| /* |
| * SMBus driver for ACPI Embedded Controller ($Revision: 1.3 $) |
| * |
| * Copyright (c) 2002, 2005 Ducrot Bruno |
| * Copyright (c) 2005 Rich Townsend (tiny hacks & tweaks) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation version 2. |
| */ |
| |
| #include <linux/version.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/stddef.h> |
| #include <linux/sched.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/acpi.h> |
| #include <linux/delay.h> |
| |
| #include "i2c_ec.h" |
| |
| #define xudelay(t) udelay(t) |
| #define xmsleep(t) msleep(t) |
| |
| #define ACPI_EC_HC_COMPONENT 0x00080000 |
| #define ACPI_EC_HC_CLASS "ec_hc_smbus" |
| #define ACPI_EC_HC_HID "ACPI0001" |
| #define ACPI_EC_HC_DRIVER_NAME "ACPI EC HC smbus driver" |
| #define ACPI_EC_HC_DEVICE_NAME "EC HC smbus" |
| |
| #define _COMPONENT ACPI_EC_HC_COMPONENT |
| |
| ACPI_MODULE_NAME("i2c_ec"); |
| |
| static int acpi_ec_hc_add(struct acpi_device *device); |
| static int acpi_ec_hc_remove(struct acpi_device *device, int type); |
| |
| static struct acpi_driver acpi_ec_hc_driver = { |
| .name = "i2c_ec", |
| .class = ACPI_EC_HC_CLASS, |
| .ids = ACPI_EC_HC_HID, |
| .ops = { |
| .add = acpi_ec_hc_add, |
| .remove = acpi_ec_hc_remove, |
| }, |
| }; |
| |
| /* Various bit mask for EC_SC (R) */ |
| #define OBF 0x01 |
| #define IBF 0x02 |
| #define CMD 0x08 |
| #define BURST 0x10 |
| #define SCI_EVT 0x20 |
| #define SMI_EVT 0x40 |
| |
| /* Commands for EC_SC (W) */ |
| #define RD_EC 0x80 |
| #define WR_EC 0x81 |
| #define BE_EC 0x82 |
| #define BD_EC 0x83 |
| #define QR_EC 0x84 |
| |
| /* |
| * ACPI 2.0 chapter 13 SMBus 2.0 EC register model |
| */ |
| |
| #define ACPI_EC_SMB_PRTCL 0x00 /* protocol, PEC */ |
| #define ACPI_EC_SMB_STS 0x01 /* status */ |
| #define ACPI_EC_SMB_ADDR 0x02 /* address */ |
| #define ACPI_EC_SMB_CMD 0x03 /* command */ |
| #define ACPI_EC_SMB_DATA 0x04 /* 32 data registers */ |
| #define ACPI_EC_SMB_BCNT 0x24 /* number of data bytes */ |
| #define ACPI_EC_SMB_ALRM_A 0x25 /* alarm address */ |
| #define ACPI_EC_SMB_ALRM_D 0x26 /* 2 bytes alarm data */ |
| |
| #define ACPI_EC_SMB_STS_DONE 0x80 |
| #define ACPI_EC_SMB_STS_ALRM 0x40 |
| #define ACPI_EC_SMB_STS_RES 0x20 |
| #define ACPI_EC_SMB_STS_STATUS 0x1f |
| |
| #define ACPI_EC_SMB_STATUS_OK 0x00 |
| #define ACPI_EC_SMB_STATUS_FAIL 0x07 |
| #define ACPI_EC_SMB_STATUS_DNAK 0x10 |
| #define ACPI_EC_SMB_STATUS_DERR 0x11 |
| #define ACPI_EC_SMB_STATUS_CMD_DENY 0x12 |
| #define ACPI_EC_SMB_STATUS_UNKNOWN 0x13 |
| #define ACPI_EC_SMB_STATUS_ACC_DENY 0x17 |
| #define ACPI_EC_SMB_STATUS_TIMEOUT 0x18 |
| #define ACPI_EC_SMB_STATUS_NOTSUP 0x19 |
| #define ACPI_EC_SMB_STATUS_BUSY 0x1A |
| #define ACPI_EC_SMB_STATUS_PEC 0x1F |
| |
| #define ACPI_EC_SMB_PRTCL_WRITE 0x00 |
| #define ACPI_EC_SMB_PRTCL_READ 0x01 |
| #define ACPI_EC_SMB_PRTCL_QUICK 0x02 |
| #define ACPI_EC_SMB_PRTCL_BYTE 0x04 |
