_inode(args.trans, dp, XFS_ILOG_CORE); |
| error = xfs_trans_commit(args.trans, XFS_TRANS_RELEASE_LOG_RES); |
| xfs_iunlock(dp, XFS_ILOCK_EXCL); |
| |
| return(error); |
| |
| out: |
| if (args.trans) |
| xfs_trans_cancel(args.trans, |
| XFS_TRANS_RELEASE_LOG_RES|XFS_TRANS_ABORT); |
| xfs_iunlock(dp, XFS_ILOCK_EXCL); |
| return(error); |
| } |
| |
| int |
| xfs_attr_remove( |
| xfs_inode_t *dp, |
| const unsigned char *name, |
| int flags) |
| { |
| int error; |
| struct xfs_name xname; |
| |
| XFS_STATS_INC(xs_attr_remove); |
| |
| if (XFS_FORCED_SHUTDOWN(dp->i_mount)) |
| return (EIO); |
| |
| error = xfs_attr_name_to_xname(&xname, name); |
| if (error) |
| return error; |
| |
| xfs_ilock(dp, XFS_ILOCK_SHARED); |
| if (!xfs_inode_hasattr(dp)) { |
| xfs_iunlock(dp, XFS_ILOCK_SHARED); |
| return XFS_ERROR(ENOATTR); |
| } |
| xfs_iunlock(dp, XFS_ILOCK_SHARED); |
| |
| return xfs_attr_remove_int(dp, &xname, flags); |
| } |
| |
| |
| /*======================================================================== |
| * External routines when attribute list is inside the inode |
| *========================================================================*/ |
| |
| /* |
| * Add a name to the shortform attribute list structure |
| * This is the external routine. |
| */ |
| STATIC int |
| xfs_attr_shortform_addname(xfs_da_args_t *args) |
| { |
| int newsize, forkoff, retval; |
| |
| trace_xfs_attr_sf_addname(args); |
| |
| retval = xfs_attr_shortform_lookup(args); |
| if ((args->flags & ATTR_REPLACE) && (retval == ENOATTR)) { |
| return(retval); |
| } else if (retval == EEXIST) { |
| if (args->flags & ATTR_CREATE) |
| return(retval); |
| retval = xfs_attr_shortform_remove(args); |
| ASSERT(retval == 0); |
| } |
| |
| if (args->namelen >= XFS_ATTR_SF_ENTSIZE_MAX || |
| args->valuelen >= XFS_ATTR_SF_ENTSIZE_MAX) |
| return(XFS_ERROR(ENOSPC)); |
| |
| newsize = XFS_ATTR_SF_TOTSIZE(args->dp); |
| newsize += XFS_ATTR_SF_ENTSIZE_BYNAME(args->namelen, args->valuelen); |
| |
| forkoff = xfs_attr_shortform_bytesfit(args->dp, newsize); |
| if (!forkoff) |
| return(XFS_ERROR(ENOSPC)); |
| |
| xfs_attr_shortform_add(args, forkoff); |
| return(0); |
| } |
| |
| |
| /*======================================================================== |
| * External routines when attribute list is one block |
| *========================================================================*/ |
| |
| /* |
| * Add a name to the leaf attribute list structure |
| * |
| * This leaf block cannot have a "remote" value, we only call this routine |
| * if bmap_one_block() says there is only one block (ie: no remote blks). |
| */ |
| STATIC int |
| xfs_attr_leaf_addname(xfs_da_args_t *args) |
| { |
| xfs_inode_t *dp; |
| struct xfs_buf *bp; |
| int retval, error, committed, forkoff; |
| |
| trace_xfs_attr_leaf_addname(args); |
| |
| /* |
| * Read the (only) block in the attribute list in. |
| */ |
| dp = args->dp; |
| args->blkno = 0; |
| error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, -1, &bp); |
| if (error) |
| return error; |
| |
| /* |
| * Look up the given attribute in the leaf block. Figure out if |
| * the given flags produce an error or call for an atomic rename. |
| */ |
| retval = xfs_attr3_leaf_lookup_int(bp, args); |
| if ((args->flags & ATTR_REPLACE) && (retval == ENOATTR)) { |
| xfs_trans_brelse(args->trans, bp); |
| return retval; |
| } else if (retval == EEXIST) { |
| if (args->flags & ATTR_CREATE) { /* pure create op */ |
| xfs_trans_brelse(args->trans, bp); |
| return retval; |
| } |
| |
| trace_xfs_attr_leaf_replace(args); |
| |
| args->op_flags |= XFS_DA_OP_RENAME; /* an atomic rename */ |
| args->blkno2 = args->blkno; /* set 2nd entry info*/ |
| args->index2 = args->index; |
| args->rmtblkno2 = args->rmtblkno; |
| args->rmtblkcnt2 = args->rmtblkcnt; |
| } |
| |
