| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 NXP |
| * Copyright (C) 2019 Boundary Devices |
| * Copyright (C) 2020 Amarula Solutions(India) |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| |
| /* registers */ |
| #define PF8X00_DEVICEID 0x00 |
| #define PF8X00_REVID 0x01 |
| #define PF8X00_EMREV 0x02 |
| #define PF8X00_PROGID 0x03 |
| #define PF8X00_IMS_INT 0x04 |
| #define PF8X00_IMS_THERM 0x07 |
| #define PF8X00_SW_MODE_INT 0x0a |
| #define PF8X00_SW_MODE_MASK 0x0b |
| #define PF8X00_IMS_SW_ILIM 0x12 |
| #define PF8X00_IMS_LDO_ILIM 0x15 |
| #define PF8X00_IMS_SW_UV 0x18 |
| #define PF8X00_IMS_SW_OV 0x1b |
| #define PF8X00_IMS_LDO_UV 0x1e |
| #define PF8X00_IMS_LDO_OV 0x21 |
| #define PF8X00_IMS_PWRON 0x24 |
| #define PF8X00_SYS_INT 0x27 |
| #define PF8X00_HARD_FAULT 0x29 |
| #define PF8X00_FSOB_FLAGS 0x2a |
| #define PF8X00_FSOB_SELECT 0x2b |
| #define PF8X00_ABIST_OV1 0x2c |
| #define PF8X00_ABIST_OV2 0x2d |
| #define PF8X00_ABIST_UV1 0x2e |
| #define PF8X00_ABIST_UV2 0x2f |
| #define PF8X00_TEST_FLAGS 0x30 |
| #define PF8X00_ABIST_RUN 0x31 |
| #define PF8X00_RANDOM_GEN 0x33 |
| #define PF8X00_RANDOM_CHK 0x34 |
| #define PF8X00_VMONEN1 0x35 |
| #define PF8X00_VMONEN2 0x36 |
| #define PF8X00_CTRL1 0x37 |
| #define PF8X00_CTRL2 0x38 |
| #define PF8X00_CTRL3 0x39 |
| #define PF8X00_PWRUP_CTRL 0x3a |
| #define PF8X00_RESETBMCU 0x3c |
| #define PF8X00_PGOOD 0x3d |
| #define PF8X00_PWRDN_DLY1 0x3e |
| #define PF8X00_PWRDN_DLY2 0x3f |
| #define PF8X00_FREQ_CTRL 0x40 |
| #define PF8X00_COINCELL_CTRL 0x41 |
| #define PF8X00_PWRON 0x42 |
| #define PF8X00_WD_CONFIG 0x43 |
| #define PF8X00_WD_CLEAR 0x44 |
| #define PF8X00_WD_EXPIRE 0x45 |
| #define PF8X00_WD_COUNTER 0x46 |
| #define PF8X00_FAULT_COUNTER 0x47 |
| #define PF8X00_FSAFE_COUNTER 0x48 |
| #define PF8X00_FAULT_TIMER 0x49 |
| #define PF8X00_AMUX 0x4a |
| #define PF8X00_SW1_CONFIG1 0x4d |
| #define PF8X00_LDO1_CONFIG1 0x85 |
| #define PF8X00_VSNVS_CONFIG1 0x9d |
| #define PF8X00_PAGE_SELECT 0x9f |
| |
| /* regulators */ |
| enum pf8x00_regulators { |
| PF8X00_LDO1, |
| PF8X00_LDO2, |
| PF8X00_LDO3, |
| PF8X00_LDO4, |
| PF8X00_BUCK1, |
| PF8X00_BUCK2, |
| PF8X00_BUCK3, |
| PF8X00_BUCK4, |
| PF8X00_BUCK5, |
| PF8X00_BUCK6, |
| PF8X00_BUCK7, |
| PF8X00_VSNVS, |
| |
| PF8X00_MAX_REGULATORS, |
| }; |
| |
| enum pf8x00_buck_states { |
| SW_CONFIG1, |
| SW_CONFIG2, |
| SW_PWRUP, |
| SW_MODE1, |
| SW_RUN_VOLT, |
| SW_STBY_VOLT, |
| }; |
| #define PF8X00_SW_BASE(i) (8 * (i - PF8X00_BUCK1) + PF8X00_SW1_CONFIG1) |
| |
| enum pf8x00_ldo_states { |
| LDO_CONFIG1, |
| LDO_CONFIG2, |
| LDO_PWRUP, |
| LDO_RUN_VOLT, |
| LDO_STBY_VOLT, |
| }; |
| #define PF8X00_LDO_BASE(i) (6 * (i - PF8X00_LDO1) + PF8X00_LDO1_CONFIG1) |
| |
| enum swxilim_bits { |
| SWXILIM_2100_MA, |
| SWXILIM_2600_MA, |
| SWXILIM_3000_MA, |
| SWXILIM_4500_MA, |
| }; |
| #define PF8X00_SWXILIM_SHIFT 3 |
| #define PF8X00_SWXILIM_MASK GENMASK(4, 3) |
| #define PF8X00_SWXPHASE_MASK GENMASK(2, 0) |
| #define PF8X00_SWXPHASE_DEFAULT 0 |
| #define PF8X00_SWXPHASE_SHIFT 7 |
| |
| enum pf8x00_devid { |
| PF8100 = 0x0, |
| PF8121A = BIT(1), |
| PF8200 = BIT(3), |
| }; |
| #define PF8X00_FAM BIT(6) |
| #define PF8X00_DEVICE_FAM_MASK GENMASK(7, 4) |
| #define PF8X00_DEVICE_ID_MASK GENMASK(3, 0) |
| |
| struct pf8x00_regulator { |
| struct regulator_desc desc; |
