| // SPDX-License-Identifier: GPL-2.0 |
| #include "qcom-msm8974pro.dtsi" |
| #include "qcom-pma8084.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| |
| / { |
| model = "Samsung Galaxy S5"; |
| compatible = "samsung,klte", "qcom,msm8974"; |
| |
| aliases { |
| serial0 = &blsp1_uart1; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| smd { |
| rpm { |
| rpm_requests { |
| pma8084-regulators { |
| compatible = "qcom,rpm-pma8084-regulators"; |
| status = "okay"; |
| |
| pma8084_s1: s1 { |
| regulator-min-microvolt = <675000>; |
| regulator-max-microvolt = <1050000>; |
| }; |
| |
| pma8084_s2: s2 { |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1050000>; |
| }; |
| |
| pma8084_s3: s3 { |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1300000>; |
| }; |
| |
| pma8084_s4: s4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| pma8084_s5: s5 { |
| regulator-min-microvolt = <2150000>; |
| regulator-max-microvolt = <2150000>; |
| }; |
| |
| pma8084_s6: s6 { |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| }; |
| |
| pma8084_l1: l1 { |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| }; |
| |
| pma8084_l2: l2 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| pma8084_l3: l3 { |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| pma8084_l4: l4 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1225000>; |
| }; |
| |
| pma8084_l5: l5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| pma8084_l6: l6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| pma8084_l7: l7 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| pma8084_l8: l8 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| pma8084_l9: l9 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| |
| pma8084_l10: l10 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| |
| pma8084_l11: l11 { |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1300000>; |
| }; |
| |
| pma8084_l12: l12 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| pma8084_l13: l13 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| |
| pma8084_l14: l14 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| pma8084_l15: l15 { |
| regulator-min-microvolt = <2050000>; |
| regulator-max-microvolt = <2050000>; |
| }; |
| |
| pma8084_l16: l16 { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2700000>; |
| }; |
| |
| pma8084_l17: l17 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| }; |
| |
| pma8084_l18: l18 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| }; |
| |
| pma8084_l19: l19 { |
| regulator-min-microvolt = <2900000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| pma8084_l20: l20 { |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| |
| regulator-allow-set-load; |
| regulator-system-load = <200000>; |
| }; |
| |
| pma8084_l21: l21 { |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| |
| pma8084_l22: l22 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| pma8084_l23: l23 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| |
| pma8084_l24: l24 { |
| regulator-min-microvolt = <3075000>; |
| regulator-max-microvolt = <3075000>; |
| }; |
| |
| pma8084_l25: l25 { |
| regulator-min-microvolt = <2100000>; |
| regulator-max-microvolt = <2100000>; |
| }; |
| |
| pma8084_l26: l26 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2050000>; |
| }; |
| |
| pma8084_l27: l27 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1225000>; |
| }; |
| |
| pma8084_lvs1: lvs1 {}; |
| pma8084_lvs2: lvs2 {}; |
| pma8084_lvs3: lvs3 {}; |
| pma8084_lvs4: lvs4 {}; |
| |
| pma8084_5vs1: 5vs1 {}; |
| }; |
| }; |
| }; |
| }; |
| |
| /delete-node/ vreg-boost; |
| }; |
| |
| &soc { |
| serial@f991e000 { |
| status = "ok"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| input-name = "gpio-keys"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_keys_pin_a>; |
| |
| volume-down { |
| label = "volume_down"; |
| gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| linux,code = <KEY_VOLUMEDOWN>; |
| debounce-interval = <15>; |
| }; |
| |
| home-key { |
| label = "home_key"; |
| gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| linux,code = <KEY_HOMEPAGE>; |
| wakeup-source; |
| debounce-interval = <15>; |
| }; |
| |
| volume-up { |
| label = "volume_up"; |
| gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| linux,code = <KEY_VOLUMEUP>; |
| debounce-interval = <15>; |
| }; |
| }; |
| |
| pinctrl@fd510000 { |
| sdhc1_pin_a: sdhc1-pin-active { |
| clk { |
| pins = "sdc1_clk"; |
| drive-strength = <4>; |
| bias-disable; |
| }; |
| |
| cmd-data { |
| pins = "sdc1_cmd", "sdc1_data"; |
| drive-strength = <4>; |
| bias-pull-up; |
| }; |
| }; |
| }; |
| |
| sdhci@f9824900 { |
| status = "ok"; |
| |
| vmmc-supply = <&pma8084_l20>; |
| vqmmc-supply = <&pma8084_s4>; |
| |
| bus-width = <8>; |
| non-removable; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdhc1_pin_a>; |
| }; |
| |
| usb@f9a55000 { |
| status = "ok"; |
| |
| phys = <&usb_hs1_phy>; |
| phy-select = <&tcsr 0xb000 0>; |
| /*extcon = <&smbb>, <&usb_id>;*/ |
| /*vbus-supply = <&chg_otg>;*/ |
| |
| hnp-disable; |
| srp-disable; |
| adp-disable; |
| |
| ulpi { |
| phy@a { |
| status = "ok"; |
| |
| v1p8-supply = <&pma8084_l6>; |
| v3p3-supply = <&pma8084_l24>; |
| |
| /*extcon = <&smbb>;*/ |
| qcom,init-seq = /bits/ 8 <0x1 0x64>; |
| }; |
| }; |
| }; |
| |
| pinctrl@fd510000 { |
| i2c6_pins: i2c6 { |
| mux { |
| pins = "gpio29", "gpio30"; |
| function = "blsp_i2c6"; |
| |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| }; |
| |
| i2c@f9928000 { |
| status = "okay"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c6_pins>; |
| |
| pmic@60 { |
| reg = <0x60>; |
| compatible = "maxim,max77826"; |
| |
| regulators { |
| max77826_ldo1: LDO1 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| max77826_ldo2: LDO2 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| }; |
| |
| max77826_ldo3: LDO3 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| max77826_ldo4: LDO4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| max77826_ldo5: LDO5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| max77826_ldo6: LDO6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| max77826_ldo7: LDO7 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| max77826_ldo8: LDO8 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| max77826_ldo9: LDO9 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| max77826_ldo10: LDO10 { |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| |
| max77826_ldo11: LDO11 { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| |
| max77826_ldo12: LDO12 { |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| max77826_ldo13: LDO13 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| max77826_ldo14: LDO14 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| max77826_ldo15: LDO15 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| max77826_buck: BUCK { |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| }; |
| |
| max77826_buckboost: BUCKBOOST { |
| regulator-min-microvolt = <3400000>; |
| regulator-max-microvolt = <3400000>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &spmi_bus { |
| pma8084@0 { |
| gpios@c000 { |
| gpio_keys_pin_a: gpio-keys-active { |
| pins = "gpio2", "gpio3", "gpio5"; |
| function = "normal"; |
| |
| bias-pull-up; |
| power-source = <PMA8084_GPIO_S4>; |
| }; |
| }; |
| }; |
| }; |