| /* |
| * Add the attribute to the leaf block, transitioning to a Btree |
| * if required. |
| */ |
| retval = xfs_attr3_leaf_add(bp, args); |
| if (retval == ENOSPC) { |
| /* |
| * Promote the attribute list to the Btree format, then |
| * Commit that transaction so that the node_addname() call |
| * can manage its own transactions. |
| */ |
| xfs_bmap_init(args->flist, args->firstblock); |
| error = xfs_attr3_leaf_to_node(args); |
| if (!error) { |
| error = xfs_bmap_finish(&args->trans, args->flist, |
| &committed); |
| } |
| if (error) { |
| ASSERT(committed); |
| args->trans = NULL; |
| xfs_bmap_cancel(args->flist); |
| return(error); |
| } |
| |
| /* |
| * bmap_finish() may have committed the last trans and started |
| * a new one. We need the inode to be in all transactions. |
| */ |
| if (committed) |
| xfs_trans_ijoin(args->trans, dp, 0); |
| |
| /* |
| * Commit the current trans (including the inode) and start |
| * a new one. |
| */ |
| error = xfs_trans_roll(&args->trans, dp); |
| if (error) |
| return (error); |
| |
| /* |
| * Fob the whole rest of the problem off on the Btree code. |
| */ |
| error = xfs_attr_node_addname(args); |
| return(error); |
| } |
| |
| /* |
| * Commit the transaction that added the attr name so that |
| * later routines can manage their own transactions. |
| */ |
| error = xfs_trans_roll(&args->trans, dp); |
| if (error) |
| return (error); |
| |
| /* |
| * If there was an out-of-line value, allocate the blocks we |
| * identified for its storage and copy the value. This is done |
| * after we create the attribute so that we don't overflow the |
| * maximum size of a transaction and/or hit a deadlock. |
| */ |
| if (args->rmtblkno > 0) { |
| error = xfs_attr_rmtval_set(args); |
| if (error) |
| return(error); |
| } |
| |
| /* |
| * If this is an atomic rename operation, we must "flip" the |
| * incomplete flags on the "new" and "old" attribute/value pairs |
| * so that one disappears and one appears atomically. Then we |
| * must remove the "old" attribute/value pair. |
| */ |
| if (args->op_flags & XFS_DA_OP_RENAME) { |
| /* |
| * In a separate transaction, set the incomplete flag on the |
| * "old" attr and clear the incomplete flag on the "new" attr. |
| */ |
| error = xfs_attr3_leaf_flipflags(args); |
| if (error) |
| return(error); |
| |
| /* |
| * Dismantle the "old" attribute/value pair by removing |
| * a "remote" value (if it exists). |
| */ |
| args->index = args->index2; |
| args->blkno = args->blkno2; |
| args->rmtblkno = args->rmtblkno2; |
| args->rmtblkcnt = args->rmtblkcnt2; |
| if (args->rmtblkno) { |
| error = xfs_attr_rmtval_remove(args); |
| if (error) |
| return(error); |
| } |
| |
| /* |
| * Read in the block containing the "old" attr, then |
| * remove the "old" attr from that block (neat, huh!) |
| */ |
| error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, |
| -1, &bp); |
| if (error) |
| return error; |
| |
| xfs_attr3_leaf_remove(bp, args); |
| |
| /* |
| * If the result is small enough, shrink it all into the inode. |
| */ |
| if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { |
| xfs_bmap_init(args->flist, args->firstblock); |
| error = xfs_attr3_leaf_to_shortform(bp, args, forkoff); |
| /* bp is gone due to xfs_da_shrink_inode */ |
| if (!error) { |
| error = xfs_bmap_finish(&args->trans, |
| args->flist, |
| &committed); |
| } |
| if (error) { |
| ASSERT(committed); |
| args->trans = NULL; |
| xfs_bmap_cancel(args->flist); |
| return(error); |
| } |
| |
| /* |
| * bmap_finish() may have committed the last trans |
| * and started a new one. We need the inode to be |
| * in all transactions. |
| */ |
| if (committed) |
| xfs_trans_ijoin(args->trans, dp, 0); |
| } |
| |
| /* |
| * Commit the remove and start the next trans in series. |
| */ |
