| /* |
| * watchdog_dev.c |
| * |
| * (c) Copyright 2008-2011 Alan Cox <alan@lxorguk.ukuu.org.uk>, |
| * All Rights Reserved. |
| * |
| * (c) Copyright 2008-2011 Wim Van Sebroeck <wim@iguana.be>. |
| * |
| * |
| * This source code is part of the generic code that can be used |
| * by all the watchdog timer drivers. |
| * |
| * This part of the generic code takes care of the following |
| * misc device: /dev/watchdog. |
| * |
| * Based on source code of the following authors: |
| * Matt Domsch <Matt_Domsch@dell.com>, |
| * Rob Radez <rob@osinvestor.com>, |
| * Rusty Lynch <rusty@linux.co.intel.com> |
| * Satyam Sharma <satyam@infradead.org> |
| * Randy Dunlap <randy.dunlap@oracle.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * Neither Alan Cox, CymruNet Ltd., Wim Van Sebroeck nor Iguana vzw. |
| * admit liability nor provide warranty for any of this software. |
| * This material is provided "AS-IS" and at no charge. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> /* For module stuff/... */ |
| #include <linux/types.h> /* For standard types (like size_t) */ |
| #include <linux/errno.h> /* For the -ENODEV/... values */ |
| #include <linux/kernel.h> /* For printk/panic/... */ |
| #include <linux/fs.h> /* For file operations */ |
| #include <linux/watchdog.h> /* For watchdog specific items */ |
| #include <linux/miscdevice.h> /* For handling misc devices */ |
| #include <linux/init.h> /* For __init/__exit/... */ |
| #include <linux/uaccess.h> /* For copy_to_user/put_user/... */ |
| |
| /* make sure we only register one /dev/watchdog device */ |
| static unsigned long watchdog_dev_busy; |
| /* the watchdog device behind /dev/watchdog */ |
| static struct watchdog_device *wdd; |
| |
| /* |
| * watchdog_ping: ping the watchdog. |
| * @wddev: the watchdog device to ping |
| * |
| * If the watchdog has no own ping operation then it needs to be |
| * restarted via the start operation. This wrapper function does |
| * exactly that. |
| */ |
| |
| static int watchdog_ping(struct watchdog_device *wddev) |
| { |
| if (wddev->ops->ping) |
| return wddev->ops->ping(wddev); /* ping the watchdog */ |
| else |
| return wddev->ops->start(wddev); /* restart the watchdog */ |
| } |
| |
| /* |
| * watchdog_write: writes to the watchdog. |
| * @file: file from VFS |
| * @data: user address of data |
| * @len: length of data |
| * @ppos: pointer to the file offset |
| * |
| * A write to a watchdog device is defined as a keepalive ping. |
| */ |
| |
| static ssize_t watchdog_write(struct file *file, const char __user *data, |
| size_t len, loff_t *ppos) |
| { |
| size_t i; |
| char c; |
| |
| if (len == 0) |
| return 0; |
| |
| for (i = 0; i != len; i++) { |
| if (get_user(c, data + i)) |
| return -EFAULT; |
| } |
| |
| /* someone wrote to us, so we send the watchdog a keepalive ping */ |
| watchdog_ping(wdd); |
| |
| return len; |
| } |
| |
| /* |
| * watchdog_ioctl: handle the different ioctl's for the watchdog device. |
| * @file: file handle to the device |
| * @cmd: watchdog command |
| * @arg: argument pointer |
| * |
| * The watchdog API defines a common set of functions for all watchdogs |
| * according to their available features. |
| */ |
| |
| static long watchdog_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| unsigned int val; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(argp, wdd->info, |
| sizeof(struct watchdog_info)) ? -EFAULT : 0; |
| case WDIOC_GETSTATUS: |
| val = wdd->ops->status ? wdd->ops->status(wdd) : 0; |
| return put_user(val, p); |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(wdd->bootstatus, p); |
| case WDIOC_KEEPALIVE: |
| if (!(wdd->info->options & WDIOF_KEEPALIVEPING)) |