| #define ACPI_EC_SMB_PRTCL_BYTE_DATA 0x06 |
| #define ACPI_EC_SMB_PRTCL_WORD_DATA 0x08 |
| #define ACPI_EC_SMB_PRTCL_BLOCK_DATA 0x0a |
| #define ACPI_EC_SMB_PRTCL_PROC_CALL 0x0c |
| #define ACPI_EC_SMB_PRTCL_BLOCK_PROC_CALL 0x0d |
| #define ACPI_EC_SMB_PRTCL_I2C_BLOCK_DATA 0x4a |
| #define ACPI_EC_SMB_PRTCL_PEC 0x80 |
| |
| /* Length of pre/post transaction sleep (msec) */ |
| #define ACPI_EC_SMB_TRANSACTION_SLEEP 1 |
| #define ACPI_EC_SMB_ACCESS_SLEEP1 1 |
| #define ACPI_EC_SMB_ACCESS_SLEEP2 10 |
| |
| static int acpi_ec_smb_read(struct acpi_ec_smbus *smbus, u8 address, u8 * data) |
| { |
| u8 val; |
| int err; |
| |
| err = ec_read(smbus->base + address, &val); |
| if (!err) { |
| *data = val; |
| } |
| xmsleep(ACPI_EC_SMB_TRANSACTION_SLEEP); |
| return (err); |
| } |
| |
| static int acpi_ec_smb_write(struct acpi_ec_smbus *smbus, u8 address, u8 data) |
| { |
| int err; |
| |
| err = ec_write(smbus->base + address, data); |
| return (err); |
| } |
| |
| static int |
| acpi_ec_smb_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, |
| char read_write, u8 command, int size, |
| union i2c_smbus_data *data) |
| { |
| struct acpi_ec_smbus *smbus = adap->algo_data; |
| unsigned char protocol, len = 0, pec, temp[2] = { 0, 0 }; |
| int i; |
| |
| if (read_write == I2C_SMBUS_READ) { |
| protocol = ACPI_EC_SMB_PRTCL_READ; |
| } else { |
| protocol = ACPI_EC_SMB_PRTCL_WRITE; |
| } |
| pec = (flags & I2C_CLIENT_PEC) ? ACPI_EC_SMB_PRTCL_PEC : 0; |
| |
| switch (size) { |
| |
| case I2C_SMBUS_QUICK: |
| protocol |= ACPI_EC_SMB_PRTCL_QUICK; |
| read_write = I2C_SMBUS_WRITE; |
| break; |
| |
| case I2C_SMBUS_BYTE: |
| if (read_write == I2C_SMBUS_WRITE) { |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->byte); |
| } |
| protocol |= ACPI_EC_SMB_PRTCL_BYTE; |
| break; |
| |
| case I2C_SMBUS_BYTE_DATA: |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command); |
| if (read_write == I2C_SMBUS_WRITE) { |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->byte); |
| } |
| protocol |= ACPI_EC_SMB_PRTCL_BYTE_DATA; |
| break; |
| |
| case I2C_SMBUS_WORD_DATA: |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command); |
| if (read_write == I2C_SMBUS_WRITE) { |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->word); |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + 1, |
| data->word >> 8); |
| } |
| protocol |= ACPI_EC_SMB_PRTCL_WORD_DATA | pec; |
| break; |
| |
| case I2C_SMBUS_BLOCK_DATA: |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command); |
| if (read_write == I2C_SMBUS_WRITE) { |
| len = min_t(u8, data->block[0], 32); |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_BCNT, len); |
| for (i = 0; i < len; i++) |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + i, |
| data->block[i + 1]); |
| } |
| protocol |= ACPI_EC_SMB_PRTCL_BLOCK_DATA | pec; |
| break; |
| |
| case I2C_SMBUS_I2C_BLOCK_DATA: |