| error = xfs_trans_roll(&args->trans, dp); |
| |
| } else if (args->rmtblkno > 0) { |
| /* |
| * Added a "remote" value, just clear the incomplete flag. |
| */ |
| error = xfs_attr3_leaf_clearflag(args); |
| } |
| return error; |
| } |
| |
| /* |
| * Remove a name from the leaf attribute list structure |
| * |
| * This leaf block cannot have a "remote" value, we only call this routine |
| * if bmap_one_block() says there is only one block (ie: no remote blks). |
| */ |
| STATIC int |
| xfs_attr_leaf_removename(xfs_da_args_t *args) |
| { |
| xfs_inode_t *dp; |
| struct xfs_buf *bp; |
| int error, committed, forkoff; |
| |
| trace_xfs_attr_leaf_removename(args); |
| |
| /* |
| * Remove the attribute. |
| */ |
| dp = args->dp; |
| args->blkno = 0; |
| error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, -1, &bp); |
| if (error) |
| return error; |
| |
| error = xfs_attr3_leaf_lookup_int(bp, args); |
| if (error == ENOATTR) { |
| xfs_trans_brelse(args->trans, bp); |
| return error; |
| } |
| |
| xfs_attr3_leaf_remove(bp, args); |
| |
| /* |
| * If the result is small enough, shrink it all into the inode. |
| */ |
| if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { |
| xfs_bmap_init(args->flist, args->firstblock); |
| error = xfs_attr3_leaf_to_shortform(bp, args, forkoff); |
| /* bp is gone due to xfs_da_shrink_inode */ |
| if (!error) { |
| error = xfs_bmap_finish(&args->trans, args->flist, |
| &committed); |
| } |
| if (error) { |
| ASSERT(committed); |
| args->trans = NULL; |
| xfs_bmap_cancel(args->flist); |
| return error; |
| } |
| |
| /* |
| * bmap_finish() may have committed the last trans and started |
| * a new one. We need the inode to be in all transactions. |
| */ |
| if (committed) |
| xfs_trans_ijoin(args->trans, dp, 0); |
| } |
| return 0; |
| } |
| |
| /* |
| * Look up a name in a leaf attribute list structure. |
| * |
| * This leaf block cannot have a "remote" value, we only call this routine |
| * if bmap_one_block() says there is only one block (ie: no remote blks). |
| */ |
| STATIC int |
| xfs_attr_leaf_get(xfs_da_args_t *args) |
| { |
| struct xfs_buf *bp; |
| int error; |
| |
| trace_xfs_attr_leaf_get(args); |
| |
| args->blkno = 0; |
| error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, -1, &bp); |
| if (error) |
| return error; |
| |
| error = xfs_attr3_leaf_lookup_int(bp, args); |
| if (error != EEXIST) { |
| xfs_trans_brelse(args->trans, bp); |
| return error; |
| } |
| error = xfs_attr3_leaf_getvalue(bp, args); |
| xfs_trans_brelse(args->trans, bp); |
| if (!error && (args->rmtblkno > 0) && !(args->flags & ATTR_KERNOVAL)) { |
| error = xfs_attr_rmtval_get(args); |
| } |
| return error; |
| } |
| |
| /*======================================================================== |
| * External routines when attribute list size > XFS_LBSIZE(mp). |
| *========================================================================*/ |
| |
| /* |
| * Add a name to a Btree-format attribute list. |
| * |
| * This will involve walking down the Btree, and may involve splitting |
| * leaf nodes and even splitting intermediate nodes up to and including |
| * the root node (a special case of an intermediate node). |
| * |
| * "Remote" attribute values confuse the issue and atomic rename operations |
| * add a whole extra layer of confusion on top of that. |
| */ |
| STATIC int |
| xfs_attr_node_addname(xfs_da_args_t *args) |
| { |
| xfs_da_state_t *state; |
| xfs_da_state_blk_t *blk; |
| xfs_inode_t *dp; |
| xfs_mount_t *mp; |
| int committed, retval, error; |
| |
| trace_xfs_attr_node_addname(args); |
| |
| /* |
| * Fill in bucket of arguments/results/context to carry around. |
| */ |
| dp = args->dp; |
| mp = dp->i_mount; |
| restart: |
| state = xfs_da_state_alloc(); |
| state->args = args; |
| state->mp = mp; |