| u8 ilim; |
| u8 phase_shift; |
| }; |
| |
| struct pf8x00_chip { |
| struct regmap *regmap; |
| struct device *dev; |
| }; |
| |
| static const struct regmap_config pf8x00_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = PF8X00_PAGE_SELECT, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| /* VLDOx output: 1.5V to 5.0V */ |
| static const int pf8x00_ldo_voltages[] = { |
| 1500000, 1600000, 1800000, 1850000, 2150000, 2500000, 2800000, 3000000, |
| 3100000, 3150000, 3200000, 3300000, 3350000, 1650000, 1700000, 5000000, |
| }; |
| |
| #define SWV(i) (6250 * i + 400000) |
| #define SWV_LINE(i) SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \ |
| SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7) |
| |
| /* Output: 0.4V to 1.8V */ |
| static const int pf8x00_sw1_to_6_voltages[] = { |
| SWV_LINE(0), |
| SWV_LINE(1), |
| SWV_LINE(2), |
| SWV_LINE(3), |
| SWV_LINE(4), |
| SWV_LINE(5), |
| SWV_LINE(6), |
| SWV_LINE(7), |
| SWV_LINE(8), |
| SWV_LINE(9), |
| SWV_LINE(10), |
| SWV_LINE(11), |
| SWV_LINE(12), |
| SWV_LINE(13), |
| SWV_LINE(14), |
| SWV_LINE(15), |
| SWV_LINE(16), |
| SWV_LINE(17), |
| SWV_LINE(18), |
| SWV_LINE(19), |
| SWV_LINE(20), |
| SWV_LINE(21), |
| 1500000, 1800000, |
| }; |
| |
| /* Output: 1.0V to 4.1V */ |
| static const int pf8x00_sw7_voltages[] = { |
| 1000000, 1100000, 1200000, 1250000, 1300000, 1350000, 1500000, 1600000, |
| 1800000, 1850000, 2000000, 2100000, 2150000, 2250000, 2300000, 2400000, |
| 2500000, 2800000, 3150000, 3200000, 3250000, 3300000, 3350000, 3400000, |
| 3500000, 3800000, 4000000, 4100000, 4100000, 4100000, 4100000, 4100000, |
| }; |
| |
| /* Output: 1.8V, 3.0V, or 3.3V */ |
| static const int pf8x00_vsnvs_voltages[] = { |
| 0, 1800000, 3000000, 3300000, |
| }; |
| |
| static struct pf8x00_regulator *desc_to_regulator(const struct regulator_desc *desc) |
| { |
| return container_of(desc, struct pf8x00_regulator, desc); |
| } |
| |
| static void swxilim_select(const struct regulator_desc *desc, int ilim) |
| { |
| struct pf8x00_regulator *data = desc_to_regulator(desc); |
| u8 ilim_sel; |
| |
| switch (ilim) { |
| case 2100: |
| ilim_sel = SWXILIM_2100_MA; |
| break; |
| case 2600: |
| ilim_sel = SWXILIM_2600_MA; |
| break; |
| case 3000: |
| ilim_sel = SWXILIM_3000_MA; |
| break; |
| case 4500: |
| ilim_sel = SWXILIM_4500_MA; |
| break; |
| default: |
| ilim_sel = SWXILIM_2100_MA; |
| break; |
| } |
| |
| data->ilim = ilim_sel; |
| } |
| |
| static int pf8x00_of_parse_cb(struct device_node *np, |
| const struct regulator_desc *desc, |
| struct regulator_config *config) |
| { |
| struct pf8x00_regulator *data = desc_to_regulator(desc); |
| struct pf8x00_chip *chip = config->driver_data; |
| int phase; |
| int val; |
| int ret; |
| |
| ret = of_property_read_u32(np, "nxp,ilim-ma", &val); |
| if (ret) |
| dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use 2100 mA\n", |
| desc->id - PF8X00_LDO4); |
| |
| swxilim_select(desc, val); |
| |
| ret = of_property_read_u32(np, "nxp,phase-shift", &val); |
| if (ret) { |
| dev_dbg(chip->dev, |
| "unspecified phase-shift for BUCK%d, use 0 degrees\n", |
| desc->id - PF8X00_LDO4); |
| val = PF8X00_SWXPHASE_DEFAULT; |
| } |
| |
| phase = val / 45; |
| if ((phase * 45) != val) { |
| dev_warn(config->dev, |
| "invalid phase_shift %d for BUCK%d, use 0 degrees\n", |
