| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for the iWave RZ/G1H Qseven SOM |
| * |
| * Copyright (C) 2020 Renesas Electronics Corp. |
| */ |
| |
| #include "r8a7742.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| compatible = "iwave,g21m", "renesas,r8a7742"; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0 0x40000000 0 0x40000000>; |
| }; |
| |
| memory@200000000 { |
| device_type = "memory"; |
| reg = <2 0x00000000 0 0x40000000>; |
| }; |
| |
| reg_3p3v: 3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "3P3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| }; |
| |
| &extal_clk { |
| clock-frequency = <20000000>; |
| }; |
| |
| &gpio0 { |
| /* GP0_18 set low to select QSPI. Doing so will disable VIN2 */ |
| qspi_en { |
| gpio-hog; |
| gpios = <18 GPIO_ACTIVE_HIGH>; |
| output-low; |
| line-name = "QSPI_EN"; |
| }; |
| }; |
| |
| &i2c0 { |
| pinctrl-0 = <&i2c0_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| rtc@68 { |
| compatible = "ti,bq32000"; |
| reg = <0x68>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <1 IRQ_TYPE_EDGE_FALLING>; |
| }; |
| }; |
| |
| &mmcif1 { |
| pinctrl-0 = <&mmc1_pins>; |
| pinctrl-names = "default"; |
| |
| vmmc-supply = <®_3p3v>; |
| bus-width = <4>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &pfc { |
| i2c0_pins: i2c0 { |
| groups = "i2c0"; |
| function = "i2c0"; |
| }; |
| |
| mmc1_pins: mmc1 { |
| groups = "mmc1_data4", "mmc1_ctrl"; |
| function = "mmc1"; |
| }; |
| |
| qspi_pins: qspi { |
| groups = "qspi_ctrl", "qspi_data2"; |
| function = "qspi"; |
| }; |
| }; |
| |
| &qspi { |
| pinctrl-0 = <&qspi_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| |
| flash: flash@0 { |
| compatible = "sst,sst25vf016b", "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <50000000>; |
| m25p,fast-read; |
| spi-cpol; |
| spi-cpha; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "bootloader"; |
| reg = <0x00000000 0x000c0000>; |
| read-only; |
| }; |
| partition@c0000 { |
| label = "env"; |
| reg = <0x000c0000 0x00002000>; |
| }; |
| partition@c2000 { |
| label = "user"; |
| reg = <0x000c2000 0x0013e000>; |
| }; |
| }; |
| }; |
| }; |