| state->blocksize = state->mp->m_sb.sb_blocksize; |
| state->node_ents = state->mp->m_attr_node_ents; |
| |
| /* |
| * Search to see if name already exists, and get back a pointer |
| * to where it should go. |
| */ |
| error = xfs_da3_node_lookup_int(state, &retval); |
| if (error) |
| goto out; |
| blk = &state->path.blk[ state->path.active-1 ]; |
| ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC); |
| if ((args->flags & ATTR_REPLACE) && (retval == ENOATTR)) { |
| goto out; |
| } else if (retval == EEXIST) { |
| if (args->flags & ATTR_CREATE) |
| goto out; |
| |
| trace_xfs_attr_node_replace(args); |
| |
| args->op_flags |= XFS_DA_OP_RENAME; /* atomic rename op */ |
| args->blkno2 = args->blkno; /* set 2nd entry info*/ |
| args->index2 = args->index; |
| args->rmtblkno2 = args->rmtblkno; |
| args->rmtblkcnt2 = args->rmtblkcnt; |
| args->rmtblkno = 0; |
| args->rmtblkcnt = 0; |
| } |
| |
| retval = xfs_attr3_leaf_add(blk->bp, state->args); |
| if (retval == ENOSPC) { |
| if (state->path.active == 1) { |
| /* |
| * Its really a single leaf node, but it had |
| * out-of-line values so it looked like it *might* |
| * have been a b-tree. |
| */ |
| xfs_da_state_free(state); |
| xfs_bmap_init(args->flist, args->firstblock); |
| error = xfs_attr3_leaf_to_node(args); |
| if (!error) { |
| error = xfs_bmap_finish(&args->trans, |
| args->flist, |
| &committed); |
| } |
| if (error) { |
| ASSERT(committed); |
| args->trans = NULL; |
| xfs_bmap_cancel(args->flist); |
| goto out; |
| } |
| |
| /* |
| * bmap_finish() may have committed the last trans |
| * and started a new one. We need the inode to be |
| * in all transactions. |
| */ |
| if (committed) |
| xfs_trans_ijoin(args->trans, dp, 0); |
| |
| /* |
| * Commit the node conversion and start the next |
| * trans in the chain. |
| */ |
| error = xfs_trans_roll(&args->trans, dp); |
| if (error) |
| goto out; |
| |
| goto restart; |
| } |
| |
| /* |
| * Split as many Btree elements as required. |
| * This code tracks the new and old attr's location |
| * in the index/blkno/rmtblkno/rmtblkcnt fields and |
| * in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields. |
| */ |
| xfs_bmap_init(args->flist, args->firstblock); |
| error = xfs_da3_split(state); |
| if (!error) { |
| error = xfs_bmap_finish(&args->trans, args->flist, |
| &committed); |
| } |
| if (error) { |
| ASSERT(committed); |
| args->trans = NULL; |
| xfs_bmap_cancel(args->flist); |
| goto out; |
| } |
| |
| /* |
| * bmap_finish() may have committed the last trans and started |
| * a new one. We need the inode to be in all transactions. |
| */ |
| if (committed) |
| xfs_trans_ijoin(args->trans, dp, 0); |
| } else { |
| /* |
| * Addition succeeded, update Btree hashvals. |
| */ |
| xfs_da3_fixhashpath(state, &state->path); |
| } |
| |
| /* |
| * Kill the state structure, we're done with it and need to |
| * allow the buffers to come back later. |
| */ |
| xfs_da_state_free(state); |
| state = NULL; |
| |
| /* |
| * Commit the leaf addition or btree split and start the next |
| * trans in the chain. |
| */ |
| error = xfs_trans_roll(&args->trans, dp); |
| if (error) |
| goto out; |
| |
| /* |
| * If there was an out-of-line value, allocate the blocks we |
| * identified for its storage and copy the value. This is done |
| * after we create the attribute so that we don't overflow the |
| * maximum size of a transaction and/or hit a deadlock. |
| */ |
| if (args->rmtblkno > 0) { |
| error = xfs_attr_rmtval_set(args); |
| if (error) |
| return(error); |
| } |
| |
| /* |
| * If this is an atomic rename operation, we must "flip" the |
| * incomplete flags on the "new" and "old" attribute/value pairs |
| * so that one disappears and one appears atomically. Then we |
| * must remove the "old" attribute/value pair. |
| */ |
| if (args->op_flags & XFS_DA_OP_RENAME) { |