| (phase * 45), desc->id - PF8X00_LDO4); |
| phase = PF8X00_SWXPHASE_SHIFT; |
| } |
| |
| data->phase_shift = (phase >= 1) ? phase - 1 : PF8X00_SWXPHASE_SHIFT; |
| |
| return 0; |
| } |
| |
| static const struct regulator_ops pf8x00_ldo_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_table, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| }; |
| |
| static const struct regulator_ops pf8x00_buck_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_table, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| }; |
| |
| static const struct regulator_ops pf8x00_vsnvs_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| }; |
| |
| #define PF8X00LDO(_id, _name, base, voltages) \ |
| [PF8X00_LDO ## _id] = { \ |
| .desc = { \ |
| .name = _name, \ |
| .of_match = _name, \ |
| .regulators_node = "regulators", \ |
| .n_voltages = ARRAY_SIZE(voltages), \ |
| .ops = &pf8x00_ldo_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = PF8X00_LDO ## _id, \ |
| .owner = THIS_MODULE, \ |
| .volt_table = voltages, \ |
| .vsel_reg = (base) + LDO_RUN_VOLT, \ |
| .vsel_mask = 0xff, \ |
| .enable_reg = (base) + LDO_CONFIG2, \ |
| .enable_val = 0x2, \ |
| .disable_val = 0x0, \ |
| .enable_mask = 2, \ |
| }, \ |
| } |
| |
| #define PF8X00BUCK(_id, _name, base, voltages) \ |
| [PF8X00_BUCK ## _id] = { \ |
| .desc = { \ |
| .name = _name, \ |
| .of_match = _name, \ |
| .regulators_node = "regulators", \ |
| .of_parse_cb = pf8x00_of_parse_cb, \ |
| .n_voltages = ARRAY_SIZE(voltages), \ |
| .ops = &pf8x00_buck_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = PF8X00_BUCK ## _id, \ |
| .owner = THIS_MODULE, \ |
| .volt_table = voltages, \ |
| .vsel_reg = (base) + SW_RUN_VOLT, \ |
| .vsel_mask = 0xff, \ |
| .enable_reg = (base) + SW_MODE1, \ |
| .enable_val = 0x3, \ |
| .disable_val = 0x0, \ |
| .enable_mask = 0x3, \ |
| .enable_time = 500, \ |
| }, \ |
| } |
| |
| #define PF8X00VSNVS(_name, base, voltages) \ |
| [PF8X00_VSNVS] = { \ |
| .desc = { \ |
| .name = _name, \ |
| .of_match = _name, \ |
| .regulators_node = "regulators", \ |
| .n_voltages = ARRAY_SIZE(voltages), \ |
| .ops = &pf8x00_vsnvs_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .id = PF8X00_VSNVS, \ |
| .owner = THIS_MODULE, \ |
| .volt_table = voltages, \ |
| .vsel_reg = (base), \ |
| .vsel_mask = 0x3, \ |
| }, \ |
| } |
| |
| static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = { |
| PF8X00LDO(1, "ldo1", PF8X00_LDO_BASE(PF8X00_LDO1), pf8x00_ldo_voltages), |
| PF8X00LDO(2, "ldo2", PF8X00_LDO_BASE(PF8X00_LDO2), pf8x00_ldo_voltages), |
| PF8X00LDO(3, "ldo3", PF8X00_LDO_BASE(PF8X00_LDO3), pf8x00_ldo_voltages), |
| PF8X00LDO(4, "ldo4", PF8X00_LDO_BASE(PF8X00_LDO4), pf8x00_ldo_voltages), |
| PF8X00BUCK(1, "buck1", PF8X00_SW_BASE(PF8X00_BUCK1), pf8x00_sw1_to_6_voltages), |
| PF8X00BUCK(2, "buck2", PF8X00_SW_BASE(PF8X00_BUCK2), pf8x00_sw1_to_6_voltages), |
| PF8X00BUCK(3, "buck3", PF8X00_SW_BASE(PF8X00_BUCK3), pf8x00_sw1_to_6_voltages), |
| PF8X00BUCK(4, "buck4", PF8X00_SW_BASE(PF8X00_BUCK4), pf8x00_sw1_to_6_voltages), |
| PF8X00BUCK(5, "buck5", PF8X00_SW_BASE(PF8X00_BUCK5), pf8x00_sw1_to_6_voltages), |
| PF8X00BUCK(6, "buck6", PF8X00_SW_BASE(PF8X00_BUCK6), pf8x00_sw1_to_6_voltages), |
| PF8X00BUCK(7, "buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages), |