| return -EOPNOTSUPP; |
| watchdog_ping(wdd); |
| return 0; |
| default: |
| return -ENOTTY; |
| } |
| } |
| |
| /* |
| * watchdog_open: open the /dev/watchdog device. |
| * @inode: inode of device |
| * @file: file handle to device |
| * |
| * When the /dev/watchdog device gets opened, we start the watchdog. |
| * Watch out: the /dev/watchdog device is single open, so we make sure |
| * it can only be opened once. |
| */ |
| |
| static int watchdog_open(struct inode *inode, struct file *file) |
| { |
| int err = -EBUSY; |
| |
| /* the watchdog is single open! */ |
| if (test_and_set_bit(WDOG_DEV_OPEN, &wdd->status)) |
| return -EBUSY; |
| |
| /* |
| * If the /dev/watchdog device is open, we don't want the module |
| * to be unloaded. |
| */ |
| if (!try_module_get(wdd->ops->owner)) |
| goto out; |
| |
| err = wdd->ops->start(wdd); |
| if (err < 0) |
| goto out_mod; |
| |
| /* dev/watchdog is a virtual (and thus non-seekable) filesystem */ |
| return nonseekable_open(inode, file); |
| |
| out_mod: |
| module_put(wdd->ops->owner); |
| out: |
| clear_bit(WDOG_DEV_OPEN, &wdd->status); |
| return err; |
| } |
| |
| /* |
| * watchdog_release: release the /dev/watchdog device. |
| * @inode: inode of device |
| * @file: file handle to device |
| * |
| * This is the code for when /dev/watchdog gets closed. |
| */ |
| |
| static int watchdog_release(struct inode *inode, struct file *file) |
| { |
| int err; |
| |
| err = wdd->ops->stop(wdd); |
| if (err != 0) { |
| pr_crit("%s: watchdog did not stop!\n", wdd->info->identity); |
| watchdog_ping(wdd); |
| } |
| |
| /* Allow the owner module to be unloaded again */ |
| module_put(wdd->ops->owner); |
| |
| /* make sure that /dev/watchdog can be re-opened */ |
| clear_bit(WDOG_DEV_OPEN, &wdd->status); |
| |
| return 0; |
| } |
| |
| static const struct file_operations watchdog_fops = { |
| .owner = THIS_MODULE, |
| .write = watchdog_write, |
| .unlocked_ioctl = watchdog_ioctl, |
| .open = watchdog_open, |
| .release = watchdog_release, |
| }; |
| |
| static struct miscdevice watchdog_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &watchdog_fops, |
| }; |
| |
| /* |
| * watchdog_dev_register: |
| * @watchdog: watchdog device |
| * |
| * Register a watchdog device as /dev/watchdog. /dev/watchdog |
| * is actually a miscdevice and thus we set it up like that. |
| */ |
| |
| int watchdog_dev_register(struct watchdog_device *watchdog) |
| { |
| int err; |
| |
| /* Only one device can register for /dev/watchdog */ |
| if (test_and_set_bit(0, &watchdog_dev_busy)) { |
| pr_err("only one watchdog can use /dev/watchdog.\n"); |
| return -EBUSY; |
| } |
| |
| wdd = watchdog; |
| |
| err = misc_register(&watchdog_miscdev); |
| if (err != 0) { |
| pr_err("%s: cannot register miscdev on minor=%d (err=%d).\n", |
| watchdog->info->identity, WATCHDOG_MINOR, err); |
| goto out; |
| } |
| |
| return 0; |
| |
| out: |
| wdd = NULL; |
| clear_bit(0, &watchdog_dev_busy); |
| return err; |
| } |
| |
| /* |
| * watchdog_dev_unregister: |
| * @watchdog: watchdog device |
| * |
| * Deregister the /dev/watchdog device. |
| */ |
| |
| int watchdog_dev_unregister(struct watchdog_device *watchdog) |
| { |
| /* Check that a watchdog device was registered in the past */ |
| if (!test_bit(0, &watchdog_dev_busy) || !wdd) |
| return -ENODEV; |
| |
| /* We can only unregister the watchdog device that was registered */ |
| if (watchdog != wdd) { |
| pr_err("%s: watchdog was not registered as /dev/watchdog.\n", |
| watchdog->info->identity); |
| return -ENODEV; |
| } |
| |
| misc_deregister(&watchdog_miscdev); |
| wdd = NULL; |
| clear_bit(0, &watchdog_dev_busy); |
| return 0; |
| } |