| /* |
| * In a separate transaction, set the incomplete flag on the |
| * "old" attr and clear the incomplete flag on the "new" attr. |
| */ |
| error = xfs_attr3_leaf_flipflags(args); |
| if (error) |
| goto out; |
| |
| /* |
| * Dismantle the "old" attribute/value pair by removing |
| * a "remote" value (if it exists). |
| */ |
| args->index = args->index2; |
| args->blkno = args->blkno2; |
| args->rmtblkno = args->rmtblkno2; |
| args->rmtblkcnt = args->rmtblkcnt2; |
| if (args->rmtblkno) { |
| error = xfs_attr_rmtval_remove(args); |
| if (error) |
| return(error); |
| } |
| |
| /* |
| * Re-find the "old" attribute entry after any split ops. |
| * The INCOMPLETE flag means that we will find the "old" |
| * attr, not the "new" one. |
| */ |
| args->flags |= XFS_ATTR_INCOMPLETE; |
| state = xfs_da_state_alloc(); |
| state->args = args; |
| state->mp = mp; |
| state->blocksize = state->mp->m_sb.sb_blocksize; |
| state->node_ents = state->mp->m_attr_node_ents; |
| state->inleaf = 0; |
| error = xfs_da3_node_lookup_int(state, &retval); |
| if (error) |
| goto out; |
| |
| /* |
| * Remove the name and update the hashvals in the tree. |
| */ |
| blk = &state->path.blk[ state->path.active-1 ]; |
| ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC); |
| error = xfs_attr3_leaf_remove(blk->bp, args); |
| xfs_da3_fixhashpath(state, &state->path); |
| |
| /* |
| * Check to see if the tree needs to be collapsed. |
| */ |
| if (retval && (state->path.active > 1)) { |
| xfs_bmap_init(args->flist, args->firstblock); |
| error = xfs_da3_join(state); |
| if (!error) { |
| error = xfs_bmap_finish(&args->trans, |
| args->flist, |
| &committed); |
| } |
| if (error) { |
| ASSERT(committed); |
| args->trans = NULL; |
| xfs_bmap_cancel(args->flist); |
| goto out; |
| } |
| |
| /* |
| * bmap_finish() may have committed the last trans |
| * and started a new one. We need the inode to be |
| * in all transactions. |
| */ |
| if (committed) |
| xfs_trans_ijoin(args->trans, dp, 0); |
| } |
| |
| /* |
| * Commit and start the next trans in the chain. |
| */ |
| error = xfs_trans_roll(&args->trans, dp); |
| if (error) |
| goto out; |
| |
| } else if (args->rmtblkno > 0) { |
| /* |
| * Added a "remote" value, just clear the incomplete flag. |
| */ |
| error = xfs_attr3_leaf_clearflag(args); |
| if (error) |
| goto out; |
| } |
| retval = error = 0; |
| |
| out: |
| if (state) |
| xfs_da_state_free(state); |
| if (error) |
| return(error); |
| return(retval); |
| } |
| |
| /* |
| * Remove a name from a B-tree attribute list. |
| * |
| * This will involve walking down the Btree, and may involve joining |
| * leaf nodes and even joining intermediate nodes up to and including |
| * the root node (a special case of an intermediate node). |
| */ |
| STATIC int |
| xfs_attr_node_removename(xfs_da_args_t *args) |
| { |
| xfs_da_state_t *state; |
| xfs_da_state_blk_t *blk; |
| xfs_inode_t *dp; |
| struct xfs_buf *bp; |
| int retval, error, committed, forkoff; |
| |
| trace_xfs_attr_node_removename(args); |
| |
| /* |
| * Tie a string around our finger to remind us where we are. |
| */ |
| dp = args->dp; |
| state = xfs_da_state_alloc(); |
| state->args = args; |
| state->mp = dp->i_mount; |
| state->blocksize = state->mp->m_sb.sb_blocksize; |
| state->node_ents = state->mp->m_attr_node_ents; |
| |
| /* |
| * Search to see if name exists, and get back a pointer to it. |
| */ |
| error = xfs_da3_node_lookup_int(state, &retval); |
| if (error || (retval != EEXIST)) { |
| if (error == 0) |
| error = retval; |
| goto out; |
| } |
| |
| /* |
| * If there is an out-of-line value, de-allocate the blocks. |
| * This is done before we remove the attribute so that we don't |
| * overflow the maximum size of a transaction and/or hit a deadlock. |
| */ |
