| /* |
| * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. |
| * |
| * Author: Li Yang <LeoLi@freescale.com> |
| * Yin Olivia <Hong-hua.Yin@freescale.com> |
| * |
| * Description: |
| * MPC8360E MDS board specific routines. |
| * |
| * Changelog: |
| * Jun 21, 2006 Initial version |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/reboot.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/major.h> |
| #include <linux/console.h> |
| #include <linux/delay.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| #include <linux/initrd.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_device.h> |
| |
| #include <asm/system.h> |
| #include <asm/atomic.h> |
| #include <asm/time.h> |
| #include <asm/io.h> |
| #include <asm/machdep.h> |
| #include <asm/ipic.h> |
| #include <asm/irq.h> |
| #include <asm/prom.h> |
| #include <asm/udbg.h> |
| #include <sysdev/fsl_soc.h> |
| #include <asm/qe.h> |
| #include <asm/qe_ic.h> |
| |
| #include "mpc83xx.h" |
| |
| #undef DEBUG |
| #ifdef DEBUG |
| #define DBG(fmt...) udbg_printf(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| static u8 *bcsr_regs = NULL; |
| |
| /* ************************************************************************ |
| * |
| * Setup the architecture |
| * |
| */ |
| static void __init mpc836x_mds_setup_arch(void) |
| { |
| struct device_node *np; |
| |
| if (ppc_md.progress) |
| ppc_md.progress("mpc836x_mds_setup_arch()", 0); |
| |
| /* Map BCSR area */ |
| np = of_find_node_by_name(NULL, "bcsr"); |
| if (np != 0) { |
| struct resource res; |
| |
| of_address_to_resource(np, 0, &res); |
| bcsr_regs = ioremap(res.start, res.end - res.start +1); |
| of_node_put(np); |
| } |
| |
| #ifdef CONFIG_PCI |
| for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") |
| mpc83xx_add_bridge(np); |
| #endif |
| |
| #ifdef CONFIG_QUICC_ENGINE |
| qe_reset(); |
| |
| if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { |
| par_io_init(np); |
| of_node_put(np); |
| |
| for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;) |
| par_io_of_config(np); |
| } |
| |
| if ((np = of_find_compatible_node(NULL, "network", "ucc_geth")) |
| != NULL){ |
| uint svid; |
| |
| /* Reset the Ethernet PHY */ |
| #define BCSR9_GETHRST 0x20 |
| clrbits8(&bcsr_regs[9], BCSR9_GETHRST); |
| udelay(1000); |
| setbits8(&bcsr_regs[9], BCSR9_GETHRST); |
| |
| /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */ |
| svid = mfspr(SPRN_SVR); |
| if (svid == 0x80480021) { |
| void __iomem *immap; |
| |
| immap = ioremap(get_immrbase() + 0x14a8, 8); |
| |
| /* |
| * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2) |
| * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1) |
| */ |
| setbits32(immap, 0x0c003000); |
| |
| /* |
| * IMMR + 0x14AC[20:27] = 10101010 |
| * (data delay for both UCC's) |
| */ |
| clrsetbits_be32(immap + 4, 0xff0, 0xaa0); |
| |
| iounmap(immap); |
| } |
| |
| iounmap(bcsr_regs); |
| of_node_put(np); |
| } |
| #endif /* CONFIG_QUICC_ENGINE */ |
| } |
| |
| static struct of_device_id mpc836x_ids[] = { |
| { .type = "soc", }, |
| { .compatible = "soc", }, |
| { .type = "qe", }, |
| {}, |
| }; |
| |
| static int __init mpc836x_declare_of_platform_devices(void) |
| { |
| if (!machine_is(mpc836x_mds)) |
| return 0; |
| |
| /* Publish the QE devices */ |
| of_platform_bus_probe(NULL, mpc836x_ids, NULL); |
| |
| return 0; |
| } |
| device_initcall(mpc836x_declare_of_platform_devices); |
| |
| static void __init mpc836x_mds_init_IRQ(void) |
| { |
| struct device_node *np; |
| |
| np = of_find_node_by_type(NULL, "ipic"); |
| if (!np) |
| return; |
| |
| ipic_init(np, 0); |
| |
| /* Initialize the default interrupt mapping priorities, |
| * in case the boot rom changed something on us. |
| */ |
| ipic_set_default_priority(); |
| of_node_put(np); |
| |
| #ifdef CONFIG_QUICC_ENGINE |
| np = of_find_node_by_type(NULL, "qeic"); |
| if (!np) |
| return; |
| |
| qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic); |
| of_node_put(np); |
| #endif /* CONFIG_QUICC_ENGINE */ |
| } |
| |
| /* |
| * Called very early, MMU is off, device-tree isn't unflattened |
| */ |
| static int __init mpc836x_mds_probe(void) |
| { |
| unsigned long root = of_get_flat_dt_root(); |
| |
| return of_flat_dt_is_compatible(root, "MPC836xMDS"); |
| } |
| |
| define_machine(mpc836x_mds) { |
| .name = "MPC836x MDS", |
| .probe = mpc836x_mds_probe, |
| .setup_arch = mpc836x_mds_setup_arch, |
| .init_IRQ = mpc836x_mds_init_IRQ, |
| .get_irq = ipic_get_irq, |
| .restart = mpc83xx_restart, |
| .time_init = mpc83xx_time_init, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = udbg_progress, |
| }; |