| len = min_t(u8, data->block[0], 32); |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command); |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_BCNT, len); |
| if (read_write == I2C_SMBUS_WRITE) { |
| for (i = 0; i < len; i++) { |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + i, |
| data->block[i + 1]); |
| } |
| } |
| protocol |= ACPI_EC_SMB_PRTCL_I2C_BLOCK_DATA; |
| break; |
| |
| case I2C_SMBUS_PROC_CALL: |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command); |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA, data->word); |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + 1, data->word >> 8); |
| protocol = ACPI_EC_SMB_PRTCL_PROC_CALL | pec; |
| read_write = I2C_SMBUS_READ; |
| break; |
| |
| case I2C_SMBUS_BLOCK_PROC_CALL: |
| protocol |= pec; |
| len = min_t(u8, data->block[0], 31); |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_CMD, command); |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_BCNT, len); |
| for (i = 0; i < len; i++) |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_DATA + i, |
| data->block[i + 1]); |
| protocol = ACPI_EC_SMB_PRTCL_BLOCK_PROC_CALL | pec; |
| read_write = I2C_SMBUS_READ; |
| break; |
| |
| default: |
| ACPI_DEBUG_PRINT((ACPI_DB_WARN, "EC SMBus adapter: " |
| "Unsupported transaction %d\n", size)); |
| return (-1); |
| } |
| |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_ADDR, addr << 1); |
| acpi_ec_smb_write(smbus, ACPI_EC_SMB_PRTCL, protocol); |
| |
| acpi_ec_smb_read(smbus, ACPI_EC_SMB_STS, temp + 0); |
| |
| if (~temp[0] & ACPI_EC_SMB_STS_DONE) { |
| xudelay(500); |
| acpi_ec_smb_read(smbus, ACPI_EC_SMB_STS, temp + 0); |
| } |
| if (~temp[0] & ACPI_EC_SMB_STS_DONE) { |
| xmsleep(ACPI_EC_SMB_ACCESS_SLEEP2); |
| acpi_ec_smb_read(smbus, ACPI_EC_SMB_STS, temp + 0); |
| } |
| if ((~temp[0] & ACPI_EC_SMB_STS_DONE) |
| || (temp[0] & ACPI_EC_SMB_STS_STATUS)) { |
| return (-1); |
| } |
| |
| if (read_write == I2C_SMBUS_WRITE) { |
| return (0); |
| } |
| |
| switch (size) { |
| |
| case I2C_SMBUS_BYTE: |
| case I2C_SMBUS_BYTE_DATA: |
| acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA, &data->byte); |
| break; |
| |
| case I2C_SMBUS_WORD_DATA: |
| case I2C_SMBUS_PROC_CALL: |
| acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA, temp + 0); |
| acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA + 1, temp + 1); |
| data->word = (temp[1] << 8) | temp[0]; |
| break; |
| |
| case I2C_SMBUS_BLOCK_DATA: |
| case I2C_SMBUS_BLOCK_PROC_CALL: |
| len = 0; |
| acpi_ec_smb_read(smbus, ACPI_EC_SMB_BCNT, &len); |
| len = min_t(u8, len, 32); |
| case I2C_SMBUS_I2C_BLOCK_DATA: |
| for (i = 0; i < len; i++) |
| acpi_ec_smb_read(smbus, ACPI_EC_SMB_DATA + i, |
| data->block + i + 1); |
| data->block[0] = len; |
| break; |
| } |
| |
| return (0); |
| } |
| |
| static u32 acpi_ec_smb_func(struct i2c_adapter *adapter) |
| { |
| |
| return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | |
| I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | |
| I2C_FUNC_SMBUS_BLOCK_DATA | |
| I2C_FUNC_SMBUS_PROC_CALL | |
| I2C_FUNC_SMBUS_BLOCK_PROC_CALL | |
| I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC); |
| } |
| |
| static const struct i2c_algorithm acpi_ec_smbus_algorithm = { |
| .smbus_xfer = acpi_ec_smb_access, |
| .functionality = acpi_ec_smb_func, |
| }; |
| |
| static int acpi_ec_hc_add(struct acpi_device *device) |
| { |
| int status; |
| unsigned long val; |
| struct acpi_ec_hc *ec_hc; |
| struct acpi_ec_smbus *smbus; |
| |
| if (!device) { |
| return -EINVAL; |
| } |
| |
| ec_hc = kzalloc(sizeof(struct acpi_ec_hc), GFP_KERNEL); |
| if (!ec_hc) { |
| return -ENOMEM; |
| } |
| |
| smbus = kzalloc(sizeof(struct acpi_ec_smbus), GFP_KERNEL); |
| if (!smbus) { |
| kfree(ec_hc); |
| return -ENOMEM; |
| } |
| |
| ec_hc->handle = device->handle; |
| strcpy(acpi_device_name(device), ACPI_EC_HC_DEVICE_NAME); |
| strcpy(acpi_device_class(device), ACPI_EC_HC_CLASS); |
| acpi_driver_data(device) = ec_hc; |
| |
| status = acpi_evaluate_integer(ec_hc->handle, "_EC", NULL, &val); |
| if (ACPI_FAILURE(status)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Error obtaining _EC\n")); |
| kfree(ec_hc); |
| kfree(smbus); |
| return -EIO; |
| } |
| |
| smbus->ec = acpi_driver_data(device->parent); |
| smbus->base = (val & 0xff00ull) >> 8; |
| smbus->alert = val & 0xffull; |
| |
| smbus->adapter.owner = THIS_MODULE; |
| smbus->adapter.algo = &acpi_ec_smbus_algorithm; |
| smbus->adapter.algo_data = smbus; |
| |
| if (i2c_add_adapter(&smbus->adapter)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_WARN, |
| "EC SMBus adapter: Failed to register adapter\n")); |
| kfree(smbus); |
| kfree(ec_hc); |
| return -EIO; |
| } |
| |
| ec_hc->smbus = smbus; |
| |
| printk(KERN_INFO PREFIX "%s [%s]\n", |
| acpi_device_name(device), acpi_device_bid(device)); |
| |
| return AE_OK; |
| } |
| |
| static int acpi_ec_hc_remove(struct acpi_device *device, int type) |
| { |
| struct acpi_ec_hc *ec_hc; |
| |
| if (!device) { |
| return -EINVAL; |
| } |
| ec_hc = acpi_driver_data(device); |
| |
| i2c_del_adapter(&ec_hc->smbus->adapter); |
| kfree(ec_hc->smbus); |
| kfree(ec_hc); |
| |
| return AE_OK; |
| } |
| |
| static int __init acpi_ec_hc_init(void) |
| { |
| int result; |
| |
| result = acpi_bus_register_driver(&acpi_ec_hc_driver); |
| if (result < 0) { |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| static void __exit acpi_ec_hc_exit(void) |
| { |
| acpi_bus_unregister_driver(&acpi_ec_hc_driver); |
| } |
| |
| struct acpi_ec_hc *acpi_get_ec_hc(struct acpi_device *device) |
| { |
| return acpi_driver_data(device->parent); |
| } |
| |
| EXPORT_SYMBOL(acpi_get_ec_hc); |
| |
| module_init(acpi_ec_hc_init); |
| module_exit(acpi_ec_hc_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Ducrot Bruno"); |
| MODULE_DESCRIPTION("ACPI EC SMBus driver"); |