| blk = &state->path.blk[ state->path.active-1 ]; |
| ASSERT(blk->bp != NULL); |
| ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC); |
| if (args->rmtblkno > 0) { |
| /* |
| * Fill in disk block numbers in the state structure |
| * so that we can get the buffers back after we commit |
| * several transactions in the following calls. |
| */ |
| error = xfs_attr_fillstate(state); |
| if (error) |
| goto out; |
| |
| /* |
| * Mark the attribute as INCOMPLETE, then bunmapi() the |
| * remote value. |
| */ |
| error = xfs_attr3_leaf_setflag(args); |
| if (error) |
| goto out; |
| error = xfs_attr_rmtval_remove(args); |
| if (error) |
| goto out; |
| |
| /* |
| * Refill the state structure with buffers, the prior calls |
| * released our buffers. |
| */ |
| error = xfs_attr_refillstate(state); |
| if (error) |
| goto out; |
| } |
| |
| /* |
| * Remove the name and update the hashvals in the tree. |
| */ |
| blk = &state->path.blk[ state->path.active-1 ]; |
| ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC); |
| retval = xfs_attr3_leaf_remove(blk->bp, args); |
| xfs_da3_fixhashpath(state, &state->path); |
| |
| /* |
| * Check to see if the tree needs to be collapsed. |
| */ |
| if (retval && (state->path.active > 1)) { |
| xfs_bmap_init(args->flist, args->firstblock); |
| error = xfs_da3_join(state); |
| if (!error) { |
| error = xfs_bmap_finish(&args->trans, args->flist, |
| &committed); |
| } |
| if (error) { |
| ASSERT(committed); |
| args->trans = NULL; |
| xfs_bmap_cancel(args->flist); |
| goto out; |
| } |
| |
| /* |
| * bmap_finish() may have committed the last trans and started |
| * a new one. We need the inode to be in all transactions. |
| */ |
| if (committed) |
| xfs_trans_ijoin(args->trans, dp, 0); |
| |
| /* |
| * Commit the Btree join operation and start a new trans. |
| */ |
| error = xfs_trans_roll(&args->trans, dp); |
| if (error) |
| goto out; |
| } |
| |
| /* |
| * If the result is small enough, push it all into the inode. |
| */ |
| if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) { |
| /* |
| * Have to get rid of the copy of this dabuf in the state. |
| */ |
| ASSERT(state->path.active == 1); |
| ASSERT(state->path.blk[0].bp); |
| state->path.blk[0].bp = NULL; |
| |
| error = xfs_attr3_leaf_read(args->trans, args->dp, 0, -1, &bp); |
| if (error) |
| goto out; |
| |
| if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { |
| xfs_bmap_init(args->flist, args->firstblock); |
| error = xfs_attr3_leaf_to_shortform(bp, args, forkoff); |
| /* bp is gone due to xfs_da_shrink_inode */ |
| if (!error) { |
| error = xfs_bmap_finish(&args->trans, |
| args->flist, |
| &committed); |
| } |
| if (error) { |
| ASSERT(committed); |
| args->trans = NULL; |
| xfs_bmap_cancel(args->flist); |
| goto out; |
| } |
| |
| /* |
| * bmap_finish() may have committed the last trans |
| * and started a new one. We need the inode to be |
| * in all transactions. |
| */ |
| if (committed) |
| xfs_trans_ijoin(args->trans, dp, 0); |
| } else |
| xfs_trans_brelse(args->trans, bp); |
| } |
| error = 0; |
| |
| out: |
| xfs_da_state_free(state); |
| return(error); |
| } |
| |
| /* |
| * Fill in the disk block numbers in the state structure for the buffers |
| * that are attached to the state structure. |
| * This is done so that we can quickly reattach ourselves to those buffers |
| * after some set of transaction commits have released these buffers. |
| */ |
| STATIC int |
| xfs_attr_fillstate(xfs_da_state_t *state) |
| { |
| xfs_da_state_path_t *path; |
| xfs_da_state_blk_t *blk; |
| int level; |
| |
| trace_xfs_attr_fillstate(state->args); |
| |
| /* |
| * Roll down the "path" in the state structure, storing the on-disk |
| * block number for those buffers in the "path". |
| */ |
| path = &state->path; |
| ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH)); |