| PF8X00VSNVS("vsnvs", PF8X00_VSNVS_CONFIG1, pf8x00_vsnvs_voltages), |
| }; |
| |
| static int pf8x00_identify(struct pf8x00_chip *chip) |
| { |
| unsigned int value; |
| u8 dev_fam, dev_id; |
| const char *name = NULL; |
| int ret; |
| |
| ret = regmap_read(chip->regmap, PF8X00_DEVICEID, &value); |
| if (ret) { |
| dev_err(chip->dev, "failed to read chip family\n"); |
| return ret; |
| } |
| |
| dev_fam = value & PF8X00_DEVICE_FAM_MASK; |
| switch (dev_fam) { |
| case PF8X00_FAM: |
| break; |
| default: |
| dev_err(chip->dev, |
| "Chip 0x%x is not from PF8X00 family\n", dev_fam); |
| return ret; |
| } |
| |
| dev_id = value & PF8X00_DEVICE_ID_MASK; |
| switch (dev_id) { |
| case PF8100: |
| name = "PF8100"; |
| break; |
| case PF8121A: |
| name = "PF8121A"; |
| break; |
| case PF8200: |
| name = "PF8100"; |
| break; |
| default: |
| dev_err(chip->dev, "Unknown pf8x00 device id 0x%x\n", dev_id); |
| return -ENODEV; |
| } |
| |
| dev_info(chip->dev, "%s PMIC found.\n", name); |
| |
| return 0; |
| } |
| |
| static int pf8x00_i2c_probe(struct i2c_client *client) |
| { |
| struct regulator_config config = { NULL, }; |
| struct pf8x00_chip *chip; |
| int id; |
| int ret; |
| |
| chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, chip); |
| chip->dev = &client->dev; |
| |
| chip->regmap = devm_regmap_init_i2c(client, &pf8x00_regmap_config); |
| if (IS_ERR(chip->regmap)) { |
| ret = PTR_ERR(chip->regmap); |
| dev_err(&client->dev, |
| "regmap allocation failed with err %d\n", ret); |
| return ret; |
| } |
| |
| ret = pf8x00_identify(chip); |
| if (ret) |
| return ret; |
| |
| for (id = 0; id < ARRAY_SIZE(pf8x00_regulators_data); id++) { |
| struct pf8x00_regulator *data = &pf8x00_regulators_data[id]; |
| struct regulator_dev *rdev; |
| |
| config.dev = chip->dev; |
| config.driver_data = chip; |
| config.regmap = chip->regmap; |
| |
| rdev = devm_regulator_register(&client->dev, &data->desc, &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&client->dev, |
| "failed to register %s regulator\n", data->desc.name); |
| return PTR_ERR(rdev); |
| } |
| |
| if ((id >= PF8X00_BUCK1) && (id <= PF8X00_BUCK7)) { |
| u8 reg = PF8X00_SW_BASE(id) + SW_CONFIG2; |
| |
| regmap_update_bits(chip->regmap, reg, |
| PF8X00_SWXPHASE_MASK, |
| data->phase_shift); |
| |
| regmap_update_bits(chip->regmap, reg, |
| PF8X00_SWXILIM_MASK, |
| data->ilim << PF8X00_SWXILIM_SHIFT); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id pf8x00_dt_ids[] = { |
| { .compatible = "nxp,pf8100",}, |
| { .compatible = "nxp,pf8121a",}, |
| { .compatible = "nxp,pf8200",}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, pf8x00_dt_ids); |
| |
| static const struct i2c_device_id pf8x00_i2c_id[] = { |
| { "pf8100", 0 }, |
| { "pf8121a", 0 }, |
| { "pf8200", 0 }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(i2c, pf8x00_i2c_id); |
| |
| static struct i2c_driver pf8x00_regulator_driver = { |
| .id_table = pf8x00_i2c_id, |
| .driver = { |
| .name = "pf8x00", |
| .of_match_table = pf8x00_dt_ids, |
| }, |
| .probe_new = pf8x00_i2c_probe, |
| }; |
| module_i2c_driver(pf8x00_regulator_driver); |
| |
| MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); |
| MODULE_AUTHOR("Troy Kisky <troy.kisky@boundarydevices.com>"); |
| MODULE_DESCRIPTION("Regulator Driver for NXP's PF8100/PF8121A/PF8200 PMIC"); |
| MODULE_LICENSE("GPL v2"); |