| for (blk = path->blk, level = 0; level < path->active; blk++, level++) { |
| if (blk->bp) { |
| blk->disk_blkno = XFS_BUF_ADDR(blk->bp); |
| blk->bp = NULL; |
| } else { |
| blk->disk_blkno = 0; |
| } |
| } |
| |
| /* |
| * Roll down the "altpath" in the state structure, storing the on-disk |
| * block number for those buffers in the "altpath". |
| */ |
| path = &state->altpath; |
| ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH)); |
| for (blk = path->blk, level = 0; level < path->active; blk++, level++) { |
| if (blk->bp) { |
| blk->disk_blkno = XFS_BUF_ADDR(blk->bp); |
| blk->bp = NULL; |
| } else { |
| blk->disk_blkno = 0; |
| } |
| } |
| |
| return(0); |
| } |
| |
| /* |
| * Reattach the buffers to the state structure based on the disk block |
| * numbers stored in the state structure. |
| * This is done after some set of transaction commits have released those |
| * buffers from our grip. |
| */ |
| STATIC int |
| xfs_attr_refillstate(xfs_da_state_t *state) |
| { |
| xfs_da_state_path_t *path; |
| xfs_da_state_blk_t *blk; |
| int level, error; |
| |
| trace_xfs_attr_refillstate(state->args); |
| |
| /* |
| * Roll down the "path" in the state structure, storing the on-disk |
| * block number for those buffers in the "path". |
| */ |
| path = &state->path; |
| ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH)); |
| for (blk = path->blk, level = 0; level < path->active; blk++, level++) { |
| if (blk->disk_blkno) { |
| error = xfs_da3_node_read(state->args->trans, |
| state->args->dp, |
| blk->blkno, blk->disk_blkno, |
| &blk->bp, XFS_ATTR_FORK); |
| if (error) |
| return(error); |
| } else { |
| blk->bp = NULL; |
| } |
| } |
| |
| /* |
| * Roll down the "altpath" in the state structure, storing the on-disk |
| * block number for those buffers in the "altpath". |
| */ |
| path = &state->altpath; |
| ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH)); |
| for (blk = path->blk, level = 0; level < path->active; blk++, level++) { |
| if (blk->disk_blkno) { |
| error = xfs_da3_node_read(state->args->trans, |
| state->args->dp, |
| blk->blkno, blk->disk_blkno, |
| &blk->bp, XFS_ATTR_FORK); |
| if (error) |
| return(error); |
| } else { |
| blk->bp = NULL; |
| } |
| } |
| |
| return(0); |
| } |
| |
| /* |
| * Look up a filename in a node attribute list. |
| * |
| * This routine gets called for any attribute fork that has more than one |
| * block, ie: both true Btree attr lists and for single-leaf-blocks with |
| * "remote" values taking up more blocks. |
| */ |
| STATIC int |
| xfs_attr_node_get(xfs_da_args_t *args) |
| { |
| xfs_da_state_t *state; |
| xfs_da_state_blk_t *blk; |
| int error, retval; |
| int i; |
| |
| trace_xfs_attr_node_get(args); |
| |
| state = xfs_da_state_alloc(); |
| state->args = args; |
| state->mp = args->dp->i_mount; |
| state->blocksize = state->mp->m_sb.sb_blocksize; |
| state->node_ents = state->mp->m_attr_node_ents; |
| |
| /* |
| * Search to see if name exists, and get back a pointer to it. |
| */ |
| error = xfs_da3_node_lookup_int(state, &retval); |
| if (error) { |
| retval = error; |
| } else if (retval == EEXIST) { |
| blk = &state->path.blk[ state->path.active-1 ]; |
| ASSERT(blk->bp != NULL); |
| ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC); |
| |
| /* |
| * Get the value, local or "remote" |
| */ |
| retval = xfs_attr3_leaf_getvalue(blk->bp, args); |
| if (!retval && (args->rmtblkno > 0) |
| && !(args->flags & ATTR_KERNOVAL)) { |
| retval = xfs_attr_rmtval_get(args); |
| } |
| } |
| |
| /* |
| * If not in a transaction, we have to release all the buffers. |
| */ |
| for (i = 0; i < state->path.active; i++) { |
| xfs_trans_brelse(args->trans, state->path.blk[i].bp); |
| state->path.blk[i].bp = NULL; |
| } |
| |
| xfs_da_state_free(state); |
| return(retval); |
| } |